It's missing on Windows... we had this helper in liquivision.c but since I
used the function in git-access.c I figured I should just turn it into a
little helper.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
save_one_dive_to_mb() is very useful (but there was a namespace collision
with another helper in save_git.c)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Upon successfull reading an image file, this computes a SHA1 hash of the
image and saves it with the picture tag in the log file. When a file is
not successfully loaded (for example because the log was created on a
different computer) we look up the hash in a dictionary that maps hashes
to local file names.
That dictionary (actually two for both directions), is loaded on startup
and saved upon destruction of the main window.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to quote the tick char (') on tags as this is used as XML
attribute.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the last few dozen commits change the format in irreversible ways
and could therefore be destructive and lose data for testers of the
development version, let's try to be extra careful and create "special"
backup files that aren't overwritten by subsequent backups. At least this
way people can go back to the previous state.
Of course people using the git backend don't have to worry about this as
they always can go back to any earlier save.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Read and write divesite sections in the XML file.
Read divelogs of version 2 and create dive site structures on the fly.
Read version 3 files that have divesiteid instead of location / gps.
Saves version 3 files where dives no longer have location and gps but
instead refer to a divesiteid
The commit contains quite a few fprintf(stderr,...) in order to allow
better monitoring of the parsing / transforming of locations and gps to
dive sites. This will need to be removed later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The git sample loader will fill in temperature data from the previous
entry anyway, so saving repeated temperatures is just wasteful.
It turns out that commit 6cf3787a0e ("Remove code that zeroes out
duplicate oxygen sensor and temperature values") removed the explicit
redundant temperature removal in the dive fixup, which had hidden this
issue.
Cc: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is intended to export all the details that someone might copy from a
paper logbook. We need a matching import template to make this simple.
This hasn't been well tested, I'm sure it will break when elements and
attributes are missing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Correct a bug that I introduced previously.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
From 45570d66ecf238aec8997f5d0c20c01dfe0aa4fa Mon Sep 17 00:00:00 2001
From: willem ferguson <willemferguson@zoology.up.ac.za>
Date: Fri, 21 Nov 2014 14:59:14 +0200
Subject: [PATCH] Save-XML: Correct bug in cylinder gas parameters
Correct a bug that I introduced previously
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems that in some scenarios we end up with a string that isn't NUL
terminated and that results in garbage being stored as userid. This patch
is a little brute force but it fixes the problem even if a previous
version os Subsurface ended up adding other text to the end of the userid.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 0d7c192e6e ("For CCR dives, the diluent cylinder is the
current cylinder") a few things got broken. This tries to undo those
changes and adds expanded XML output.
1) Calculate correct partial pressure of oxygen to be plotted on
dive profile, taking into account the oxygen sensor data.
Currently, erroneously, OC PO2 values are shown, due to an
erroneous calling parameter to fill_pressures().
2) Read start and end cylinder pressured correctly. some wrong
assignments were done in file.c. This is now corrected and the correct
cylinder pressures are shown in the equipment tab.
3) Write correct cylinder pressures to XML. Currently the data for
the two cylinders are written to XML the wrong way round
(diluent pressures = oxygen and vice versa).
4) Expand XML output:
a) Write oxygen sensor data to XML
b) Write no_of_02sensors to XML
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change the meaning that _the_ cylinder (as we treat it in OC dives) is the
diluent cylinder (rather than the O2 cylinder). This eliminates special
cases. Now, for CCR, we have to handle the O2 cylinder in addition
(rather than the diluent in addition).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oddly we already had code to load this from XML, but nothing else.
This makes the load from XML work like the rest of our code and adds the
save to XML plus the load and save for the git format.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit 763dfef315.
I didn't pay enough attention when accepting this - it saves redundant
data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If start and end cylinder pressure is not explicitly set for secondary
cylinders, we must store the start and end pressures from the
sample_{start,end} attribute. Faulty behavior is obvious at least when
importing Poseidon logs.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The latest CCR patches had rendered the planner not usable for CCR dives.
This patch corrects this (and reenables the CCR set point column for
segments). The problem was that a new member setpoint of struct divepoint
had been introduced, but there was already po2 which had the same meaning.
This patch merges the two and renames them setpoint to prevent future
confusion.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Decode the gasmix data into a sane format when creating the event, and
add the (currently unused) ability to specify a gas change to a
particular cylinder rather than (or in addition to) the gasmix.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To obey <xsl:output omit-xml-declaration="yes"/> element
one should rely on libxslt to do its job instead of writing
document himself.
Discussion on this subject can be found at
http://comments.gmane.org/gmane.comp.gnome.lib.xslt/3839
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have seen isspace(0xC3) return true on windows so we need to do
something about this.
As a wise man said:
Using "isspace()" and friends on anything but the 0-127 range is just
fraught with danger, regardless of platform.
We remedy this by checking that isascii() says that its a 7-bit ascii
character, something isspace() knows how to handle
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since earlier have we had support for our own calculated TTS. This adds
support for holding TTS values reported by a dive computer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed vs unsigned comparisons are such a pain. Since we want offsets to
be +/- 30 minutes around the dive we need to allow negative offsets - but
duration_t was defined as uint32_t.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also change the on file XML to be even easier to read by making it a
duration as well (which gets us '32:34 min' instead of un-typed seconds).
This is backwards compatible, it will happily read what was written with
the previous commit).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It makes no sense to store a 64bit time stamp with every picture. Even the
32bit offset (in seconds) from the dive start is WAY overkill. But
switching to that makes the code much more simple in a number of spots.
And makes what is saved to the XML file easier to read, too.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Save the timestamp of the dive if it exists in the data provided
by the exif library.
[Dirk Hohndel: fixed whitespace and format specifier]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move the quote function to membuffer.c and adding wrappers that call
it from both xml and html exporters to get rid of redundancy.
Quote the location, buddy, suit, tags and notes This
prevents js code from crashing.
[Miika Turkia: minor whitespace and code fix]
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) All the variables in the sample structures are strongly typed
2) Two additional types were declared in units.h:
o2pressure_t
bearing_t
3) The following variables were added:
diluentpressure
o2setpoint
o2sensor[3]
4) Changes to a number of files were made to chanf
sample->po2 to sample->po2.mbar
bearing to bearring.degrees
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code correctly saves the added pictures on the xml backend.
next: git backend.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: this overlapped with my commit 09e7c61fee ("Consistently
use for_each_dive (and use it correctly)") so I took the
pieces that I had missed]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This simplifies the logic and doesn't rely on show_utf8 to print empty
blocks.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code found the trailing spaces and just didn't care about it.
This also removes the FIXME quoting, because quoting is managed.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
They aren't null pointers after you touched them, so we can't rely on
that to choose if we should use put_string or show_utf8.
show_utf8 would not print the tag if it only contains a \0 as body.
Fixes#440
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes the bug in #440 by accident, and introduces lots of empty
attributes and tags in the xml.
This reverts commit 6378bfd91e.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds an item to File menu to export all dives in CSV format.
Naturally this includes also the code to perform the export.
Fixes#434
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This bug don't exists when saving to git storage, only when saving XML.
The latitude and longitude were being discarded if the location name was
not set and this breaks some users workflow. Not nice.
This should fix the final missing part for bug #440Fixes#440
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a preferences setting, it should belong to the preferences
structure.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The userid of Subsurface Webservice can be included in locally saved xml
files and git repository.
For xml files, it is stored in userid tag. For git repo, it is stored
in 00-Subsurface file present in the repo.
Preference dialog and webservice dialog modified to include option
for saving userid locally.
In case of difference in default userid and userid in local file,
some semantics are followed. These can be referred to here:
http://lists.hohndel.org/pipermail/subsurface/2014-April/011422.htmlFixes#473
Signed-off-by: Venkatesh Shukla <venkatesh.shukla.eee11@iitbhu.ac.in>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit e70bbb637e
Linus' solution in commit 27c36ec4cf ("Improved handling of git syntax
names with no git repository") is much better and makes my hack
unnecessary.
Before this change when the user gave a git style filename, say
/tmp/mydives[myname], if Subsurface couldn't create a repository with that
branch, it instead saved an XML file to this exact name, with '[' and ']'.
That clearly is not the desired behavior, so report an error instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Note! This just returns the error (and uses "report_error()" to generate
a string that is currently printed to stderr). Nothing actually *uses*
that error return yet, and we don't show the error string in the GUI.
Baby steps.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes subsurface remember the git source commit of the dive data.
If you save to an existing branch, subsurface will now complain and
refuse to save if you try to save if the existing branch is not related
to the original source. That would destroy the history of the dive
data, which in turn would make it impossible to do sane merging of the
data.
If you save to a new branch, it will see if the previous parent commit
is known in the repository you are saving to, and will save parenthood
information if so. Otherwise it will save it as a new parentless commit
("root commit" in git parlance).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
