The cylinder undo commands will keep a copy of a cylinder
and therefore need the ability to free a cylinder object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We have a clone_weightsystem function. For symmetry, introduce
a clone_cylinder() function so that we can more-or-less copy&paste
the weightsystem undo code for cylinder undo.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The weightsystem info for new weightsystem types is added by the
undo command. Remove this redundant code. Use the lookup only to
determine the weight and the canonical name (i.e. use the capitalization
according to the saved entry, in analogy to tanks).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the wightsystem-type and cylinder-type delegates, when entering
data, when entering known weight- or cylinder-types, some ui fields
(notably weight, size and working-pressure) are automatically filled
out. The search was using the default flags provided by Qt: starts-with
and case-insensitive.
This had a few strange effects, when entering a string that is the
beginning of a known string (e.g. "AL6" when "AL63" already exists):
1) The wrong data was used if the new string didn't exist.
2) For cylinders it was impossible to create new cylinder types whose
name is the starting string of a different type.
3) For weights, the new type was not added to the list of known types.
This, however, is no problem, because it will be added by the undo
command anyway. A future commit will address that redundancy.
Therefore use only the case-insensitive flag (which has to be performed
by passing the MatchFixedString flag - very weird).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user switches away from Subsurface-mobile and back while we are
in our initialization phase, that code might run more than once leading
to undesirable results.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The strange enum casts (that apparently we needed in order to have strongly typed
enums in QML) are really ugly and confusing in the code. Since we had this three
times it seemed worth to create a little helper that hides this nonsense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We know that we have valid credentials, so calling openLocalThenRemote()
makes no sense, worse, it doesn't respect the special case of
transitioning between accounts. That's the whole point of having a
separate loadDivesWithValidCredentials() call.
Once we have transitioned state, we need to record the now current state
as the old state so that future transitions will work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The noCloud variable contains our desired state, we need to test for the
previous state for this to make sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We haven't supported the GPS web service for a long time.
Also, add another message for the log to be able to more easily trace
one error case.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we're using the undo stack for determining the whether there are
unsaved changes, we have to mark the undo stack as clean after save.
This duplicates code from desktop. It is planned to unify this in
the near future.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In analogy to desktop, also consider the state of the undo-stack when
testing for unsaved changes. This prevents us from missing changes.
This adds duplicate code, which will be unified in the near future.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These appear to be the only cases where we forgot to ensure data is
saved. And pastDiveData is currently not called as the UI to use it has
been removed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code was using the pre-editing dive site name, which appears
weird. Not sure if that was on purpose.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
QMLManager::checkLocation() would only return true if the
dive-site itself was changed, not if the dive-site was set
to a different site.
Thus, in some cases edit events could be lost.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Calling saveChangesLocal() seems like the right thing to do, but it
doesn't do anything useful if the dive list hasn't been marked as
changed. The correct helper function to call is changesNeedSaving()
which makes sure we save the changes and update all UI information.
[Berthold: since this removes the last QML caller of saveChangesLocal()
we can make that function private.]
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This way the launch screen is shown significantly shorter on a device,
and instead the user sees our progress notifications.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This test makes no sense on other platforms (and the log file text is
frankly confusing when not running on Android).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have convinced ourselves that only the main thread will ever trigger
a save operation, therefore the locking is not needed (and it has
recently started to cause user problems where local changes aren't saved
to storage and get lost).
Fixes#2718
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QML documentation recommends against using the cacheBuffer for longer
lists and doing more testing shows that this really doesn't help at all.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Small optimization that reduces the number of accesses to the underlying
model. Instead of evaluating the isInvalid member eight times per
delegate, we only check it once.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Without this check we'll show the 'Please tap the plus botton...'
notification during app initialization as we are showing the initial set
of messages - which makes no sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of not showing a notification until after we are done loading
the data into our models, tell the user that we are about to do that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Until the app is initialized, we have problems getting the 'floating'
passive notifications to show up and be useful. Instead update the user
by filling a text block on the otherwise empty initial page of the app.
Delay the switch to the dive list until the app is initialized and then
use the passive notifications again. While we are initializing also show
a busy spinner so the user doesn't think the app is hung.
As a side effect of this change, the dive list isn't shown until our
models are initialized. And strangely this causes every single possible
delegate to be instantiated. We can prevent that by not setting the dive
list model until after we are done setting up the model.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This simply passes the text to the existing notification text mechanism.
The call to processEvents() ensures that Qt processes the UI events
after we updated the notification and that the user gets timely updates;
otherwise the UI might look like the app is hanging.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Especially on slower devices with a large dive list the startup time has
become really long. This callback allows us to give the user an idea of
what the app is doing during that time.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing the dive site of a dive, the dive-table of the
corresponding dive site was not properly updated by the undo
commands. Try to get this right.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Our builds fail because we are missing pkg-config.
I'm not quite sure if this is triggered by a new dependency or if pkg-config
used to be there and now isn't. Either way, this should hopefully fix things.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know why this is suddenly needed and wasn't before, but hopefully
this fixes the broken builds on GitHub.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In an attempt to reduce the number of global variables, don't use
a local buffer to store the currently loaded git-id. The git-id
itself is still a global variable, which in the future can hopefully
be encapsulated in a "struct File" or similar.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The inconsistent-missing-override warning is annoying as it prevents
us from adding "override" modifiers: It will warn if we do this only
for selected functions. Sadly, this is the default on clang. Therefore,
we disable this warning for quite some time in CMakeLists.txt. For
consistency also do this in the Subsurface-mobile.pro file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In DivelogsDeWebServices::updateProgress() QProgressBar::setRange()
and QProgressBar::setValue() were passed floats even though they
expect ints. To silence a compiler warning, cast by hand. Use the
lrint() function, since we generally do it this way. However,
it is not clear whether this is necessary here.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was triggered by a change in enabled, but what is really changing is
the visible property. This should work better.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Especially on smaller screens we had issues fitting this on the screen.
And it looks fine on larger screens as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was using the myData alias that exists in the dive list but not on
the dive details. This might work (because the models both use the same
underlying base model), but given that we are using the currentItem of
this ListView, I'm guessing that this would just silently fail (maybe
with a warning in the log).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A second tap on the back button will then end add/edit or close the dive
details and get us back to the dive list.
This fixes an issue where tapping on back with the context menu open
would bring you back to the dive list with the context menu still open,
and because then change the text in the context menu as those are
designed differently.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Do this in analogy to other types. However, here we have to convert
from / to QString. We could do this in an even more general way
by using two templat parameters: one for the Qt type, one for the
core type and define conversion functions. However, let's not do
this for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some dive-editing undo commands have trivial setter and getter
functions: they simply read and write a struct dive member.
Autogenerate these in a template to which we pass a pointer
to member as template argument.
For the invalid-flag we have to turn the edit command from int
to bool, since that is how the flag is store in the dive struct.
Sadly, quite a number of the setters do funky things and we
cannot autogenerate them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
