While this appears to work fine when tested individually, when running
as part of the GitHub actions it causes random failures. This needs to
be rethought.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
TestGitStorage is used in all test runs, which results in occasional errors
because two test runs step on each other. This allows us to use different
accounts in different runs.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's silly to set up the URL and email in almost every function. Instead do it
once at the start and reuse that information.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The getter returns alwayes in m/1000, making the calculations
identical, independent if the system is in Metric or Imperial units.
Correct getter test cases.
Signed-off-by: Jan Iversen <jan@casacondor.com>
When unit system Imperial is properly activated, these test cases
have wrong values, and thus fail.
Use correct values.
Signed-off-by: Jan Iversen <jan@casacondor.com>
reactivate deco2 test case, after problem is solved in plannerShared.
Also add a commit on bottompo2/decopo2 in imperial mode, that do not
use PSI as expected.
Signed-off-by: Jan Iversen <jan@casacondor.com>
The default behavior of parse_file() is different between a desktop build
and a mobile build. This makes parse_file() always assume that it's ok to
connect to the cloud.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
PSI is not implemented for diveplanner
Bestmixend in feet is not implemented for diveplanner
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 5.13 (and maybe 5.12) introduced new macros for QUICK_TEST_MAIN_WITH_SETUP
and as testQML is loosely based on this macro it needs to be redesigned.
Before Qt 5.11 it was not possible to do QML testing that depended on
classes being registred with the macro QUICK_TEST_MAIN_WITH_SETUP,
therefore it was nessecary to make an independent implementation of
main().
For now, let the main do a "return 0", to keep the test in the loop.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Font size are never stored on disk for the mobile version,
so testing load/save does not make sense.
add #ifndef SUBSURFACE_MOBILE
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There were several issues with these tests, including checking
the value argument against bool values even if the underlying
preference isn't bool.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit contains the researched values used for
diveplanning, which form the basis for the test cases.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Use updated CMakeLists to activate TestPlannerShared
but only for mobile builds !!
This is due to the fact that commands are currently
not available for mobile builds.
Using the mobile library version of qt-mobile secured
diveplannermodel.cpp is compiled without referencces to
commands.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Use string literals to communicate with QML.
Instead of passing arounds enum/int value, it seems easier to pass string literals to QML and have that code respond to those
Signed-off-by: Jan Iversen <jani@apache.org>
Write a test program to test the log tab in the preferences main menu
I am a bit skeptical about the accuracy of the last section that
delas with testing signals.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a tab for dive log - related preferences.
A suitable test programs is still required.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a companion for the new Media tab in the Preferences UI
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the preference settings dealing with thumbnails (currently under
General preferences and Profile preferences) and put them in a newly-created
Media preference tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the "Show unused cylinders" checkbox (Profile tab) and the
"Set default cylinder" qTextEdit box (General tab) and put them in a
separate and new Equipment tab. This sounds like a simple task but,
as can be seen from the files changed, was actually a complex matter.
Adapt the existing test programs (General and TechDetails) for creating
a test program that tests parts of the Equipment tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declarations of the "report_error()" and "set_error_cb()"
functions and the "verbose" variable to errorhelper.h.
Thus, error-reporting translation units don't have to import the
big dive.h header file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions were spread out over dive.c and divelist.c.
Move them into their own file to make all this a bit less monolithic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make dive.h a bit slimmer. It's only a drop in the bucket - but at
least when modifying tag functions not the *whole* application is
rebuilt anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The Information tab shows the atmospheric pressure. Make this value editable
and also ensure that changes to it are undo-able.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
The application state was encoded in a QByteArray. Thus, there was
no compile-time checking. Typos would lead to silent failures.
Turn the application state into an enum. Use the enum-class construct,
so that the values don't polute the global namespace. Moreover,
this makes them strongly typed, i.e. they don't auto-convert to
integers.
A disadvantage is that the enums now have to be cast to int
explicitly when used to index an array.
Replace two hash-maps in MainWindow to arrays of fixed sizes.
Move the application-state details into their own files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The handling of dive site merging changed and therefore the tests
have to be adapted.
1) Dive sites are recognized as identical based on their name.
Therefore, give the dive sites that should be merged the same name.
2) The dive site id of the first imported dive is kept. Thus,
merge and reverse merge produce two different output files.
Create a second file reflecting that fact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a dive site table to each dive site to keep track of dives
that have been added to a dive site. Add two functions to add
dives to / remove dives from dive sites.
Since dive sites now contain a dive table, the order of includes
had to be changed: "divesite.h" now includes "dive.h" and not
vice-versa. This caused some include churn.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declaration of these functions to "file.h" and "parse.h"
according to the translation unit they are defined in. Thus, not
all users of "dive.h" have to suck in "sqlite3.h".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As opposed to dive trips, dive sites were always directly added
to the global table, even on import. Instead, parse the divesites
into a distinct table and merge them on import.
Currently, this does not do any merging of dive sites, i.e. dive
sites are considered as either equal or different. Nevertheless,
merging of data should be rather easy to implement and simply
follow the code of the dive merging.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To extend the undo system to dive sites, the importers and downloaders
must not parse directly into the global dive site table. Instead,
pass a dive_site_table argument to parse into.
For now, always pass the global dive_site_table so that this commit
should not cause any functional change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To enable undo of dive site functions, it is crucial to work
with different dive site tables. Therefore add a dive site table
parameter to dive site functions. For now, always pass the global
dive site table. Thus, this commit shouldn't alter any functionality.
After this change, a simple search for dive_site_table reveals all
places where the global dive site table is accessed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This allows calling ctest from the main build directory instead of having to
change one level down. As a bonus the unittests now show up in my KDevelop so I
can directly run them from the IDE.
Signed-off-by: Rolf Eike Beer <eike@sf-mail.de>
These two member functions were never used, but cause frequent
recompilation of the qPref.cpp file. Remove them for now until
their usefulness becomes evident.
These were the only functions tested in test_qPref.qml. Therefore
remove this test-file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
process_imported_dives() takes four boolean parameters. Replace these
by flags. This makes the function calls much more descriptive. Morover,
it becomes easier to add or remove flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
