Commit graph

220 commits

Author SHA1 Message Date
Dirk Hohndel
08c42813e5 Revert "In statistics, ignore gas use of planned dives"
This reverts commit 1d8662006c.

Mistakenly pushed to master

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-02-03 07:31:03 -08:00
Robert C. Helling
1d8662006c In statistics, ignore gas use of planned dives
When merged with real dives, those would double count otherwise.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-02 12:37:24 -08:00
Robert C. Helling
a031dbbbd8 When merging planned dives keep all cylinders
When merging a real dive with a planned dive (for comparison),
we should not try to be clever in merging similar cylinders,
rather keep the union of both cylinder sets as the two versions
of the dive might differ in exctly which gas and how much of it
was used.

Increase MAX_CYLINDERS to 20 to make room for this.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-02 12:36:08 -08:00
Robert C. Helling
c1dc0c9ce0 Allow user to disable a cylinder in planner
In the cylinder table, the last column ("use") always showed
OC-GAS. Editing was enabled, but the user had to guess to enter
a small integer meaning dilluent or CCR oxygen cylingder. I guess,
nobody has ever done that.

This patch makes this column clickable. A click toggles if the cylinder
is used for planning or not. This wait it is much easier to investigate
the consequences of gas loss on a plan.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-01-23 22:11:51 -08:00
Robert C. Helling
7725842383 Use real gas compressibility in planner
Modify formluas for gas use to take into account the
compressibility correction for real gases. This introduces
also the inverse formula to compute the pressure for a given
amount of gas.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-01-16 03:17:40 -08:00
Robert C. Helling
43599742a3 Display surface interval in diveplan
...instead of just stating "repetitive dive". As requested by
a user.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-01-03 22:28:18 -08:00
Robert C. Helling
c1ef59c540 Indicate a repetitive dive in the diveplan
Fixes #1095

Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-12-26 12:47:57 -08:00
Robert C. Helling
4d0d37b690 Show effective gradient factors for VPMB-plans
For each stop, this computes an effective gradient factor
that gives the same ceiling. Then, it does linear regression
to find values for GFlow and GFhigh that give a similar deco
profile.

Note that this optimises the average gradient factor. The
runtime however depends strongly at the gradient factor at
the last depth. So we don't necessarily to get the runtime
right.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-24 09:59:42 +09:00
Rick Walsh
7e09a6c7bc Separate VPM-B conservatism preference for planner and profile
Separate the VPM-B conservatism preference into diveplan.vpmb_conservatism for
planning dives and prefs.vpmb_conservatism for profile ceiling display of
saved dives.

Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-09-24 08:30:11 -07:00
Linus Torvalds
d8a6b917a5 Teach 'interpolate()' about zero-sized ranges
No, they don't make sense.  We should normally not have multiple samples
that are on the same second.  But they seem to happen on the EON Steel
under some circumstances, and instead of dividing by zero when trying to
interpolate across such a sample, do something sane.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-08-29 21:43:19 -07:00
Dirk Hohndel
dcf94bef56 Add new helper for case insensitive string comparison
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-07-24 09:53:24 +09:00
Rick Walsh
ffca5674bf Fixup: don't capitalise best_He
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-07-09 12:08:41 -07:00
Rick Walsh
f08b0e0e3e Planner: automate calculation of best mix for max depth
Add option to calculate the best mix portion of O2 and He for the dive's max
depth if the user enters * in the MOD and MND cylinder fields. Gas portions
are automatically recalculated if the max depth of the dive changes.

Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-07-09 12:08:25 -07:00
Rick Walsh
9fbd11744f Add function to calculate gas maximum narcotic depth
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-07-09 12:08:06 -07:00
Rick Walsh
b1ed04a7f4 Have divedatapoint store cylinder id instead of gasmix
Determining the correct cylinder index from a known gas mix can be
complicated, but it is trivial to look up the gasmix from the cylinder_t
structure.

It makes sense to remember which cylinder is being used. This simplifies
handling changing a cylinder's gas mix, either directly by the user, or
indirectly in the planner. It also permits tracking of multiple cylinders of
the same mix, e.g. independent twins / sidemount.

Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-07-09 12:07:25 -07:00
Rick Walsh
b61b3a8d28 Add functions to calculate best mix
Best mix O2 calculated based on planner Bottom O2 preference
Best mix He calculated based on EAD of 30m (should be made user-configurable)

Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-05-21 07:03:23 -07:00
Dirk Hohndel
3555cadb77 QML UI: don't fetch the remote twice when loading
We first check the sha to see if we want to load at all. But at that
point we already have the repository and the branch and we have synced
with the remote. So when we decide that we need to reload from storage,
we don't need to repeat those steps, instead we can go directly to the
git load.

For that to work we need to pass the repository pointer and the branch
name back to the caller so that we can directly call git_load_dives().

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-04-05 22:57:16 -07:00
Linus Torvalds
e0824ef9f3 Make gas change events always have a cylinder index
In commit df4e26c875 ("Start sanitizing gaschange event information")
back about a year and a half ago, I started sanitizing the gas switch
event data, allowing gas switches to be associated with a particular
cylinder index rather than just the gas mix that is switched to.

But that initial step only _allowed_ a gas switch event to be associated
with a particular cylinder, the primary model was still to just specify
the mix.

This finally takes the next step, and *always* associates a gas switch
event with a particular cylinder.  Instead of then looking up the
cylinder by trying to match gas mixes at runtime, subsurface now looks
it up when loading the dive initially as part of the dive fixup code.

The switch event still has an a separate gas mix associated with it, but
this patch also starts preparing for entirely relying on the gas mix in
the cylinder itself, by starting to pass in not just the event but also
the dive pointer to the routines that look up gas mix details.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-04-04 22:37:18 -07:00
Linus Torvalds
7a444c0210 Make cylinder_nodata() take a const cylinder pointer
Some of the gas mix cleanups I'm doing are in code that uses const
pointers, and wants to use this.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-04-04 22:37:18 -07:00
Dirk Hohndel
7be962bfc2 Move subsurface-core to core and qt-mobile to mobile-widgets
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.

And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.

This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-04-04 22:33:58 -07:00
Renamed from subsurface-core/dive.h (Browse further)