- show the correct gasmix in the profile;
- make gases available for gas switches in the profile after they have
been added;
- persist gas changes;
- add air as a default gas when adding a dive.
This still has problems when undoing a gas switch - instead of
completely removing the gas switch it is just moved to the next point in the
profile.
Signed-off-by: Michael Keller <github@ike.ch>
- standardise the naming;
- use it consistently;
- apply the 'samples < 50' only when putting manually added dives into
edit mode - everywhere else manually added dives should be treated as
such;
- do not show a warning before editing a manually added dive in planner.
Signed-off-by: Michael Keller <github@ike.ch>
Improve the warning shown to the user when closing the application wile
in the planner. We now allow the user to directly discard the planned
dive, save it into the dive log, or cancel the operation altogether.
If they save into the dive log, or if they modified the dive log before
starting the planner, a second warning about the unsaved dive log
changes will be shown.
Signed-off-by: Michael Keller <mikeller@042.ch>
The lambda that created the list of gases took a copy not a
reference of the planned dive. Of course, that never had its
gases updated. Ultimately this would crash, because this sent
an index of "-1" on change.
Fix by
1) Using a reference to the dive, not the copy
2) Catch an invalid "-1" index (by Michael Keller <github@ike.ch>)
Fixes#4188
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the 'Download from dive computer' dialogue, make it possible to
select the source directory for the import.
Signed-off-by: Michael Keller <github@ike.ch>
Currently editing of planned dives that have been merged with actual
(logged) dives only works if the 'Planned dive' divecomputer is the
first divecomputer, and this divecomputer is selected when clicking
'Edit planned dive'. In other cases the profile of the first
divecomputer is overlaid with the profile of the planned dive, and the
first divecomputer's profile is overwritten when saving the dive plan.
Fix this problem.
Triggered by @SeppoTakalo's comment (https://github.com/subsurface/subsurface/issues/1913#issuecomment-2075562119): Users don't like that planned dives show up as their own entries in the dive list, so being able to merge them with the actual dive after it has been executed is a good feature - but this wasn't working well until now.
Signed-off-by: Michael Keller <github@ike.ch>
Add auto-sizing to the extra info table - resize the columns so that all
rows are shown in full whenever the data is updated.
Signed-off-by: Michael Keller <github@ike.ch>
Remove preferences "Dive Download" window. Delete all dive computers no longer needed now that they can be deleted on the import window.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
Remove preferences "Dive Download" window. Delete all dive computers no longer needed now that they can be deleted on the import window.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
Remove preferences "Dive Download" window. Delete all dive computers no longer needed now that they can be deleted on the import window.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
Remove preferences "Dive Download" window. Delete all dive computers no longer needed now that they can be dleted on the import window.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
Remove preferences "Dive Download" window. Delete all dive computers no longer needed now that they can be dleted on the import window.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
The old code was leaking memory. Use std::unique_ptr<> for
ownership management.
This is still very primitive and divetags are kept during
application lifetime. There should probably be some form
of reference counting. And the taglist should not be global,
but attached to the divelog.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only case left is in android.cpp, though that is only compiled
when compiling the full desktop app on Android. I.e. never. So
don't bother for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Let's use std::string in the core. Notably, I'd like to make
the numerous main() functions mostly independent of Qt. Some
things will have to remain, such as argument parsing, of course.
This changes the API: instead of returning an error code and
taking a pointer to the actual return-value, return an
std::optional<std::string>> that is set if the function succeeds.
Returning an empty string in the error case might be simpler,
but oh well...
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the removal of this special case for MacOS was confirmed to be
working in the case of building with bluetooth support in #4120, we should
probably remove it from the code used when building without bluetooth
support as well.
Signed-off-by: Michael Keller <mikeller@042.ch>
If Bluetooth isn't enabled, don't clear non Bluetooth address. There was an earlier concern that USB mount point shouldn't be preserved because they may change. This behavior is different on a Mac where the USB serial mount points tend to be persistent. Michael tested this on Linux and suggested on saving the mount points for Linux and Windows.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
Removed blank lines - forgot that blank lines without a continuation \ would break the macro. Embarrassing to say the least. I need to figure out how to upload tested code into git.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
Removed the MacOs specific code and added comment explaining why ui.device.Text must be set before the ui.bluetoothMode change handler runs.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
Preserve bluetooth address if we have it (don't rescan) and for MacOS save the mount point if we have it. As best as I can tell, the mount points for USB devices do not change on MacOs regardless of the USB port being used.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
Per Michael's suggestion, use isBluetoothAddress as check before skipping Bluetooth scan.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
When switching from a non-bluetooth computer to a bluetooh computer an unnecessary bluetooth scan may be forced. This patch will avoid the scan if the bluetooth device address is known.
Signed-off-by: jme <32236882+notrege@users.noreply.github.com>
The combo-boxes (cylinder type, weightsystem, etc.) were controlled
by global models. Keeping these models up-to-date was very combersome
and buggy.
Create a new model everytime a combobox is opened. Ultimately it
might even be better to create a copy of the strings and switch
to simple QStringListModel. Set data in the core directly and
don't do this via the models.
The result is much simpler and easier to handle.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This fixes a crash condition when opening the cloud from
desktop: The old code passed a NULL pointer that was then
assigned to an std::string, which is not supported.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Q_FOREACH and foreach are anachronisms.
Range based for may cause a performance regression: it can
lead to a copy of shared containers (one reason why Qt's
COW containers are broken). However, as long as there is no
user noticeable delay, there is no point in analyzing each case.
And also no point in slapping an 'asConst' on every container
that is looped over.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing a global variable, pass the filename
from the MainWindow to the dialog. This is supposed to cut
down on the global variable mess.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To avoid memory management woes. These shouldn't be global
variables, but let's fix that later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing a global variable, pass the filename
from the MainWindow to the dialog. This is supposed to cut
down on the global variable mess.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing a global variable, pass the filename
from the MainWindow to the dialog. This is supposed to cut
down on the global variable mess.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is no subclass of ConfigureDiveComputerDialog, so there
seems no reason for protected members.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The memory managements for DeviceDetails was very sketchy.
First of all, sharing a pointer to a structure between threads
seems like a recipe for disaster. Secondly, the structure was
a QObject and when first generated included in the (silly)
Qt object tree, but when generated in the threads it was not.
Clearly, this leaks.
Instead, use value semantics and use local copies of the
structure. I didn't go full length and use std::move to
move the data, because this doesn't work through signals
(which are the wrong abstraction here, but OK) and secondly
I didn't have time to analyze whether the caller still
needs the data after passing it down to the worker thread.
To be able to pass an object through signals, the class
has to be registered in the Qt MetaType system. Super
ugly, but fine for now. Ultimately, this whole thing should
probably be replaced by futures, co-routines, or whatever.
Moreover, this removes the prefix from number of "m_*"
function parameters. By convention, "m_" marks member
variables, which function parameters are not.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
make DeviceDetails a metatype
So that we can pass it as value through the signal/slot system.
(squash with original commit)
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This give compile time checking. In fact, one of the connections was
not working (currentIndexChanged(QString) doesn't exist in newer(?)
Qt versions).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
