In the planner, for recreational mode, there is a setting indicating
the pressure at which the diver should be back at the surface. This
pressure was hardcoded to bar.
Fixes#1027
[Dirk Hohndel: small modifications, more reasonable step for psi,
more reasonable maxima]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Need to discard dive site notes on csv export..
miika
From ab23245e2acee32410fa680d0eaab098af69b5c2 Mon Sep 17 00:00:00 2001
From: Miika Turkia <miika.turkia@gmail.com>
Date: Mon, 21 Mar 2016 17:50:28 +0800
Subject: [PATCH] CSV export: discard dive site notes
The new format of divesite management breaks the CSV export as the notes
of divesites are matched.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently, the gradient factors displayed at the top of the profile are the
gradient factors set in preferences. This is correct for saved dives, but
when planning dives, the gradient factors displayed at the top of the profile
should be the gradient factors used in the plan.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Doing VPM-B calculations for dives outside of the planner has not been
possible because real dive data does not record either:
- reference pressure for the Boyle's law compensation (i.e.
first_stop_pressure), or
- deco_time for the vpmb_next_gradient function used to do the CVA
calculations
However, we can infer these values to be:
- first_stop_pressure is the deepest ceiling in the dive
- deco_time is dive time from the deepest ceiling until the
ceiling clears (or would have cleared if the diver finished
their deco obligations)
With these assumptions, the CVA converges rapidly.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
If we are planning a dive using VPM-B with +x conservatism, we want to
print "VPM-B +x" at the top of the profile, instead of "GF xx/yy".
Accordingly, the variable gradientFactor in profilewidget2.cpp is renamed
decoModelParameters to reflect what it represents.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The unit for the depth parameters ain't meters, its 0.1 meters. This
caused the values stored to be out of range.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise /usr/include does not exist on a clean-ish install
Signed-off-by: Jeroen Massar <jeroen@massar.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As in master: detect Qt path and Homebrew qt5 + preserve that path in
CMAKE_PREFIX_PATH and pass it along to cmake
Signed-off-by: Jeroen Massar <jeroen@massar.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to match the divesites to suppress extra output that breaks the
XML. This is because the divesites are actually gathered by calling a
template.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This copies the picture struct when delegating image handling
to a worker thread to prevent a crashe when main thread
frees the picture upon selecting a different dive.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This drastically improves the time it takes to select a dive
with several pictures at the expense of longer startup and
bigger hash files.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was a reported case of an import of a dive that gave a salinity of
35g/l. This is an actual salinity (an amount of salt in the water) but
for subsurface the salinity is actually the density of the water. So for
too small values of the salinity add the density of fresh water.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We use random numbers for file names, both temporary filename when
creating a zip for divelogs.de upload and for filename on form data for
facebook upload. This does not require for true randomness but we still
want these to not be constant on each run of Subsurface. Thus we need to
initialize the random number generator.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we detect a redundant DC we free the memory reserved for the model.
Thus we need to malloc that memory here.
Fixes#1002
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used to mark CCR dives by having "SP change" event at time 0:00.
As we nowadays mark CCR dives by setting dc->divemode appropriately,
better to convert the old dives to this format as well. This way we do
not have to take the special old format into account on multiple places
in the source.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This attempts to detect the time format when initially importing a CSV
file. Well, only the minutes:seconds notation is detected currently.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This tries to detect the date format when initially reading a CSV file
for importing.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After reserving only the required amount of data for stats_by_type, we
showed an extra DC type on the statistics (no more extra space filled
with 0 at the end of the buffer)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the configure parameters for safety stops on the hwOS(OSTC3)
and OSTC computers.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now with firmware 10.23, the settings behave as they should, and won't
hang the communication.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The index in the fixpopup function was incorrect which caused the user to
need TWO cursor down presses to move to the second element. I changed the
index value so the user now needs only one key press to traverse up/dowm.
Fixes#954
Signed-off-by: krishan Chopra <choprakrishan61@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Copying the entry pointer and assuming that it stays valid is of course totally
bogus. This is most likely the reason for the random crashes people have
observed.
See #992
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 37c10c8fd6 ("Add dive type to statistics window") not enough
space is reserved for the newly introduced array if the dive list as fewer
than 4 entries.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds dive type based division to the "yearly statistics" window.
Thus people can see the stats from individually from OC, CCR, PSCR and
freedive.
See #949
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This hides the start time when viewing trip details.
See #964
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The date comes from the first dive in trip, thus no need to allow
editing (especially since the edited date seems to be discarded in any
case).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will use the depth units from user preferences when exporting the
worldmap.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
automake is recommended by autoconf, but depending on the
configuration, the recommended packages might not be installed. Thus
it is better to have it explicitly listed.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As the group can be something else than dialout on some systems, mention
this on user manual.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The timedepthmode specifies the time in seconds when using si units,
otherwise minutes. This patch implements this support.
Fixes#981
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit d69c9e08af.
While this is a nice improvement, it requires other patches to work
correctly which go beyond what I'm comfortable having in a "quick update
to 4.5".
