SsrfFilterSortProxyModel was a thin wrapper around QFilterSortProxyModel,
which was intended as a convenience class to avoid deriving from the
latter. The filter and sort functions were replaced by simple function
pointers.
Unfortunately, by using function-pointers, the whole thing was rather
weak as these functions do not have state. The last user was removed
in ac8dcd7f65b78958587ba025280ed4c529b0b519. Therefore, remove the
whole class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The location information shows a list of dive sites at the
same location as the edited dive site. This was done by passing
a function to an "SsrfSortFilterProxyModel". Unfortunately,
the latter does only support function pointers without state
and therefore had to access the global "displayed_dive_site"
object.
Replace the SsrfSortFilterProxyModel by a proper subclass of
QSortFilterProxyModel that contains information on the position
and id of the currently edited dive site.
Update the filter model if the location of the dive site changes.
This introduces a behavioral change: editing the GPS location
will lead to an updated list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Planned dives were still added by directly calling core code.
This could confuse the undo-machinery, leading to crashes.
Instead, use the proper undo-command. The problem is that as
opposed to the other AddDive-commands, planned dives may
belong to a trip. Thus, the interface to the AddDive command
was changed to respect the divetrip field. Make sure that
the other callers reset that field (actually, it should never
be set). Add a comment describing the perhaps surprising
interface (the passed-in dive, usually displayed dive, is
reset).
Moreover, a dive cloned in the planner is not assigned a
new number. Thus, add an argument to the AddDive-command,
which expresses whether a new number should be generated
for the to-be-added dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, the filter is recalculated if a filter-entry is changed.
This also happens if the counts of a filter-entry changes. This
is to be avoided, as it causes unnecessary churn.
Therefore, send the proper role with the dataChanged() signal
and add a new slot, which invalidates only if a field with the
Qt::CheckStateRole is changed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of reloading all the filter, only increment / decrement the
count of the entries of added / removed dives.
Originally, this was planned to be done via the signals from the
divelist, but it turned out that this was suboptimal, because
if the filter decides that the new item is selected, this has to
be done *before* adding the dive. Otherwise, it wouldn't be shown.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Ultimately, we want to use a single dive-list and not replicate
it in the Qt-model code. To this goal, let's start with using
the same sort function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The current code cheats when it comes to move dives inside
a trip or move dives between trips: Instead of using the
*MoveRows() functionality, the dives are removed from and
re-added to the respective trips. This loses the selection.
Therefore, remember which of the moved dives are selected
and select them manually after they are re-added.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The command-objects select a current item, but this selection
was not propagated to the front-end. The current item is the
base for keyboard-navigation through the dive-list and therefore
should be set correctly.
It took some experimentation to get the flags right:
QItemSelectionModel::Current
Hopefully, these are the correct flags across all supported
Qt versions!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Select the proper dives after the add, remove, split and merge
dives commands on undo *and* redo. Generally, select the added
dives. For undo of add, remember the pre-addition selection.
For redo of remove, select the closest dive to the first removed
dive.
The biggest part of the commit is the signal-interface between
the dive commands and the dive-list model and dive-list view.
This is done in two steps:
1) To the DiveTripModel in batches of trips. The dive trip model
transforms the dives into indices.
2) To the DiveListView. The DiveListView has to translate the
DiveTripModel indexes to actual indexes via its QSortFilterProxy-
model.
For code-reuse, derive all divelist-changing commands from a new base-class,
which has a flag that describes whether the divelist changed. The helper
functions which add and remove dives are made members of the base class and
set the flag is a selected dive is added or removed.
To properly detect when the current dive was deleted it
became necessary to turn the current dive from an index
to a pointer, because indices are not stable.
Unfortunately, in some cases an index was expected and these
places now have to transform the dive into an index. These
should be converted in due course.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Don't delesect dives, when unregistering them from the backend.
If a previously selected dive is added, select it in the dive-list.
For this purpose introduce a SELECTED_ROLE to query the DiveTripModel
for selected dives.
Unfortunately, when adding multiple selected dives, current_dive_changed
is called for each of them, making this very slow. This will have
to be fixed in subsequent commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Previously, each dive-list modifying function would lead to a
full model reset. Instead, implement proper Qt-model semantics
using beginInsertRows()/endInsertRows(), beginRemoveRows()/
endRemoveRows(), dataChange().
To do so, a DiveListNotifer singleton is generatated, which
broadcasts all changes to the dive-list. Signals are sent by
the commands and received by the DiveTripModel. Signals are
batched by dive-trip. This seems to be an adequate compromise
for the two kinds of list-views (tree and list). In the common
usecase mostly dives of a single trip are affected.
Thus, batching of dives is performed in two positions:
- At command-level to batch by trip
- In DiveTripModel to feed batches of contiguous elements
to Qt's begin*/end*-functions.
This is conceptually simple, but rather complex code. To avoid
repetition of complex loops, the batching is implemented in
templated-functions, which are passed lambda-functions, which
are called for each batch.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
AddDivesToTrip, CreateTrip, AutogroupDives, RemoveAutogenTrips
and MergeTrips basically all did the same thing as RemoveDivesFromTrip,
which was already implemented. Thus, factor our the common functionality
and hook it up to make all these functions undo-able.
Don't do the autogroup-call everytime the dive-list is rebuilt
(that would create innumberable undo-actions), but only on dive-load /
import or if expressly asked by the user [by switching the autogroup
flag].
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive list is fed data by means of a sorted "DiveTripModel".
There are two modes: list and tree. This was implemented rather
elegantly with a general "TreeModel", which can represent trees
of arbitrary depths.
Nevertheless, we have at most two levels and on the second level
only dives can reside. Implementing proper model-semantics
(insert, delete, move) will be quite a challenge and implementing
it under the umbrella of a very general model will not make it
easier.
Therefore, for now, hardcode the model:
At the top-level there are items which may either be a trip
(can contain multiple dives) or a dive (contains exactly one dive).
Thus, we can completely de-virutalize the DiveItem and TripItem
classes, which are now trivial wrappers around dive * and dive_trip *.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo-system now guarantees that pointers to dives are stable
throughout their lifetime. Therefore, replace the unique index by
pointers. This is a small performance improvement, but much more
importantly, it will make it more natural to transport a pointer
to the dive inside QModelIndex's private pointer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For increased maintainability, use the same columns, roles and
the same accessor function for both dive-site models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The LocationInformationModel added two dummy sites to the front
of the list (add new dive site). This was never used - desktop
uses its own model, mobile only extracts the list of dive site
names with a custom function. Remove this functionality.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Editing of dive sites does not work via this model and the function
was broken anyway (it didn't subtract 2 from the index).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If only selected dives were exported into HTML, the statistics would
nevertheless cover all dives. A counter-intuitive behavior. Fix by
adding a selected_only flag to calculate_stats_summary().
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Statistics were calculated into global variables every time the
current dive was changed.
Calculate statistics only when needed and into a structure
provided by the caller.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
process_imported_dives() is more efficient for downloaded than for
imported (from a file) dives, because it checks only the divecomputer
of the first dive.
This condition is checked via the "downloaded" flag of the first
dive. Instead, pass an argument to process_imported_dives().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dives are now in all cases imported via distinct dive_tables.
Therefore the "preexisting" marker is useless. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dives were directly imported into the global dive table and then
merged in process_imported_dives(). Make this interface more flexible,
by passing an independent dive table.
The dive table of the to-be-imported dives will be sorted and merged.
Then each dive is inserted in a one-by-one manner to into the global
dive table.
This actually introduces (at least) two functional changes:
1) If a new dive spans two old dives, it will only be merged to the
first dive. But this seems like a pathological case, which is of
dubious value anyway.
2) Dives unrelated to the import will not be merged. The old code
would happily merge dives that were not even close to the
newly imported dives. A surprising behavior.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This reverts commit 1c4a859c8d,
where the override modifiers were removed owing to the noisy
"inconsistent override modifiers" which is default-on in clang.
This warning was disabled in 77577f717f,
so we can reinstate the overrides.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
process_dives() is used to post-process the dive table after loading
or importing. The first parameter states whether this was after
load or import.
Especially in the light of undo, load and import are fundamentally
different things. Notably, that latter should be undo-able, whereas
the former is not. Therefore, as a first step to make import undo-able,
split the function in two versions and remove the first parameter.
It turns out the the load-version is very light. It only sets the
DC nicknames and sorts the dive-table. There seems to be no reason
to merge dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These also showed up as concerns when creating translation strings.
Adding them thankfully didn't create new strings, but not having them
potentially leads to incorrect runtime behavior.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
DiveTripModel (the model describing the dive-list) was destroyed
and recreated on every reset of the list. This seems excessive.
Instead - in analogy to most other models - make it a single
global object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All callers of FilterModelBase::updateList() sorted the items
(except the last one). Thus we can do the sorting inside the
function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since FilterModelBase now contains complex data (counts and checked),
we might just as well make it a full model and keep track of
the name as well. I.e. do not derive from QStringListModel but from
QAbstractListModel and add the name to the item structure.
Implement proper reset / add / rename semantics. This is overkill at the
moment, as after all any modification the model will be reset, but
ultimately it will allow us to be smarter and only update rows when
needed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Valgrind found use of some uninitialized variable (probably
ds->gf_low_pressure_this_dive ), see #1614. Zero is the correct
value to start with. Lacking a working version of valgrind I cannot
check this actually fixes the problem.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Currently, in FilterModelBase::data() the number of dives is recalculated.
This happens for every mouse-over event!
Calculate the number of dives only on recalculation and store the count
in the items-struct.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the future, we might be smarter about the dive-counts and calculate
them only once and incrementally (if e.g. new dives are added).
Prepare for more complex caching by turning the checked boolean into
a struct, which can then be extended by a count and other things
(e.g. the name).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is another entry in the series to make more things
"const-clean" with the ultimate goal of merge_dive() take
const pointers.
This concerns functions taking pointers to events and
the fallout from making these const.
The somewhat debatable part of this commit might be
that get_next_event() is split in a two distinct
(const and non-const) versions with different names,
since C doesn't allow overloading. The linker should
recognize that these functions are identical and remove
one of them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In a previous commit, the get_gasmix_* functions were changed to
return by value. For consistency, also pass gasmix by value.
Note that on common 64-bit platforms struct gasmix is the size
of a pointer [2 * 32 bit vs. 64 bit] and therefore uses the
same space on the stack. On 32-bit platforms, the stack use
is probably doubled, but in return a dereference is avoided.
Supporting arbitrary gas-mixes (H2, Ar, ...) will be such an
invasive change that going back to pointers is probably the
least of our worries.
This commit is a step in const-ifying input parameters (passing
by value is the ultimate way of signaling that the input parameter
will not be changed [unless there are references to said parameter]).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The filter code was an unholy intermixture of backend and frontend
logic, which made it hard to access it from outside of the UI.
Notably, it expected that Qt would call filterAcceptsRow on all rows.
For trip-view, apparently the filter functions were called twice
(once for filtering the trip, then for filtering the individual dives).
Make the filtering explicit, by calling showDive() for all dives in
MultiFilterSortModel::myInvalidate(), setting the hidden_by_filter
flags accordingly and ultimately invalidating the filter.
The UI code only accesses the hidden_by_filter flag set previously.
The "justCleared" flag can then be removed, since accessing the filter
does not have side effects. Moreover, there is no noticeable performance
gain by returning out early.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove use of SettingsObjectWrapper::
remove include of SettingsObjectWrapper.h
use qPrefFoo:: for setters and getters
replace prefs.foo with qPrefXYZ::foo() where feasible
(this expands to the same code, but gives us more control
over the variable).
Signed-off-by: Jan Iversen <jani@apache.org>
To make dive-filtering accessible from other parts of the code,
break out the actual dive-filtering code into a function that
takes a pointer-to-dive instead of QModelIndex.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Conceptually, the doFilter() functions shouldn't modify the dive
they test. Therefore, make the argument const. To do this, constify
the parameter of get_dive_location(), which likewise seems to be
the right thing to do.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Change the signature from of the virtual doFilter() functions from
bool doFilter(struct dive *d, QModelIndex&, QAbstractItemModel*) const;
to
bool LocationFilterModel::doFilter(struct dive *d) const;
as the QModelIndex and QAbstractItemModel parameters were not used.
This makes this functions independent from Qt's model/view
framework. This is in preparation for making the undo-machinery
compatible with the filtering.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove DivePlanner from SettingsObjectWrapper and reference qPrefDivePlanner
update files using SettingsObjectWrapper/DivePlanner to use qPrefDivePlanner
this activated qPrefDivePlanner and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Commit df156a56c0 replaced "virtual"
by "override" where appropriate. Unfortunately, this had the
unintended consequence of producing numerous clang warnings. If
clang finds a override-modified function in a class definition,
it warns for *all* overriden virtual functions without the override
modifier.
To solve this, go the easy route and remove all overrides. At least
it is consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The keyword "virtual" signalizes that the function is virtual,
i.e. the function of the derived class is called, even if the
call is on the parent class.
It is not necessary to repeat the "virtual" keyword in derived
classes. To highlight derived virtual functions, the keyword
"override" should be used instead. It results in a hard compile-
error, if no function is overridden, thus avoiding subtle bugs.
Replace "virtual" by "override" where appropriate. Moreover,
replace Q_DECL_OVERRIDE by override, since we require reasonably
recent compilers anyway. Likewise, replace /* reimp */ by
"override" for consistency and compiler support.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function DiveListView::fixMessyQtModelBehaviour() was used to
expand the first columns of dive-trips in the dive-list view.
This function was called everytime that the dive-list was modified.
It is kind of ludicrous that external callers would have to
tell the DiveListView, when it has to update its column headers.
Instead, place this functionality in the overriden reset() and
rowsInserted() functions, as these are the only ways that
rows can be added. Change the DiveTripModel to use the proper
beginResetModel()/endResetModel() pair instead of the previous
full deletion and full repopulation using the beginRemoveRows()/
endRemoveRows() and beginInsertRows()/endInsertRows().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the profile, the run-length of the videos is visualized by a bar.
Add the same information to video-thumbnails in the dive-photo-tab.
Though in this case, render it as text on top of the thumbnails.
Fixes#359
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Conceptually, the width of the columns should probably reside in
the view not the model. But much more severly, the old code didn't
work: Columns were set in a DiveTripModel, which was deleted
right away.
Therefore, move the logic back to the DiveListView. Introduce
a QVector<int> of the initial column widths, so that they can be
erased from the setting if unchanged.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Paint a rectangle on top of thumbnails indicating the run-time
of the video.
Use the z=100.0-101.0 range for painting the thumbnails, whereby
the z-value increases uniformly from first to last thumbnail
(sorted by timestamp). The duration-bars are placed at z-values
midway between those of the thumbnails.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Each DiveItem (which is a wrapper around diveId with some virtual
functions), had a member icon_names, which is an array of
four QStrings. These were not used anywhere and must be an obscure
oversight and was probably planned as a static cons array?.
In any case, remove it.
There *was* a function-local analogous icon_names array in
DiveItem::data() though. This array would initialize four
QStrings from C-string literals on every invocation. Make
this array static, local to the translation unit and use
the QStringLiteral macro to construct the QString object at
compile-time.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
9efb56e2d4 introduced rather complex
logic for picture drag'n'drop events onto the profile. Among other
things, the code had to check whether the picture actually belongs
to the displayed dive.
This can be simplified by transporting the dive-id in the drag'n'drop
event structure. The flow goes like this:
DivePictureModel--(1)-->DivePictureWidget--(2)-->ProfileWidget
For (1), we can use the Qt::UserRole role. This was used to transport
the picture-offset, but this is not needed anymore since ProfileWidget
was decoupled from DivePictureModel.
For (2), we simply replace the "position" value, which was never used.
Why would the receiver care which pixel was pressed in the media-tab?
This commit also contains a minor cleanup in DivePictureWidget:
QListView::mousePressEvent(event) was called in both branches of an
if and can therefore be removed from the if. This is so trivial,
that it doesn't warrant its own commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This changes the above mentioned terms everywhere in the UI to
reflect the fact that Subsurface now also supports video files on top
of image files.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Gracefully handle drag & drop to the profile, which changes the
offset of the pictures. To do this, keep the pictures in the
DivePictureModel and the ProfileWidget2 sorted by offset and
re-arrange if needed to keep the list sorted. This needs some
code reshuffling.
Introduce a helper-function that moves ranges in arrays.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As long as ProfileWidget2 and DivePictureModel showed the same set of
pictures and any change would lead to a full recalculation of the set,
it made sense to let ProfileWidget2 use DivePictureModel's data.
Recently, keeping the two lists in sync become more and more of a
burden. Therefore, disconnect ProfileWidget2 and DivePictureModel. This
will lead to some code-duplication and perhaps a temporary drop in
UI-performance, but in the end the code is distinctly simpler and also
more flexible.
Thus, for example the DivePhotoTab could be changed to support headings
without having to touch ProfileWidget2 at all.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Users might have edited their pictures. Therefore, instead of identifying
pictures by the hash of the file-content, use the file path. The match
between original and new filename is graded by a score. Currently, this
is the number of path components that match, starting from the filename.
Camparison is case-insensitive.
After having identified the matching images, write the caches so that they
are saved even if the user doesn't cleanly quit the application.
Since the new code uses significantly less resources, it can be run in a
single background thread. Thus, the multi-threading can be simplified.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This fixes a bug introduced in fbe1144eaf:
For an empty log, in DivePictureModel::updateDivePictures()
beginResetModel() would be called without a corresponding endResetModel().
It is unclear whether this can ever be hit, because in the no-dives
case, at least in the desktop version no profile is shown.
Note, that this makes the check double-unnecessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In DivePictureModel, rowDDEnd and rowDDStart specify the range of
pictures in the profile plot. Obviously, these have to be adjusted
when pictures are deleted.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In order to trigger the redraw of an edited dive we need to make sure
the model realizes that it has been updated. So far the only way to make
sure this happens reliably appears to be to remove the item and
re-insert it. Seems weird, but with this the bug of not redrawing the
profile after an edit appears fixed.
Fixes#1419
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There were a handfull instances of the kind
1) gettextFromC::instance()->tr(...)
2) gettextFromC::instance()->trGettext(...)
1) is pointless, as tr is a static function.
All instances of 2) were likewise pointless, because trGettext()
returns a C-string, which was then immediately converted to a
QString.
Thus, replace both constructs by gettextFromC::tr(...).
After this change there was only one user of gettextFromC::instance()
left, viz. the C-interface funtion trGettext(). Therefore, remove
gettextFromC::instance() and do all the caching / translating
directly in the global trGettext().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
... by taking into acount that dive planner points refer
to the sement before the waypoint (while change mode
events are concerned with the future of a waypoint).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When making a segment non-CCR, its setpoint should be 0.
OTOH, when it becomes CCR, use the default setpoint
(or should we try to find the last previous setpoint?)
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Instead of a constant or a macro for the maximum
number of 'ws_info' elements the 100 literal was used.
Define MAX_WS_INFO in dive.h and use it everywhere.
Also clamp loops that iterate `ws_info' to MAX_WS_INFO.
Prevents potential out-of-bounds reading, similarly to
the previous commit about 'tank_info'.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
In a number of places the global 'tank_info' array
is being iterated based on a 'tank_info[idx].name != NULL'
condition.
This is dangerous because if the user has added a lot of tanks,
such loops can reach 'tank_info[MAX_TANK_INFO]'. This is an
out of bounds read and if the 'name' pointer there happens to be
non-NULL, passing that address to a peace of code that tries
to read it (like strlen()) would either SIGSEGV or have undefined
behavior.
Clamp all loops that iterate 'tank_info' to MAX_TANK_INFO.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Correctly use gettextFromC::instance()->tr(); instead of a simple
tr(); to translate the dive mode names.
This goes on top of 0bc9edf855
and finally makes the whole thing work.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
The list of known dive computers was stored in a multi-map indexed
by the device name. Turn this into a sorted QVector. Thus, no
map-to-list conversion is needed in the device editing dialog,
which distinctly simplifies the code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
helpers.h included qthelper.h and all functions declared in helpers.h
were defined in qthelper.h. Therefore fold the former into the latter,
since the split seems completely arbitrary.
While doing so, change the return-type of get_dc_nichname from
"const QString" to "QString".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On deletion of a single or multiple pictures, the whole DivePictureModel
was repopulated, which was clearly visible in the UI, owing to the
reconstructing of all images in the profile plot.
To avoid this vexing behavior, implement proper deletion routines in
DivePictureModel and ProfileWidget2. Since this needs sensible erase()
semantics the QList<PictureEntry> member of DivePictureModel was
replaced by a QVector. A QVector should be the default anyway, unless
there are very specific reasons to use a QList (which actually is
a deque, not a classical linked list).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function removePicture() had a flag "last", which would indicate
that the called had finished removing pictures. Only then would
the model be recalculated.
This is a strange interface and, matter of fact, the caller was buggy:
if the last picture to be removed didn't have a proper url, removePicture()
was never called with "last" being set.
Change the interface to take a list of pictures to be deleted. This
will allow us to make picture deletion smarter in follow-up commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the old code a combination of removeRows()/insertRows() was used
to signal a model reset.
Replace this by a single, modelReset signal. This saves a call to
plotPictures() and will allow us to be smarter in the future,
when removing pictures.
Reset-model and remove-items are semantically different.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
on iOS it is practically impossible to copy the App log
to e.g. a mail! in iOS 11 the log file is stored within
the subsurface container and you first need to copy (actually
using the clipboard) out from there to the "normal" document
shared space, before it can be used.
At least iOS users (and I believe Android users) are not really
used to work with files, so the process is not easy to document
in an understandable way.
The alternative is to provide a button, which simply puts the
log on the general clipboard, allowing it to be pasted in a
multitud of applications.
Signed-off-by: Jan Iversen <jani@apache.org>
...as the usuage is not anymore about a computer but
a momentary dive mode. Rename the end indicator as well.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Add a divemode column to the planner model and a
corresponding field to struct divepoint and fill it
in the corresponding functions.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In the old code, we used to reload the whole picture list on drag & drop
to the profile. Instead, only update the drag&dropped picture and repaint
the profile-pictures.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The size of the to-be-created thumbnails was passed from DivePictureModel
to Thumbnailer. This became more and more bothersome, because the size
had to be stored with the request. Calling from Thumbnailer into
DivePictureModel was not an option, since this is not linked to all tests.
Therefore, move these functions to the Thumbnailer class.
Since the maximum thumbnail size is now known to the thumbnailer, the
dummy and failure images can be precalculated, which makes switching
between dives faster.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Connect the thumbnailer signal to the dive picture model slot.
This needs some code-reshuffling in the dive picture model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Create a new class, which performs all thumbnailing code.
This is mostly code reshuffling. Thumbnails are extracted
either from a cache or thumbnail calculation is started in
a worker thread.
Since getHashedImage() is called from a worker thread it
makes no sense to call subfunctions in yet another worker
thread. Remove these calls.
In contrast to the previous code, on error the background
thread produces a failure image, but it is not yet shown.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In imagedownloader.cpp the only thing we need from the picture struct
is the filename. Therefore, use QStrings instead of the picture struct.
This simplifies memory management.
Remove the clone_picture() function, which is not needed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
SHashedImage was a subclass of QImage, which fetched the image according
to the filename hashes. Turn this into a function, as this is much more
idiomatic and flexible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code loaded all thumbnails into memory at once. This does
not scale to logs with thousands of pictures. Therefore, save
the pictures to individual files and only load the currently
needed pictures.
Currently, this will make changing switching between dives slower,
because the thumbnails are loaded from disk. In the future, it
is planned to do this in a background thread without blocking
the user interface.
A notable difference to the old code: Thumbnails are now indexed
by the image-hash (i.e. the content of the raw image) and not
by the filename of the image. Thus, different paths to the same
image should only be saved once.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To potentially conserve memory, don't keep copies of scaled thumbnails.
Scale the thumbnails on demand.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
fake_dc() used to return a statically allocated dc with statically
allocated samples. This is of course a questionable practice in
the light of multi-threading / resource ownership. Once these
problems were recognized, the parameter "alloc" was added. If set
to true, the function would still return a statically allocated
dc, but heap-allocated samples, which could then be copied in
a different dc.
All in all an ownership nightmare and a recipie for disaster.
The returned static dc was only used as a pointer to the samples
anyway. There are four callers of fake_dc() and they all have access
to a dc-structure without samples. Therefore, change the semantics
of fake_dc() to fill out the passed in dc. If the caller does
not care about the samples, it can simply reset the sample number
to zero after work.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This commit allows plotting the OC-equivalent pO2 graph for PSCR
dives. This happens in both the cases where there is no external
O2-monitoring AND when there is external pO2 monitoring. The
calculations are only done for PSCR dives and is achieved as
follows:
1) Within plot-info create a pressure-t called OC_pO2 in
profile.h and populate this variable with the open-circuit
pO2 values in profile.c.
2) Create a new partialPressureGasItem ocpo2GasItem in
profilewidget2.h and, in profilewidget2.cpp, initialise it
to read the plot-info OC_pO2 values and enable its
display by using the setVisible method. The
diveplotdatamodel was also touched in order to achieve
this.
3) Create a pref button that controls the display of OC-pO2 for SCR dives
4) Change the colour of the OC-pO2 grpah to orange
5) Change the connection of the crr_OC_pO2 signal to be appropriate
6) rename the OC_pO2 attribute to scr_OC-pO2
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
So far we only wrote messages to subsurface.log on Android (since we couldn't
figure out how to make that file user accessible on iOS). Now that that's
fixed, we also need to actually write to the file in the first place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous taglist_get_tagstring signature/implementation did not allow
handling of cases where inputted buffer could not contain all tags.
New implementation allocates buffer based on pre-computed size allowing to
insert all tags in the returned string.
Added get_taglist_string in qthelper to handle conversion to QString
Added TestTagList with tests for taglist_get_tagstring
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Add DiveItem::displayTags helper method to return Tags as a QString
New Tags column is
by default inserted before "Photos" column
by default disabled
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
To ease trouble-shooting of the picture thumbnailer add a number
of debug- and info-messages.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
strdup(qPrintable(s)) and copy_string(qPrintable(s)) were such common
occurrences that they seem worthy of a short helper-function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace constructs of the kind
s.toUtf8().data(),
s.toUtf8().constData(),
s.toLocal8Bit().data(),
s.toLocal8Bit.constData() or
qUtf8Printable(s)
by
qPrintable(s).
This is concise, consistent and - in principle - more performant than
the .data() versions.
Sadly, owing to a suboptimal implementation, qPrintable(s) currently
is a pessimization compared to s.toUtf8().data(). A fix is scheduled for
new Qt versions: https://codereview.qt-project.org/#/c/221331/
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
