I could have sworn we did this at some point. The vendors are already
sorted, but the products for each vendor should be sorted, too.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After a partial download (because the user hits cancel or because there
was an error, if the user hits Retry the list of dives downloaded so far
should be cleared because we will simply try to re-download the same dives
again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will crash if for some reason current_dive is invalid.
And in general, when displaying information, we want to use the correct dc
in the displayed_dive, not the current_dc, which references the
current_dive...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When changing to a CCR dive, add a setpoint change to the default setpoint
at the beginning of the dive. Otherwise add an explicit setpoint change to 0
.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is bigger and more invasive then I wanted, but it's hard to break it
down into smaller pieces. Here's what it does:
The former "Download" button becomes the "Download", "Cancel download" and
"Retry" button. So this button controls your interaction with the dive
computer.
The other two buttons are now purely "OK" and "Cancel" for the dialog.
"Cancel" discards what happened (much easier now that we download into a
different table), and "OK" adds the dives that were selected in our
selection UI (by default all downloaded dives) to the real dive_table.
And while redoing all this, I also redid some of the state machine
underlying the dialog. The biggest change that the user will see is that
partial downloads (after canceling or after an error) will still offer the
dives that were completely downloaded up to that point in the selection
menu.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We pass a different table to libdivecomputer (and the uemis code) and have
that table filled. And then we simply copy the dives from that table into
the real dive_table when the user accepts the download.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will allow us to download the dives from the dive computer into a
separate table just for that purpose and not into the main dive_table.
I really dislike the code that's in place that dates back to the very
earliest code written for Subsurface. Dumping the dives straight into the
main dive_table seems really stupid to me.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we now track all clicks on the row, having the setData() actually
neutralized the action that we took on the clicked() signal.
Now you can select / deselect a dive, regardless where in the row you
click.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Yet another bug because the indices are inclusive. We need to start off
with the last being smaller than first and we need to adjust the row
count. It might be easier to just fix thing to make last be exclusive...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes the issue where there was no visual feedback when clicking on
the second or third column in the grid. It would actually change the
checked state of the checkmark internally (and you would see the new state
once you clicked on another dive), but it wouldn't give immediate visual
feedback.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The array we allocated was one entry too small.
On the flip side, let's just make sure we cannot call this with a negative
range. That would be bad, too.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Correct minor malfunction with CCR setpoint display. It was showing even
when the po2 display was turned off. This patch ensures that the setpoint
graph only shows when the po2 toolbar button is activated (and in addition
the appropriate checkbox in the Preferences).
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous code suggested a "upgrade" if your firmware where other than
whats parsed from the autofirmware call.
This switches that logic into only suggesting firmware upgrade if the
found firmware is newer than the firmware your device runs.
The previous logic was very annoying if you have a device running a
development version of the firmware. If you have taken that step of the
guided path, you shouldn't be told to "upgrade" to something older
every time you download from your computer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't get location data from the dive computer (at least not from
99.99% of the dive computers today). And we really need to show the data
in a human readable format.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fix the name of a button so the download from dc actually works.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes a crash where we tried to get the data without actually having
downloaded anything.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This tries to relete from the dive list the dives that shouldn't be
imported.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create an on_ok_clicked that will do the actuall parsing of choosen dives.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now, ok should close the dialog, and not download the dives from the DC,
this way the user can choose what happens.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now the user can click on the dives that they want to keep.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Here we list in the model what are our dives, inside the dive_table.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So the user can remove the ones they don't like.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to reparse the file when the known type changes and want to make
sure that we only try to guess the separator and the columns if the user
hasn't told us otherwise.
For the predefined imports this then looks up the correct columns and
places the correct headings there - and then allows the user to modify
them if needed.
This has been lightly tested, there may be dragons.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With the new infrastructure colum numbers are 0 based, so the indices had
to change.
This commit also adds the column names for sample based formats (and ends
up re-indenting parts of that code).
This doesn't make things work, yet, but it's a step in the right
direction.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we automatically matched the columns this might already be correct. So
the standard text is confusing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Resize the components of the divelog import dialog neatly, with the
table view expanding to fill most of the available space.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I used to compare strings, but since there can be more than one empty
column, this was a very sad choice, now I'm comparing indexes.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This drawns a nice rounded rect around the avaliable column names, using
antialiasing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Enable the new delegate on the view, and give the items a bit more
spacing, so we can draw things around them.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This new class is the responsible to draw the columns that can be dragged
from the top bar to the bottom one.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is taking a very simplistic approach. It picks the predominant
potential separator. If there is no clear winner, it uses the UI default
and makes the user pick (and either way, this can always be overwritten by
the user).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commits 0de3bc8452 ("Display CCR setpoint values on the po2 graph") and
65eed80e37 ("Don't always show the setpoint graph") didn't take into
account that current_dive could be NULL and therefore accessing current_dc
could crash.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dialog defaults to tab; if a file is indeed comma separated and one
switches to that, data() could be called on a higher index before the
model is re-populated.
I'm a bit surprised why index.isValid() doesn't catch this, but the manual
check appears to work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt has a very bad habit of getting the inner widget instead of the outer
one.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change the QWidget based approach to the Model based approach, using the
result QStringList for finding if we have the depth or the time of some
specific column.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the drop target will work when implemented.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now we can correctly visualize the file data, and changing
the separator will update on the fly.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This method populates the model with a few lines of the CSV data to help
the user to define what each column is.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will get the first 10 lines of data, try to separate
them using the separator specified, and then try to make
things display correctly on the table.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
