remove PartialPressureGas from SettingsObjectWrapper and reference qPrefPartialPressureGas
update files using SettingsObjectWrapper/PartialPressureGas to use qPrefPartialPressureGas
this activated qPrefPartialPressureGas and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct diveComputer
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
remove Geocoding from SettingsObjectWrapper and reference qPrefFacebook
update files using SettingsObjectWrapper/Geocoding to use qPrefFacebook
this activated qPrefGeocoding and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct preferences
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
remove Language from SettingsObjectWrapper and reference qPrefLanguage
update files using SettingsObjectWrapper/Language to use qPrefLanguage
this activated qPrefLanguage and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct preferences
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
remove LocationService from SettingsObjectWrapper and reference qPrefLocationService
update files using SettingsObjectWrapper/LocationService to use qPrefLocationService
this activated qPrefLocationService and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct prefs
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
remove TechnicalDetails from SettingsObjectWrapper and reference qPrefTechnicalDetails
update files using SettingsObjectWrapper/TechnicalDetails to use qPrefTechnicalDetails
this activated qPrefTechnicalDetails and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct diveComputer
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
remove buehlmann(), setBuehlmann(bool)
buehlmann() is really planner_deco_mode == BUEHLMANN, so no need for a function
setBuehlmann is dangerous, because buehlmann is saved on disk, but not in prefs.* and thus can lead to inconsistency between bool buehlmann and planner_deco_moce.
Signed-off-by: Jan Iversen <jani@apache.org>
Remove individual store to disk for divePlanner in SettingsObjectWrapper
The save was double effect, qPrefDivePlanner::instance()->sync(), which
was preciding already do this.
Signed-off-by: Jan Iversen <jani@apache.org>
If we get launched by an intent, we need to delay processing that Intent
until after the app is initialized. This is the helper function we'll use
for that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This always looked like a thread number and really made no sense since
we had a much more informative debug message just a couple lines above.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And try to guess which one from the device string we get from the Intent.
The function is named to indicate its future use (because once the user
plugs in such a device, we should show the download page).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
remove UpdateManager from SettingsObjectWrapper and reference qPrefUpdateManager
update files using SettingsObjectWrapper/UpdateManager to use qPrefUpdateManager
this activated qPrefUpdateManager and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct diveComputer
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
remove DivePlanner from SettingsObjectWrapper and reference qPrefDivePlanner
update files using SettingsObjectWrapper/DivePlanner to use qPrefDivePlanner
this activated qPrefDivePlanner and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct diveComputer
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
remove Units from SettingsObjectWrapper and reference qPrefUnits
update files using SettingsObjectWrapper/Units to use qPrefUnits
this activated qPrefUnits and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct diveComputer
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
There was a comment reading
/*++GETTEXT: these are three letter months - we allow up to six code bytes*/
but this is not valid (anymore), since the array contains only
untranslated strings, which will be translated on-the-fly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function is not only used at startup and arguably belongs
the the file with the rest of the low-level divelist functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit df156a56c0 replaced "virtual"
by "override" where appropriate. Unfortunately, this had the
unintended consequence of producing numerous clang warnings. If
clang finds a override-modified function in a class definition,
it warns for *all* overriden virtual functions without the override
modifier.
To solve this, go the easy route and remove all overrides. At least
it is consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In metadata.cpp, replace a silly
"if (!memcmp(...) != 0)"
by the intended
"if (!memcmp(...))"
Obviously, both have the same effect. Fixes a warning.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The keyword "virtual" signalizes that the function is virtual,
i.e. the function of the derived class is called, even if the
call is on the parent class.
It is not necessary to repeat the "virtual" keyword in derived
classes. To highlight derived virtual functions, the keyword
"override" should be used instead. It results in a hard compile-
error, if no function is overridden, thus avoiding subtle bugs.
Replace "virtual" by "override" where appropriate. Moreover,
replace Q_DECL_OVERRIDE by override, since we require reasonably
recent compilers anyway. Likewise, replace /* reimp */ by
"override" for consistency and compiler support.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
WindowsTitleUpdate is such a trivial object (a QObject with a single
signal and no own state), that it's not really understandable why
it would need all that "singleton" boiler-plate. Just make it
a default constructed/destructed global object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove Proxy from SettingsObjectWrapper and reference qPrefProxy
update files using SettingsObjectWrapper/Proxy to use qPrefProxy
this activated qPrefProxy and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct prefs
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
When BT_SUPPORT is not enabled, don't default to "true" for using bluetooth for downloading dives.
Otherwise, bluetooth will be forced since the bluetooth button has been removed and is never overridden.
Fixes#1541
Signed-off-by: Kristaps Dzonsons <kristaps@bsd.lv>
Extract thumbnails using ffmpeg.
Behavior is controlled by three new preferences fields:
- extract_video_thumbnails (bool): if true, thumbnails are calculated.
- extract_video_thumbnail_position (int 0..100): position in video
where thumbnail is fetched.
- ffmpeg_executable (string): path of ffmpeg executable.
If ffmpeg refuses to start, extract_video_thumbnails is set to false
to avoid unnecessary churn.
Video thumbnails are marked by an overlay.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove Facebook from SettingsObjectWrapper and reference qPrefFacebook
update files using SettingsObjectWrapper/Facebook to use qPrefFacebook
this activated qPrefFacebook and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct diveComputer
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
remove set_git_url and git_url_changed, because it is not possible
to set git_url, this is done inderectly through set_base_url
Update disk_base_url to generated git_url for both load/sync
Signed-off-by: Jan Iversen <jani@apache.org>
We can argue about any of the changes here, but they are the result of our
whitespace.pl script - so if any of this is offensive to you, part of the
resolution will be fixing the script...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
userid was saved outside all groups, even though it belongs to cloudStorage
Add code to save in new location and read from new/old location
Signed-off-by: Jan Iversen <jani@apache.org>
remove DiveComputer from SettingsObjectWrapper and reference qPrefDiveComputer
update files using SettingsObjectWrapper/DiveComputer to use qPrefDiveComputer
this activated qPrefDiveComputer and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct diveComputer
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
Expand SET_, DISK_ and HANDLE_ macros with field for substructure
Structure prefs contains e.g. prefs.dive_computer.vendor an extra field
are added to the macros to allow this.
Signed-off-by: Jan Iversen <jani@apache.org>
expend LOADSYNC* into DISK_* macros
remove LOADSYNC* from qPrefPrivate.h
update qPrefDisplay to not use LOADSYNC*
Signed-off-by: Jan Iversen <jani@apache.org>
Add static and inline to getter in all qPref header files
Remove call to GET_PREFERENCE_* in qPrefDisplay.cpp
Remove GET_PREFERENCE_* from qPrefPrivate.h
static inline is slightly faster than a function call, but it saves
a lot of coding lines (no lines in qPref*.cpp). Getters are a direct
reference to struct preferences, so they will normally only be used
from QML.
Signed-off-by: Jan Iversen <jani@apache.org>
Add static and inline to getter in all qPref header files
Remove call to GET_PREFERENCE_* in qPrefDisplay.cpp
static inline is slightly faster than a function call, but it saves
a lot of coding lines (no lines in qPref*.cpp). Getters are a direct
reference to struct preferences, so they will normally only be used
from QML.
Signed-off-by: Jan Iversen <jani@apache.org>
Add copy_txt function to qPrefPrivate class
Remove macro COPY_TXT from qPrefPrivate.h
Replace use of COPY_TXT with copy_txt in qPref classes
copy_txt is only once, COPY_TXT was expanded approx. 160 times, so
this commit saves space (and removes a macro).
Signed-off-by: Jan Iversen <jani@apache.org>
Paint a rectangle on top of thumbnails indicating the run-time
of the video.
Use the z=100.0-101.0 range for painting the thumbnails, whereby
the z-value increases uniformly from first to last thumbnail
(sorted by timestamp). The duration-bars are placed at z-values
midway between those of the thumbnails.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Video thumbnails are more complex than simple picture thumbnails.
We store a duration and might want to store multiple images.
Therefore, refactor the thumbnailing in imagedownloader.cpp. Move
the thumbnail-writing down in the call chain to where the thumbnails
are created, since we have more information there (i.e. whether we
could parse the file but not extract an image, etc.).
Split the write-to-cache function into three versions:
- pictures
- videos
- unknown
Define the video-thumbnail on-disk format as
- uint32 MEDIATYPE_VIDEO
- uint32 duration of video in seconds
- uint32 number of pictures
for each picture:
- uint32 offset in msec from begining of video
- QImage frame
Currently, we write 0 pictures. This will be filled in subsequent commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove CloudStorage from SettingsObjectWrapper and reference qPrefCloudStorage
update files using SettingsObjectWrapper/CloudStorage to use qPrefCloudStorage
this activated qPrefCloudStorage and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct preferences
- set function have set_<name> (from struct preferences>)
- signal function have <name>_changed (from struct preferences>)
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way SettingsObjectWrapper
handles it) secures the same storage name is used. Having the set/get/load/sync
functions grouped together makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
There were numerous inlined functions in dive.h. For many of them
inlining is dubious. Let's uninline most of them, with the exception
of trivial accessors and interpolate().
On current master, this gave a size reduction of 5 pages:
-rwxrwxr-x 1 bs bs 5863656 Jul 18 20:57 subsurface-inline
-rwxrwxr-x 1 bs bs 5843176 Jul 18 20:48 subsurface-noinline
-----------------------------------------------------------
20480
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If the last dive of a trip is removed, the trip is deleted.
On redo the dive is added to a non existing trip, leading to a
segfault.
Therefore, keep a copy of the trip to reinstate it on redo.
Note: this cannot work for a sequence of multiple commands.
One would have to rewrite the whole undo-history. Nevertheless,
let's do this as a stop-gap measure.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add qPrefPrivate class which contains one QSettings variable,
delete QSettings from qPref* class definitions
this secures there are only instance of QSettings
(QSettings needs to be in a QObject class to work)
Signed-off-by: Jan Iversen <jani@apache.org>
remove QSettings header file from qPref.h (which is included in many files)
to isolate the use of QSettings in the total system.
Signed-off-by: Jan Iversen <jani@apache.org>
The index-field was misused by the IO routines to mark which dives
had been saved. Somewhat questionable, but let's at least name the
field accordingly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
find_trip_by_idx() and find_matching_trip() weren't used anywhere.
The trip index actually is only misused as a "trip saved"-flag.
trip_has_selected_dives() only existed as a comment.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A number of small cleanups to the color-table:
1) Make the profile_color map of static linkage - it is not
used outside of this file.
2) Remove the third color, which originally was planned for
printing. It was not accessed anywhere.
3) Replace QVector<QColor> by std::array<QColor, 2>. Using a
reference-counted, copy-on-write, dynamic container for static
data seems like overkill. std::array<QColor, 2> has exactly the
same run-time impact as QColor[2], but allows for assignment.
4) Use brace-initialization and remove the unneeded COLOR macro.
5) Remove the fill_profile_color function. Simply use static
initialization.
6) Move #includes from .h to .cpp file.
7) Remove text_render_options(_t), which were not used anywhere.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
dive_getUniqID() is used to create unique dive ids, which are
stable during application lifetime. It was passed a dive, checked
that the id was not set (if it was that it is know to the application)
and set a new id (in contradiction to its name!) if it hadn't any.
There were three callers:
alloc_dive(): called the function on a zeroed dive struct.
fixup_dive(): called the function only if the dive had a 0 id.
MainWindow::setupForAddAndPlan(): called the function on a zeroed dive
struct.
Thus, in all three callers the id is guaranteed to be zero and
the whole keeping-track-of-ids logic is moot. Remove the logic,
don't pass a dive struct to dive_getUniqID() and move the function
to the C-backend.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On top of the file filter for all media files add a file filter
for images only, one for videos only and one for all files.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
DISK_LOADSYNC_INT used double correct to int
DISK_LOADSYNC_INT used double correct to int
Signed-off-by: Jan Iversen <jani@apache.org>Signed-off-by: Jan Iversen <jani@apache.org>
SettingsObjectWrapper contained some delicate font handling mixing font and
font_size, breaking that into 2 parts broke font handling on some platforms
Copy font + font_size handling 1-1 from SettingsObjectWrapper
Signed-off-by: Jan Iversen <jani@apache.org>
Whereas extraction of the dive-duration is trivial, AVIs don't seem
to have a standardized way of saving the creation time. This commit
implements support for two versions randomly found on the internet.
Additional version will follow if need arises. AVI seems not to be
a particular popular format for either vacation or professional
videographers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We want the duration of videos for two reasons:
- To display the duration of the video in the profile plot.
- To be able to determine which dive a video is closer to if the
start is not during a dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Gracefully handle drag & drop to the profile, which changes the
offset of the pictures. To do this, keep the pictures in the
DivePictureModel and the ProfileWidget2 sorted by offset and
re-arrange if needed to keep the list sorted. This needs some
code reshuffling.
Introduce a helper-function that moves ranges in arrays.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Disables the WindowContextHelpButtonHint by default on Qt::Sheet and
Qt::Dialog widgets. This hides the ? button on Windows, which only
makes sense if you use QWhatsThis functionality.
This value has been added in Qt 5.10.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
When I switched over from our own custom IO implementation to the new
upstream custom IO model in libdivecomputer, I completely missed the
fact that the libdivecomputer custom IO model also does a custom _sleep_
function.
I'm not entirely sure what the point was, and it broke things even in
libdivecopmputer itself when some of the new sleep functions were
broken.
Anyway, we didn't export any sleep functions at all for the bluetooth,
BLE and FTDI cases, the the libdivecomputer code didn't fall back to any
sane default sleep implementation either, so the end result was no
sleeping at all.
Which didn't matter for most divecomputers.
But it seems like at least some OSTC dive computers did care, at least
in certain situations, and both Miika and Anton had trouble downloading
with their OSTC Sport dive computers. Using the serial line protocol
and the legacy /dev/rfcomm model worked fine, because then it used the
sleeping functions in the POSIX serial code inside libdivecomputer.
This just adds trivial sleeping functions for the affected download
protocols. Maybe I should have just made libdivecomputer have a sane
default instead, but this wasn't hard either (the hard part was trying
to figure out why the downloads worked for some people and not for
others).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
remove Animations from SettingsObjectWrapper and reference qPrefAnimations
update files using SettingsObjectWrapper/Animations to user qPrefAnimations
this activated qPrefAnimations
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct preferences
- set function have set_<name in struct preferences>
- signal function have <name in struct preferences>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way SettingsObjectWrapper
handles it) secures the same storage name is used. Having the set/get/load/sync
functions grouped together makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
ensure SettingsObjectWrapper load() loads all display variables.
Copy font setting code from SettingsObjectWrapper to qPrefDisplay
Signed-off-by: Jan Iversen <jani@apache.org>
Add qPrefDisplay sync to sync in SettingsObjectWrapper.
If a program part change display variables in struct preferences, they would
not be saved on disk.
Signed-off-by: Jan Iversen <jani@apache.org>
add the prepared class qPrefDisplay to SettingsObjectWrapper and thereby making it active.
As a consequence of the uniform naming standard desktop-widgets/preferences_defaults.cpp and
tests/testpreferences.cpp have been updated.
Signed-off-by: Jan Iversen <jani@apache.org>
add subsurface-helper.cpp to share functions between mobile and desktop
move mobile qml registrations to a shared function (avoiding differences in registrations)
Target is to replace current subsurface-desktop-main + subsurface-desktop-helper and
subsurface-mobile-main + subsurface-mobile-helper with
subsurface-*-main + subsurface-helper
Signed-off-by: Jan Iversen <jani@apache.org>
As per discussion in #1460 there is no point in showing decimal values
for pressures in the equipment tab on desktop or in the dive edit view on
mobile.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
add canonical_version and mobile_version to qPref
Having a property in qPref, allows the use in qml, and prepare the
interface for qml testing.
Signed-off-by: Jan Iversen <jani@apache.org>
add enum to qPref and remove elsewhere
update source core to reference qPref.
the enum cannot be in pref.h because it is to be used in qml and Q_ENUM
need the enum to be defined as part of the class
Signed-off-by: Jan Iversen <jani@apache.org>
Show different images for IO-error and unknow file format.
Use file-extensions to recognize video files if we couldn't
parse them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As long as ProfileWidget2 and DivePictureModel showed the same set of
pictures and any change would lead to a full recalculation of the set,
it made sense to let ProfileWidget2 use DivePictureModel's data.
Recently, keeping the two lists in sync become more and more of a
burden. Therefore, disconnect ProfileWidget2 and DivePictureModel. This
will lead to some code-duplication and perhaps a temporary drop in
UI-performance, but in the end the code is distinctly simpler and also
more flexible.
Thus, for example the DivePhotoTab could be changed to support headings
without having to touch ProfileWidget2 at all.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When generating thumbnails, test for video files. If it is, use
a dummy-thumbnail. Write only the type (video), but no image to
the thumbnail cache, for forward-compatibility.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
subsurface_user_info() only works on Linux (linux.c),
but it doesn't allocate values on the heap.
Solve this ownership problem by always allocating
.name and .email on the heap in subsurface_user_info()
and freeing in the caller.
If subsurface_user_info() did not modify any of the
values from NULL, use default ones, but allocate them
on the heap too.
Ref #1346
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
change qPrefDisplay.cpp to use qPref_private macros, for each variable. The macros
used depend on how standard the variable is handled.
Remark: this commit is production code, but qPrefDisplay is NOT integrated into
SettingsObjectWrapper and thus not active in the live system
Signed-off-by: Jan Iversen <jani@apache.org>
Add macros to handle get/set/loadsync function set functions in qPref
These macros are only convinience functions to write less for all those
variables who are traited standardized.
Signed-off-by: Jan Iversen <jani@apache.org>
Add macros to handle full function set functions in qPref
Remark: the function name is fixed to be "set_<name>" where name is
identical to the variable in struct preferences
This is not our standard naming, but is consistent with struct
preferences (that also use different name schemes).
Signed-off-by: Jan Iversen <jani@apache.org>
Add macros to handle full getter functions
Remark: it is assumed the name of getter function is identical to
the name in struct preferences.
Signed-off-by: Jan Iversen <jani@apache.org>
Use a private QSettings variable, instead of declaring it each time
Add macros to handle full disk* functions
Signed-off-by: Jan Iversen <jani@apache.org>
copy Display from SettingsObjectWrapper to qPref as its own class
file. Update Display to use a common load/sync scheme.
Update set/get functions to follow common name scheme:
- get function have same name as in struct preferences
- set function have set_<name in struct preferences>
- signal function have <name in struct preferences>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way SettingsObjectWrapper
handles it) secures the same storage name is used. Having the set/get/load/sync
functions grouped together makes it easier to get an overview.
REMARK: this commit are made to show the use of the low level LOADSYNC macros, which will
be used for special cases. This class is NOT linked into the live system.
Signed-off-by: Jan Iversen <jani@apache.org>
In commit f3ef38ca0d ("Dive pictures: remove hashes") we removed picture
hashes, but removing them from the git parser causes an ugly red warning when
opening an existing cloud storage repo. With this patch we just silently ignore
the hash.
Fixes#1473
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While we shouldn't have a dive that references a dive site that doesn't exist,
if we do, we shouldn't crash. And a dive site that doesn't exist is most
definitely 'empty'.
Reported-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
commit ec0511e824 ("ios: concentrate build dirs") moved the translations around
without updating the way they are accessed, causing our release 2.1.0 on iOS to
not be localized.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only the first computer is taken into account to find
surface intervals. All further dive computers are split
according to time.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
There were two catch-all classes for translations outside of class
context. gettextFromC was used exclusively from C, but C++ used
both, gettextFromC and QObject. Some of the string were even present
in both. Therefore, unify to gettextFromC throughout the code base.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove cloud_storage_status from qmlprefs.h.
usage to qPref::
enum cloud_storage_status is not used from C, but only from C++, and
having the same structure defined multiple times is a maintenance
challenge.
Signed-off-by: Jan Iversen <jani@apache.org>
add 2 header files and 1 cpp file (qPrefPrivate does not have an implementation)
The rewrite/consoliadation of SettingsObjectWrapper, qmlmanager, qmlpref and planner
needs a place to put common private parts (qPrefPrivate) and 1 common class (qPref).
Signed-off-by: Jan Iversen <jani@apache.org>
sort .c and .cpp files in CMakeLists.txt
The .c and .cpp files in CMakeLists.txt had no obvious sequence,
sorting it at least gives one understandable sequence
Signed-off-by: Jan Iversen <jani@apache.org>
PP_GRAPHS_ENABLED is only used in profilewidget2.cpp
make local to profilewidget.cpp
Signed-off-by: Jan Iversen <jani@apache.org>core/profile: move PP_GRAPHS_ENABLED from pref.h
Move the find-moved-images functions into a new translation unit
and present the user with the identified matches before applying
them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the last commits, the canonical-to-local filename map was made
independent from the image hashes and the location of moved images
was based on filename not hashes. The hashes are now in principle
unused (except for conversion of old-style local filename lookups).
Therefore, remove the hashes in this commit. This makes addition
of images distinctly faster.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Users might have edited their pictures. Therefore, instead of identifying
pictures by the hash of the file-content, use the file path. The match
between original and new filename is graded by a score. Currently, this
is the number of path components that match, starting from the filename.
Camparison is case-insensitive.
After having identified the matching images, write the caches so that they
are saved even if the user doesn't cleanly quit the application.
Since the new code uses significantly less resources, it can be run in a
single background thread. Thus, the multi-threading can be simplified.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The connection canonical filename to local filename was done via
two maps:
1) canonical filename -> hash
2) hash -> local filename
But the local filename was always queried from the canonical filename.
Therefore, directly index the former with the latter.
On startup, convert the old map to the new one.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some OSTC 2 and OSTC Plus variants show 'OSTC+ xxxxx' as BLE name and we
recognized this as OSTC 3 (but that one doesn't support BLE). With this
we recognize these models as OSTC 2 (which is identical from a download
perspective to the OSTC Plus) and both of those support BLE.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we split a dive in two, we keep the dive computer ID for the dive,
but we should update the actual _time_ of the split dive to match the
split.
And when we look for "are these the exact same dives", we should check
not only that the dive computer dive ID matches, but also that the dive
computer time matches, so that we don't consider two parts of a dive
that has been split to be obviously the same dive.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive splitting was completely wrong, because we checked the time of
the previous sample by doing
sample[i - 1].time.seconds
which is entirely wrong. The 'sample' variable is the *current* sample,
so the time of the previous sample is simply
sample[-1].time.seconds
Alternatively, we could have started from the first sample, and done
dc->sample[i - 1].time.seconds
but mixing the two concepts up just gets you a random sample pointer
that is likely not a valid sample at all, and obviously does not have
the right time at all.
As a result, dive splitting was pretty much random. Sometimes it worked
purely by mistake, because the rest of the logic was right (ie we _had_
found the right point where we reached the surface in the dive etc, the
"previous sample time" was simply used to decide if the surface interval
was sufficient to split the dive up).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
move #include prefs-macros from SettingsObjectWrapper.h to SettingsObjectWrapper.cpp
include dive.h directly (only part of prefs-macros.h used) in preference classes
Signed-off-by: Jan Iversen <jani@apache.org>
The SVG icons for failed / still-loading pictures were rendered with an
alpha channel. This lead to strange behavior when hovering over the
icon in the profile plot: When hitting a "hole" the icon would be
minimized again.
Therefore, render the SVGs onto a white background.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Adding Cressi Giotto, Newton and Drake to the list of devices
that can be selected on Android devices.
Signed-off-by: Stephen Goodall <stephen.goodall88@googlemail.com>
This got disabled as unintended (I hope) side effect of commit
807571a588 ("core: update deviceData default from qml").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding Cressi Leonardo to the list of devices that can be selected
on Android devices.
Signed-off-by: Stephen Goodall <stephen.goodall88@googlemail.com>
The old trGettext() was not thread-safe and the returned C-strings
could be freed in the case of empty translations strings. Therefore:
1) Introduce a mutex protecting access to the cache.
2) Never change existing entries, even if the translation string is empty.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were a handfull instances of the kind
1) gettextFromC::instance()->tr(...)
2) gettextFromC::instance()->trGettext(...)
1) is pointless, as tr is a static function.
All instances of 2) were likewise pointless, because trGettext()
returns a C-string, which was then immediately converted to a
QString.
Thus, replace both constructs by gettextFromC::tr(...).
After this change there was only one user of gettextFromC::instance()
left, viz. the C-interface funtion trGettext(). Therefore, remove
gettextFromC::instance() and do all the caching / translating
directly in the global trGettext().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The purpose of the gettextFromC class is twofold:
1) It provides a static storage of C strings if the C part needs
a translation and doesn't want to deal with memory-management.
2) It severs as a catch-all class for translations that do not come
from a proper class (i.e. from helper functions).
The second case was used a few times in qthelper.cpp. By using the
trGettext() function, a cached C-string was obtained. But in every
single instance, this C-string was then back-converted into a QString.
Therefore, use the gettextFromC::tr() function directly, which
returns a QString. Not only is the resulting code simpler - this also
avoids superfluous caching of translation strings.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
... by taking into acount that dive planner points refer
to the sement before the waypoint (while change mode
events are concerned with the future of a waypoint).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Owing to the recent churn in imagedownloader.cpp, some of the
code was bogus.
Notably, in f60343eebb the code
was changed such that always the local filename was used to access
the images. Yet, the old code remained, which after failure tried
again to access the local picture. This second access can obviously
be removed completely.
More seriously, after failing to load the local version, no
attempt was made to fetch the image via canonical filename. This
could produce the following sequence of events:
- Import remote image
- Delete thumbnail and local cache of image
- Image loading would fail
Therefore, first try to load using local file-location. If
that fails, load using the canonical file-location. To do
so, split the file-access code in two functions. The code
should now be distinctly easier to follow.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We filled in the missing information and then printed the wrong string.
This fixes that and also makes the strings slightly easier to understand.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This broke our hook to plumb in our usb open function into libusb, so
this broke ftdi based downloads.
This reverts commit e4530cd5ef.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
This should never happen, since our interface is bassically synchronous,
but it could happen with delayed replies that came in just after we
decided to re-transmit a command.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Our model of waiting for 100ms before re-checking if we got a packet
over BLE resulted in potentially horrendously bad latency for received
packets.
That isn't just a possible performance issue, it actually seems to cause
IO errors with my Suunto EON Core. I'm not entirely sure why, but it
might simply be some timing interaction, particularly since the IO
errors seemed to primarily happen when the dive computer itself was also
busy updating the screen (ie if you pressed buttons on the dive computer
to switch to compass mode, for example).
So replace the silly hardcoded 100ms "waitFor()" function with a
WAITFOR() macro that checks the provided expression every time through
the loop, which gets us a much lower latency (we basically check every
ten milliseconds).
The macro is not beautiful, but it WorksForMe(tm).
This makes a huge difference to the reliability of the download for me,
and might matter for some other dive computers too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
MAX_TANK_INFO is defined in dive.h but is not
used in add_cylinder_description() or when
allocating 'tank_info'.
Use MAX_TANK_INFO instead of the literal 100.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Instead of a constant or a macro for the maximum
number of 'ws_info' elements the 100 literal was used.
Define MAX_WS_INFO in dive.h and use it everywhere.
Also clamp loops that iterate `ws_info' to MAX_WS_INFO.
Prevents potential out-of-bounds reading, similarly to
the previous commit about 'tank_info'.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
In a number of places the global 'tank_info' array
is being iterated based on a 'tank_info[idx].name != NULL'
condition.
This is dangerous because if the user has added a lot of tanks,
such loops can reach 'tank_info[MAX_TANK_INFO]'. This is an
out of bounds read and if the 'name' pointer there happens to be
non-NULL, passing that address to a peace of code that tries
to read it (like strlen()) would either SIGSEGV or have undefined
behavior.
Clamp all loops that iterate 'tank_info' to MAX_TANK_INFO.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The list of known dive computers was stored in a multi-map indexed
by the device name. Turn this into a sorted QVector. Thus, no
map-to-list conversion is needed in the device editing dialog,
which distinctly simplifies the code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove the explicit constructor in DiveComputerNode: Just use
classical C-style struct initialization. Moreover, remove the
empty constructor and destructor of DiveComputerList.
The variable DiveComputerList::dcWorkingMap was unused. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Suunto has updated SampleBlob to use 30 byte blobs. This adds support
for the increased size. Note that this only parses the same fields we
have parsed before. (Currently I have no idea what the increased size is
used for.)
Note also that I do not currently have data with the new format so I
only tested this still works with old data.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
For debug reasons, failure to load the original image was spilled
to the console, even if the local file was then found.
Only print a message, when also the local image failed loading.
This needed a bit of code reshuffling. To know when to print a
failed-loading message, the URL is now checked at the Thumbnailer
level, not the ImageDownloader level. The ImageDownloader is
passed the URL and the original filename (if different). The
image is loaded from the URL, but the signals send the original
filename, so that the thumbnail can be associated to the proper
image.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove Q_OBJECT and qml properties from DCDeviceData class
Remove DCDeviceData register from mobile-helper.cpp
Change DCDeviceData constructor to be without parameters
Signed-off-by: Jan Iversen <jani@apache.org>
Calculate the correct cylinder pressures for rebreather dives with
bailout. Currently the cylinder pressures for a dive are calculated
assuming a single dive mode for that dive. Bailout indroduces more
than one dive mode for a single dive, i.e. transitions from
CCR or PSCR to OC and back. Currently the start and end pressures
for each cylinder are used to interpolate cylinder pressures while that
cylinder is used. However, the different gas consumption rates for
OC, PSCR and CCR are not taken into account in this interpolation
and the cylinder pressure is indicated by an averaged interpolation
accross the rebreather and OC legs of the dive. Consequently the
increased drop in cylinder pressure during OC is not shown. This
PR allows differentiation between CCR/PSCR legs of the dive and
the OC bailout segments, showing realistic interpolation that
indicate the increased rate of gas use during OC.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
When adding a picture to a dive, cache_picture() was called, which
calculated the hash of the picture in a background-thread.
This made tests occasionally fail, because the tests depended on
the filename-to-localfilename being overwritten in a call running
in a different thread. Depending on which thread finished first,
the test succeeded or failed.
The easiest way to circumvent this problem is to remove the cache_picture()
call. The hash will be calculated anyway with the thumbnails. And
the only function of the hash is the "find moved images" function. Which
is not an issue here, because the user just loaded the images from
disk.
Reported-by: Jan Iversen <jani@apache.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code changes to standardise the named of divemodes and to
separate internal divemode names and UI divemode names introduced
a bug that caused non-backward compatability with existing
dive logs. The reason for this is the definition of the
divemode_text strings in dive.c
This change reverses that definition and brings about correct
loading of PSCR dive logs as well as correct parsing of bailout
events involving PSCR.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
helpers.h included qthelper.h and all functions declared in helpers.h
were defined in qthelper.h. Therefore fold the former into the latter,
since the split seems completely arbitrary.
While doing so, change the return-type of get_dc_nichname from
"const QString" to "QString".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Subsurface-mobile has a long startup time; in order to isolate the problem(s) a
timer is added to see where time is "lost".
The collected startup times are added to the clipboard together with the other
logs, allowing test users to report back.
All this is only enabled when compiling with -DENABLE_STARTUP_TIMING
Closes#1340
[Dirk Hohndel: collapsed multiple commits and minor white space cleanups, added
missing QMutex variable]
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we breathe from a cylinder with invalid start or
end pressures, we cannot reliably compute the total gas
use and thus the SAC. So we should not pretend to do so.
A better fix would compute the total SAC for only those
segements that have valid start and end pressures.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The former should be translated but not those that
go to xml/git.
... and fix capitalization of pSCR.
Suggested-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This adds support for DC reported ceiling when importing the Shearwater
Desktop database. Both AI and non-AI versions are tested, but not all
possible paths. For non-AI the DC reported ceiling was from
firstStopDepth and for the AI version it was from the decoCeiling field.
I do not currently know when each of these fields are used, but at least
this works on my test data.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
If a thumbnail and the original picture can be accessed and the
modification date of the thumbnail is before the modification date
of the picture, recalculate the thumbnail.
This causes more disk access and might give strange effects for
picture files with messed up file timestamps (i.e. lying in the
future) or messed up computer clocks (i.e. running in the past).
Therefore, add a preference option to disable the new behavior.
Default is set to enabled.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Even though hashes of image contents are calculated, the hashes are
not compared to actual file contents in routine-operation. Therefore
give the user the option to recalculate thumbnails, should they have
edited the picture.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
the postEvent is only called when downloading from a dc
with bluetooth, so in most it does not have an effect
on the deleteLater() in the code.
there are no reason to do special cleanup while waiting
for bluetooth
QEvent::DeferredDelete is not supported on iOS.
Signed-off-by: Jan Iversen <jani@apache.org>
Since commit 6618c9ebfc, thumbnails
are saved in individual files. The filename was simply the picture-hash.
In a mailing-list discussion it turned out that in the future we might
not hash images or change the hash. Therefore, derive the thumbnail
filename from the image filename, using the SHA1 algorithm.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a #pragma to avoid getting warning when a struct is only initialized
with one 0 and not one pr struct member
Signed-off-by: Jan Iversen <jani@apache.org>
ssrf contains macros/includes etc. used in ssrf, but
not related to dives (mainly in dive.h)
currently the header is created to add the macro UNUSED
later it will be used to remove non-dive related items
from dive.h
Signed-off-by: Jan Iversen <jani@apache.org>
Saving of pictures to git repositories was disabled. Finally remove
this code and the corresponding load code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
PictureEntry was defined as class in imagedownloader.h and
as struct in divepicturemodel.h
A class has a vptr in front, so the difference is real at least
for the clang compiler.
Signed-off-by: Jan Iversen <jani@apache.org>
interpolate, rel_mbar_to_depth, gas_mod and
gas_mnd returns int but uses
a function that returns long, causing clang to
warn about conversion loss due to implicit conversion.
Adding a cast, shows that it is correct.
Signed-off-by: Jan Iversen <jani@apache.org>
lbs_to_grams and to_feet returns int but uses
a function that returns long, causing clang to
warn about conversion loss due to implicit conversion.
Adding a cast, shows that it is correct.
Signed-off-by: Jan Iversen <jani@apache.org>
When creating the ICD-notes the membuffer was not '\0'-terminated,
leading to output of stale data.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is a space character missing in the xml generated by the
present code. Insert a space character.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
If loading of an image failed, we tried to see if we find a
canonical filename in the cache. There's no point in rereading
the picture if the canonical and the original filename are
the same.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The recently committed refactoring of the dive-picture code introduced
a severe bug:
If an image couldn't be loaded from disk owing to an invalid file, the
filename was interpreted as an url and loaded in the background. This
succeeded, because the file actually exists. After download, the file
would then still be invalid and the whole thing restarted, leading to
an infinity loop.
To fix this, do two things:
1) Don't even try to download local files.
2) If interpreting a downloaded file fails, don't try the downloading
business again.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
...as the usuage is not anymore about a computer but
a momentary dive mode. Rename the end indicator as well.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The bailout events in the planner are not saved correctly.
My oversight. This commits corrects the bug
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Ensure that calls to add_segment() all have a appropriate divemode
for that part of the dive plan. In the case of plan(), the existing
variable 'divemode' was directly passed to add_segment. For the
functions interpolate_transition() and trial_ascent(), the divemode
was obtained by including it in the parameter list of the function
and divemode supplied by the calling function.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Add a divemode column to the planner model and a
corresponding field to struct divepoint and fill it
in the corresponding functions.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Under some conditions get_current_divemode() (in dive.c) returns an
erroneous divemode. This happens when there are several events at
the very beginning of the dive, as can happen in some CCR dive logs.
This commit fixes that bug.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Replaced a rather cumbersome function that that did the above. Upon
the suggestion of Robert Helling who proposed a much shorter way,
this new function replaced the previous ones. This necessitated
changes to divelist.c, profile.c and plannernotes.c, as well as
dive.c/h.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Replaced a rather cumbersome function that that did the above. Upon
the suggestion of Robert Helling who proposed a much shorter way,
this new function replaced the previous ones. This necessitated
changes to divelist.c, profile.c and plannernotes.c, as well as
dive.c/h.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
This provides for reading of divemode change events from dive logs
and for writing them to dive logs. This applies to xml and git
divelogs. Divemode change events have the following structure:
event->name = "modechange"
event->value = integer corresponding to enum dive_comp_type (dive.c),
reflecting the type of divemode change (OC, CCR, PSCR, etc).
In the dive log file, the event value is written as a string that
corresponds to each of the enum values, e.g.
<event name='modechange' divemode='OC' />
This xml is also read from the dive log file and translated to an
appropriate value of event->value.
The file diveeventitem.cpp was udated to reflect this new way of
dealing with divemode change events.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Function peek_next_divemodechange() is redundant if get_next_divemodechange()
has one additional parameter. Calls to get_next_divemodechange() were
updated in divelist.c, plannernotes.c and profile.c.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
I removed the special event type that has been used for bailout events.
Bailout events are now just bookmarks with a specific name "e.g. OC,
CCR, PSCR). This removes a case where a segmentation error occurred
when trying to remove a bailout event from the dive profile.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
This is the second step for implementing bailout. The indirect
calls to fill_pressures through add_segment() (in deco.c) are
addressed. Bailout is now fully implemented in the dive log but
not in the dive planner.
1) The parameters to add_segment() are changed to take a
divemode as the second last parameter, and not a *dive.
2) Call to add_segment() in profile.c and in divelist.c are
adapted. In divelist.c some calls to add_segment were left
using dc-> divemode instead of possible bailout. This appears
tp be the most appropriate route.
3) The functions get_divemode_from_time() and get_next_divemodechange()
in dive.c have had some small changes.
4) The calls to get_segment(0 in planner.c were changed to reflect
the new parameter list, but not updated to reflect bailout. This
is the next step.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
This is a first step to interpret bailout events.
1) The event structures have a new attribute: divemode.
Currently interpreted dive modes are OC, CCR, PSCR.
2) When doing fill_pressures(), the calculation is aware
of divemode. When divemode is OC (==bailout), then
the appropriate calculations of gas pressures are done.
3) Two new functions get_next_divemodechange() and
get_divemode_at_time() are created to find divemode
changes in the events linked list and to determine
the dive mode at any point during the dive.
4) fill_pressures gets a small amendment to facilitate
the correct calculations, depending on divemode.
The cases where fill_pressures() is used *outside the planner*
are changed. The result is that, for dives with bailout, the
correct gas pressures are shown on the dive profile. The
deco for bailout dives is not yet correct. This is the
next step.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
This is only used by one caller and there doesn't appear to be a reason
to inline it in the first place.
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of generating one ImageDownloader object per image to be
downloaded and running every image download in a separate worker
thread, use one global ImageDownloader object owned by the UI thread.
The images are downloaded using event based IO (as probably was the
intention of the QNetworkManager class).
User-visible change: after download from the internet, the thumbnail
is shown without having to change dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Import a camera icon from the KDE breeze theme, which is licensed
under the LGPL. Use this icon to display not-yet-loaded images
in the photos tab and the profile.
Source: https://github.com/KDE/breeze-icons
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The size of the to-be-created thumbnails was passed from DivePictureModel
to Thumbnailer. This became more and more bothersome, because the size
had to be stored with the request. Calling from Thumbnailer into
DivePictureModel was not an option, since this is not linked to all tests.
Therefore, move these functions to the Thumbnailer class.
Since the maximum thumbnail size is now known to the thumbnailer, the
dummy and failure images can be precalculated, which makes switching
between dives faster.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Create a new class, which performs all thumbnailing code.
This is mostly code reshuffling. Thumbnails are extracted
either from a cache or thumbnail calculation is started in
a worker thread.
Since getHashedImage() is called from a worker thread it
makes no sense to call subfunctions in yet another worker
thread. Remove these calls.
In contrast to the previous code, on error the background
thread produces a failure image, but it is not yet shown.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In imagedownloader.cpp the only thing we need from the picture struct
is the filename. Therefore, use QStrings instead of the picture struct.
This simplifies memory management.
Remove the clone_picture() function, which is not needed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
SHashedImage was a subclass of QImage, which fetched the image according
to the filename hashes. Turn this into a function, as this is much more
idiomatic and flexible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On startup, convert an old-style thumbnailHash to individual
thumbnail files. Show a modal progress bar while doing so.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code loaded all thumbnails into memory at once. This does
not scale to logs with thousands of pictures. Therefore, save
the pictures to individual files and only load the currently
needed pictures.
Currently, this will make changing switching between dives slower,
because the thumbnails are loaded from disk. In the future, it
is planned to do this in a background thread without blocking
the user interface.
A notable difference to the old code: Thumbnails are now indexed
by the image-hash (i.e. the content of the raw image) and not
by the filename of the image. Thus, different paths to the same
image should only be saved once.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Detection isn't required, but it makes things easier. For the Mares dive
computers we only see the Bluelink, so we can't tell which dive computer is
connected to it. We guess "Quad", but the user can pick a different one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When generating fake profiles for manually entered dives, fake_dc() and
plan() used different final ascent rates of 5 m/min and 4.5 m/min,
respectively. This led to dives that were 6 seconds longer than entered
by the user and to confusion. See #554.
Therefore, use the same ascent rate taken from the preferences field
flag.ascratelast6m in both cases.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
1) The connection for the display of CCR-setpoint o2SetpointGasItem
was erroneous, being connected to partialpressuregasSettings. It
is now correctly connected to technicalDetailsSettings.
2) The colour of the setpoint graph is changed from PO2_ALERT (red) to
an orange colour in order to show setpoint in red only when it
exceeds 1.6. This emphasises the visibility of red parts of the
gas pressure graphs whenever gas limits are exceeed.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
By not filling out this value, entering of manual dives was broken
for dive lengths starting with a digit 5 or higher.
Fixes#1211
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
fake_dc() used to return a statically allocated dc with statically
allocated samples. This is of course a questionable practice in
the light of multi-threading / resource ownership. Once these
problems were recognized, the parameter "alloc" was added. If set
to true, the function would still return a statically allocated
dc, but heap-allocated samples, which could then be copied in
a different dc.
All in all an ownership nightmare and a recipie for disaster.
The returned static dc was only used as a pointer to the samples
anyway. There are four callers of fake_dc() and they all have access
to a dc-structure without samples. Therefore, change the semantics
of fake_dc() to fill out the passed in dc. If the caller does
not care about the samples, it can simply reset the sample number
to zero after work.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function looks for the last gas change before a
given time. We should initialize it with a gaschange
event as we might later use this event to read a
gasmix from it.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This commit allows plotting the OC-equivalent pO2 graph for PSCR
dives. This happens in both the cases where there is no external
O2-monitoring AND when there is external pO2 monitoring. The
calculations are only done for PSCR dives and is achieved as
follows:
1) Within plot-info create a pressure-t called OC_pO2 in
profile.h and populate this variable with the open-circuit
pO2 values in profile.c.
2) Create a new partialPressureGasItem ocpo2GasItem in
profilewidget2.h and, in profilewidget2.cpp, initialise it
to read the plot-info OC_pO2 values and enable its
display by using the setVisible method. The
diveplotdatamodel was also touched in order to achieve
this.
3) Create a pref button that controls the display of OC-pO2 for SCR dives
4) Change the colour of the OC-pO2 grpah to orange
5) Change the connection of the crr_OC_pO2 signal to be appropriate
6) rename the OC_pO2 attribute to scr_OC-pO2
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
The previous code would not add the non-LE address for dual stack
devices. Unfortunately, even with this fix we still don't get the
correct result for the dual stack Shearwater Petrel 2 that I have
for testing as Android incorrectly reports it as a BLE-only device.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only filter against the hard coded list if no other supported transports
are available for a dive computer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For example, even on platforms that support libusb, libdivecomputer
might be compiled without such support.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user specified bluetooth, we really should pick bluetooth, not
probe and possibly fall back to something else.
We should also honor the users choice of BLE vs classic BT.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In firmware version 2.97 the setting 0x38, SETPOINT FALLBACK, has bin
obsoleted and we get a error when trying to write to it.
This removes this setting.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
On Android we still need to do more filtering as only some of the USB
divecomputers are supported. But on iOS this takes care of it without
the hard coded list.
Additionally, if built without BT or BLE support, the corresponding dive
computers are no longer shown (e.g. Perdix AI on Windows).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This opportunistically uses a cache of 'fingerprints' for already
downloaded dives.
As we download data from a dive computer, we save the fingerprint and
dive ID of the most recent dive in a per-divecopmputer fingerprint cache
file.
The next time we download from that dive computer, we will load the
cache file for that dive computer if it exists, verify that we still
have the dive that is referenced in that cachefile, and if so use the
fingerprint to let libdivecomputer potentially stop downloading dives
early.
This doesn't much matter for most dive computers, but some (like the
Scubapro G2) are not able to download one dive at a time, and need the
fingerprint to avoid doing a full dump. That is particularly noticeable
over bluetooth, where a full dump can be very slow.
NOTE! The fingerprint cache is a separate entity from the dive log
itself. Unlike the dive log, it doesn't synchronize over the cloud, so
if you download using different clients (say, your phone and your
laptop), the fingerprint cache entries are per device.
So you may still end up downloading dives you already have, because the
fingerprint code basically only works to avoid duplicate downloads on
the same installation.
Also, note that we only have a cache of one single entry per dive
computer and downloader, so if you download dives and then don't save
the end result, the fingerprint will now point to a dive that you don't
actually have in your dive list. As a result, next time you download,
the fingerprint won't match any existing dive, and we'll resort to the
old non-optimized behavior.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This creates a new libdivecomputer_device_open() helper, and makes
downloading and configuration use it to open the dive computer device
using the proper protocol.
The IRDA case was tested by Sébastien Dugué - I had initially left it
undone believing that "nobody uses IRDA".
Reported-and-tested-by: Sébastien Dugué <sebastien.dugue.subsurface@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This converts our old custom IO model to the new model that
libdivecomputer introduced. This is partly based on Jef's rough patch
to make things build, with further work by me.
The FTDI code is temporarily disabled here, because it will need to be
integrated with the new way of opening devices.
The ble_serial code goes away entirely, since now libdivecomputer knows
about BLE transport natively, and doesn't need to have any serial
wrapper around it.
Signed-off-by: Jef Driesen <jef@libdivecomputer.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove a semicolon after Q_OBJECT and a few others after the closing
braces of while loops.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This should have been caught by our build check, but it turns out that
that one isn't correctly reflected in its Travis status.
Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Up until now we just reused the macos.c file for convenience, hard coding a
specific file path that may or may not work on iOS. Instead get the preferred
path from Qt and for this we need to be able to call into Qt, so this needs to
be a C++ file.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Technically, these aren't BLE, these are just the three devices that
are supported by the Mares Bluelink Pro Bluetooth download dongle.
While we are at it, admit that this code is no longer automatically
created but instead maintained by hand.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Identify segements that fullfill the folllowing criteria for
the leading compartment:
He is off-gasing while N2 is on-gasing
Overall there is on-gasing
Add a line to the info box for those segments
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The planner notes were constructed using a sequence of
len += snprintf(buf, buflen - len, ...);
calls. This will fail once len > buflen, because the second parameter
of snprintf is unsigned. Note that snprintf returns the number of
bytes that would have been written if it weren't truncated.
Fix this by using membuffer with put_format()/put_string() and
asprintf_loc().
Fixes#1155.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
get_dive_date_c_string() and get_current_date() return copied strings.
Make this explicit by returning non-const pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move duplicate code, which reads '*' arguments from va_list into
parse_fmt_int() function. To pass pointers-to-va_list, the va_list
has to be copied first.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
qthelper.cpp is already quite voluminous. Move the recently
introduced localized versions of (v)snprintf() and put_format()
into their own translation unit.
Moreover, adopt C-style semantics for asprintf_loc(). This function
will be used to remove fixed-size buffers in core/plannernotes.c.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Previous taglist_get_tagstring signature/implementation did not allow
handling of cases where inputted buffer could not contain all tags.
New implementation allocates buffer based on pre-computed size allowing to
insert all tags in the returned string.
Added get_taglist_string in qthelper to handle conversion to QString
Added TestTagList with tests for taglist_get_tagstring
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Same as default branch, but as 0x01 appears to be converted from DM4 to
DM5, let's just be explicit about it.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Currently the best guess of sampleBlob format. Unfortunately there seems
to be some version of DM that stores the temperature in different
location that I have not been able to figure out yet. Note that some
version of DM does not utilize sampleBlob but specific blobs for each
value (temperature, pressure, ...).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Parse MP4s and related video files and extract the creation timestamp
from the "mdhd" (media header) atom.
Introduce helper function templates to extract arbitrary-length
unsigned integers in big-endian format from file or memory.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Thus, metadata has to be only read once and the picture_load_exif_data()
function can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To ease trouble-shooting of the picture thumbnailer add a number
of debug- and info-messages.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Correct a bug in finding the minimum heartrate.
Use the minimum and maximum heartrate value to set min/max and
tic distance for the heartrate axis in the profile.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
This is a preparation for supporting videos. Some video formats may
not possess such meta data, or we may not yet be able to parse them.
In such a case, use the file creation date.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a preparation for video support. We don't want to read a whole
potentially multi-GB file into memory just to detect that it isn't a
JPEG. Especially since at the moment EXIF metadata are parsed twice,
once for GPS, once for timestamp.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
strdup(qPrintable(s)) and copy_string(qPrintable(s)) were such common
occurrences that they seem worthy of a short helper-function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace constructs of the kind
s.toUtf8().data(),
s.toUtf8().constData(),
s.toLocal8Bit().data(),
s.toLocal8Bit.constData() or
qUtf8Printable(s)
by
qPrintable(s).
This is concise, consistent and - in principle - more performant than
the .data() versions.
Sadly, owing to a suboptimal implementation, qPrintable(s) currently
is a pessimization compared to s.toUtf8().data(). A fix is scheduled for
new Qt versions: https://codereview.qt-project.org/#/c/221331/
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make arguments to set_informational_units(), set_git_prefs(),
set_userid(), dive_remove_picture() and update_event_name()
"const char *" for consistency with the rest of core/dive.c.
This will allow replacing toUtf8().data() with the constData()
version in a subsequent commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was only done explicitly for Windows. Other platforms were
implicitly supposed to be UTF-8.
Suggested-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
So because I merged with upstream libdivecomputer, and it no longer does
the "halfduplex emulation" thing in the IO layer, and instead does it in
the only Suunto backend that needed it, that also affected our custom IO
layer in subsurface.
Sure, I could have left a dummy interface and left subsurface with some
ugly dead code, but it's really better to just get rid of the code.
So when Dirk pulls in the libdivecomputer updates from
https://github.com/torvalds/libdc-for-dirk.git Subsurface-branch
this patch to remove the halfduplex code in subsurface is also needed.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
PSCR dives with o2 sensors are more like CCR dives. The math is exactly
the same, its just a different diluent and a different po2.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
This introduces a fixup function that walks all the samples and
populates the no_o2sensors if its zero and supposed to be something
else.
There is a bug somewhere which Willem hit, causing this to never be set.
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Anton Lundin <glance@acc.umu.se>
In the if case above, we already conclude its a OC dive, but its cleaner
to actually pass the current mode instead of a hard coded value.
This also makes the code less prune to future bugs.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
The map widget on the mobile version requires that
a dive object from a model has a dive_site uuid.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Consistently do not use a space between value and unit.
Consistently do not use a space between "name:" and value.
Add "/min" for SAC rate.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
The hash field in the picture-structure was in principle non-operational.
It was set on loading, but never actually changed. The authoritative
hash comes from the filename->hash map.
Therefore, make this explicit by removing the hash field from the
picture structure.
Instead of filling the picture structure on loading, add the
hash directly to the filename->hash map. This is done in the
register_hash() function, which does not overwrite old entries.
I.e. the local hash has priority over the save-file. This
policy might be refined in the future.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Passing of QStrings and QByteArrays was inconsistent in qthelper.cpp.
Unify to passing const-references. Passing by value is no big deal, since
QString and QByteArray do copy-on-write "optimization". Nevertheless, let's
keep it as consistent and effective as possible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
learnHash() was always called in conjunction with add_hash(). The
pattern was that a local filename and a hash were connected in
the hash-to-filename and the filename-to-hash maps. Then, the
original picture-filename or url were registered in the filename-to-hash
map.
This commit changes learnHash() to take three parameters (original-filename,
local-filename and hash) and do all of the above. The new code is
simpler because no dummy picture struct has to be generated in
DiveListView::loadImageFromURL().
The tests were extended to check for all hash<->filename associations.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
learnHash() is called either on a local picture structure
[DiveListView::loadImageFromURL()] or on a cloned picture structure
[ImageDownloader::saveImage()]. In neither case the picture structure
is passed to the frontend. Therefore, storing the new hash in the
picture struct is not necessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
hashPicture() calls hashFile(), which calls add_hash(). add_hash()
updates the filename-to-hash and hash-to-filename maps. Therefore,
there is no point in calling learnHash() in hashPicture(), which
updates the filename-to-hash map.
Note that learnHash() updates the picture-struct with the new hash,
but since hashPicture() works on a cloned picture-struct, which
is free()d in hashPicture(), these changes are lost anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
updateHash() and hashPicture() did the same thing, with the exception
that hashPicture() marked the dive list as changed if a hash changed.
This seems like a good idea in any case, therefore always use
hashPicture().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If loading from hash failed in the saveImage() slot(!) it would
recurse into loadFromUrl(), which would generate a new network
reply. Very scary and a (small) wonder that it worked.
Let's try to make this all more explicit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The QNetworkAccessManager is only used in the load() function. No
point in it being a subobject.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
1) Destroying the QNetworkManager seems like a bug: this was a
subobject of ImageDonwloader. It's mysterious how this didn't
crash.
2) Instead of calling deleteLater() on the reply object, simply
delete it after completion.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A cloned picture struct would not be freed if the filename was already
in the queued-for-download set.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This changes the numeric format of many values printed to the UI to
reflect the correct numeric format of the selected locale:
- dot or comma as decimal separator
- comma or dot as thousands separator
In the Qt domain the `L` flag is used case specific mostly
in qthelper.cpp.
Then the helper functions get_xxx_string() are used more consistently.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Replace snprintf() and put_format() by snprintf_loc() and
put_format_loc(), respectively to localize formatting of
integers and floats.
Acked-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace snprintf() and put_format() by snprintf_loc() and
put_format_loc(), respectively to localize formatting of
integers and floats.
Acked-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This commit introduces functions:
- QString asprintf_loc(const char *cformat, ...);
- int snprintf_loc(char *dst, size_t size, const char *cformat, ...);
- put_format_loc(struct membuffer *, const char *fmt, ...);
and their va_arg equivalents, which use Qt's QString::arg() formatting
options to render the strings.
The snprintf_loc() function takes care not to truncate multi-byte
UTF-8 encodings. Thus, on overflow, the resulting string might be
shorter than size-1.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a combo box for water types with defaults for fresh water, sea water
and the EN 13319. All values taken from units.h, where EN 13319 was added
beforehand.
Custom values can be entered through a spinbox.
Also changed "Salinity" in TapDiveInformation.ui to "Water type".
Translation required!
Signed-off-by: Oliver Schwaneberg <oliver.schwaneberg@gmail.com>
Change the strategy when to allow cylinder removal from a dive:
- Not remove when cylinder has gas switch events, in any other cases
allow removal
- Remove this whole "cylinder with same gas" thing being a criteria
for cylinder removal
When removing a cylinder which has corresponding pressure info in
samples, also remove this pressure info from the samples.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Since all qt-helpers are defined in qthelper.cpp, there seems to be
no reason to have two include files. By unifying the two files,
duplication and inconsistencies are removed. The C++-only part is
simply compiled away with #ifdefs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Each callsite of saveBtDeviceInfo() has a QString, which is converted
to a C-string, passed and immediately converted back. Remove these
conversions by taking a reference to QString directly.
getBtDeviceInfo() is not as clear. Here, the callsite has a C-string
handed down from libdivecomputer. Nevertheless, pass a reference of
QString here as well. Firstly, for reasons of symmetry. Secondly,
to avoid multiple conversions in the getBtDeviceInfo() functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Use struct temperature_t for temperatures in struct stats_t and
use get_temperature_string() when printing these temperatures for
statistics and HTML export.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Replace an early "return" in add_plan_to_notes() with a "goto finished;"
This was the initial idea of doing it plus it fixes a potential memory
leak (missing free for icdbuffer).
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Mostly replace "return (expression);" by "return expression;" and one
case of "function((parameter))" by "function(parameter)".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This unifies behavior of XML & git saving. Now, in both cases, the
picture hash is extracted from the filename-to-hash map instead of
using the picture structure.
This seems more robust, because the picture structure is not necessarily
updated by learnHash(). The latter may operate on a copy of the picture
structure.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The following statement in the hashstring() function:
return hashOf[QString(filename)].toHex().data();
returns data of the temporary QByteArray generated by toHex().
Thus, the caller will access released memory, which could lead to
data corruption.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
With DECO_CALC_DEBUG != 0, divelist.c and profile.c have calls
to dump_tissues() without passing a 'struct deco_state' argument.
Fixes#1105
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The images to load are kept in a set to avoid multiple loading of
the same picture. The set was protected with a mutex.
Problem: the mutex was not released before loading the picture,
effectively serializing the loading of pictures.
Therefore unlock the mutex once the set is updated.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In core/imagedownloader.cpp the helpers cloudImageUrl() and loadPicture()
are made of static linkage.
The global variables queuedPictures and pictureQueueMutex were moved
into the loadPicture() function, because they are used only there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This change deals with issue #554.
If you enter a dive duration manually, the cell renderer cuts the seconds
away when the changes are saved. I added the helper "render_seconds_to_string"
as a counterpart to "parseDurationToSeconds". The helper keeps the seconds,
if not null. The rendering of the cell is done at two places in the code,
so I think it is cleaner to add a dedicated method for it.
Signed-off-by: Oliver Schwaneberg <oliver.schwaneberg@gmail.com>
Reduce the impact and visibility of icd calculations by writing
the data to the planner output only in cases where gas switches
involve:
1) ascent
2) helium is used as part of breathing gas
3) gas switch results in an increase in partial pressure of nitrogen.
Coding change:
1) The code for writing the header of the icd table as well as
the inclusion of the data in the planner output is made
conditional on the above three requirements. This involves
moving the code that writes the table header into the
function that writes an icd data item to buffer.
2) Manipulation of a boolean variable that controls writing
of the table header to buffer and that also determines
whether any icd results should be inluded in the planner
results.
3) Reorganise comments so that there are not multiple tabs between
the code and the start of a comment.
Correct type and insert braces where important
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
See also e6e1473e6. The construction of the locationlist
was not the same as the 3 previous lists, and it needs
the inclusion of a new model file (divelocationmodel.cpp)
in the mobile app. In addition, as the mobile app is mainly
interested in a simple stringList (model) to populate a HintsText
field (or maybe later a combobox), this stringlist is added
to the model, to easy interfacing with QML.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See e6e1473e6. Exact same commit but here for the
list of divemaster. The careful reader will spot a
small addition to the clearDetailsEdit() QML function.
Two more field are cleared.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is the first of a set of commits that are (very) similar.
It appeared that a number of more or less static lists, which are
constructed by a loop over all dives in the logbook, were executed
when changing focus to a next dive. For example, the in this
commit addressed list of used dive suits.
What was wrong was that the suitList was linked to a dive. There
is only a need to construct the list of used suits when data is
changed (and obviously, once on startup of the app). Further, it
appeared that a lot of code was duplicated and that we can use
(in this case) the same code from the desktop completionmodels.cpp.
Basically, this commit involves the following changes:
- include completionmodels.cpp in mobile and desktop (so move
it from the desktop only category to the generic category).
- remove double code from DiveObjectHelper.cpp
- Do not differentiate in the init phase and the normal refresh
of the list
- the per dive logic is now only the getting of a previously
constructed list (in init or update of the divelist).
There are no visible changes in the UI, other than a better
performance when scrolling over dive details.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
- Variable max_deleted_seen had no effect and is removed.
- Results of read/write operations are evaluated to assert success
and to prevent compiler warnings.
Signed-off-by: Oliver Schwaneberg <oliver.schwaneberg@gmail.com>
Remove the global error buffer and pass the error string directly
to the frontend. The frontend is then responsible for accumulating
errors.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When performing a factory reset to an uemis, the object_ids within the divelog
will not be reset. Nevertheless, the dive numbers are reset to 1.
So, the first log will have a positive offset n to the first dive number.
The uemis-downloader used the object_id from the logs as a start point for
getDive, if dives were already synced before. This causes the sync to stall.
I prevent this by subtracting the lowest object_id from the requested before
using it as dive number.
Signed-off-by: Oliver Schwaneberg <oliver.schwaneberg@gmail.com>
uemis-downloader downloads the dive spot for each dive, even if the same
location was already downloaded before within the ongoing synchronization run.
I modified the function "get_uemis_divespot" to remember all requested
divespot_ids and their mapping to uuids.
New helper functions:
- static void erase_divespot_mapping()
- static void add_to_divespot_mapping(int divespot_id,
uint32_t dive_site_uuid)
- static bool is_divespot_mappable(int divespot_id)
- static uint32_t get_dive_site_uuid_by_divespot_id(int divespot_id)
The memory leak is removed through the call of erade_divespot_mapping().
Signed-off-by: Oliver Schwaneberg <oliver.schwaneberg@gmail.com>
Otherwise, with large gradient factors, one can have infinite NDL
which result in an infinite loop when no gas is set.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The gas fractions (in %) are now printed at a resolution of 0.1%
and not at 0.01% as previously.
The string in the info box that provides icd data is reformatted
so that the info-box is as narrow as possible.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Refuse to add a ConnectionList row, when the row is already
there. This, obviously, prevents double items.
Fixes: #1069
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
as otherwise there are warning on the descent.
The ICD line in the info box is generated for all
gas switches with decreasing He content.
Also change the presentation in the info box to align it
with the notes.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In the planner notes format the HTML for different sections with
div tags.
Put the table title for the ICD table outside the table because then the
alignment looks a little bit nicer.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Avoid the need for a char array for the "old_gas_name" by passing
two pointers to the gasmixes to the add_icd_entry function and
calling helper function gasname() there twice.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
If a gaschange happens at the beginning of a segment, currently the
wrong runtime (end of segment time) is printed in the ICD table.
This is corrected here.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Move the above function from plannernotes.c to dive.c so that
it is available to be called from the dive log part of the
software, and not only from the planner. The following was done:
1) Edit the comment above the code to make it more accurate
2) Move the structure icd_data to dive.h
3) Create an external reference in dive.h for the above function
4) Copy the body of isobaric_counterdiffusion() to dive.c
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
This patch implements the calculation and printing of icd parameters
in the dive planner output. It does:
1) icd parameters are calculated following the rule-of-fifths for
OC trimix dives. For each gas change on the ascent that involves
helium, the change in gas composition as well as the change in
partial pressures are shown. If rule-of-fifths is exceeded, a
warning message is prinetd.
2) An independent function is provided that in principle enables
calculation of icd paramaters outside of the context of the
dive planner.
Further updates to icd calculations
These changes respond to #1047. Code style conventions have been
improved. The ICD table is now also printed when the planner is
set to verbatim mode. The code that created the html icd results
has been moved to a function. This does not make the code more
efficient (many parameters passed) but it makes the code more clean.
Free a new dynamic variable (old_gas_name)
Stylistic changes to new code in plannernotes.c
Changes in comments to explain some of the changes I made.
Preparation of comments and functioning of isobaric_counterdiffusion()
and its dependent data structure for possible transfer to dive.c
and dive.h after finalisation and merging of the present PR.
Smaller stylistic changes to conform to our coding rules.
The several comments and suggestions during github review
(@atdotde, @leolit123, @sfuchs79) are incorporated.
Fixed up mis-aligned comments and text descriptions by replacing
tab characters with space characters, thereby hard-forcing
alignment of indented lines of text.
Remove parameter *dive from function isobaric_counterdiffusion().
Improve a few constructs to conform to our style rules.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
This patch allows the planner to save the last manually-entered
dive planner point of a dive plan. When the plan has been saved
and re-opened for edit, the time of the last-entered dive planner
point is used to ensure that dive planning continues from the same
point in the profile as was when the original dive plan was saved.
Mechanism:
1) In dive.h, create a new dc attribute dc->last_manual_time
with data type of duration_t.
2) In diveplanner.c, ensure that the last manually-entered
dive planner point is saved in dc->last_manual_time.
3) In save-xml.c, create a new XML attribute for the <divecomputer>
element, named last-manual-time. For dive plans, the element would
now look like:
<divecomputer model='planned dive' last-manual-time='31:17 min'>
4) In parse-xml.c, insert code that recognises the last-manual-time
XML attribute, reads the time value and assigns this time to
dc->last_manual_time.
5) In diveplannermodel.cpp, method DiveplannerPointModel::loadfromdive,
insert code that sets the appropriate boolean value to dp->entered
by comparing newtime (i.e. time of dp) with dc->last_manual_time.
6) Diveplannermodel.cpp also accepts profile data from normal dives in
the dive log, whether hand-entered or loaded from dive computer. It
looks like the reduction of dive points for dives with >100 points
continues to work ok.
The result is that when a dive plan is saved with manually entered
points up to e.g. 10 minutes into the dive, it can be re-opened for edit
in the dive planner and the planner re-creates the plan with manually
entered points up to 10 minutes. The rest of the points are "soft"
points, shaped by the deco calculations of the planner.
Improvements: Improve code for profile display in dive planner
This responds to #1052.
Change load-git.c and save-git.c so that the last-manual-time is
also saved in the git-format dive log.
Several stylistic changes in text for consistent C source code.
Improvement of dive planner profile display:
Do some simplification of my alterations to diveplannermodel.cpp
Two small style changes in planner.c and diveplannermodel.cpp
as requested ny @neolit123
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
The username was extracted from https:// urls but not from ssh://
urls. Unify this by extracting the username from any remote url.
This is done with regard to unifying the file handling in the
frontend.
For this approach to work, the credential callback of the ssh://
transport had to be adapted. It now also supports username/password
in addition to private-key authentication.
Currently, the only way the user can use the username/password
authentication is by deleting a potential public key.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On saving to a remote git repository, the transport was set to https://,
which broke saving to ssh:// repositories. Instead determine the
transport from the remote url.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a change mainly for developers working on both mobile and
desktop application. As the current setup is that all preferences
are stored in one file (Subsurface.conf), for both mobile and desktop,
the unwary developer might get confused that the things tested on
mobile-on-desktop are not working on mobile-on-device. As we share
a lot of code between the desktop and the mobile code, also
our fairly extensive set of preferences play a significant role
in the inner workings of our applications.
So, this commit introduces an own preferences file for mobile
(on desktop) resulting in the preferences between the plain
desktop apllication now invisible to the mobile-on-desktop
application and vise versa. Making the mobile-on-desktop a
much more realistic test plaform for mobile development.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
get_matching_dive does not check if the DC wrote an acknowledgement for the requested dive.
As result, the sync stalls if dive number 0 is not available.
Signed-off-by: Oliver Schwaneberg <oliver.schwaneberg@gmail.com>
Since this helper-function exists, we might just use it. A subtle
reuse of a buffer (string of second use was known to be shorter than
string of first use) was replaced by a separate allocation.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The libgit2 functions git_cred_ssh_key_new() and git_cred_userpass_plaintext_new()
copy their arguments. Therefore, free the string arguments or don't
copy them in the first place.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The last 2 commits have now been squashed.
S Fuchs's comment on line 315 has been fixed
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
In core/file.c move ++lineptr out of the while condition
!empty_string(lineptr) && (lineptr = strchr(lineptr, '\n') && ++lineptr
since it always evaluates to true.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There are ca. 50 constructs of the kind
same_string(s, "")
to test for empty or null strings. Replace them by the new helper
function empty_string().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
No reason to mess around with a 5 byte buffer when we have a
proper buffer available to receive a possibly 8 byte output
based on the format string. And silences compiler warning.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is the only case where C-code sets the current file.
Remove this call for a better separation of C-backend and
C++-frontend parts.
There were four callers of clear_dive_file_data(). Two of them
would call set_filename() anyway. For the remaining two add an
explicit call to set_filename().
This commit fixes a bug introduced in commit b3901aa8f9:
The cloud-online menu entry was still enabled after "closing" the
cloud storage.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In case syncing with the online repository failed, enter offline mode.
This reflects the message sent to the user ("working with local copy").
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make functions in core/file.c, core/parse.c and core/import-csv.c
that were not used outside their translation unit of static linkage.
parse_date is moved from core/file.c to core/import-csv.c, since it
is used only there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The used parse_dl7_new_line function already prints an error / debug
message so these are unnecessary.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
We should get either dive trailer or dive profile immediately after
header. Thus make sure that is the case.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
This is first step towards parsing "empty" dives properly. I.e. now the
updated test dive parses properly.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
The preferences flag cloud_background_sync used to be used heavily in
the mobile code, but is not used there anymore. Now, it is accessed
only in one place, but does not do what it actually says: If it is off,
the remote storage is not synced on save (but will be synced on next
load).
Syncing on save can also be prevented by unchecking the "Cloud online"
menu checkbox. Since the latter seems more logical and general
(support for non-cloud remote git repositories), remove the cloud_background_sync
option.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Sync with remote git repository, even if this isn't the cloud storage.
There seems to be no point in remote git repositories if they aren't
synced.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
downloadTable was declared twice in "dive.h". Remove one occurence.
Moreover, "uemis-downloader.c" also declared downloadTable. This can
likewise be removed, because "uemis-downloader.c" indirectly includes
"dive.h".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A simple one line change that solves (for me) numerous hard crashes
when adding geo tags by reverse lookup from the dive site edit
screen. This is one of those crashes that is might not be
reproducible on any platform, or even between different builds
on one platform.
This said, I found that the free() on line 99 of divesitehelpers.cpp
tried to free pointers to random data, ie. not pointing to valid
taxonomy category strings. And those pointers where simply caused by
freeing the string earlier, and leaving the pointer around. So, this
change is nothing more than setting the just freed pointer to NULL,
to allow free() to be called later safely.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
In libdivecomputer.c, name_buffer is formatted with calls like
snprintf(name_buffer, 9, "%d cuft", rounded_size);
This works fine in the regular case, but it generates compiler
warnings, since theoretically the integer might produce up to
11 digits, leading to a truncation of the string.
Increasing the size of name_buffer to 17 chars silences these
warnings. This may seem like pointless warning-silencing.
Nevertheless, in the case of invalid data, it might make debugging
easier since, in the above case, the "cuft" is never truncated.
In total, it seems that this is a benign change with potential,
though in a very unlikely case, positive effects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The object cur_setting was defined in core/pref.h. Instead, declare
it as extern and define it in core/parse.c. This silences a compiler
warning, since inclusion of core/pref.h would define the object, which
was then left unused in tests/testparse.cpp.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The boolean "autogroup" was parsed as an integer. In principle OK, but
let's make the type more explicit by introducing a get_bool() function.
Suggested-by: "Lubomir I. Ivanov" <neolit123@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All users of autogroup are clearly expecting a boolean value, so
let the type reflect this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All callers of mark_divelist_changed() were passing a bool. Therefore,
let mark_divelist_changed() take a bool and make dive_list_changed a bool.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The return produces a warning about "strict-aliasing rules".
Use a union to fit the hash and the uint32_t into the same
block of memory, which obeys the GCC strict-aliasing rules.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Owing to bug #1002 invalid bluetooth device addresses of the form
"devicename (deviceaddress)" or "deviceaddress (devicename)" may
have found their way into the preferences. Recognize such names
and extract the correct address.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This fixes a bug where if the user entered very high ascent (or less commonly
descent) rates such that the time to ascend (or descend) from one level to the
next was less than 10s, that leg would be skipped in the dive plan notes.
Reported-by: Alexander Maier <maieralex@me.com>
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
clear_vpmb_state() was declared with incorrect signature, and all
functios in this change are extern, so declare them as such.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Realistically this is a false positive as we should never use a second
BTDiscovery instance - but there's nothing wrong with being extra certain.
Coverity CID 208319
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous attempt to fix this in commit 652e382e68 ("Cleanup: avoid a
few memory leaks") was clearly bogus. Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we cannot store tanks / gases past MAX_CYLINDERS (currently 20),
there is no point in analyzing those data.
Coverity CID 208339
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A very very trival fix, for a mysterious issue. When loading
GPS fix data from the server, the string date was parsed with
the format "yyy-M-d". And no, the "yyy" is no typo here, but
was the reason that data from the read from server got a
1/1/1970 data. And when a user decided to upload that data
to the server again, we ended up with 2 copies of the
GPS fix. One with correct data (as originally saved), and
one new with the bogus date.
In order to het rid of those weird 1/1/1970 GPS fixes, users
will have to remove them by hand.
Fixes: #567
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
For deep dives with long deco, the sum of deco stops could
overflow. This is prevent by turning it into long.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
There was a curious pattern of singletons being implemented based on
QScopedPointer<>s. This is an unnecessary level of indirection:
The lifetime of the smart pointer is the same as that of the
pointed-to object. Therefore, replace these pointers by the respective
objects.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The two final newlines in the help message were removed in commit
0c74f7a2c8.
Re-add them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To access a QMap<> entry, the value() function is used with a sentinel
as default value. If the sentinel is returned, the code assumes that
the searched for entry doesn't exist.
Make this code more idiomatic by using an iterator and testing for
end().
This fixes a compiler warning, because only one of the elements of
the sentinel was initialized, but the remaining elements were
copied. Harmless, because the code would exit early if it found
the sentinel. Still not nice.
While redoing this function, the entry-not-found message was improved
(adding of function name, space between massage and timestamp) and
elevated from debug to warning level.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
plot_info->nr should always be > 0. If this is not the case, write a
message to stderr instead of crashing in add_plot_pressure(). This
silences an use-of-uninitialized-variable warning.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
last_ceiling was used before initialization in the first iteration
of the loop in calculate_deco_information().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the corresponding error message appears thrice, it is translated
once at the beginning of the function (even in the non-error case).
A single-byte fread() was transformed into getc().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A small redo of 78bafe8f62. The quotes cause the original
functionality not to work. Ignore them as well.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Unfortunately, in my commit 48d9c8eb6e, I fixed only half of
the problems related to the functionality introduced by Stefan in
commit 46004c39e2. The lonely m (that was fixed) caused
a parsing error, but forgotten where the single quotes around
the depth value. These quotes simply causes the new functionality
not to work. Again, the fix is simple: do not erroneously save
quotes. And as the new functionality is pretty obscure
(replanning a non-planned dive, and manually entering a gas switch
depth), another bug that could go unnoticed for years.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
In hindsight a very simple bug to fix, but it requires some
knowledge on the inner workings of our git storage. The changes
on merge of dive sites were simply not saved (completely) because
the git storage code has a cache that we need to invalidate
selectively (ie. for the dive we just gave a new dive site uuid)
to get things finally embedded in the overall commit.
The main reason this bug went unnoticed for more than 2 years is
that most people use the XML/SSRF format (where this problem is
non exsistent), and dive site merging is probably not a very
much used feature either.
Fixes: #939
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
A bogus key/value pair was introduced in the cylinder,
consisting of a lonely "m" without value. This is caused
by commit 46004c39e2 and fixed in 48d9c8eb6e. See referenced
commits for more info.
Just ignore this key/value pair. No processing is broken
due to this, as the git storage stores only metric SI type data.
In fact, the m unit is superfluous anyway.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
In a session with the profile I saw that the planner spends
a lot of time waiting to obtain the lock for the factor cache.
Most of the time we are only reading that cache and that
is save to do in parallel (according to the Qt IRC channel).
So we can use a QReadWriteLock instead of a QMutex. This
appears to be quite a performance boost, in particular
for VPM-B
Signed-off-by: Robert C. Helling <helling@atdotde.de>
I never realized that my hashes weren't written, because it only
outputs a debug instead of a warning message.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit 46004c39e2 introduces a new field in the logbook outputs
(depth of a cylinder). While in XML the depth unit is stored with a space
between value and unit (m), in our git storage, the unit m is without
space. As the git storage parser uses a space to separate individual
key/value pairs, the erroneously saved space results in parsing warnings
when opening the logbook.
The unwanted space is normally saved just after download of a new dive
from the dive computers, so all desktop-git-storage uses are affected,
and more worrying, mobile beta users.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Internal floating point (FP) calculations should be performed using double
unless there is a very good reason. This avoids headaches with conversions.
Indeed, the vast majority of FP calculations were already done using double.
This patch adapts most remaining calculations. Not converted where things
that were based on binary representations and variables which weren't used
anyway.
An analysis of all instances follows:
core/plannernotes.c, l.404:
This was a comparison between two floats. On the left side, first an integer
was cast to float then multiplied with and integer and divided by a constant
double. The right hand side was an integer cast to a float. Simply divide by
1000.0 first to convert to double and continue with calculations. On the right
hand side, remove the cast, because the integer will be implicitely cast to
double for comparison. This conversion actually emits less instructions,
because no conversion to double and back is performed.
core/planner.c, l.613:
Same analysis as previous case.
subsurface-desktop-main.cpp, l.155:
A local variable representing the version OpenGL version. Turn this into
integer logic. Not only does this avoid dreaded FP rounding issues, it also
works correctly for minor version > 10 (not that such a thing is to be
expected anytime soon).
abstractpreferenceswidget.[h/cpp]:
A widget where the position is described as a float. Turn into double.
desktop-widgets/divelogexportdialog.cpp, l.313:
total_weight is described as float. Use double arithmetics instead. This
instance fixes a truncation warning emitted by gcc.
The function isCloudUrl() was only called in one place, parse_file().
But, isCloudUrl() could only return true if the filename was of the
git-repository kind (url[branch]). In such a case, control flow would
never reach the point where isCloudUrl() is called, since
is_git_repository() returns non-NULL and the function returns early.
Therefore, remove this function. Moreover, adapt the affected if-statement
by replacing "str && !strcmp(str, ...)" with the more concise
"same_string(str, ...)".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
See 2182167b53. Keep the dupicated code in sync.
Originally-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
See commit 6f42ab46da. Unfortunately, this code is duplicated
(and an obvious candidate for code cleanup). So replicate the mentioned
commit here. In fact, the mentioned issue #666 talkes about the mobile
app, and the fix was only done for the desktop.
Originally-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
In libdivecomputer, a new divemode is added (DC_DIVEMODE_SCR) useful
for dive computers that have specfic functionality for semi-closed
rebreathers. At this moment, only the HW computers seem to provide
this.
This commit takes care of proper recognition of this new divemode
when importing data from a dive computer.
Tested on an actual import from an OSTC3 that contained
dives in this new mode.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is just code cleanup. Jef renamed the CCR divemode constant
in libdivecomputer, but added a define to be backward compatible as
as well (so this rename did not break our Subsurface build).
Obviously, this breaks the build for people that build against an older
libdivecomputer, but I see no reason to do that.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This gets us the first merge with the upstream iostream implementation.
This requires a small change for serial_ftdi.c to build.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
copy_string() does the same as the current code, but in one instead
of four lines. Strictly speaking, it does not exactly the same thing
because the empty string ("") case is handled differently. copy_string()
returns NULL instead of a copy of "", which is probably preferred anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Current values (1000m, 10 min) may be too long to choose an accurate fix
while automatically applying gpsfixes to dives. They are fine if we are
diving from a static position, but will give wrong positions e.g. while
drift diving.
Reducing the default values to shorter 100m, 5min won't hurt most dives
from shore or static boats, but will make other diving styles get more
accurate gpsfixes.
signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the credential functions return GIT_EUSER, a call to git_remote_fetch
fails, but giterr_last() may return NULL. This led to a crash in
verbose mode.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The list iteration in dive_remove_picture() was buggy and would
crash if handled a picture that is not in the list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In this function, a repository is created, but the returned object
is not used. Might just as well free it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On iOS save all discovered devices. Later qt_ble_open queries this
list in order to actually connect to the remove device.
The Desktop code stores this data with the list items and only saves
when the "Save" button is clicked. This is not supported with the
current ConnectionListModel implementation.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
Currently, in is_remote_git_repository(), git URLs of the form
"file://..." are recognized as local and the "file://" prefix is
removed. The shortened URL is then processed as if it was a remote
URL, which of course has to fail. So far so good - this is not
a remote repository after all. But the removal of the prefix is
not propagated to the calling is_git_repository() function and
handling as a local git repository therefore fails likewise.
To fix this issue, move removal of the "file://" prefix one level
up to the is_git_repository() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Calculating variations when in recreational mode doesn't make sense, and can
prevent variations from being calculated when switching back to Buhlmann or
VPM-B modes.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
This reenables the computation of plan variations but now in a separate
thread. Once finieshed, a signal is sent to update the notes.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
before we run out of memory. Diving deep with air and small GFhigh
can cause those (try GF 30/70 at 75m with 25+min bottom time)
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Change the merging behavior for the following information:
Divemaster, buddy, suit:
From "(a) or (b)" to "a, b"
Notes:
From "(a) or (b)" to "a\n--\nb"
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
This should help us to move parsing that is not XML related to other
files, hopefully making the code cleaner.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Store cylinder.depth in XML files and in git storage.
This info is in fact the gas switch depth of a specific gas/cylinder
in the planner.
This change avoids the need of typing in a user specific depth value
again when replanning an existing planned dive.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Pass the planner state struct to the profile computation so it can use
deco_time and first ceiling to display VPM-B ceiling.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
For UI responsiveness, we need to be able to run the planner in the background. This needs the
planner state to be localized (and we need to pass a pointer around).
In order to not let too many lines overrun (and to save typing in the future)
I have renamed instances of struct deco_state to ds. Yes this should have gone
to a separate commit but I accidentally commit --amend'ed it.
Computing of planner variations is temporarily disabled.
Unlock the planner when returning early
So we don't deadlock in add dive and recreational mode (which
use the planner without actually planning).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Add the capability to select the location name from a list, constructed
from the known dive sites in the logbook.
Fixes: #546
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Each preferences object owns its string members. In three cases, pointers
were copied instead of strings, leading to (in the best case) dangling
pointers if the user edited values:
1) In the GET_TXT macro in core/prefs-macros.h
2) In the PreferencesDialog::defaultsRequested() method
3) In main() of the mobile version
This patch fixes these issues, by using copy_string() or copy_prefs()
as appropriate.
The only reason that the old code didn't crash regularly is that the
default_prefs object was only used at startup and defaultsRequested()
is (at the moment?) dead code.
This patch also aligns the backslashes in core/pref.h and fixes a typo.
The declaration of copy_prefs() is moved to the core/prefs.h header.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently not mandatory in our code because we never include
prefs.h from a C file today but for the future this could avoid confusion.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Bool is the correct choice for this option.
int was used before because it was not clear to me how and if I can use
bool in this C file.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
In the old implementation there were two static C-style strings, filename
and path, which were initialized to NULL and filled on first call of
the function (i.e. singletons).
There is no sense in having two static variables indicating whether
this function was called previously. Moreover, there is no point
in remembering filename accross function calls, because it is not
used once path is set to a non-NULL value.
Therefore, make the filename variable non-static and calculate it only on
first invocation (as indicated by a NULL path). Moreover, free() the filename
variable after its use to fix a memory leak of the old code.
The windows code is slightly different in that the temporary filename is
not dynamically allocated.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This tries to remove subtle ownership issues. When copying preferences
structures, the default filename is copied. But the default preferences
struct simply takes a pointer to a global string which is free()d in main().
Now, this is not strictly a bug because the free()ing of preferences
resources is not implemented. Yet, let's try to make this consistent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Boolean settings were declared in pref.h randomly as bools and shorts.
Since the code relied anyway on bool being well-defined and identical
on the C- and C++-sides, turn all of them into bools. They use less
space and express intent more clearly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In general, the C++-side of the preferences code consistently uses
the bool data type for boolean settings. There are five exceptions,
which use short instead:
showPo2
showPn2
showPhe
saveUserIdLocal
displayInvalidDives
This patch attempts to make the code more consistent by turning
these into bools as well.
Tests showed that writing as short and reading as bool is handled
gracefully by the Qt variant code. Therefore, an upgrade should not
cause user-visible changes to their settings.
As a bonus, two extern declarations of the set_save_userid_local()
function, which is not defined anywhere, were removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make all char * pointers in pref.h const to make it clear that these
strings are not mutable. This meant adding a number of (void *) casts
in calls to free(). Apart from being the right thing to do, this commit
makes the code more consistent, as many of the strings in pref.h were
already const.
While touching core/qthelper.cpp turn three instances of (void*) into
(void *).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit d6c013f303 introduced a cast to avoid a signed/unsigned
comparison warning for all translation units that included
core/dive.h.
Commit 1f8506ce64 then changed the definition of duration_t from
unsigned to signed, inverting the effect of d6c013f303.
Thus, revert d6c013f303 to allow compilation with -Wall without
flooding.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Free a bunch of C-style strings before assigning newly copied strings.
One case was particularly buggy:
prefs.locale.use_system_language = copy_string(qPrintable(value));
Note that prefs.locale.use_system_language is a bool, which of course
always evaluates to true! Probably nobody noticed because a restart
is required when changing locale.
Moreover remove a few double-semicolons.
Stefan Fuchs points out that sometimes you get cylinder duplication when
you merge dives, particularly with a planned dive. For example, if we
had different manual pressures in the two different dives, the cylinders
will be kept separate.
But that also means that we don't want to plot the pressures from those
other cylinders that came from another dive and are now associated with
another dive computer.
Change the "seen" logic for the cylinder to ignore cylinders that are
only mentioned by other dive computers than the active one.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's already used in core/gaspressures.c where it was declared
privately, and we'll have a new user in the profile code, so just
declare it in a proper header file like it should have been.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The "prev" cylinder can never be negative since commit 56c206d19f
("For more manual gas pressure details"), so remove stale code that
checks for a case that cannot happen any more.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some BT devices support both, classical and LE, modes. Users could
choose either by prepending or removing "LE:" in the device address
field. After commit d23bd46a1b, the
device field is always disabled in Bluetooth mode.
Therefore, add a mode combo box to the Bluetooth device selection
dialog. In the default mode (auto), the old code path (based on
the Qt device flags) is used. The two other modes (force LE, force
classical) allow the user to force the preferred behavior.
This feature is meant as a stop-gap measure until a more refined
transport choice is implemented. Therefore, the value of the new
combo box is not saved in the settings, to avoid cluttering of
the preferences with soon to be obsolete entries.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The Windows auto-verbose + log file creation if starting
from a non-terminal has the problem that the print_version()
call is never made becase 'verbose' is updated programatically
in windows.c and not by the user (by passing -v).
To work around the issue:
- move the windows console creation call before *everything* else
- then immediatelly install the message handler
- then see if 'verbose' is set and explicitly call print_version()
print_version() now also has a flag (version_printed), to avoid
printing the version multiple times, if the user decided to add
an extra -v to the Desktop shortcut.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
If the user has not started Subsurface from a terminal
make sure that verbosity is enabled (verbose = 1), so that
the log files are populated with information useful for
debugging.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
When filling samples with values during DC import fill sticky values
like CNS, NDL, stoptime,... immediately into current sample.
Otherwise we will not fill the sticky values into the last sample
created.
Add two new sticky values: heartbeat and bearing
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Fixup the NDL value to '-1' at the very beginning of a dive.
Some dive computer report a NDL of 0 at the very beginning of a dive
and then only some 10 seconds later they report the correct value
like 240 min for the first time.
Translate this 0 at the beginning of a dive into our internal '-1'
for no info available.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Type duration_t changed from uint to int.
Default value of '-1' introduced for some of the values in struct sample:
NDL used -1 as default.
Bearing uses -1 as default (no bearing set).
Display pXX, EAD, END, density, MOD only if values are larger than 0.
In profile don't display data from two first and two last plot_data
entries in info box.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Currently, on Linux, after selecting a Bluetooth device the name of the
device is shown. On reopening the download dialog, on the other hand,
the address is shown. In the device selection dialog both are shown.
This patch changes the download dialog such that both, name and address,
are shown. The bulk of the patch introduces the name of the device in
the preferences and DCDeviceData. It has to be noted that DCDeviceData
is an encapsulation of the libdivecomputer device_data_t. Nevertheless,
the new Bluetooth-name field is, at the moment, not passed through to
libdivecomputer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On BLE connection timeout a weird error-message was shown, because
the controller was still in connecting state and no error string was
set. Therefore, handle the timeout case with a special case label.
Moreover, remove three unnecessary calls to disconnectFromDevice(),
which is called in the destructor of the controller anyway (verified
by looking at Qt source).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit 9771255919 introduces a compiler warning due to mismatched
pointer types. Fixed here.
Reported-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
I'm sure this bug has heen here forever, but the CNS clock is
not very relevant for most divers, and even some technical divers
do not care about this value.
However, doing long decompression dives, the value can easily
grow over 100%, and a lot further. For example, the OSTC computers
use 2 bytes to store the CNS value in the profile data, and I
have multiple dives in my logbook going way over 255%.
This all said. Just store the CNS value in an unsigned 16 bit.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Commit d15779a calculates final stop based on stoplevels[2], but if final stop
is 6m/20ft, we should use stoplevels[3]. This fixes it.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Some messed up logic was producing negative deco_time values for some no-deco dives. The CVA wouldn't converge and unrealistic VPMB ceilings were displayed in the profile. This fixes it.
See #762
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
We calculate tts every 30s, not every sample. Consider that when determining
the time that the ceiling would have cleared if it's after the surfacing time.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
This makes the calculations in profile.c a little simpler, especially now we
adopt consistent final ascent rate to determine deco_time since d15779a27
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
If we consider the actual time to ascend from the final stop when calculating
deco_time, then slowing the final ascent can lead to the final stop being
extended, which is completely nonsensical. For consistency with the original
VPMB implementation, we can't ignore the final ascent time completely, but if
we assume it is always the same (take default ascent rate of 9m/min) then
slower the final ascent won't lead to a longer final stop.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
As it is not possible to delete dive sites from the logbook, we
need to make sure that we never save sites that are not tied to
any dive. With this change, unused site that are currently in
the logbook will also be removed, so it will also clear up
(wrong) historical data.
Supposed to fix#786
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
A change of the font_size in preferences ended up in the wrong
preferences group (the GeneralSettings group), appearing to the
user as a non-saved preference. Fix is simple. Just set the
the correct group before saving a change in font_size.
Fixes: #780
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Recognize Aladin as the Bluetooth name of the Scubapro Aladin Sport
Matrix. Note that the Scubapro Aladin H Matrix most likely also
identifies itself using this BT name. But it probably uses the same
BT protocol (i.e. the G2 protocol) and therefore this should not pose
a problem. Ultimately a common name should be found.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Remove unused variables o2time and breaktime or convert into boolean.
Never consider minimum gas switch time when switching to o2.
Reflect this behavior also in the UI.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
QMap::operator[] creates a new default constructed entry in the map
if no entry with the given key exists. While not problematic (since
typically nullptrs are inserted) this is usually not what you want
for read access.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently one has to explicitly use --win32console and/or
--win32log to enable a dedicated console (a console window
that opens next to the Subsurface window) or to enable file
logging on Win32.
This patch makes the following changes:
- removes the --win32* command line arguments
- removes the dedicated console window support
- if the app starts from a shortcut and not from a console, always
redirect stderr and stdout to _err & _out log files
- if the app starts from a console redirect stderr and stdout to that
console
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
1) Destroy QLowEnergyService objects in destructor of BLEObject.
2) Let BLE object take ownership of the controller so that the
latter can be destroyed in the destructor of the former. This
introduces a certain ownership subtlety, which could be solved by
allocating the controller object in the BLE object. But let's
first do the less intrusive thing.
3) Destroy the BLE object for two error conditions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When planning a VPM-B dive, the "deco time" ends at surfacing, which is after
ascending after a full-minute deco stop is complete, after ceiling clears. We
should take this into account when calculating the ceiling outside of the
planner.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
This corrects the issue where the displayed ceiling in the profile was
"broken" by the planner, especially for shorter and shallower dives.
Also fixes issue outside of planner where the deepest VPM-B ceiling was shown
too early, messing up the deco_time calculation.
VPM-B plans respond to change in O2% in gas as expected (in my testing)
Fixes: #630
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
If we consumed 0l/0bar in total from a cylinder there is no need to also
state that we consumed 0l/0bar during ascend.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Because now we are trying to open a URL as if it was a local file.
Again, the goal is to accelerated debugging if things go wrong.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is rather fragile code, and the capitalization of the error message
in libgit2 changed at some point. But commit 794739b4c0 ("strstr is a
case sensitive compare") didn't really fix the problem - as it broke
that same check for older libgit2 versions.
Instead use our new helper function to make it work with libgit2 old and
new.
Also, add some more error output so the next time we run into this it's
more obvious what broke and where.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That's not a standard functions, so let's just build it. This is not
the most efficient way to write it, but it will do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This string is substituted with the runtime increments derived of slight
variations in depth or bottom time in:
diveplannermodel.cpp:1058:
displayed_dive.notes = strdup(notes.replace("VARIATIONS", QString(buf)).toUtf8().data());
Translating it avoids substitution and we just get the translated
string.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Fixes minor interface inconsistency: After a failed download, the
error message was also shown on subsequent successful downloads.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Otherwise the following call to do_git_save will potentially have incorrect information
about the cache validity of the dives in the divelist.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
