Since we now have a selection.c translation unit, put the selection-
related functions there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We mark hidden/shown dives in the core but store the number
of shown dives in the MultiFilterSortModel. Move this datum
to the core for improved locality.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It makes no sense to have a non-NULL current_dive once all dives
have been deleted. Therefore, clear current_dive implicitly in
clear_dive_file_data() and don't depend on the caller performing
this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We should call this function with two well defined dive_or_trip structures
which means that exactly one of the two values is set in each argument. But
in order to not have bugs elsewhere leed to crashes here, be more tolerant
of malformed argumnts.
Fixes CID 350100
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should never happen based on the logic in the callers, but just
to be on the safe side.
Should fix CID 350128
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To allow efficient moving of downloaded dives from the download
thread to the model, implement a general move function that
moves table data. Instantiate that function for the dive and
dive_site tables.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We used a table lookup for CNS equivalent times. Turns
out the log of this table falls pretty much on a straight
line for po2 <= 1.5bar. We now fit this tabel two two
lines, one for <= 1.5 bar and one above. This four
parameter fit has half the sum of errors squared
than the five parameter fit using a fourth order
polynomial.
Fitting the log has the advantage that this never
crosses 0, which would have the bad effect of
resulting in negative CNS values as we divide
by the table value.
We don't adopt a maximum pO2 cut-off for the CNS calculation
but rather live with the large values that the interpolation
formula produces when extrapolating.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
For better encapsulation, use clear_git_id() in clear_dive_file_data()
instead of setting saved_git_id directly.
Thus, memory management of the saved_git_id value is encapsulated
and can be modified more easily.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the fixed-size weightsystem table by a dynamically
relocated table. Reuse the table-macros used in other parts
of the code.
The table stores weightsystem entries, not pointers to
weightsystems. Thus, ownership of the description string is
taken when adding a weightsystem. An extra function adds
a cloned weightsystem at the end of the table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Another tiny step in making dive.h smaller: move function
declarations to deco.h if these functions are defined in deco.c
and don't directly concern dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When checking for trip-overlap on import, only really overlapping trips
have been considered, i.e. when dives had overlapping times.
Instead use the TRIP_THRESHOLD so that on download dives are added to
the same trip if in a two-days time frame.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Reported-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was reimplementing functionality that was already there.
Simply call the already existing function.
Thus, we don't have to export the grow_dive_table function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cns_table was only used in divelist.c. Make it of static
linkage accordingly.
The cns_table_headers enum is likewise only used in divelist.c.
Therefore move it from the header to the .c file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions were spread out over dive.c and divelist.c.
Move them into their own file to make all this a bit less monolithic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When splitting out dive computers, the dives were sorted in
an arbitrary way (according to an internal id), since all
data are identical.
Therefore, consider the dive-computer model names when sorting
dives. Equal dives are now sorted alphabetically by model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A user reports a problem when dives have the same time but different
numbers. The dives appear sorted randomly (effectively they are sorted
by an internal unique-id).
Try to sort by number for dives at the same date in this case.
Fixes#2086
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
At some places we use UTF8 string literals. Therefore, we effectively
only support UTF8 build systems. We might just as well remove all
the other UTF_* macros and use direct string literals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Adds "Import->Import dive sites" menu to mainwindow.cpp and adds the
on_actionImportDiveSites_triggered() method to prompt for the filename
to import from. The files are parsed and then any dive and trip data is
cleared before opening a dialog box to select which sites are to be
imported.
Signed-off-by: Doug Junkins <junkins@foghead.com>
The only external caller of add_single_dive() used it to append a
dive to the global dive list. Rename the function accordingly and
remove the index parameter.
The internal caller can use the local insert_dive() function, which
doesn't consider selection. That shouldn't be a problem, as the
caller is doing import.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Trips and dive sites were changed to use dive tables instead
of linked lists. But the memory used for the tables wasn't freed.
Do this.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Properly implement the unsaved-changes flag(s). Since we currently have
two kinds of changes, there are two flags:
1) dive_list_changed in divelist.c marks non-undoable changes. This flag
is only cleared on save or load.
2) QUndoStack::isClean() is used to determine the state of undoable
changes. Every time the user returns to the state where they saved,
this flag is cleared.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
dive- and trip-table functions are generated in dive.c by macros.
Move this macros to a new "core/table.h" header file.
Thus, these functions can be used for other tables (e.g. dive site)
and the trip function can be moved to a separate translation unit
(divelist.c being quite large already).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The other dive- and trip-table functions were already autogenerated.
Let's do the same for these two.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For consistency with remove_dive(). Moreover, swap parameter order
in remove_dive() so that both functions use the same parameter order.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of setting dive->dive_site directly, call the
add_dive_to_dive_site() and unregister_dive_from_dive_site()
functions. In the parser this turned out to be a bit tricky.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a dive site table to each dive site to keep track of dives
that have been added to a dive site. Add two functions to add
dives to / remove dives from dive sites.
Since dive sites now contain a dive table, the order of includes
had to be changed: "divesite.h" now includes "dive.h" and not
vice-versa. This caused some include churn.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As opposed to dive trips, dive sites were always directly added
to the global table, even on import. Instead, parse the divesites
into a distinct table and merge them on import.
Currently, this does not do any merging of dive sites, i.e. dive
sites are considered as either equal or different. Nevertheless,
merging of data should be rather easy to implement and simply
follow the code of the dive merging.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To extend the undo system to dive sites, the importers and downloaders
must not parse directly into the global dive site table. Instead,
pass a dive_site_table argument to parse into.
For now, always pass the global dive_site_table so that this commit
should not cause any functional change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To enable undo of dive site functions, it is crucial to work
with different dive site tables. Therefore add a dive site table
parameter to dive site functions. For now, always pass the global
dive site table. Thus, this commit shouldn't alter any functionality.
After this change, a simple search for dive_site_table reveals all
places where the global dive site table is accessed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Owing to a variable reuse in a nested loop, importing dive logs
with new trips could lead to an infinite loop. Use a fresh index "j".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This function was defined in divelist.c, whereas it's better located
in divesite.c. Move it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
process_imported_dives() takes four boolean parameters. Replace these
by flags. This makes the function calls much more descriptive. Morover,
it becomes easier to add or remove flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since process_imported_dives() can add dives to a newly generated
trip, this need not be done in the downloading code. This makes
data flow distinctly simpler, as no trip table and no add-new-trip
flag has to be passed down to the libdivecomputer glue code.
Moreover, since now the trip creation is done at the import step
rather than the download step, the latest status of the "add to
new trip" checkbox will be considered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If this flag is set, dives that are not assigned to a trip will
be assigned to a new trip. This flag is set if the user checked
"add to new trip" in the download dialog of the desktop version.
Currently this is a no-op as the dives will already have been
added to a new trip by the downloading code. This will be removed
in a subsequent commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The logic in process_imported_dives() was faulty: Dives are merged
trip-wise in a loop. But if only autogenerated trips were supposed
to be merged, the trip would not be added.
Change the logic to always add the trip if it is not merged. To make
the loop easier to read, factor out the merge-trip-into-existing-trips
logic into a separate function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Split the process_imported_dives() function in two:
1) process_imported_dives() processes the dives and generates
a list of dives and trips to be added and removed.
2) add_imported_dives() calls process_imported_dives() and
does the actual removal / addition of dives and trips.
The goal is to split preparation and actual work, to
make dive import undo-able.
The code adds extra checks to never merge into the same
dive twice, as this would lead to a double-free() bug.
This should in principle never happen, as dives that
compare equal according to is_same_dive() are merged
in the imported-dives list, but perhaps in some pathologival
corner-cases is_same_dive() turns out to be non-transitive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The installment of the divelist-undo system has made it unnecessary
to adopt the uniq-id of the merged-into dive. On the contrary, we
want to avoid two dives with the same dive-id in the divelist at
all costs, since get_divenr() still uses the id and thus may fetch
the wrong dive.
Therefore, don't copy the dive-id on merge.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing log-files we generally want to merge trips. But
when downloading and the user chose "generate new trip", that
new trip should not be merged into existing trips.
Therefore, add a "merge_all_trips" parameter to process_imported_dives().
If false only autogenerated trips [via autogroup] will be merged.
In the future we might want to let the user choose if trips
should be merged when importing log-files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old way of merging log-files was not well defined: Trips
were recognized as the same if and only if the first dives
started at the same instant. Later dives did not matter.
Change this to merge dives if they are overlapping.
Moreover, on parsing and download generate trips in a separate
trip-table.
This will be fundamental for undo of dive-import: Firstly, we
don't want to mix trips of imported and not-yet imported dives.
Secondly, by merging trip-wise, we can autogroup the dives
in the import-data to trips and merge these at once. This will
simplify the code to decide to which trip dives should be
autogrouped.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently trips are added to the global trip table. If we want to
make dive-import undoable, we should be able to parse trips of a
log-file into a distinct table. Therefore, add a trip_table
parameter to
- insert_trip()
- create_and_hookup_trip_from_dive()
- autogroup_dives()
- unregister_trip()
- remove_dive_from_trip()
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
