This extends the uuid matching to the low-level characteristics too, so
that we can ignore the McLean Extreme characteristics that aren't
interesting.
It also renames the uuid matching to be about a "uuid_list" rather than
being about the service we're matching, since we're now using it for
other uuid's than just services.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Silly typo with a missing 'i' in 'uuid' that happened when I wrote this
code originally, and that compiled fine thanks to the error being
duplicated with cut-and-paste to all relevant places.
Fix it now, since I'll extend the uuid matching to the actual
characteristics for the McLean Extreme.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It turns out that contrary to what the documentation states, a few languages
are still only using the 'qt' translation. But those exist for all languages,
so we need to first search for the 'qtbase' translations, and only if that
fails do we try to load the 'qt' translations.
And even that will fail for languages in which Qt simply isn't localized (like
Dutch).
To make the code more readable, the check for 'US English' was moved earlier as
there is no point to look for a Qt translation for that (simply doesn't exist).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were still using the 'qt' translations instead of 'qtbase' as we should have
been using since forever - it's a little unclear from reading the documentation
when in the Qt5 life cycle this happened, but definitely several years ago.
These are the strings used in situations where Qt already provides us with text
(e.g., the entries in the 'Subsurface' menu on Mac, or the button labels in
many dialogs).
Additionally we didn't try hard enough to find those translations in cases
where they are bundled with the app; so basically all scenarios except for
Linux distro specific packages or 'build from source' on macOS or Linux were
not going to work, even after addressing the qt->qtbase conversion.
But of course the developers pretty much all fall into those last two
categories. Still, I cannot believe we never fixed this in all those years...
To make it more obvious if we still aren't finding the Qt translations this
commit also makes that warning be shown in all cases, not just when running in
verbose mode.
Fixes#2954
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The logic to retrieve gas changes from Shearwater cloud database is
detecting only when the O2/He chnages. This change will grab the initial
gas. (Problem was only shown when there was a gas changee in the log, so
cingle cylinder dives were working fine.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Gas change is done to the cylinder we just found and not the last
cylinder. Also switching the variable name to index as we are actually
using that value outside the loop.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Shearwater apparently stores correct pressures nowadays, so getting rid
of a hack to import double pressures.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
This will ignore the gas changes that would be caused by Shearwater
cloud saving rows with 0 values in them.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
A sample log I received contains a lot of rows with 0 values in it. This
will ignore the obviously bogus ones. (However, we might miss the first
sample if that is recorded at time 0.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Seems that Shearwater cloud gives the sample time in milliseconds
nowadays. Taking a wild guess, that this logic should suffice for us to
be able to import old and newer XML logs. (Assuming that if the
timestamp for the first sample is more than 100, timestamps are in
milliseconds, otherwise in seconds.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
This continues to be useless for other people as it requires my signing key,
but when signed like this I can then successfully submit the dmg for
notarization, so I'll update the signing script in order not to lose that
magic...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Usually people will install these via Homebrew, but when we need to build
everything ourselves (required for release binaries), then these two were
missing before.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we set the size on the QPushButton, the button no longer receives any input
(tested on macOS). With this change we get an odd visual artifact when clicking
on the 'add' button, but it least it works, so this is good enough for the next
release.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
core/device.h was declaring a number of functions that were related
to divecomputers (dcs): creating a fake dc for manually entered dives
and registering / accessing dc nicknames. On could argue whether
these should be lumped together, but it is what it is.
However, part of that was implemented in C++/Qt code in a separate
core/divecomputer.cpp file. Some function therein where only
accessible to C++ and declared in core/divecomputer.h.
All in all, a big mess. Let's simply combine the files and
conditionally compile the C++-only functions depending on
the __cplusplus define.
Yes, that means turning device.c into device.cpp. A brave soul
might turn the C++/Qt code into C code if they whish later on.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The functions matchDC() and matchModel() were never implemented.
Remove their declarations.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function *looks* like it is a dive function. However, in reality
it implicitly works on the global device list. Therefore, it is
thematically more aptly located in device.h with the other device
functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The SAC factor is only used for minimal gas calculations which
don't make sense in the CCR context.
Additionally, make bailout stop for at least minimum switch
time or problem solving time.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This gets us back in sync with upstream, minor changes to Shearwater Peregrine
support, but also fixes an issue in my implementation of Shearwater info events
on dive computers using the new format which inadvertantly disabled freedive
support.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Once again I have managed to get out of sync in numbering between iOS
and Android. I'll make new releases with the correct version number on
both platforms today.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In a previous commit, auto-filling of weight based on type was
changed to be only performed if the user hadn't already set a
weight, by testing for weight=0.
However, when the user edited the type and tabbed back and forth,
that counted as an edit and therefore the weight would not
change anymore.
To refine this, introduce an "auto_filled" flag to the weightsystem,
which is set if the weight is automatically filled and cleared if
the weight is edited. Update the weight if it was zero *or* auto-filled.
The flag is not saved to disk, but that should be acceptable. If the
user saves and reloads, we can assume that they meant the weight
to be set to the default value.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing from other software, it happens that weights are imported
without their type. When the user changes the type, the imported weight
is overwritten, which is not exactly a friendly behavior.
On the other hand, when changing the type after creation of a weight
entry, it is preferrable to set a default weight. This is convenient
for people who commonly use the same weight.
As a compromise, set the default weight only if it was unset. We
recognize this by a weight value of 0 g.
Fixes#2938
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This functionality never came to be and there are fundamentally
different plans floating around. Therefore, remove these empty
files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In commit 62d87e9d25 ("Planner: handle zero
length segments when replanning") a change to libdivecomputer snuck in that
undid the addition of Shearwater Peregrine detection.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
User request: when entering a cylinder type, do a substring
search. For example, when entering "100" also find "AL100".
Currently, a starts-with search was used.
This is simply done by setting the "filterMode" of the
ComboBoxDelegate to "Qt::MatchContains".
Suggested-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function was called on a freshly copied dive, which has its git cache
invalidated automatically in copy_dive().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
delete_divecomputer had legacy code, which
1) invalidated the git dive cache
2) made sure that the dive computer was not displayed anymore
However, both callers called on a freshly copied dive, which
has its dive cache invalidated in copy_dive() and can't be
the currently displayed dive. Therefore, this code is dead
code and can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is a number_of_computers() function which does
the same thing with two exceptions:
1) checks for null-dive
2) returns an unsigned int
Replace calls to count_divecomputers() by calls to number_of_computers().
In one case, the return type makes a different - add a cast to int there.
Ultimately, we should probably change the dc_number to signed int
throughout the code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When planning a dive, dc_number was set to 1, which actually is
the second dc! The code seems to handle this gracefully, however
it appears weird. Let's set dc_number to 0 instead.
Originally, the assignment was introduced in a422957cd6
and moved later in 4f5621c4c6.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This helper function is not used outside taxonomy.c anymore.
Let's hide this implementation detail.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of getting the index and using that to access values, use
the taxonomy_get_value() helper function. Two places are affected:
1) reverse geo-lookup
2) location filter delegate
The behavior of reverse geo-lookup is changed slightly: now an
empty string is likewise recognized as missing "TC_ADMIN_L3".
Before, only a missing category was interpreted as such.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is the counter-part to taxonomy_set_value(). Let taxonomy_get_country() be the
first user of the function. If a category doesn't exist, return NULL.
Small addition: make taxonomy_get_countr() take a const argument.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
get_dive_country() was essentially a reimplementation of taxonomy_get_country().
Let's just use the already existing function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of recoding the "search for category" loop, reuse the already
existing functionality.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The alloc_taxonomy()/free_taxonomy() interface was exceedingly strange.
The former gave a "struct taxonomy", the latter took a "struct taxonomy_data".
To make things worse, is appears as if the names "taxonomy" and "taxonoma_data"
are reversed: the latter contains the former.
In any case, the alloc_taxonomy() call is not needed anymore from outside
taxonomy.c, as these memory-management details are now hidden in accessor
functions. Therefore, make the function local to taxonomy.c. Moreover,
rename it to "alloc_taxonomy_table()" and let it take a "taxonomy_data"
structure for symmetry with "free_taxonomy()".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of manipulating the taxonomy structures directly, use the
taxonomy_set_category() function. This improves encapsulation and
gives us the possibility to improve the taxonomy data structures.
This concerns three places:
1) git parser
2) XML parser
3) reverse geo-lookup
This improves the XML parser code slightly: The parser assumes that
the value-attribute comes last (after origin and category). While
it still does that, it now at least generates a warning if it encounters
a value-attribute without origin- or category-attribute.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
