This makes us parse everything we save, and I can load my XML file, save
it as a git file, load that git file, save it as a new XML file, and the
end result is identical.
Well... *ALMOST* identical. We currently don't save the dive computer
nickname and serial/firmware information in the git repository, so that
does get lost in translation. But all the actual dive data is there.
NOTE! I have currently only worked with my own dive files. They are
reasonably complex and complete, and do have a lot of the interesting
cases covered (like multiple dive computers etc), but there's no CCR
information, and all the dives are in trips, so this does need more
testing. It's at the very least very close.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the sample parsing helper function for key-value pair parsing
more generic, and uses it for parsing cylinders and weightsystems too.
Events still to go, and then we have the "setting" section (for dive
computer nicknames and firmware information) that we don't actually save
yet in the git format.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This gets us the stopdepth, cns, bearing etc information. We're getting
really close to parsing everything, but are still missing event parsing,
and cylinder/weight data.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This doesn't yet parse the (less common) "key=value" type sample data,
so it's not complete, but the framework for that is in place too.
With this, we now parse all the basics, and the most noticeable missing
part is the cylinder and weigthsystem data. Lack of cylinder data in
particular means that SAC-rates etc don't get calculated, but other than
that it looks almost complete - you don't miss the missing event and
sample details unless you look for them.
I'll get the missing pieces done too, but this basic sample parsing was
visually a big step.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some things are still missing: samples and events, and cylinder and
weightsystem information. But most of the basics are there (although
the lack of sample data makes a big visual impact)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This implements the simple line parser (including the multiline strings
with escape characters). What a difference a good file format makes:
this is nothing like the pain that is XML.
That said, it only does the line/string parsing right now, it doesn't
actually then look at what the lines say. So no human-noticeable
improvements in the actual data shown by subsurface.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we want to scale to thousands of dives, we'll eventually want to read
the dive computer files lazily when actually needed, but for now we do
everything synchronously. Even if that may actually be slower than
parsing one big XML file.
The git object store is pretty efficient, but especially with some
history, the compression and delta application will certainly not be
free.
This does all the git object unpacking, but none of the actual data
parsing yet. But as part of looking up the file objects, we do get the
dive number (which is in the name of the dive file).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The biggest part of this commit is the comment about the woeful state of
the "git_tree_walk()" interface - the interface is not really very good
for seeing any recursive state, since it just walks the tree pretty much
linearly.
But the only real recursive state we care about is the trip, and in all
normal situations the "trip this dive is in" is the same thing as "what
was the last trip directory we traversed", so a linear walk works fine.
The one exception is if a dive isn't in a trip at all, in which case
"last trip directory" obviously isn't what we want.
But rather than do our own tree walking by hand (and just passing the
trip information in the natural recursive manner when traversing the
tree), we hack around it by just looking at the path to the dive.
That one-liner trivial hack has now generated about 20 lines of
explanation of it.
ANYWAY. With this, we parse the dive and trip hierarchy properly, and
instead of just printing out the data, we might as well insert the dives
and trips into the subsurface data structures.
Note: the only data we have about the dive and trip right now is what is
visible in the directory structure, since we don't look at the actual
dive file at all (not even the name of it, which contains the dive
number). So the end result will be just a sea of empty dives and the
trips they are contained in. The dives have a date and time, and the
trip has a date, though.
So this is *not* useful for actually saving and loading data, but the
data we do load is easily visualized inside subsurface, so as I'm
starting to add real dive data parsing code, it will all be much more
visually satisfying.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a top-level "00-Subsurface" file that sorts first in the git
tree, and contains version information, dive computer nicknames and
settings. Although right now the settings are just the autogroup thing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Oops. Really stupid bug in event saving, resulting in bad event lines,
that I didn't notice until I started trying to parse them.
The argument order is a bit mixed up, which is partly why this happened.
But considering that this is the worst bug I've hit so far in the saving
code, I guess I shouldn't complain too much.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We want to make sure that we load them in the same order we save them,
and while using the hash made the divecomputer names unique, it didn't
sort them. You couldn't tell with just one or two dive computers, but
if you have three or more dive computers on a dive, the order of any but
the first ended up depending on the ordering of the unique hash
extensions.
So just append a numeric index instead of relying on the hash to make
the names unique. But skip the index if there is just one dive
computer.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had all in place, all that was missing was to actually load
the position stored on the settings for the tooltips.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code cleanup fixes the two issues that I raised on
my last e-mail. hurrah.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm ashamed. put_vbuffer() worked perfectly fine for the normal case
when everything fit in our simple buffer on-stack, but the fallback case
was broken in so many ways that I'm just going to go sit in a corner and
cry myself to sleep.
And dammit, I _knew_ how to do it right. I knew you had to do a
"va_copy()" and couldn't just keep re-using 'args'. I've done this
before. But I half-arsed it, and nobody ever noticed, because you
wouldn't do C style format strings for big strings.
"128 bytes is enough for everybody".
And as penance for this idiocy, I just spent too much time trying to
figure out what was wrong in my git loading code when my debug printouts
caused SIGSEGV's.
Sigh.
Anyway, now it should hopefully be correct, and the code is smarter
about things too, not having that extra buffer since we already *have* a
buffer in the "struct membuffer" we are working with.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It doesn't actually parse the files themselves, but it does walk the
object tree and print out the dives and trips it finds.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of hardcoding the regular file mode (0100644 is the traditional
Unix S_IFREG file mode with -rw-r--r-- protections), use
GIT_FILEMODE_BLOB (and GIT_FILEMODE_TREE for 040000 - S_IFDIR).
The numbers were historically indeed the regular S_IFREG/S_IFDIR values,
but since those aren't portable, git ended up defining their own.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the colors on the new profile, the init of the colors map
was not being done. This fixes it.
A few problems were spotted on the new profile dealing with the ruler
graph and a newly added dive, when using the dive add dialog.
I'll be on it later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes up the writing of the git format to the point that it might
be getting close to complete. In particular:
- Add subsurface version information into commit message as requested by Dirk
- Fix missed string quoting ('\' needs to be quoted as '\\')
- rename "git_save_error()" as "report_error()", since we'll want to
use this for the loading code too.
- Improve on dive and trip name generation
- create a date-based directory hierarchy
- save dive computer data as individual files
- actually save the trip information
There might be further changes as I start to actually *read* the git
files, of course.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't know why I didn't do this from the beginning. We often build up
a membuffer and then want to use it as a C string. You could do it by
hand by adding the zero byte at the end, but that's just annoying.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the following to your qmake command line and things should compile
again:
qmake ... CONFIG+=libgit21-api
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just removal of dead code from the old profile, probably there's
still a bit more to remove, but this is a very good cleanup already.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is simply a code removal, nothing was touched besides the
profilegraphics.h/cpp files.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch partially removes the code for the old profile from
Subsurface. It removes the use of the old profile on the mainwindow,
but keeping the code in the tree for now.
A bit of code-cleanup also entered this commit because I had to change
every instance of the code that used the old profile.
Now to the real code-cleanup
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The ruler is a weird beast - it has two child objects that access the
parent to call another function, that call the child functions.
When I updated the plot_info I didn't take that into consideration, what
happened is that when I set the parent's plot_info, the children's
plot_info are still invalid, but the update method is called anyhow.
This patch updates all plot_info's before calling anything else.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Linus was wrong - the change to the API happened after 0.20 was released.
So libgit2 0.20 still needs the fix.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should never read cur_pr[cyl] if cyl isn't used during a dive - but for
cylinders that are used cur_pr[cyl] is initialized. But just to catch
errors elsewhere, let's not leave cur_pr[cyl] uninitialized.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This saves the dive data into a git object repository instead of a
single XML file.
We create a git object tree with each dive as a separate file,
hierarchically by trip and date.
NOTE 1: This largely duplicates the XML saving code, because trying to
share it seemed just too painful: the logic is very similar, but the
details of the actual strings end up differing sufficiently that there
are tons of trivial differences.
The git save format is line-based with minimal quoting, while XML quotes
everything with either "<..\>" or using single quotes around attributes.
NOTE 2: You currently need a dummy "file" to save to, which points to
the real save location: the git repository and branch to be used. We
should make this a config thing, but for testing, do something like
this:
echo git /home/torvalds/scuba:linus > git-test
to create that git information file, and when you use "Save To" and
specify "git-test" as the file to save to, subsurface will use the new
git save logic to save to the branch "linus" in the repository found at
"/home/torvalds/scuba".
NOTE 3: The git save format uses just the git object directory, it does
*not* check out the result in any git working tree or index. So after
you do a save, you can do
git log -p linus
to see what actually happened in that branch, but it will not affect any
actual checked-out state in the repository.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can't keep the cache around (even though it's tempting) as the next
iteration might change the start time of the planned dive or other
parameters which would make the cached data invalid.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is rather academic, but it will make Coverity happy.
If we start running out of memory we should make sure we don't leak any
more memory.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In most cases the existing code might have done the right thing, but some
of the hard to reproduce errors might actually stem from the fact that we
have intermittend fs errors. Maybe this addresses things?
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
clang-format doesn't appear to reindent multi line #define statements
correctly - so this hopefully will clean those up.
The included whitespace corrections to the code should stay in place when
using the updated tool.
This includes cleaning up some multi-line comments that were messed up the
last time around as well as a few other minor changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This modifies the INSTALL file to offer MacPorts based instructions.
Signed-off-by: Giuseppe 'ferdy' Miceli <ferdy@ferdy.it>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Move the buttons of the profile window around to have more sane positions.
- All the buttons affecting the ceiling(s) are now grouped together.
- All the buttons affecting the Information Box are now grouped together.
- The previous icon for "Show calculated ceiling" has been reassigned to
"Show all tissues"
- A new stand-in button hav been included for "Show calculated ceiling"
Signed-off-by: Willem Ferguson <willem@willem-Precision-M4700.(none)>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
