This isn't perfect (if you make multiple requests things could go badly),
but it's better than just slapping the new password into the settings,
even if the update failed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make precedence of && over || explicit.
Explicitly convert between char * and unsigned char *.
Don't assign potentially negative return code to an unsigend variable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we can selectively turn off Facebook support.
And turning off both Facebook support and support for the user manual
allows us to not rely on QWebKit which once again allows debugging
Subsurface with valgrind on Arch Linux.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Designer is such an utter piece of crap I am at a lack for words.
After a few hours with a real UI tool (i.e., vim) I have the preferences
dialog reasonably close to where I want it. It's still not perfect, but at
least it no longer contains tons of unused space, it fits fine on a
1024x768 screen and it is visually consistent across the different pages.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simple preferences infrastructure with default prefs, prefs and hooks for
the Qt Settings system and our preferences ui.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code didn't trigger the update routine after PIN verification, only if
just email/password were shown. A simple oversight. This is fixed now and
so the visibility of cloud open and cloud save options should refelect
whether verified credentials are in the preferences or not.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just deals with the mechanics. There is no UI to enter / change this
URL (and that's intentional), neither is it used, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we don't have verified cloud credentials disable the menu options and
disallow the use of cloud storage as default data file.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Correctly tracking the status of our authentication with the cloud service
is non-trivial, especially since the user may quit Subsurface between
registering and verifying an account, they might even register on one
machine and verify on another.
This tries to make sure that when in doubt we check with the cloud service
backend. And we show errors in the UI.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This now sets the preference variable / config entry and keeps them in
sync. Doesn't actually change the behavior at program start, yet.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user didn't enable saving the password to the preferences, then the
password was cleared out as the preferences got synced.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This triggers when the email address / password is changed in the
preferences. It opens an https connection with the backend server (the URL
is hardcoded) which should create an account with these credentials.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Cloud storage makes more sense that remote storage - at least I assume
that more people are used to thinking about "storing things in the cloud".
Don't use PIN or passphrase, call it a password everywhere.
Don't use copy_string() to copy the password - the git credentials routine
asserts that password is not NULL, so make sure we at least have a pointer
to an empty string here.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows entering / storing the PIN (aka passphrase) for the ssh key.
The email isn't used, yet - this will be used by the automated backend to
create a unique git repository that will turn into the remote storage.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While we don't expose it as this to the user, we'll need an ssh key and
potentially a passphrase in order to communicate with the git server in
our infrastructure. This simply sets up a way to store the passphrase.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a field to the units preferences to have GPS coordinates
show as decimals (as for example Google maps does it).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's now set up from the mainwindow.cpp file.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Show either the login screen or the disconnect button, plus some text that
explains what the user is expected to do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch creates the possibility of viewing the individual sensor
values when the po2 button on the profile toolbar is activated. This
follows exactly the procedure for optionally displaying the setpoint
values while viewing po2. A checkbox in the preferences panel determines
whether sensor information is shown. By default it is set to OFF. When
checked, and the po2 button is activated, sensor1 values are shown in
grey, sensor2 in blue and sensor3 in brown.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Lots and lots and lots of header files were being included without being
needed. This attempts to clean some of that crud up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ignore QWebView instances in the preferences dialog when compiling under
Android, as QWebView is not yet supported under Android.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a CCR dive is viewed and the toolbar button for PO2 is activated,
both the PO2 (green line) and the O2 setpoint (red line) are shown.
This allows evaluation of the PO2 in the CCR loop with respect to the
pre-configured O2 setpoint.
The setpoint graph can be disabled from the Preferences/Graphs tab
by checking the appropriate checkbox.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This now is chosen directly from the popup box that appears when you try
to send a picture to facebook.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All Facebook related stuff now is on SocialNetworks.h/cpp
this makes it much easier to implement things and looking
for bugs.
working:
- logging in
- getting user id
- getting album id ( or creating it )
*much* more testing is needed, of course.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We still need to do a lot of stuff on that part.
Currently when asking for sending a profile, it will just
create a private album.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added a button to disconnect from facebook.
This clears the webview cookies so it correctly
disconnects us from facebook, and clears the
access token.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can now correctly connect to facebook endpoint. Nothing
really fancy at the moment. =/
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This piece of code allows subsurface to login with facebook
using the 'Subsurface' app created within facebook for secure
reasons. I'm the admin of it currently - but I'll pass it to
Dirk as well.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a toolbox icon to turn on a tissue plot inspired by the bar
graph of the Sherwater Petrel,
It shows the inert gas partial pressures for individual compartments. If
they are below the ambient pressure (grey line) they are shown in units of
the ambient pressure, if they are above, the excess is shown as a
percentage of the allowed overpressure for plain Buehlmann. So it has the
same units as a gradient factor. Thus also the a gradient factor line (for
the current depth) is shown.
The different tissues get different colors, greener for the faster ones and bluer
for the slower ones.
Positioning and on/off icon action still need some tender loving care.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
