When completing tags, the case of the completion prefix
should not matter.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 0f50b73f9e ("Fix planner / add dive handling of DiveHandler
Points") some issues were introduced. While it is fine to remove the
artificial first point at the surface, the commit broke the special
handling for o2 == -1, i.e., the usual case where a default gas needs to
be picked.
This generalizes the algorithm previously used to also look to the right,
now that we are no longer guaranteed that there is a first point to our
left.
This also cleans up some whitespace damage introduced in the same commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk, is this really necessary or it's just something that you forgot
to remove? this is adding a bit of pain to fix some issues on the planner,
so I'm commenting this out untill you have a bit of time to look at it.
It looks like this was added to handle the gas in the pos-1, but you reverted
if so, this completely reverts it, and things works as expected again.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds the first DiveNode at 5m / 10 minutes when clicking on the plus
button on the DiveNotes Table.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Somewhere we broke this, most probably in the code that activated the
planner to be used together as an 'add dive'. This commit makes the code
workable again.
There's one thing, though. if the model is empty, this will add something
in the first point - it's behaving strangely. I'll try to fix this in a
way that's invisible to the user, but overall, why are we inserting
something in the first(0,0) time and depth?
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The air types model had a font bigger than the
other models, this patch creates a data() method
that correctly delivers the correct font.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
What happened before was that the AirTypes model was only being updated
when the user requested to change the air by clicking directly
on the Air, in the planner ( but not on the Air Table. ).
This fixes it by calling 'repopulate' whenever the cylinder model
changes ( by adding, removing and changing something.)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch closes the air list when clicing outside of it,
making the use of the planner more pleasant.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rewrite of the way we handle the last used directory for the loading /
saving of files.
we didn't reuse anything for the code, and that's error prone
and also dumb =p. Reworked that so we have a nice method
to help us out on that. lastUsedDir and updateLastUsedDir
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can wire qt to call the right functions directly, so we don't need
these members.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Switch to using a QSpinBox instead of a QLineEdit. This makes it a bit
more intuitive and now you can see how the deco plan changes based on
the GF's.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the Gtk version there were no option to disable the showing of time
in the mouse over, so this removes that option to limit the amount of
clutter in the settings panel.
This also renames the time and temperature to match the names they used
to have. T -> @, Temp -> T
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Mostly based on suggestions by Tomaz and Luisa (but with some changes
based on my rather strongly held believes).
I also tried to clean up the shortcut keys. Not sure if I got this right.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This failed spectacularly when I first tried it, so I put it on the back
burner. And it appears that with all my recent fixes for "add dive" as a
side effect this is working, too.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I probably broke this a while ago, as I was not using the big
dirk dive file to test ( just using some random files over the
test folder. )
Now it's working as it should.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last commit correctly setted the minimumSize, but
I forgot to set the maximum size, and thus, it still
expanded. sigh.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the Air Types widget on the planner smaller,
since on most dives users will only enter 1 to 2 dives, it's
not good to have so much whitespace. this makes it smaller for
small screens, and it will grow on bigger screens where space
is not an issue.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixes the last column adding a horizontal scroll on the dive list,
since we have the hability to show / hide columns, I had to create
a helper method to discover what is the last column and set the
size of it very small so no scroll is created.
Also, I'v set the setStrechLastSection to true. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the edition of alphanumeric input,
columns like depth accepted '23ft', '20m' or '30', with
an inplicit conversion to the unit. But the code ignored
that the input could have a 'ft' or 'm' ( ot anything else
for that matter.
Signed-off-by: Taiane Ramos <exhora.tat@gmail.com>
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit scares me. Any pointers to dives or indices into the dive
table... anything like that is invalid after we resort the table. Well,
not technically "invalid" (as in bad pointers), but after re-sorting the
table these will possibly not be pointing at what we expected.
This starts with the selection being "wrong" after we add a dive that
isn't the last dive (once we click OK the chronologically last dive will
be selected).
But of course without doing this, our #1 assumption about the dive_table
is broken. The dive_table is supposed to be in chronological order.
Best advice of course would be "don't enter dives out of order" - but of
course that's not realistic.
Fixes#234
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is subtle. Normally you would expect someone to edit the tank data by
simply clicking on it in the equipment tab. But a user could conceivably
edit the tank data after clicking on the profile editing button instead.
This works now as well.
This also addresses the issue that start and end pressure were not shown
in profile editing mode.
Fixes#235
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We remember what was selected before and restore it. Maybe there's a more
"Qt way" of doing this, but my implementation appears to work :-)
Also remove unconditional debug output that snuck into an earlier commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When right clicking a dive on the divelist a dialog for selecting a dive
was opened. However, Save As requires a getSaveFileName dialog so that
user can give a new file name as well as selecting an old file to
overwrite.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I missed this one spot when converting back to the different semantics for
divedatapoints.
With this change add dive appears to work correctly (fingers crossed).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We carefully assembled the correct data in the cylinders - don't replace
that data when manually editing a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise adding a second cylinder (to the default one cylinder of air)
and subsequently changing the gas of that cylinder will illogically change
the gas used in all the segments.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- you can no longer delete a tank when its gas is in use
- therefore you can no longer delete the last tank
- when you change the gas mix of a tank, the corresponding segments in the
dive change as well
- when changing gas for a segment the correct available gases are offered
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now hardcoded to AL80. This way in the future we'll have a volume of
gas that's available. And this makes much more sense then a random string
in the description field.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the argument could be made that this is just a symptom of Subsurface
getting very confused about the selection (which it still gets at times -
most likely we are calling select_dive() instead of selectDive() (or the
corresponding deselect functions) in places where we shouldn't), but
either way, we should not crash.
Fixes#220
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We previously did did bad things when running with an empty configuration.
This attemps to clean it. We will now correctly handle the splitters in
almost all cases ( if I didn't break anything on the way. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the offending commit a QWidget was changed to QTableView, but
only in the header - and thus making avaliable all method calls,
but the initialization of the widgets was still a QWidget, and
nothing of QTableView was used besides an incorrect call to
setColumnHidden.
This commit fixes that by using the view() method provided by the
TableView implementation which returns the true QTableView that should be
used for specific nitpicking, like hidding columns. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Let the user choose if the calculation of ndl and tts is worth the time
it takes.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously gps information was always overwritten, unless the user had
modified it in the current editing session. This causes problem with
some use cases, like when coordinates are provided before the location
name by the companion app.
Now gps information is only overwritten when it is:
- Empty
- Auto-completed in the current editing session. (When the user hits
accept it is considered hand-edited.)
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This now offers the correct gases for which we have cylinders defined.
For both the planner and add dive we still don't end up with the correct
cylinders in the resulting dive. But that's for another commit to fix.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should leave the program in a consistent state after add dive was
cancelled (and do the right thing in case the dive list was empty).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just makes sure that we do the right thing with the staging drive,
that we don't mess up the selection, the we are smart about using our
helper functions, etc.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This partially reverts changes in commit 1b655d5c806b ("Correctly track
gases when manually adding and then editing dives") as it turns out this
did NOT help us correctly track gases (which is ironic, given the title of
that commit). I didn't actually want to revert that commit as
infrastructure has changed since then and this made the patches look even
more incomprehensible.
So we are back to tracking the "gas on which we arrive at this spot" in
each dive plan node as this makes the rest of our planning so much easier
- I had forgotten about the reasons why we did things this way when I made
the above mentioned commit.
Instead we now make sure that our available tanks are added the correct
way, that such entries are ignored when planning and when drawing the
editable profile, and that at the end it all gets assembled correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To make the planner work this adds a new column to the Cylinder widget
(depth - for the depth at which we want to change to a certain gas
during deco).
This also tries to hide that column in the equipment view and hide the
start/end pressure columns in the planner view. Oddly that fails :-(
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now the gases for which we have cylinders are offered in the gas selection
list and correctly recognized and added for the plan.
Still tons of work to be done to make this work the way it is designed,
but we are getting closer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This caused us to get royally confused when manually adding a dive and
trying to set the location through the marble widget.
Fixes # 229
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is in preparation of using those to define the gases available for
planning.
Right now this doesn't seem to work quite right - I don't get the
auto-completions for the cylinders that I was hoping for...
This commit also corrects the tooltip for addint dive data points.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is intended to allow the user to provide the gases / cylinders that
she will be diving with. With that information the planner can warn the
user about insufficient gases, but more importantly it can show relevant
gases in the gas select drop down.
Right now the add cylinder button doesn't add a cylinder - that's a
problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Insert the dive data point at 0,0 manually at the beginning of the plan.
Now everything should work. We still can't edit a plan created like this,
but at least we can once again plan things.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So in case the OK button was relabeled to 'Retry', relabel it back to OK.
Also, 'Retry' should be capitalized.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The user could add a dive, and in the middle click on the 'plan'
button. Since we didn't cared about that on the widget, a lot of
inconsistencies could occour. this fixes that by setting a flag
on the Planner, that has now three modes: nothing, plan and add.
(maybe in the future an edit mode will be valid too.)
If in 'NOTHING' mode, user can enter the addition, edition and
planning. If in any other mode, user can't do a thing. The mode
gets back to NOTHING when user accepts or cancels a plan / add
/ edition.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Garbage was left behind when canceling edit dive, and thus when the user
set his dive to be editted, after a first canceled edition, all points of
the first edition got messed up and showing on the second dive too. if the
user clicked 'ok', he got a really bad surprise.
Fixes#226
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
This patch saves and restores the state of the TreeView after the user
clicks on another columns that will make the tree disappear. All of the
branche states are saved, this way the expanded nodes will be restored
when the user gets back to tree mode.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a try: when the user changes the orientation on the columns
by clicking on the title of them and organizing by something that's
not the number, we lost track of the opened branches. this commit
doesn't fix that, but it fixes a possible similar issue.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
I got a bit lost trying to find the code that handled DiveList columns
today, so I thought it was better to move it to its file, after all we
do have a divelistview.h :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just proves one point: I'm retarded.
I moved some code around and forgot to close the old group, so I created a
group inside 'MainWindow' that handled the ListWidget, wich was not the
right thing to do at all.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I basically rewrote the way we handled the splitters. It now uses a state
to know what it's doing, and will only update the value of the
saved-to-disk splitter size if the state shows the splitters (currently
only VIEWALL), where all the other states should hide the splitters, and
the values of the splitters don't matter.
Fixes#225
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code had quite a few odd special cases that may have been left-overs
from the old Gtk algorithm. With this the gas is actually in the dive plan
node where it's use starts. And we maintain the gas correctly between
multiple edit sessions.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to make sure that the correct segment has the correct gas assigned
to it - and that those gases are correctly tracked when editing a manually
added dive as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Because of rounding issues we need to use our macro to test for air
(especially since the events store gas percentages and not gas permille).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the model name is written into the XML file it has to be a literal
string that isn't translated. Otherwise a datafile written in one locale
behaves differently when opened by Subsurface under a different locale.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When dealing with autocompletion, tag usually means "take this, move on".
In the tag widget the tab was added to the tag itself (and then stripped
when the input line was processed). Not exactly useful.
This feels a bit "hackish", but it seems to get the job done.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On equipment tab, when editing a cell and then clicking on cancel button,
it would delete all the cylinders table. Now it performs the original
behaviour of recovering the original value of the cell and don't delete
the table.
Signed-off-by: exhora <exhora.tat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also hide ui.CoordinatedLabel when editing a trip,
since ui.coordinates is hidden.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I still wonder if we have all the semantics correct for multi dive
editing. This will need more testing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When merging dives, the indices of the following dives change - so we need
to adjust the variable used in the for_each loop.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A call to DiveListView::reload always reset our sortcolumn to be 0.
Instead we are tracking the correct sort column and sort direction.
This also removes an obsolete private member that was unused.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The TagWidget behaves now similiar to a QLineEdit.
Pressing Enter/Return will now close the completion widget.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
A custom tag widget has been added to MainTab.
Tags are seperated by a comma ",". The implementation
supports escaping a comma by using "\,".
While typing, the widget supports the user by suggesting
tags using a QCompleter.
Signed-off-by: Maximilian Güntner <maximilian.guentner@gmail.com>
This enables undo for the edit mode on added dives, it uses the
premade backup to fill the old dive with data. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Changed the backup implementation of the samples on EditDive,
it's way cleaner now what's happening, and it's also better for
the cancel edit.
Next: The Cancel Edit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
This patch enables editing a dive that was manually entered,
it doesn't cover dive plans yet because on the plan I need to
figure out what are the 'user-entered' points, and what are
the algorithm point. and I feel lazy. =p
One last thing that's missing is to revert the dive to the
previous condition if the user cancels the edition, currently
canceling and applying ok is the same thing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Added a new option to edit the dive in the profile view. The option
will only be visible if the dive was manually entered or if the dive
is a plan.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
We cannot use tr("").toLocal8bit().constData(); on a function
that expects a char* because the object will be deleted on the
next line, so a strdup is necessary.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
This adds alt-f shortcut to access file menu as well as other similar
alt based shortcuts for other menu items.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The setupSplitters method was created quite a while ago
to deal with the splitters when I didn't used a more sane
approach. I forgot to delete it back them, removing now.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
