The reverseGeoLookup() fetches dive-site data via GPS coordinates.
The coordinates and the result were passed via the global
"displayed_dive_site" object. To make data-flow more clear,
pass data as in and out parameters instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Fetching the taxonomy from GPS coordinates was implemented in
a QThread. But the only access to the main function was a
direct call to run(). Thus, the thread was *never* started.
The function call was always asynchronous [it was using an
event loop though, so the UI doesn't hang]. Notably this
means that the signals connected to the thread would never
fire. And the spinner would never be activated.
Thus:
1) Turn the thread into a simple function.
2) Remove the spinner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For increased maintainability, use the same columns, roles and
the same accessor function for both dive-site models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Under certain conditions the user was presented an ugly
"invalid dive site" message. The condition would arise because
the proxy-model which selects the list of dive sites and the code
which creates a proposed dive site name had different filter
conditions:
- The proxy would select any dive site containing the text
- The name-proposing code searched for dive sites *starting*
with the text.
If the user entered a text contained by a dive site name, but
no dive site would start with the second line was filled with
a dummy text. This text would be kept if it contained the text
entered by the user.
To avoid this problem, if no dive site is found, use an empty
string instead. This will be filtered out by the proxy because
it does not contain the user-entered string.
Yes, that's horribly subtle, therefore add a comment. But ultimately,
this should be solved in a less brittle way.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive site list was connected to centerOnDiveSite(). Apparently,
the currently selected dive site should have been shown in the map.
Yet, this never worked, because the actual dive site of the selected
dive had precedence in centerOnDiveSite().
It seems that centerOnDiveSite() had actually to purposes:
1) center on the passed in dive site
2) center on the dive sites of the selected dives
Therefore, split this function in two separate functions for
each of these use-cases. This allows us to remove some pre-processor
magic (mobile vs. desktop) and to remove a parameter from the
MainTab::diveSiteChanged() signal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the tooltip is hidden QInputMethodEvent is handled
by QLineEdit and works properly.
When the tooltip is visible DiveLocationListView gains
focus and receives QInputMethodEvent, without handling
them properly.
This patch just forwards the event back to the QLineEdit
object.
Fix#1405
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
strdup(qPrintable(s)) and copy_string(qPrintable(s)) were such common
occurrences that they seem worthy of a short helper-function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace constructs of the kind
s.toUtf8().data(),
s.toUtf8().constData(),
s.toLocal8Bit().data(),
s.toLocal8Bit.constData() or
qUtf8Printable(s)
by
qPrintable(s).
This is concise, consistent and - in principle - more performant than
the .data() versions.
Sadly, owing to a suboptimal implementation, qPrintable(s) currently
is a pessimization compared to s.toUtf8().data(). A fix is scheduled for
new Qt versions: https://codereview.qt-project.org/#/c/221331/
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There are ca. 50 constructs of the kind
same_string(s, "")
to test for empty or null strings. Replace them by the new helper
function empty_string().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveLocationFilterProxyModel::lessThan() used less-or-equal instead
of less-than comparison. This can lead to subtle bugs if two elements
compare as equal.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Icon aliases were complete mess.
Some icons had alias some didn't.
Named with underscores vs. hyphens vs. camelCase.
Lower vs. upper case.
"ICON" prefix vs. suffix vs. nothing.
With vs. without filename suffix.
Some didn't make sence. Eg. mapwidget-marker-gray
(I can see, it's grey, but what does it represent?)
Some were duplicated, eg warning vs. warning-icon.
Some were name after widget, which is wrong.
Do not reinvent wheel. Use widely used naming scheme
close to Freedesktop Icon Naming Specification. This
will enable usage of common icons from current set in
the future. Thus Subsurface will fit nicely to GUI.
This changes icon aliases to one, easy grep-able style.
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
Icon aliases were inconsistent mess. Underscores vs. hyphens vs. camelCase.
With vs. without filename suffix. Lower vs. upper case. "icon" suffix vs.
prefix vs. nothing. Some were duplicated, eg warning vs. warning-icon. Some
icons didn't have alias at all.
This changes all icon aliases to one, easy grep-able style which complies
to Freedesktop Icon Naming Specification (Guidelines).
Signed-off-by: Martin Měřinský <mermar@centrum.cz>
Currently when the user is typing new coordinates the
marker on the map changes location right away. Disable that and
add a 'flag' button that should be pressed instead. Also make the
coordinates update when pressing Enter or when the text
field loses focus.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Since commit 01d961086c, the location filter
list is updated if a dive site is edited. The problem is that if the
name of a selected dive site is changed, the selection is lost.
Therefore, before repopulating, inform the location filter that a dive
site changed its name. The location filter then internally changes the
name and can properly transfer the old selection on repopulate. This is
performed via the new LocationInformationWidget::nameChanged signal,
which is connected to the new LocationFilterModel::changeName slot.
A special case to be handled is the following:
[ ] Site 1
[x] Site 2
and "Site 2" being renamed to "Site 1", i.e. both sites being merged.
Here, the merging is detected and "Site 1" will likewise be checked:
[x] Site 1
[x] Site 1
No merging is performed, as the list will be repopulated anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This patch allows updating the location of map markers
while editing a dive site and updating the text in the
LocationInformationWidget in real-time.
Currently it is only possible to see the marker changes by
clicking 'Apply'.
The modification required the following changes:
- add the MapWidget::updateCurrentDiveSiteCoordinatesToMap() slot
and call it each time the GPS text updates
- separate the updateCurrentDiveSiteCoordinates(FromMap/ToMap) logic
by having the FromMap/ToMap suffix to method names
- make MapWidgetHelper::updateCurrentDiveSiteCoordinatesToMap()
call a new MapLocationModel::updateMapLocationCoordinates()
method, which updates selected location coordinates and the model
- add MapLocation::setCoordinateNoEmit() that does not emit
a signal when updating a coordinate
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
For the geo references tags update the following:
- Nicer look w/o "Tags:" text and brackets when inside location UI
- Translation for "Tags:"
- Warning message when no dive site layout categories are set
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
In certain places the '(int)' cast is used, while in other the
llrint() or lrint() functions. Make the conversation from degrees
in the 'double' form to the 'int' degrees_t consistent using lrint().
lrint() is the function which should give the best results,
because it accepts a 'double' and results in a 'long'
even if degrees_t is 'int'. If the truncation from 'long' to 'int'
is discarding some of the precision then the next step
would be to turn degrees_t into a 64bit signed integer type.
Possible fix for #625.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We never actually create a list of dive sites for which we
call the reverse lookup service, it's always just displayed_dive_site.
So make this all much simpler and just go straight for that.
This commit removes a loop, but doesn't change the indentation of the
code inside the loop to make it easier to see what was changed. That
whitespace change will be in my next commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The more I looked at the code that added the country to the dive site,
the more it seemed redundant given what we have with the taxonomy.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In desktop-widgets, remove globe.cpp, globe.h and also remove
the NO_MARBLE macro usage.
At this point the MapWidget will always be created and there will
always be a map in the application.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Wfloat-conversion enabled for C++ part of the code
Fix warnings raised by the flag using lrint
Original issue reported on the mailing list:
The ascent/descent rates are sometimes not what is expected.
E.g. setting the ascent rate to 10m/min results in an actual
ascent rate of 9m/min.
This is due to truncating the ascent rate preference,
then effectively rounding up the time to reach each stop to 2s intervals.
The result being that setting the ascent rate to 10m/min
results in 20s to ascend 3m (9m/min), when it should be exactly 18s.
Reported-by: John Smith <noseygit@hotmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The index in the fixpopup function was incorrect which caused the user to
need TWO cursor down presses to move to the second element. I changed the
index value so the user now needs only one key press to traverse up/dowm.
Fixes#954
Signed-off-by: krishan Chopra <choprakrishan61@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When typing in a partial location name, the match now considers the whole
text, not just the start of the text. So typing in "Yell" will match both
"Yellow House" and "Mellow Yellow".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we have now destkop and mobile versions, 'qt-ui' was a very
poor name choice for a folder that contains only destkop-enabled
widgets.
Also, move the graphicsview-common.h/cpp to subsurface-core because
it doesn't depend on qgraphicsview, it merely implements all the
colors that we use throughout Subsurface, and we will use colors on both
desktop and mobile versions
Same thing applies for metrics.h/cpp
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
