Selecting "Selected dives" exports the dive sites for the selected
dives. Selecting "All dives" exports all dive sites.
XML format is the subsection of the divelog XML that describes the
sites headed with a <divesites> section like:
<divesites program='subsurface' version='3'>
</divesites>
Signed-off-by: Doug Junkins <junkins@foghead.com>
Turn the table functions of the dive site handling into macros
as was already used for dives and dive trips. This has the effect
that the table is kept sorted by UUID.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a dive site table to each dive site to keep track of dives
that have been added to a dive site. Add two functions to add
dives to / remove dives from dive sites.
Since dive sites now contain a dive table, the order of includes
had to be changed: "divesite.h" now includes "dive.h" and not
vice-versa. This caused some include churn.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To enable undo of dive site functions, it is crucial to work
with different dive site tables. Therefore add a dive site table
parameter to dive site functions. For now, always pass the global
dive site table. Thus, this commit shouldn't alter any functionality.
After this change, a simple search for dive_site_table reveals all
places where the global dive site table is accessed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the XML and git savers, unchanged webservice-dive sites were
deleted. Since the webservice is not functional anymore, remove
this code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit 4d06ddd723 removed deletion of
unused dive sites on save. The corresponding variables were not
removed leading to compiler warnings. Remove the variables too.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, all trips are kept in a linked list. Replace the list
by a table in analogy to dive_table. Use this to keep the trip_table
sorted as suggested by dump_trip_list(). When inserting a trip into
the table do that after adding the dives, to avoid warnings coming
out of dump_trip_list().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Unused dive sites were deleted on save. This clashed with the undo
system in the following scenario:
1) Delete single-use dive site.
2) Save (dive site deleted)
3) Undo (reference to freed dive site)
Therefore, as a quick-fix, keep the referenced dive site around.
Note that this also means that empty dive sites must not be
deleted, as it might refer to a dive in the undo system. Instead
only clear references to empty dive sites in the global dive
table. Factor this functionality out, as it was common to the
XML and git savers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only remaining use of the tripflag was to mark dives that
were removed explicitly from a trip, i.e. shouldn't be autogrouped.
Therefore replace the enum by a simple boolean.
Currently, there is no way of unsetting the notrip flag. But this
shouldn't result in a user-visible change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The when field gives the time of the first dive. Instead of keeping
this field in sync, replace it by a function that determines the time
of the first dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the UUID reference of struct dive by a pointer to dive_site.
This commit is rather large in lines, but nevertheless quite simple
since most of the UUID->pointer work was done in previous commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of passing a uuid, pass a pointer to the dive site.
This is small step in an effort to remove uuids.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of having people treat latitude and longitude as separate
things, just add a 'location_t' data structure that contains both.
Almost all cases want to always act on them together.
This is really just prep-work for adding a few more locations that we
track: I want to add a entry/exit location to each dive (independent of
the dive site) because of how the Garmin Descent gives us the
information (and hopefully, some day, other dive computers too).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a checkbox that triggers replacement of all English characters by
x's in notes, buddy, dive guide and (while we are at it) suit.
This is ment for people sharing logs for debugging that are concious
about privacy issues. It leaves the lenth of strings in tact as well
as special charcters as those might be needed to track down a particular
parsing problem.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
In a previous commit, the get_gasmix_* functions were changed to
return by value. For consistency, also pass gasmix by value.
Note that on common 64-bit platforms struct gasmix is the size
of a pointer [2 * 32 bit vs. 64 bit] and therefore uses the
same space on the stack. On 32-bit platforms, the stack use
is probably doubled, but in return a dereference is avoided.
Supporting arbitrary gas-mixes (H2, Ar, ...) will be such an
invasive change that going back to pointers is probably the
least of our worries.
This commit is a step in const-ifying input parameters (passing
by value is the ultimate way of signaling that the input parameter
will not be changed [unless there are references to said parameter]).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, get_gasmix_from_event() and get_gasmix() return pointers
to either static or to (possibly changing) dive data. This seems like
a dangerous practice and the returned data should be used immediately.
Instead, return the gasmix by value. This is in preparation of
const-ifying input parameters of a number of core functions, which
will ultimately let the merge() function take const-arguments in
preparation of undo of dive-merging.
On common 64-bit systems gasmix (two "int"s) is the size of a pointer
and can be returned in a register.
On 32-bit systems a pointer to the struct to be filled out will be
passed.
Since get_gasmix() now returns a value, the first invocation is
tested by a NULL-initialized "struct event *". Document this in
a comment.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The index-field was misused by the IO routines to mark which dives
had been saved. Somewhat questionable, but let's at least name the
field accordingly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the last commits, the canonical-to-local filename map was made
independent from the image hashes and the location of moved images
was based on filename not hashes. The hashes are now in principle
unused (except for conversion of old-style local filename lookups).
Therefore, remove the hashes in this commit. This makes addition
of images distinctly faster.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is a space character missing in the xml generated by the
present code. Insert a space character.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
...as the usuage is not anymore about a computer but
a momentary dive mode. Rename the end indicator as well.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This provides for reading of divemode change events from dive logs
and for writing them to dive logs. This applies to xml and git
divelogs. Divemode change events have the following structure:
event->name = "modechange"
event->value = integer corresponding to enum dive_comp_type (dive.c),
reflecting the type of divemode change (OC, CCR, PSCR, etc).
In the dive log file, the event value is written as a string that
corresponds to each of the enum values, e.g.
<event name='modechange' divemode='OC' />
This xml is also read from the dive log file and translated to an
appropriate value of event->value.
The file diveeventitem.cpp was udated to reflect this new way of
dealing with divemode change events.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Since all qt-helpers are defined in qthelper.cpp, there seems to be
no reason to have two include files. By unifying the two files,
duplication and inconsistencies are removed. The C++-only part is
simply compiled away with #ifdefs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The following statement in the hashstring() function:
return hashOf[QString(filename)].toHex().data();
returns data of the temporary QByteArray generated by toHex().
Thus, the caller will access released memory, which could lead to
data corruption.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This patch allows the planner to save the last manually-entered
dive planner point of a dive plan. When the plan has been saved
and re-opened for edit, the time of the last-entered dive planner
point is used to ensure that dive planning continues from the same
point in the profile as was when the original dive plan was saved.
Mechanism:
1) In dive.h, create a new dc attribute dc->last_manual_time
with data type of duration_t.
2) In diveplanner.c, ensure that the last manually-entered
dive planner point is saved in dc->last_manual_time.
3) In save-xml.c, create a new XML attribute for the <divecomputer>
element, named last-manual-time. For dive plans, the element would
now look like:
<divecomputer model='planned dive' last-manual-time='31:17 min'>
4) In parse-xml.c, insert code that recognises the last-manual-time
XML attribute, reads the time value and assigns this time to
dc->last_manual_time.
5) In diveplannermodel.cpp, method DiveplannerPointModel::loadfromdive,
insert code that sets the appropriate boolean value to dp->entered
by comparing newtime (i.e. time of dp) with dc->last_manual_time.
6) Diveplannermodel.cpp also accepts profile data from normal dives in
the dive log, whether hand-entered or loaded from dive computer. It
looks like the reduction of dive points for dives with >100 points
continues to work ok.
The result is that when a dive plan is saved with manually entered
points up to e.g. 10 minutes into the dive, it can be re-opened for edit
in the dive planner and the planner re-creates the plan with manually
entered points up to 10 minutes. The rest of the points are "soft"
points, shaped by the deco calculations of the planner.
Improvements: Improve code for profile display in dive planner
This responds to #1052.
Change load-git.c and save-git.c so that the last-manual-time is
also saved in the git-format dive log.
Several stylistic changes in text for consistent C source code.
Improvement of dive planner profile display:
Do some simplification of my alterations to diveplannermodel.cpp
Two small style changes in planner.c and diveplannermodel.cpp
as requested ny @neolit123
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Store cylinder.depth in XML files and in git storage.
This info is in fact the gas switch depth of a specific gas/cylinder
in the planner.
This change avoids the need of typing in a user specific depth value
again when replanning an existing planned dive.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
As it is not possible to delete dive sites from the logbook, we
need to make sure that we never save sites that are not tied to
any dive. With this change, unused site that are currently in
the logbook will also be removed, so it will also clear up
(wrong) historical data.
Supposed to fix#786
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The more I looked at the code that added the country to the dive site,
the more it seemed redundant given what we have with the taxonomy.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The XML saving code got the multi-sensor case completely wrong, because
it still had one place where it would always save the first pressure,
rather than the pressure from the right sensor.
This was hidden by the fact that old data would be saved using the
legacy model that only ever used the first sensor slot. Only if you
actually had multiple sensor slots used would the bug trigger.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This does both the XML and the git save format, because the changes
really are the same, even if the actual format differs in some details.
See how the two "save_samples()" routines both do the same basic setup,
for example.
This is fairly straightforward, with the possible exception of the odd
sensor = sample->sensor[0];
default in the git pressure loading code.
That line just means that if we do *not* have an explicit cylinder index
for the pressure reading, we will always end up filling in the new
pressure as the first pressure (because the cylinder index will match the
first sensor slot).
So that makes the "add_sample_pressure()" case always do the same thing it
used to do for the legacy case: fill in the first slot. The actual sensor
index may later change, since the legacy format has a "sensor=X" key value
pair that sets the sensor, but it will also use the first sensor slot,
making it all do exactly what it used to do.
And on the other hand, if we're loading new-style data with cylinder
pressure and sensor index together, we just end up using the new semantics
for add_sample_pressure(), which tries to keep the same slot for the same
sensor, but does the right thing if we already have other pressure values.
The XML code has no such issues at all, since it can't share the cases
anyway, and we need to have different node names for the different sensor
values and cannot just have multiple "pressure" entries. Have I mentioned
how much I despise XML lately?
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Because of how we traditionally did things, the "o2pressure" parsing
depends on implicitly setting the sensor index to the last cylinder that
was marked as being used for oxygen.
We also always defaulted the primary sensor (which is used for the
diluent tank for CCR) to cylinder 0, but that doesn't work when the
oxygen tank is cylinder 0.
This gets that right at file loading time, and unifies the xml and git
sample parsing to make them match. The new defaults are:
- unless anything else is explicitly specified, the primary sensor is
associated with the first tank, and the secondary sensor is
associated with the second tank
- if we're a CCR dive, and have an explicit oxygen tank, we associate
the secondary sensor with that oxygen cylinder. The primary sensor
will be switched over to the second cylinder if the oxygen cylinder
is the first one.
This may sound backwards, but matches our traditional behavior where
the O2 pressure was the secondary pressure.
This is definitely not pretty, but it gets our historical files working
right, and is at least reasonably sensible.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a very timid start at making us actually use multiple sensors
without the magical special case for just CCR oxygen tracking.
It mainly does:
- turn the "sample->sensor" index into an array of two indexes, to
match the pressures themselves.
- get rid of dive->{oxygen_cylinder_index,diluent_cylinder_index},
since a CCR dive should now simply set the sample->sensor[] indices
correctly instead.
- in a couple of places, start actually looping over the sensors rather
than special-case the O2 case (although often the small "loops" are
just unrolled, since it's just two cases.
but in many cases we still end up only covering the zero sensor case,
because the CCR O2 sensor code coverage was fairly limited.
It's entirely possible (even likely) that this migth break some existing
case: it tries to be a fairly direct ("stupid") translation of the old
code, but unlike the preparatory patch this does actually does change
some semantics.
For example, right now the git loader code assumes that if the git save
data contains a o2pressure entry, it just hardcodes the O2 sensor index
to 1.
In fact, one issue is going to simply be that our file formats do not
have that multiple sensor format, but instead had very clearly encoded
things as being the CCR O2 pressure sensor.
But this is hopefully close to usable, and I will need feedback (and
maybe test cases) from people who have existing CCR dives with pressure
data.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We currently carry two pressures around for all the samples and plot
info, but the second pressure is reserved for CCR dives as the O2
cylinder pressure.
That's kind of annoying when we *could* use it for regular sidemount
dives as the secondary pressure.
So start prepping for that instead: don't make it "pressure" and
"o2pressure", make it just be an array of two pressure values.
NOTE! This is purely mindless prepwork. It literally just does a
search-and-replace, keeping the exact same semantics, so "pressure[1]"
is still just O2 pressure.
But at some future date, we can now start using it for a second sensor
value for sidemount instead.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The following pragma is Clang specific:
It produces a warning:
warning: ignoring #pragma clang diagnostic [-Wunknown-pragmas]
Only enable it for Clang by checking the __clang__ macro.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It turns out that we are starting to have users that have logs that go
back that far. It won't be common, but let's get it right anyway.
NOTE! With us now supporting dates earlier in 1900, this also makes
"utc_mktime()" always add the "1900" to the year field. That way we
avoid ever using the fairly ambiguous two-digit shorthand.
It didn't use to be all that ambiguous when we knew that any two-digit
number less than 70 had to be 2000+. Now that we support going back to
earlier in the last centiry, that certainty is eroding.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now that gas switch events always have indices into the cylinder table,
start using that to look up the gas mix from the cylinders rather than
from the gas switch event itself. In other words, the cylinder index is
now the primary data for gas switch events.
This means that now as you change the cylinder information, the gas
switch events will automatically update to reflect those changes.
Note that on loading data from the outside (either from a xml file, from
a git/cloud account, or from a dive computer), we may or may not
initially have an index for the gas change event. The external data may
be from an older version of subsurface, or it may be from a
libdivecomputer download that just doesn't give index data at all.
In that case, we will do:
- if there is no index, but there is explicit gas mix information, we
will look up the index based on that gas mix, picking the cylinder
that has the closest mix.
- if there isn't even explicit gas mix data, so we only have the event
value from libdivecomputer, we will turn that value into a gasmix,
and use that to look up the cylinder index as above.
- if no valid cylinder information is available at all, gas switch
events will just be dropped.
When saving the data, we now always save the cylinder index, and the gas
mix associated with that cylinder (that gas mix will be ignored on load,
since the index is the primary, but it makes the event much easier to
read).
It is worth noting we do not modify the libdivecomputer value, even if
the gasmix has changed, so that remains as a record of the original
download.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit df4e26c875 ("Start sanitizing gaschange event information")
back about a year and a half ago, I started sanitizing the gas switch
event data, allowing gas switches to be associated with a particular
cylinder index rather than just the gas mix that is switched to.
But that initial step only _allowed_ a gas switch event to be associated
with a particular cylinder, the primary model was still to just specify
the mix.
This finally takes the next step, and *always* associates a gas switch
event with a particular cylinder. Instead of then looking up the
cylinder by trying to match gas mixes at runtime, subsurface now looks
it up when loading the dive initially as part of the dive fixup code.
The switch event still has an a separate gas mix associated with it, but
this patch also starts preparing for entirely relying on the gas mix in
the cylinder itself, by starting to pass in not just the event but also
the dive pointer to the routines that look up gas mix details.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-04-04 22:33:58 -07:00
Renamed from subsurface-core/save-xml.c (Browse further)
