Using xmlParseFile() was simple, but I'm planning on extending the file
parsing past just XML, since we want to be able to import other formats
too. And quite frankly, that means that we'll want to read the file
into memory to look at it before we start parsing it.
We could decide do it by file extensions too, and I'll look at that
approach as well, but regardless of how we do things it's almost
certainly a good idea to do the file access in one place. The XML
parsing might as well happen from a memory buffer instead anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The plain dash may look a bit too much like a trimix specification. Is
the ellipsis better? Maybe.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Support for multiple cylinders and gas change events when Importing
JDiveLog logs to Subsurface. This is tested with manually crafted data
and not real data (originating from dive computer).
NOTE: Subsurface does not handle importing multiple cylinders
correctly but imports only the first cylinder. However, manually
converting data to a file and opening that in Subsurface works
correctly.
(xsltproc jdivelog2subsurface.xslt jdivelog-gas.jlb > gas.xml)
Some minor tweaking on importing JDiveLog specific fields to notes
fields in Subsurface is also included.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'forlinus' of git://git.hohndel.org/subsurface:
Improve Makefile for MacOS
Add reasonable default device names for divecomputer import
More intuitive label for "not saving" when exiting
Some macs appear to need "-framework CoreFoundation" added to the linking
step, others (which appear to have the exact same OS and tools installed),
don't. But as it doesn't appeart to hurt, I unconditionally add this.
Switched to using pkgconfig to find libdivecomputer on the Mac.
Tried to clean up the Makefile a bit
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Acked-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
So far we hard coded /dev/ttyUSB0 - which is a good starting point in
Linux but not so useful on Windows or MacOS. This was now moved into one
of our OS helper functions with (somewhat) reasonable defaults.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Cleanup of the layout
Changed line-length to 74
Added chapter 11. How to find the Device Name
Added Appendix A: Supported divecomputers
Signed-off-by: Jacco van Koll <jacco.van.koll@gmail.com>
Right now the options are "Save" and "Cancel". I wrote that code and it
always bugged me - "Cancel" could mean that I want to cancel the the whole
operation, i.e. that I don't want to quit after all. Showing "Save" and
"No" seems much more logical.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* 'forlinus' of git://git.hohndel.org/subsurface:
Small improvement to plot info debugging code
Add three more trimix test dives
Make test dive 15 a bit more useful
Two test dives I added a couple of months ago
Add libxslt to Windows packaging file
Packing it next to the divemaster/buddy information may work great on a
big screen with lots of pixes, but it makes the minimum window size way
wide for a small screen. So don't do it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If you are diving multiple nitrox cylinders, we now show them as a range
instead of just the max. We'll still sort by max O2 (and for the same
max, by min O2).
So now with trimix dives, we'll show the bottom gas (we assume that
"highest He percentage" is that bottom gas), for nitrox dives we'll show
the range of Oxygen percentage, and for all-air dives we'll show just
"air".
For simple nitrox dives (only a single mix), we'll obviously show just
that single percentage. This should hopefully conclude the whole "show
multiple cylinders in dive list" mess.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. using the regular sorting rules: sort by Helium content first, Oxygen
content second. Air always sorts last (even behind the theoretical
hypoxic Nitrox that nobody sane would use).
This is what Don Kinney implies would be the natural thing for a trimix
diver.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. and use this for the nitrox column, which can now be more complex
than just a single number.
The rule for the "nitrox" column is now:
- we look up the highest Oxygen and Helium mix for the dive
(Note: we look them up independently, so if you have a EAN50 deco
bottle, and a 20% Helium low-oxygen bottle for the deep portion, then
we'll consider the dive to be a "50% Oxygen, 20% Helium" dive, even
though you obviously never used that combination at the same time)
- we sort by Helium first, Oxygen second. So a dive with a 10% Helium
mix is considered to be "stronger" than a 50% Nitrox mix.
- If Helium is non-zero, we show "O2/He", otherwise we show just "O2"
(or "air"). So "21/20" means "21% oxygen, 20% Helium", while "40"
means "Ean 40".
- I got rid of the decimals. We save them, and you can see them in the
dive equipment details, but for the dive list we just use rounded
percentages.
Let's see how many bugs I introduced. I don't actually have any trimix
dives, but I edited a few for (very limited) testing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The divelist airmix display is kind of broken: it only looks at the
first cylinder, and it only looks at Oxygen content, not Helium.
But at least we can make sure to update it when somebody edits the
cylinder information, instead of leaving it extra broken.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is Henrik's list of common metric sized cylinders, although my
experience differs from this one. In Cyprus, I was diving double 12L
cylinders, but they were 200 bar, not the 232 bar ones Henrik has on the
list.
Also, I really think we should just have a checkbox for "double" instead
of naming them explicitly like this. Henrik does have the 12L 200 bar
ones in his singles list.
But as a stop-gap, I'm just taking the values from Henrik's patch, but
converted to the new cleaned-up reference tank model setup.
Based-on-patch-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This makes the reference tanks ("struct tank_info") use a saner format
which specifies explicitly whether the size is in ml or cubic feet, and
whether the pressure is in psi or bar.
So instead of having magic rules ("size is in cuft if < 1000, otherwise
mliter"), just set the size explicitly:
{ "11.1 l", .ml = 11100 },
{ "AL80", .cuft = 80, .psi = 3000 },
and then the code can just convert to standard measurements without any
odd rules, and the initialization table becomes self-explanatory too.
This is in preparation for doing the metric tanks with pressure: Henrik
Aronsen sent a really ugly patch using the previous setup, I just
couldn't stand the additional hackery.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
They were never intended to be sortable, but using common code with the
dive list picked up that "sort by index" thing by mistake.
If we really want to be able to sort cylinders by O2 percentage (which
really doesn't seem to make much sense, considering that you usually
have just one or two cylinders) we will need to also handle the case of
editing the (differently sorted) cylinder table. Which we don't do now.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Henrik Aronsen points out that we've not made it possible to edit the He
percentages for trimix diving. It's easy enough to do, I just didn't
have any dives that needed it myself. So here goes.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Round maximum depth on dive list to get consistent data between the dive
list and dive info.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miika fixed the statistics code that didn't properly check for the "no
cylinder info" case - this cleans it up and just uses the helper
function in equipment.c.
Rename the helper to be slightly better named while at it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
O2 per cent from dive computer should be shown in Dive Info if one is
given even without pressure information for the cylinder.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the whole UI change (three-paned window and different look with new
colors), let's just make a new release, as Dirk points out.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'stars' of git://git.hohndel.org/subsurface:
Fix some issues with star rating code
Add typical 0 to 5 star rating for dives
Still not great editing, but other than that it looks good.
To waste less space in the tree view heading we simply put a star in the
heading instead of "Rating".
We now treat "zero stars" to mean "not rated" and don't store that value
in the XML file.
Rating is no longer a top level tag in the dive entry but instead a
property of the dive tag.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This works ok-ish, but doesn't allow us to click on the stars and edit
them in the divelist, which a user might expect to be able to do - in
most "star rating UIs" you simply click on the n-th star to set that
rating. Here you need to edit the dive and pick the rating from a drop
down menu.
Minor oddity: you can actually (if you force it) write anything you want
into the star rating. But anything that isn't one of the predefined
strings simply results in a zero star rating.
Overall the UI feels a bit... forced. But I think this is quite useful
anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Suggested by Henrik Aronsen, and seems much more natural. Especially
with lots of keyboards having function keys oddly mapped.
Suggested-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently just tied to F1-F4 (for divelist, profile, info, and "all
three" respectively), which is just crazy. But using "ctrl-P" for
"Profile" isn't sane either, that's the standard printer keyboard
shortcut. So what would be good keyboard shortcuts for these things?
I also wonder how I can get gtk to shut up about the fact that a pane
becomes too small for the contents of that pane? We very much want to do
that, and it's very intentional. Gtk does the right thing apart from
the whining (and apart from the visually ugly part of a widget that
doesn't fit, but making it pretty doesn't really seem possible).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix ugly printout, give colors proper names, make grid lines and alert
marker easier to see, and specify printer colors independently.
Signed-Off-By: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
The profile colors were defined all over the place, so I put them all in one spot. I'm unsure if this is the best solution to that problem, but I guess it's a step in the right direction.
Signed-Off-By: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
The profile colors aren't very pretty, and the grid lines are too thick.
This commit tries to improve that.
Signed-Off-By: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
grep for Target doesn't work on non english platforms
-dumpmachine is (hopefully) supposed to always return
the target machine tuple
Signed-off-by: Martin Gysel <me@bearsh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>