There are two cases where dive-times are shifted: in an explicit
dialog and when editing the date/time of a dive.
In each of these cases, the selected dives were collected manually.
Instead use the getDiveSelection() function. Since this returns
a std::vector, change the argument of Command::ShiftTime() to
such a std::vector.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These were used to remove warning-icons to mark tabs with user
changes. However these icons haven't been set since commit
a86aca0378.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was used to test whether the "really discard changes?"
message should be shown. However, we now edit weightsystems
directly with undo commands. Therefore, the check is unnecessary
and the whole function can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When accepting changes, the main tab refreshes the display in
a remember/restoreSelection() pair. Since the display refresh
doesn't lose selection, these calls can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we now have a selection.c translation unit, put the selection-
related functions there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For deterministic construction/destruction (i.e. objects are
destructed in reverse order of construction) it is crucial that
constructor initializer lists follow the order of the class
definition.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Recently, undo of dive-replanning was introduced. Therefore,
it appears logical to do the same thing for editing of the
profile of manually added dives.
For now, use the same undo-command, just change the displayed
text from "replan dive" to "edit profile". Move the fixup dive
call into the undo-command.
Eventually, every action on the profile should be made undoable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the future we might want to use undo-commands for mobile as
well (even if not implementing undo).
Therefore, move the undo-command source from desktop-widgets
to their own commands top-level folder.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently the top righthand part of the notes tab is used for
showing and editing air teperature and water temperature. But
these fields were moved over to the Information tab and are not
required in the Notes tab any more. Rather use this space for the
depth and duration data for manually-entered dives. Currently
extra vertical space is created in the Notes tab for showing this
field, resulting in inefficient use of screen space and
inelegant layout. This code moves the Duration and Depth fields
into the top righthand of the Notes tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
1) Reorganise the existing widgets in the Information tab
2) Move divemode widget and visibility widget from Notes tab to
Information tab
3) Translate water density to a word indicating water type
4) Reorganise the Notes tab to compensate for the moving the
divemode and visibility widgets to the Information tab
5) Remove the problems in showing a QGroupBox in Qt Windows. I do
this by removing the CSS specifying border characteristics
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The ProfileWidget2::recalcCeiling() function is used in one place,
namely when an undo-command changes the mode. It recalculates
decompression data and repaints the ceilings and thus avoids a
full profile-redraw.
This is smart, but it becomes problematic when the dive is changed
and the ceiling is recalculated before the profile is redrawn.
The DivePlotDataModel then still has data from the previous dive
but cylinders of the new dive are accessed.
This kind of situation may arise if multiple dive fields are
updated, as for example when replanning a dive.
Currently, this only causes a temporary mis-calculation. When
removing MAX_CYLINDERS this will lead to crashes.
One might attempt to fix the whole data-dependency mess. This
commit goes the cheap route and simply redraws the profile when
the mode is changed. Yes, it is in a way ineffective, but we
do worse things. The ProfileWidget2::recalcCeiling() thus becomes
unused and is removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The profile repainting code that was called when a dive changed was
located in a separate function. Not only did it take a redundant
parameter, it also performed very weird stuff like entering and
exiting plan state. That did not work at all. Replace by a simple
call to plotDive() and things work much better.
There was a comment about DivePlannerPointsModel and profile
getting out of sync. So let's keep an eye out for that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The divesEdited signal sends the changed field as a parameter.
Since some undo-commands change multiple fields, this led to
numerous signals for a single command. This in turn would lead
to multiple profile-reloads and statistic recalculations.
Therefore, turn the enum into a bitfield. For simplicity,
provide a constructor that takes classical flags and turns
them into the bitfield. This is necessary because C-style
named initialization is only supported on C++20 onward!
Is this somewhat overengineered? Yes, maybe.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To recognize HTML-notes the text was scanned for <div> tags. But
apparently the planner notes do not feature such a thing. Therefore
extend recognition of HTML to <table> tags.
Note we can't use the <html> or <span> tags, because these are
*always* produced by the QTextEdit::toHtml() function.
Fixes#2265
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replaces some enums with names that do not clash with windows #defines.
Specifically:
ERROR -> ERRORED, PASCAL->PASCALS, IGNORE->IGNORED,FLOAT->FLOATVAL
Signed-off-by: Paul Buxton <paulbuxton.mail@googlemail.com>
Move the declarations of the "report_error()" and "set_error_cb()"
functions and the "verbose" variable to errorhelper.h.
Thus, error-reporting translation units don't have to import the
big dive.h header file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the main tab, the trip time was not shown when switching to
a trip. Implement showing of the trip date in a function, as the
undo-code will also have to update the trip date in certain
circumstances.
Fixes#2207
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The weightsystem_equal() function compares weightsystems of two dives
to decide whether the "commit changes" message should be shown and
to decide which dives are edited when changing multiple dives.
Due to an index mixup the function returned wrong results for
more than two weightsystems. Fix it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the fixed-size weightsystem table by a dynamically
relocated table. Reuse the table-macros used in other parts
of the code.
The table stores weightsystem entries, not pointers to
weightsystems. Thus, ownership of the description string is
taken when adding a weightsystem. An extra function adds
a cloned weightsystem at the end of the table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
per_cylinder_mean_depth() and selected_dives_gas_parts() are used
in the dive-information and statistics tab, respectively. Nevertheless,
these functions are called on the main tab as well and the result is
trashed. Therefore remove the calls. Must have been an artifact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If no dive is set, all fields except the note field were cleared.
Also clear notes.
Fixes#2172
Reported-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Clearing dive site did not work for two reasons:
1) We didn't get a signal when editing was finished.
2) When clearing the dive site, the "add new dive site" site was set.
Thus, connect to the editingFinished signal and in
DiveLocationLineEdit::currDiveSite() return a null pointer if
the string is empty.
This means that it is not possible to have a dive site with an
empty string, but that shouldn't be a problem, right?
Fixes#2148
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We were shifting in the wrong direction. Which caused the field to be marked as
'edited' again, which meant we shifted the wrong way and twice the distance.
This seems to fix the problem for both date and time editing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the default view is batched by trips, signals were sent trip-wise.
This seemed like a good idea at first, but when more and more parts used
these signals, it became a burden. Therefore push the batching to the
part of the code where it is needed: the trip view.
The divesAdded and divesDeleted are not yet converted, because these
are combined with trip addition/deletion. This should also be detangled,
but not now.
Since the dive-lists were sorted in the processByTrip function, the
dive-list model now does its own sorting. This will have to be
audited.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions were spread out over dive.c and divelist.c.
Move them into their own file to make all this a bit less monolithic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When a different field is edited, hide any old multi-dive-edit
warning message. The reason is that we might want to add an "undo"
button to the message. But this will undo the wrong command if
we don't hide the message.
Sadly, this means that we can't use animated show / hide, because
an animatedHide() followed immediately by an animatedShow() does
not necessarily show the message. In other words, and animatedShow()
does not interupt a started animatedHide()!?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the MainTab, warn if more than one dive was edited. To this purpose,
add a new KMessageWidget with an "OK" button that closes the message.
Code is mostly a copy of the already existing "Editing dive" message.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is a pointless one-liner function. Let's remove it. The
message it shows will probably be moved to the profile in the
not-so-distant future anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When tabbing through the dive-info fields we get *EditingFinished
signals. This would create undo commands. The undo commands should
recognize if nothing changed. But for the temperature fields,
owing to rounding, an unchanged text could actually represent a
different value.
This would lead to very confusing situations:
1) Edit air temperature
2) Press tab to finish editing
3) Focus goes to water temperature
4) Try to undo change in menu
5) When opening the menu water temperature loses focus
6) Water temperature is edited
7) Undo undos the water temperature, not the air temperature
8) Goto 4
Fortunately, QLineEdit fields have the isModified() member function
that returns true if the field was changed by the user. Use
this to prevent this case. This is not a general method, i.e.
it has to applied to every field with that problem. But it is
less intrusive than subclassing the QLineEdit class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The location fields are hidden in trip mode. Only the location-popup
button was shown. Hide it as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the main dive tab, add a button that opens the dive-site selection
widget showing all dive sites. This is done by setting the "temporary
dive site name" to the empty string. Thus no dive sites are filtered
and the "add new dive site" entries are not shown. Moreover, the
text is selected. The user can therefore immediately start typing to
activate the filter or enter the name of a new dive site.
The idea is that after downloading dives with GPS information the
user can select one of the close dive sites.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When presenting the list of dive sites on the dive-info tab, sort
the dive sites by distance to the current dive. The idea is that
when the user wants to select a dive site, close dive sites should
be prioritized.
The location of the dive is determined with the dive_get_gps_location()
function introduced in the previous commit. This actual GPS data get
precedence over the currently set dive site for that dive.
On change of dive, the current location is updated in the
DiveLocationFilterProxyModel so that a potentially expensive search
for GPS data is not repeated for every comparison.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When changing the dive selection, we have to reload the map to show
the correctly highlighted flags. Do this directly by hooking into
the DiveListNotifier::divesChanged signal instead of indirectly
via the MainTab.
Moreover, on reload center on the highlighted dive sites.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
An interesting crash:
1) On the dive site tab select a dive site such that only one
trip is shown.
2) Unselect all dives.
3) Press CTRL-A while the dive list has focus.
4) This will select a trip.
5) In MainTab::updateDiveInfo() this will switch to the previous
tab active when in trip mode.
6) This will reset the filter.
7) This will reset the currentTrip field which we just set.
8) Since we just set the currentTrip field, we don't expect
it to change and reference a null pointer.
To fix, don't switch tabs when on the dive site tab. This also
improves user experience as there seems to be no reason to switch
away from the dive site tab.
Currently the index of the dive site tab is hard-coded - this
should be changed!
Fixes#2077
Reported-by: Doug Junkins <junkins@foghead.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On the main-tab, when looking at a trip, the fields were filled
out with dive-data and then either hidden or overwritten with
trip data. Move the update of the fields into the corresponding
if-branch that is only active if on dive-mode.
This means removing the UPDATE_* macros, which updated or cleared
dive-fields depending on whether a current dive was set. These
operations are now performed explicitly in the corresponding
if-branches.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This struct is used to store the completers during construction
of the object. But it is never accessed afterwards. Therefore,
remove it from the object and remove the structure definition
from the header file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Most tabs in the dive-information widget have there own translation
units and ui-files. Only the equipment tab was married with the
main tab. Move it out to get more reasonably sized translation units
and some isolation.
Currently, this needs ugly hacks when entering / checking for edit
mode: Access to MainTab is via the MainWindow. And vice/versa, when
accessing the DiveEquipmentTab from the MainTab, the former is
hardcoded as the first item of an array.
These hacks will soon be removed though, when making equipment
editing undoable. The tabs will then be independent.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only caller of said function used to check whether MainTab is
in edit mode. For this case there is already a function - use that
instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive tabs are disabled, when no dive is shown. The dive site tab
is implemented as a dive tab, which is of course conceptually wrong.
Moreover it has the nasty side effect that when adding an empty dive
site, no dives are shown and the tab is disabled, leading to a
UI dead lock.
Therefore, disable all tabs but the dive site tab. The proper fix
will be a refactoring of the UI.
Reported-by: Doug Junkins <junkins@foghead.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Editing the dive site of a dive may make a dive site appear
(first dive of that site) or disappear (the last dive of that
site was removed). Therefore, we have to reload the dive site
markers on editing the site of a dive.
This should be made smarter by only reloading the markers if
the dive site status actually changed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
