Usually ldconfig isn't in the user's path.
Suggested-by: Cristian Ionescu-Idbohrn <cristian.ionescu-idbohrn@axis.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Usually people will install these via Homebrew, but when we need to build
everything ourselves (required for release binaries), then these two were
missing before.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add option "-src-dir <source directory>" to build options.
When calling build.sh without -src-dir it uses src/subsurface as usual, but when called
with -src-dir <source directory>, it uses src/<source directory> as source basis.
This is a needed option, when working with "git worktree", which is used when working on
different branches in parallel (e.g. master and my-feature-branch), because it allows a
build directory in each worktree, and thus much faster when switching work.
Signed-off-by: jan Iversen <jan@casacondor.com>
This actually changes behavior compared to what we did before. But it seems
reasonabel. If ./subsurface is a link to a different directory, then assume
that we want a true out of tree build in the current directory.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This attempts to allow sharing a host directory across multiple builds, target
use case is to have a shared source directory on a VM host and be able to build
from that in a number of VMs without those builds stepping on top of each
other.
Instead of subsurface/build, subsurface/mobile-build,
subsurface/libdivecomputer/build, use a prefix path to allow having true out of
tree builds.
The one shortcoming is that the autotools need to be run in the libdivecomputer
directory - that means this will be run on the first system that starts a
build. But that seems to cause no harm in my testing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
libssh2 depends on openssl, therefore it is important that openssl is
build before libssh2.
The old get-deps would cause errors in 2 situations:
1) In a clean build, make of libssh2 would fail
2) In a normal build, where openssl changed version, make of libssh2 would
depend on old build.
Signed-off-by: Jan Iversen <jan@casacondor.com>
This feature is in beta right now and might change without notice, but instead
of dealing with the broken Travis Mac builds, this does seem progress.
The build artifact seems to work, but it's a bit more painful to get to. Go to
https://github.com/Subsurface-divelog/subsurface/actions and click on the
corresponding run - it's then in the top right corner under Artifacts. The one
oddity is that after unzipping the file you need to manually make
Contents/MacOS/Subsurface executable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We currently require a minimal version of libgit2 of 0.24.0. From
issue #1926 it seems that this version is too old. So, a simple test on
Linux to see the behaviour with such an old libgit2, I tried that.
Interestingly, with the current version of openssl that old libgit2
version does not even compile from source (known error in libgit2).
So, bump our minimal version of libgit2 to 0.26.0. That is also the
version we currently use on the Travis and official builds, so well
tested.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The scripts/build.sh script has an option --skip-googlemaps. Introduced
in 2017 at a moment the Travis Mac build failed on this. Interestingly,
when Mac building of the maps plugin was possible again (commit 79e3f69f48)
the --skip-googlemaps stayed. Obviously, this hack was never intended
to be used for anything else then getting it passed Travis on
some point in time for a specific Mac build.
So, remove this option.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Starting with Xcode 10, system headers are located inside the
macOS SDK.
Add this location to the check for command line tools.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
That qmake -query was added for debugging a long time ago.
Since the comment clearly indicate that the edit of the Makefile is only
for Travis, let's only do it when running on Travis.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It wasn't documented in the first place (magic first argument, anyone?).
This used to be available for quite a few of the dependency and had
somehow kept around only for Grantlee and Googlemaps. Let's just kill
this and be consistent for all dependencies.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In some Mac environments autotools somehow think that we have clock_gettime(),
even though it isn't supported. Somehow the previous workaround stopped working
as make ended up re-running ../configure and overwriting our change. This tries
to work around that problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This also switches us to libzip's new official home on GitHub, and takes into
account that libzip no longer supports autotools and instead now is cmake
based.
Building against that, on my Mac build system, Subsurface once again correctly
opens DLD files downloaded from divelogs.de.
Fixes#1534
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Doing that confuses the build setup and as a result the library isn't found at
runtime without some fixups.
Fixes#1469
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When building with -builddeps on a "virgin" mac, configure
of libgit2 could not find libcurl and libssh2
moved building of libcurl and libssh2 in front of libgit2
Signed-off-by: Jan Iversen <jani@apache.org>
Specifically, don't conflate needing libgit2 with the Mac -builddep
argument, and when determining if we need to build libgit2 on Linux,
make sure to also check for a version that we may have built in a
previous run of the build.sh script.
This commit is much easier to understand with
git show -w
as it contains quite a bit of simple indentation change.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
get-dep-lib has been integrated into build.sh, which
ensures different platforms use the same versions etc.
travis is a frequent user of build.sh, but on a mac it runs
without -build-deps and instead used cached versions of the
library. This setup is alo supported
Signed-off-by: Jan Iversen <jani@apache.org>
For reasons I cannot explain, running configure for libdivecomputer claims that
certain feature tests pass, even though those features demonstrably aren't
there. This is happening for two compiler warning flags (-Wrestrict &
-Wno-unused-but-set-variable) as well as the test for clock_gettime.
To work around this, we manually edit the config.h file and the created
Makefile before building libdivecomputer.
This happened on macOS 10.11.6 with clang-800.0.42.1 (part of Xcode 8.2.1).
Tangentially related to:
See #1263
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
...to explain the difference between building the mobile
version to run on desktop and crossbuild for a mobile OS.
This should address #1247
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Trivial fix. Do not first cd to the ./src/subsurface directory, and then prepend
the subsurface directory to the path.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This adds a -skip-googlemaps option to the build script since for some
reason trying to build the googlemaps plugin in the Travis mac
environment causes an error with a missing stack-protector-strong
feature.
The build relies on a custom build Qt and a cached homebrew environment.
And the result is of course not a DMG with a signed app but a zip file
with an unsigned app - so it's a bit harder to consume.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had not done this on Linux as it was just as easy to run from the build
environment, but we need to install in order to be able to create an AppImage
on Travis.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
