Do reply->readAll() before reply-deleteLater()
With UI deleteLater() seems to happen after the function exist,
but with QML it causes problems.
Signed-off-by: Jan Iversen <jan@casacondor.com>
When using Connect, the context is switched, so close()
might or might not work.
Change unqualified close() to qualified uploadDialog.close()
Signed-off-by: Jan Iversen <jan@casacondor.com>
This actually changes behavior compared to what we did before. But it seems
reasonabel. If ./subsurface is a link to a different directory, then assume
that we want a true out of tree build in the current directory.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This attempts to allow sharing a host directory across multiple builds, target
use case is to have a shared source directory on a VM host and be able to build
from that in a number of VMs without those builds stepping on top of each
other.
Instead of subsurface/build, subsurface/mobile-build,
subsurface/libdivecomputer/build, use a prefix path to allow having true out of
tree builds.
The one shortcoming is that the autotools need to be run in the libdivecomputer
directory - that means this will be run on the first system that starts a
build. But that seems to cause no harm in my testing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use doUpload() from uploadDiveLogsDE
Connect signals from uploadDiveLogsDE to do UI part.
Clean slots to only contain UI.
Signed-off-by: Jan Iversen <jan@casacondor.com>
The uploadStatus signal can be used to inform the user about
the process e.g.
- preparing zip file
- starting actual upload
It is a suplement to uploadProgress, that only informs about
the network part.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Do not prepare zip file, just because user selected the divelogs.de
radiobutton
Move prepareDives to startUpload (slot handling user clicking on
upload button).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Clean prepareDivesForUpload() and uploadDives() so that
uploadDives() only contain network handling no UI.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Secure that the slots/signals in uploadDiveLogsDE, which are without
UI, can be used in DivelogsDeWebServices (to add the UI part).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Use qPrefCloudStorage for divelogde_user/password to secure same
handling as other settings, as well as same handling as used in
shared uploadDiveLogsDE class
Signed-off-by: Jan Iversen <jan@casacondor.com>
The difference between slot names and signal names was to insignificant
e.g. uploadFinish (signal) uploadFinished (slot).
Change slot names to slot_<name> should clear any confusion.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Remove local implementation (prepare_dives_for_divelog) and call
uploadDiveLogsDE::prepareDives, which are shared between
mobile and desktop
Signed-off-by: Jan Iversen <jan@casacondor.com>
prepareDives needs to be public, in order to be used in
subsurfacewebservices.
"friend" is another option, but that gives subsurfacewebservices
too much freedom.
Signed-off-by: Jan Iversen <jan@casacondor.com>
In order to replace DivelogsDeWebServices::prepare_dives_for_divelogs with
uploadDiveLogsDE::prepareDives, first step is to make the functions identical.
amount_selected is not maintained for mobile, add #ifdef SUBSURFACE_MOBILE
Add comment, to make code more readable
add white line to make code more readable
change to use variable ds (created a couple of lines earlier
Avoid "goto" by adding close code
Remove label and close code (it was only called in 1 place)
Signed-off-by: Jan Iversen <jan@casacondor.com>
use report_error directly, instead of making a QString first,
argument syntax are different (%s vs. %1)
Signed-off-by: Jan Iversen <jan@casacondor.com>
Handle reading/writing of userid/password settings in the
saveAsDialog and set field to visible when needed.
Activate divelogsde radio button
Signed-off-by: Jan Iversen <jan@casacondor.com>
The implementation is based on class DivelogsDeWebServices in
desktop-widgets but without the UI entanglement
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add divelogsde_userid and divelogsde_password to
qPrefCloudStorage to be used in Export.qml
Extending qPrefCloudStorage is more logical than adding QSettings
(and securing the same behaviour) outside qPref.
Signed-off-by: Jan Iversen <jan@casacondor.com>
diveshareexport wants to show the HTML received
in a positive response, so signal cannot be
compatible with diveLogsDE
Signed-off-by: Jan Iversen <jan@casacondor.com>
Remove shared code from DiveShareExportDialog::doUpload()
and add call to uploadDiveShare::doUpload()
Remark signal handling is not implemented.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add DiveShareExportDialog::do_upload() to
uploadDiveShare::do_upload(), while cleaning it from
UI.
Add signal connections as used in uploadDiveLogsDE
Signed-off-by: Jan Iversen <jan@casacondor.com>
Diveshare upload in mobile is using qPrefCloudStorage, so change
diveshareexportdialog as well, to keep consistency.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Add diveshare/uid and diveshare/private to qPrefCloudStorage
to be used in Export.qml as well as diveshareexportdialog
Extending qPrefCloudStorage is more logical than adding QSettings
(and securing the same behaviour) outside qPref.
Signed-off-by: Jan Iversen <jan@casacondor.com>
This is the framework that mobileExecutable needs, all
prepared to move functionality from desktop-widgets
(current implementation) into a shared version.
Signed-off-by: Jan Iversen <jan@casacondor.com>
On desktop, resetting the model is realized by generating a new
model object. This is due to the fact that we have two different
models (tree and list) and for switching between those, we have
to create a new object.
On mobile, currently there are no plans to support the list-mode.
Therefore, there is no reason the recreate the object. Instead,
implement a reset() function that reloads the core data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveTripModelList forgot to collect the changed dives
when resetting the filter. Fix that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Updating the filter can lead to changes of the current dive.
Keep the UI in the know by re-initializing the selection.
This is not optimal, because the whole selection is reset,
but the pragmatic thing to do for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This part of the code had that horrible pattern, where reseting
the model would invalidate all pointers to the DiveTrip model.
Internalize these complexities in the MultiFilterSortModel.
All accesses are now performed via that proxy model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dive list accesses the filter model, therefore it makes sense
to also get the header data from there, even if they are only
forwarded from the source model.
This makes control flow more logical and will allow us to remove
the global DiveTripModel instance.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The UI talks to the filter model. Therefore route clearing of
data through that model instead of accessing the source model
directly.
This will allow us to remove the DiveTripModel::instance()
function and makes control flow less "jumpy".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
