This is my first attempt at grouping UI elements of the planner in a
sensible way.
It might still be sensible to combine the two bottom panes into one.
In addition there is a new field "altutude" which is sychronized with the
surface pressure as for planning we often know the altitude of the dive
site rather than the atmospheric pressure.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Most of my dives i plan i know it will just be full speed down a line in
the beginning and thus the planner can figure out that leg of the plan
by it self.
The config box added here isn't connected, because i saw that the other
planner boxes wasn't connected ether, so i left it in the same state as
they where.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QSpinBox is nice to see how different sac rate would affect our dive
plan.
"Hey, What would happen if I would be stressed and my sac goes up by 50%?"
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Robert's commit 708f19830e ("Planner: New plannerSettingsWidget")
moved several of the widgets from the maintab area to the new planner
settings widget.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In planner mode, this replaces the globe with the dive plan and introduces
a new plannerSettingsWidget in the diveListPane. All new fields are still
disfunctional. This is WIP.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are new check-boxes to modify the look of the diveplan in the notes.
The old behaviour appears with "verbatim display", others are shorter,
runtimes, stoplengths and transitions being optional. Also round to full
meters and minutes to remove optical clutter.
To be done: Remember these setting in the config.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rewrite of the actual planner logic. Now ascend to the next potential stop
depth. There the state is cached and we try to ascend to the next stop
depth. If we hit the ceiling while doing that we go back to the cached
state and wait there for a minute. Then we try again. Then loop.
Converted all depth related variables from unsigned int to int. During
planning, in a time step the current depth can temporarily be negative and
comparisons of a negative int with an unsigned it have not the result I
expected ( (int) -2 < (unsigned int) 3 turns out to be false). And we
don’t really need the 32nd bit that unsigned buys us for depths.
Deco stops are now shown in the same table as manually entered stops in
boldface (I removed the second table to save screen estate).
The gas shown in the table is still misleading as it means the gas used on
the segment leading up to that event.
The update of the profile only works partially upon changes in the list of
available gases.
Treatment of various gases is basically there but needs some more love.
The ascent velocity is now provided by a function that takes the current
depth as argument. Currently it always returns 10m/min but that will later
be variable (and hopefully user configurable).
The profile is not redrawn while deco is computed (avoiding an infinite
recursion).
The table got a new column for the duration of a segment while the old
“duration” column was renamed “Runtime” to reflect what it actually shows.
Currently, only the run time but not the duration are editable.
All deco gases are used from the depth where their pO2 is 1.4bar. This
should become more flexible.
Calculation of the pressure drop in cylinders without configured volumes
is suppressed. This solves a problem with the planner crashing when saving
a dive where not all cylinders had been manually given a volume.
[Short rant break: Treating 0/0 as air bites back at so many places. E.g.
Cylinder data is initialized with memsetting the whole structures to 0.
Then later suddenly this totally unconfigured cylinder is being treated as
it would contain air. Maybe at some point this was a feature. But it lead
to a naughty bug which took me over an hour to resolve. We should
seriously reconsider this choice and better move to 209/0 being air if
changing this everywhere is not too much trouble]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Recently Robert Helling provided a patch "Distinguish between entered and
calculated waypoints" in an attempt to distinguish between entered and
calculated stops.
This patch is an independent (content wise) extension of the above
patch and is built relative to it which adds new table to display
computed waypoints in plan mode.
Currently table includes only two columns "Comp. Depth" and "Comp.
Duration", which can extended to show further information.
This is only a start to the UI interaction in PLAN mode.
In addition to this there are many TODO things that diveplan feature
demands
TODO:
1. Show more details through "Computed Waypoints" table.
2. Remove tooltip from "Computed Waypoints" table widget.
3. Make contents in "Computed Waypoints" table widget non-editable.
4. Fix error when trying to save dive plan without using cylinder data.
5. Make dive plan editable after saving it.
6. Improvise dive planner graphics window.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sets the limit for GF's in the preferences panel to 1<=x<=150 and color
it read if gf > 100. Remove the % in the diveplanner view that was
rejected for the preferences view.
The 150 maximum is needed because QSpinBox defaults to maximum 99.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When moving the horisontal splitter the cylinder and time/depth boxes
didn't scale down but got "stuck" on a certain height. This makes them
scale down when pulling the horisontal splitter up.
I would prefer if we could scale them individually, but i didn't manage
to get that going, but i didn't manage to get that going.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Switch to using a QSpinBox instead of a QLineEdit. This makes it a bit
more intuitive and now you can see how the deco plan changes based on
the GF's.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last commit correctly setted the minimumSize, but
I forgot to set the maximum size, and thus, it still
expanded. sigh.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the Air Types widget on the planner smaller,
since on most dives users will only enter 1 to 2 dives, it's
not good to have so much whitespace. this makes it smaller for
small screens, and it will grow on bigger screens where space
is not an issue.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is intended to allow the user to provide the gases / cylinders that
she will be diving with. With that information the planner can warn the
user about insufficient gases, but more importantly it can show relevant
gases in the gas select drop down.
Right now the add cylinder button doesn't add a cylinder - that's a
problem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the display of subsurface in smaller
screens by creating ScrollArea containers that are
now englobbing each of the Tab-pages and the Planner
Widget. Some of those widgets were pretty big by the
amount of things on it and it was too big for small
( 14" and 15" ) screens.
This seems to fix it, and looks good both on Gtk+ and
Oxygen styles.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Merged the shared code for the three table views into
one code, this way less code is needed if we need to
construct another tableview in the future.
I still need to clean some of the models too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a new widget to control the DivePlanner, now we
have two widgets, a graphics one and a qt sidget based one.
the Technical divers will most likely use the QtWidget one
while the hobbists will most likely use the QGraphicsView
one. there's not a option to choose one, they both will
appear at the same time.
Next step: make the screens to work.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Added a new class named DivePlanner that is a QDialog,
and renamed the old DivePlanner class to DivePlannerGraphics.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
