This code had parts that where Qt5-compatible, this introduces the last
bits that it needs to be completely compatible.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Ubuntu and in the source package, libxml2 defaults to naming its
pkg-config file to libxml-2.0.pc so query after the package with that
name to.
I don't know what platform ships it as libxml2, so that might be a typo.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
libxslt depends on libxml, so we need xslt before xml on the linker-line.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Recreate the labels in the marble window (this adds all the new locations
with the correct labels), center on the selected dive (this makes sense in
case this is one of the dives that got location information) and redisplay
the main tab (again, as this might now have location information).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- make the User ID input field wide enough
- use the progress bar for an explanatory text
- mark it as 100% completed once the download succeeds
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch enables main window full screen mode by menu toggle or pressing
F11.
[Dirk Hohndel: whitespace cleanup]
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Pre-configured imports in Import Dive Log File for CSV files should also
be cleared when the field separator is changed by the user.
Promoted DiveLogImportDialog::unknownImports to slot as per Canabrava's
suggestion and Hohndel's request.
Signed-off-by: Rodrigo Severo <rodrigo@fabricadeideias.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Pre-configured imports in Import Dive Log File for CSV files should also
set the pre-defined field separator.
[Dirk Hohndel: cleaned up hideous whitespace]
Signed-off-by:Rodrigo Severo <rodrigo@fabricadeideias.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As discussed with Mika this changes the ISO 6709 detection to use:
1st non-whitespace character is a digit and
number of commas is even.
The idea is that, as all the other formats seperate the lat from
long with a single comma, additional even numbers of commas could
ocour in locales where comma is used as a decimal point, but in
total an even number of commas (often 0) would indicate an ISO
format entry.
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
ISO 6709 format dictates that the format includes characters ° (degree),
' and ". If we only test for the coordinates starting with decimal, we
match also the decimal notation on this test. Thus adding test for the
degree sign not to match input as ISO 6709 when coordinates are given in
decimal notation.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some dive computers will always download all tanks that they store, not
just the ones used in a dive. Most people only want to see the tanks that
they actually used during the dive (and for the others there's an option
to go back to the old behavior, just in case).
All this is only in memory / during runtime. If the dive computer provided
the extra data we will not throw it away.
Fixes#373
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If buffer copying is restricted by the buffer size in strncpy or
snprintf, the copied string is not NULL terminated. Add one to the end
just to make sure.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user asks to merge dives in the divelist, we would always use
the "try tp find matching dive computers and merge at an offset" model.
That is incorrect if the intent is to actually merge two *identical*
dives (with different dive computers), as opposed to merging two short
dives into one longer one with a surface interval.
Normally this doesn't ever trigger (the "same dive" merging will have
been done automatically after downloading from the dive computer), but
if the dive computer times are off, and the user fixes them, and then
asks to merge dives, we should use the non-offset dive merging logic.
We already have that "likely_same_dive()" function that is used to
determine when downloaded dives get merged, so just use it for the user
merge case too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Bring in the tag, the translations changes and edits preparing for 4.0.2
into master. This should make "git describe" on master create something
reasonably sensible...
If we do not have temperature readings, we do not want to plot the
temperature samples either.
See #415
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make search panel floating so that web view does not resize.
This commit also addresses following issues:
- search now wraps around document
- application icon and window title are now back
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The shortcut may be used elsewhere, e.g. in user manual
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now never remove units or percentage signs, and always just compare
the string data, so we should remove the hacky arguments that are no
longer used.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This matches the pattern of unit conversion, and will allow us to remove
all the code that uses the old complex "CHANGED()" macro that tries to
remove units or percent signs.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Whittling down on the string parsing that doesn't check user-specified
units. Still need to handle temperatures (and will do percentages to
match the pattern too), but this is getting us closer to always honoring
user-specified units.
With this you can say that you have a "10l" cylinder at "3000psi", and
it will do the right thing (it's basically a 72 cuft cylinder in
imperial measurements).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now never remove units or percentage signs, and always just compare
the string data, so we should remove the hacky arguments that are no
longer used.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This matches the pattern of unit conversion, and will allow us to remove
all the code that uses the old complex "CHANGED()" macro that tries to
remove units or percent signs.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Whittling down on the string parsing that doesn't check user-specified
units. Still need to handle temperatures (and will do percentages to
match the pattern too), but this is getting us closer to always honoring
user-specified units.
With this you can say that you have a "10l" cylinder at "3000psi", and
it will do the right thing (it's basically a 72 cuft cylinder in
imperial measurements).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just adds (and uses) a string_to_pressure() to parse pressure units
correctly when filling in cylinder pressures.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If no average depth is known the current fake profile behavior is rather
unintuitive (we make up an average depth).
Instead we should assume that this is a PADI style dive log and give the
user a "rectangular" profile (actually, it's a trapecoid as we at least
try to enforce a sane ascent / descent speed). If the dive is somewhat
longer or deeper (10 min / 10 m) we even add a 3m safety stop at 5m.
Added a new dives/test0b that tries to capture the typical cases to test
this.
Fixes#398
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's currently only used for the setting of the cylinder switching
depth, but now that one should work with user-specified units (so you
can set a max depth in feet even if you use metric, and vice versa).
In the future, if we also make the unit preferences something you can
pass in (with user preferences as a default argument value), we might
want to use this for parsing the XML too, so that we'd honor explicit
units in the XML strings. But the XML input unit preferences are not
necessarily at all the same as the user preferences, so that does
require us to extend the conversion functions to do possibly explicit
unit preference selection.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The C library doesn't use const char pointers for legacy reasons (and
because you *can* modify the string the end pointer points to), but
let's do it in our internal implementation just because it's a nice
guarantee to have.
We actually used to have a non-const end pointer and replace a decimal
comma with a decimal dot, but that was because we didn't have the fancy
"allow commas" flags. So by using our own strtod_flags() function, we
can now keep all the strings we parse read-only rather than modify them
as we parse them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make it use 'weight_t' and hide the "grams" part inside the type. That
was the whole point of the weight_t type, after all. Returning a
"double" was always bogus, since we internally always do integer grams
(and the function actually used "rint()" to get all the rounding right
anyway).
As a result, it's now called "string_to_weight()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some devices, the event data contains important data that is
required for parsing the dives, but which is not present in the full
memory dump.
Signed-off-by: Jef Driesen <jefdriesen@telenet.be>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the 'logfile_name' and 'dumpfile_name' were NULL we can simply
strdup() them with a new value, but if there was a previous value
we need to free() first.
C99 6.7.8 allows us to keep said variables without the
explicit NULL initialiazation.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
C99 7.1.4, says nothing about passing NULL to fopen(),
which means that it isn't portable and there are no guaranties
that the return will be a NULL pointer or that that a library
implementation will not assert or SYSSEGV in the middle of the
fopen() branch.
libdivecomputer.c's 'dumpfile_name' and 'logfile_name' could
cause problems in that regard.
A possible fix for #411
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Win32 subsurface_fopen() can reach an assert in windows.c:
utf8_to_utf16(), if NULL is passed for 'path'.
Let's return NULL/-1 for some of the *open() functions in there.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Restoring the selection was not setting the selected dive as current, and
thus, breaking keyboard navigation.
Fixes#402
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
