Commit graph

713 commits

Author SHA1 Message Date
Linus Torvalds
adb4b66a05 Try to sanely download multiple concurrent cylinder pressures
This tries to sanely handle the case of a dive computer reporting
multiple cylinder pressures concurrently.

NOTE! There are various "interesting" situations that this whole issue
brings up:

 - some dive computers may report more cylinder pressures than we have
   slots for.

   Currently we will drop such pressures on the floor if they come for
   the same sample, but if they end up being spread across multiple
   samples we will end up re-using the slots with different sensor
   indexes.

   That kind of slot re-use may or may not end up confusing other
   subsurface logic - for example, make things believe there was a
   cylidner change event.

 - some dive computers might send only one sample at a time, but switch
   *which* sample they send on a gas switch event.  If they also report
   the correct sensor number, we'll now start reporting that pressure in
   the second slot.

   This should all be fine, and is the RightThing(tm) to do, but is
   different from what we used to do when we only ever used a single
   slot.

 - When people actually use multiple sensors, our old save format will
   start to need fixing.  Right now our save format comes from the CCR
   model where the second sensor was always the Oxygen sensor.

   We save that pressure fine (except we save it as "o2pressure" - just
   an odd historical naming artifact), but we do *not* save the actual
   sensor index, because in our traditional format that was always
   implicit in the data ("it's the oxygen cylinder").

so while this code hopefully makes our libdivecomputer download do the
right thing, there *will* be further fallout from having multiple
cylinder pressure sensors.  We're not done yet.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-25 06:11:10 -07:00
Miika Turkia
1fe22a28ed CCR is now detected from the log data
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2017-07-24 13:08:04 +09:00
Miika Turkia
685c59214d Map Divinglog's visibility to our stars
good (1) = 5
medium (2) = 3
bad (3) = 1

There seems also to be 0 used in the log, even though it is not
mentioned in the valid selections. This is not giving any stars for this
option...

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2017-07-24 13:08:04 +09:00
Miika Turkia
a7231be9a0 Detect CCR/PSCR from Divinglog import
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2017-07-24 13:08:04 +09:00
Miika Turkia
0e9e1b6043 Fix CCR detection on Divinglog import
Note that I have not been able to do a positive test for this due to
lack of CCR sample data. But at least OC dives are now categorized
correctly.

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2017-07-24 10:03:07 +09:00
Miika Turkia
27bb76e834 Add visibility support to Divinglog import
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2017-07-24 10:03:07 +09:00
Dirk Hohndel
587882c88b QML UI: remember the last dive computer
We already have the infrastructure to do so, all we needed to
do was hook it all up.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-22 16:15:00 -07:00
Linus Torvalds
92ecbc8c83 parse-xml: use the right dc for filling in extra data
"cur_dc" may be NULL when the XML source isn't a subsurface XML file,
and xml parsing is supposed to use "get_dc()" to pick a dive computer
when the nesting of the XML may not be proper.

Now, XML sources that don't have the proper dive computer nesting
markers generally also do not end up having the extra-data string
information, but one example of this is the simple XML that the
libdivecomputer 'dctool' program generates.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-22 10:38:11 -07:00
Linus Torvalds
b9f52d0aff Gas usage statistics: don't require gas switch events
Our "get_has_used()" helper only filled in gas usage for cylinders that
had a gas change event associated with them.  That works really badly
for things like CCR, but also simply for cases where the dive computer
wasn't necessarily explicitly notified about usage, like sidemount
diving etc.

Just remove the logic.  If some use ends up particularly wanting to
ignore some cylinder, they can always do it in the caller instead.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-22 10:38:00 -07:00
Linus Torvalds
f2a6a76b3e Fix up o2 pressure sensor handling at load time
Because of how we traditionally did things, the "o2pressure" parsing
depends on implicitly setting the sensor index to the last cylinder that
was marked as being used for oxygen.

We also always defaulted the primary sensor (which is used for the
diluent tank for CCR) to cylinder 0, but that doesn't work when the
oxygen tank is cylinder 0.

This gets that right at file loading time, and unifies the xml and git
sample parsing to make them match. The new defaults are:

 - unless anything else is explicitly specified, the primary sensor is
   associated with the first tank, and the secondary sensor is
   associated with the second tank

 - if we're a CCR dive, and have an explicit oxygen tank, we associate
   the secondary sensor with that oxygen cylinder.  The primary sensor
   will be switched over to the second cylinder if the oxygen cylinder
   is the first one.

   This may sound backwards, but matches our traditional behavior where
   the O2 pressure was the secondary pressure.

This is definitely not pretty, but it gets our historical files working
right, and is at least reasonably sensible.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-21 16:34:33 -07:00
Linus Torvalds
ea31800f61 git save format: don't save redundant sample information
When we load sample data from a git save-file, we always default to
using the state from the previous sample (except for the special case of
cylinder pressure where an empty value does not mean "same", but
"interpolate", see core/load-git.c: new_sample()).

But the corollary to that is that it's always redundant to save sample
data that hasn't changed since the previous sample.

For some reason, the rbt, bearing and heartrate sample data didn't
follow that rule, and instead saved with lots of extra reduncancy.

(The alternative would be to clear those samples at load time, and make
them act like the pressure data, but it would appear that all these
three values may as well just have the normal "if no change, don't save
them" semantics).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-21 16:33:45 -07:00
Linus Torvalds
1e38d9239a Start cleaning up sensor indexing for multiple sensors
This is a very timid start at making us actually use multiple sensors
without the magical special case for just CCR oxygen tracking.

It mainly does:

 - turn the "sample->sensor" index into an array of two indexes, to
   match the pressures themselves.

 - get rid of dive->{oxygen_cylinder_index,diluent_cylinder_index},
   since a CCR dive should now simply set the sample->sensor[] indices
   correctly instead.

 - in a couple of places, start actually looping over the sensors rather
   than special-case the O2 case (although often the small "loops" are
   just unrolled, since it's just two cases.

but in many cases we still end up only covering the zero sensor case,
because the CCR O2 sensor code coverage was fairly limited.

It's entirely possible (even likely) that this migth break some existing
case: it tries to be a fairly direct ("stupid") translation of the old
code, but unlike the preparatory patch this does actually does change
some semantics.

For example, right now the git loader code assumes that if the git save
data contains a o2pressure entry, it just hardcodes the O2 sensor index
to 1.

In fact, one issue is going to simply be that our file formats do not
have that multiple sensor format, but instead had very clearly encoded
things as being the CCR O2 pressure sensor.

But this is hopefully close to usable, and I will need feedback (and
maybe test cases) from people who have existing CCR dives with pressure
data.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-21 16:33:19 -07:00
Linus Torvalds
11a0c0cc70 Unify sample pressure and o2pressure as pressure[2] array
We currently carry two pressures around for all the samples and plot
info, but the second pressure is reserved for CCR dives as the O2
cylinder pressure.

That's kind of annoying when we *could* use it for regular sidemount
dives as the secondary pressure.

So start prepping for that instead: don't make it "pressure" and
"o2pressure", make it just be an array of two pressure values.

NOTE! This is purely mindless prepwork.  It literally just does a
search-and-replace, keeping the exact same semantics, so "pressure[1]"
is still just O2 pressure.

But at some future date, we can now start using it for a second sensor
value for sidemount instead.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-20 17:32:54 -07:00
Dirk Hohndel
94d8abd1a2 Correct list of Shearwater BLE dive computers
Some Petrel 2 computers are dual stack. We need to list the Petrel here as well
since the Petrel 2 actually identifies itself via BT/BLE as Petrel and we can't
tell them appart until after we started a download.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-19 06:21:23 -07:00
Dirk Hohndel
08c2f5492a BLE on iOS: use uuid instead of BT address
iOS doesn't give us an address of BT devices.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-19 06:21:23 -07:00
Dirk Hohndel
0e865ef4e7 Move variable into the code block it is used in
Avoids an "unused variable" warning.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-19 06:21:23 -07:00
Dirk Hohndel
a38d440d5e BLE discovery: give the agent some time
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-19 06:21:23 -07:00
Dirk Hohndel
526da269cc iOS BLE support: no localBtDevice, go straight to discovery
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-19 06:21:23 -07:00
Dirk Hohndel
7cc34aec9d iOS build: need to more includes
It's kinda odd this builds fine on other OSs, but whatever.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-19 06:21:23 -07:00
Dirk Hohndel
e23ae817c7 BLE dive computers: add Perdix
This is both correct (many Perdix support BLE) and necessary
as the Perdix AI identifies itself (sadly) as Perdix.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-19 06:21:23 -07:00
Jan Mulder
883063875e BLE serial read/write buffer
The adapted define was confusingly wrong. Apparently, the BUFSIZ
define was coming from some include file, and was dependent on
platform (Linux 8K, Andorid 1K). Simple rewrite to a new define
and a proper value for both Linux and Android. If 4K is big
enhough, is a little uncertain, as its depends on the read
behavior of all libdivecomputer parsers using this serial
BLE interface.

The buffer size needed (on read, as that is the most prominent
direction when interfacing with DCs) is (most likely) 2x the
maximum block the libdc parsers request at once. I did not
study all parsers, but the Shearwater parser request 20 bytes
at once (we know that from the 1 packet at the time read, we
had before). The OSTC parser request 1K blocks for data
that is longer than 1K (like profiles, header tables).

The 1K we had on Android was working for Shearwater,
Eon Steel, but not for OSTC,as its reads 1K at the time
at max, and overflowing the buffer.

So 32k or 64k seems way to big (as in, much bigger than
any libdc read).

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-07-19 11:12:35 +09:00
Dirk Hohndel
8f0621f733 QML UI: correctly match BT names with products
And remove the remaining references to the "Paired Bluetooth
Devices".

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-18 00:49:31 -07:00
Dirk Hohndel
025efc12d4 QML UI: remove the Paired Bluetooth Devices virtual vendor
We now actually handle connections in a sane manner and don't need
that workaround anymore.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-18 00:49:31 -07:00
Dirk Hohndel
cec3c256e7 Add detection of the Shearwater Predator via BT
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-18 00:49:31 -07:00
Dirk Hohndel
2f84a85dc9 Resolve type confusion
No idea why this now shows up as an error in the iOS build.
We need to refer to the typedef, not the underlying struct.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-17 16:50:03 -07:00
Dirk Hohndel
a4f045abaa Add the connections that we find to the model
So far this only deals with BT addresses. We also need to add other
connections that we detect.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-16 21:53:44 -07:00
Dirk Hohndel
c21845aa01 Add ConnectionListModel
We'll use that to do a better job of showing the connection used when
talking to a dive computer.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-16 21:53:44 -07:00
Jan Mulder
9397dbb432 Correct BT detect for OSTC Sport
Apparently, OSTC Sport has a BT name like OSTCs<space><serial>.

Small code addition to detect this properly. As long as we
do not have an improved way of detection. Notice that most of
the HWs use the same BT hardware, so simple detection on offered
services will not work.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-07-15 14:43:13 +09:00
Dirk Hohndel
bec5f3c44f BT support: track if Bluetooth is available
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-12 04:13:25 -07:00
Jan Mulder
fbaaa64a4a Trivial code cleanup
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-07-11 17:11:49 +02:00
Jan Mulder
8911281593 OSTC over BLE: read a long as needed
See also b409e9fc91 and 709c1df2af. The OSTC parser
cannot handle reads of single 20 byte BLE packages in serial mode.
Instead of doing a deeper down agressive read, we can read on
the serial level more subtile. As the parser is requesting a
specific number of bytes, we just read that number of bytes and
return them. As the 20 byte BLE packets do (obviously) not
align with the reading requirement of the libdc parser, a little
housekeeing needs to be done in between individual reads.

CAVEAT 1: In contradiction to 709c1df2af, this is supposed to
work for all parsers that properly specify the needed bytes to fetch.

CAVEAT 2: All above tested on Linux Desktop with bluez stack.
Subsurface mobile is step 2.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-07-11 13:41:21 +02:00
Jan Mulder
b409e9fc91 BLE read: remove aggressive read
Commit 709c1df2af introduced a hard blocking read for BLE devices.
This did break BLE reads from multiple DCs, and (in hindsight) was not
a correct implementation. It would require, for example, dynamic
read buffers as especially profile data grows with dive time, and
in addition, and more importantly, also the OSTC libdc parser cannot
process the entire profile of a dive at once (but likes to receive
it in 1K blocks). So, basically, it introduced issues, and did not
solve the OSTC read.

This commit reverts this hard blocking read (and as such will break
OSTC BLE reads). But it enables removal of the special cases for
the EON Steel and G2.

A next commit will solve OSTC BLE reads.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-07-11 13:29:41 +02:00
Jan Mulder
b7057c414f OSTC over BLE: take care of credits
Handle credits. Do not just ask for maximum credits all the time as this
will stop the download. Also do not let the credits go back to 0 (while
this might work, this is not tested). Getting back the 0 credits stops
the download, and even when it can be restarted, it is less efficient
(and not needed). Notice also that it takes some time before a grant
request is honoured. During testing I saw reception of up to 25 packets
between request and grant. So a lower bound for the request of
32 packets seems resonable.

One aspect the Telit/Stollmann TIO puzzeled me. Sections 4.1 and 4.2
both talk about credits, but my hyphothesis is that there are two
credits counters in play. One for traffic either way. This commit
only deals with credits granted by Subsurface to the OSTC to send
data. Credits granted by the OSTC to allow Subsurface to send new
commands is NOT part of this commit, and is seemingly not needed
in our scenario. As we only send new commands to the OSTC when
a previous one is finished (per HW's interface spec), the OSTC
does not run out of credits to receive commands.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-07-11 13:17:00 +02:00
Dirk Hohndel
e8b46039f6 Tell user if we reached a dive that was already there
This way it's more obvious why no dives were downloaded.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-09 16:29:16 -07:00
Dirk Hohndel
e6c2b14588 More meaningful device info display
While it's nice to have the numerical model in the logfile,
on the screen the user wants to see the dive computer product
name. And none of those hex numbers that make the text so long
that it becomes useless.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-09 16:09:04 -07:00
Dirk Hohndel
8e5c211e21 Revert "Add support for tank sensor battery for Perdix AI"
This reverts commit ed43b5dced ("Add
support for tank sensor battery for Perdix AI") since a much better
solution to get to that information has been implemented in
libdivecomputer.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-09 14:46:42 -07:00
Dirk Hohndel
d2a5bf87c4 QML UI: add dev_info data to AppLog
This should make it easier to tell how far we get downloading data
from dive computers.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-09 12:50:22 -07:00
Dirk Hohndel
55df597994 BLE support: the G2 wants packages one at a time
Just like the EON Steel it doesn't want us to loop until all packages
have been received.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-09 11:57:32 -07:00
Dirk Hohndel
52d5172a70 Automate picking supported DCs on iOS and Android
We use a little script to create the code snippet. This script in return
relies on comments that were added to the latest libdivecomputer source
(in the Subsurface-branch).

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-08 16:06:12 -07:00
Dirk Hohndel
d5793ea6af If we detect a different model than expected, use it
This is useful if the underlying code in libdivecomputer can reliably
detect specific hardware models.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-08 09:57:21 -07:00
Dirk Hohndel
ed43b5dced Add support for tank sensor battery for Perdix AI
This is a bit awkward with a VENDOR event - but at the time the strings
are generated, we don't have the information, yet, that we need to
determine these values (we need the last sample parsed, but the strings
are created as part of the dive headers.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-07 13:48:24 -07:00
Dirk Hohndel
4834f51a73 BLE: reduce the noise of debug output
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-06 09:35:04 -07:00
Dirk Hohndel
a8468caaa2 BLE: minor code cleanup
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-06 01:37:21 -07:00
Alex Blasche
bf3cc2f64b Make compile with Qt developer builds
subsurface/core/divesitehelpers.cpp: In member function 'virtual void ReverseGeoLookupThread::run()':
subsurface/core/divesitehelpers.cpp:128:12: error: invalid use of incomplete type 'class QDebug'
     qDebug() << "no reverse geo lookup; geonames returned\n" << fullReply;
            ^

Signed-off-by: Alex Blasche <alexander.blasche@qt.io>
2017-07-06 12:43:42 +09:00
Dirk Hohndel
a4bb61b58a BLE download: EON Steel doesn't want to loop over reads
This seems a bit brutal, but it does the trick and makes EON Steel
downloads work again.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-04 09:30:05 -07:00
Dirk Hohndel
8a1f5b9566 BLE: write confirmation isn't HW only
Happens on the Suunto EON Steel as well.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-04 09:29:31 -07:00
Jan Mulder
3cde4f594d Address code review
Addresses code review by Dirk. No functional changes.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-07-04 23:46:07 +09:00
Jan Mulder
709c1df2af BLE: read until no more data in coming in
The current BLE read reads just one 20 bype packet. That packet size is set
in ble_serial_ops, so, without being able to test on anything other than
a OSTC3, I assume that this holds for other BLE DCs too. So, I think is
is weird that those interfaces work with the current read() of just one
packet at the time.

As we need a blocking read (at least for the OSTC parser), just read all
data that is available on the input. And when we think we are done, give
the QtEventloop control to see if there is more, and process that incoming
data as well. All this basically implements a blocking read.

CAVEAT 1: This might break the reading from the currently working BLE devices.

CAVEAT 2: With this, I still cannot read the OSTC3 completely. For
developers familiar with the HW transfer protocol: it just stops while
reading the first full dive (header + profile) command 0x66, despite
correctly reading about 5Kb of data before. For some
reason, I do not believe that this is related to this commit.

CAVEAT 3: All above tested on Linux Desktop with bluez stack, and
confirmed NOT to work on Android 7.1.2, build with Qt 5.9.0, And
yes, I know 5.9.1 recommended.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-07-04 23:46:07 +09:00
Jan Mulder
d6b17fef08 OSTC over BLE: filter and track OSTC credit traffic
1) As the OSTC sends data to the BLE central role (the SSRF client) over 2
characteristics, we have to filter the administrative credit data from
the actual dive data that it received. The characteristcStateChanged
function is adapted for this.

2) We have to be sure that the Terminal Client I/O is fully defined during
opening the connecton to the OSTC. From 6d505b24f0c15 we can see
that the last step in setting up the terminal interface is the grant
of credits. This is done by writing to the proper (the only one, with
id = 0x2902) descriptor of the credits RX characteristic. The here
added slot is triggered on the completion of write of credits marking
the final stage of the setup.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-07-04 23:46:07 +09:00
Jan Mulder
6031692a39 Use waitFor instead of timer
See e79bede0aa. We rather use wait in combination
with spinning the event loop.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-07-04 23:46:07 +09:00
Jan Mulder
f6768cedf3 OSTC over BLE: Select the right service
The current "select the correct BLE service to talk to" is flawed.
It assumes that the first found non-standard UUID is the right one
and apparently it is for some DCs. But not for the HW devices.
The HW devices use a "standard" ie. approved by the Bluetooth
SIG, controller, that comes with a UUID that our code currently
considers standard so not to be the right one.

This (simple) commit selects the right service for HW. The UUID
is hard coded, and this is ok, because it is tied to the hardware
used by HW. Futher, it does not change anything for other BLE
devices.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-07-04 23:46:07 +09:00
Jan Mulder
6fe0388b96 OSTC over BLE: initialize Terminal I/O client
This initalizes the Terminal I/O client as described in paragraph 3 of
http://www.telit.com/fileadmin/user_upload/products/Downloads/sr-rf/BlueMod/TIO_Implementation_Guide_r04.pdf

This is for all Heinrichs Weikamp computers, that use referenced BT/BLE hardware
module from Telit Wireless Solutions (Formerly Stollmann E+V GmbH). The 16 bit
UUID 0xFEFB (or a derived 128 bit UUID starting with 0x0000FEFB is a
clear indication that the OSTC is equipped with this BT/BLE hardware.
Furthermore, most devices equipped with this BT/BLE hardware have BT addresses
starting with 00:80:25:...

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-07-04 23:46:07 +09:00
Dirk Hohndel
bc1a313c9f Increase the BLE timeout to 12 seconds
This seems really long, but one user appeared to get a response after
almost 10 seconds. So going with 12 for some margin of error.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-03 22:22:16 -07:00
Dirk Hohndel
345e063eb5 Rewrite the matching code for BT devices
This should be much more robust in getting us the correct Bluetooth address
and the correct vendor / product for our selection.

When we pick a paired device, we extract the address right from its name.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-03 21:58:26 -07:00
Dirk Hohndel
bc864c3bce Don't add all discovered BT devices
This really doesn't help us as we can't associate a vendor/product with
devices we don't recognize, so we can't download from them, anyway.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-03 21:58:26 -07:00
Robert C. Helling
d17bb6318e Don't try to dereference empty product/vendor list
Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-07-04 07:06:20 +09:00
Jan Mulder
d7b8ad7a44 BT discovery Android: Allow BT/LE devices connect both ways
For DCs that support both BT and LE, allow the user to connect to both
interface layers. Maybe not usefull in the end (as BT is faster
than LE), but as long as BT on Android is WIP is it very useful
to be able to connect to the interface layer we like.

Just add it to the Paired Devices list twice. The normal way, and
the LE: prepend way.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-07-04 05:49:52 +09:00
Dirk Hohndel
65f6db6e2c Don't warn about missing en-US translation for Qt
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-03 13:29:25 -07:00
Dirk Hohndel
0482f054a7 QML UI: add more dive computers
This really needs to be done differently - we need a structured way
to associate a transport mechanism with each of the dive computers
we support.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-02 21:57:08 -07:00
Dirk Hohndel
7199ad33e2 BT discovery: detect Scubapro G2
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-07-02 18:32:16 -07:00
Dirk Hohndel
61fff71391 Android: mark BLE only paired devices
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-30 13:13:38 -07:00
Dirk Hohndel
c145cbd754 QML UI: save BT address as string
And do the same LE: prefix marking as in the desktop version.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-30 13:12:53 -07:00
Dirk Hohndel
6837120bb1 BLE handling: create helper function to add the LE: prefix
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-30 13:12:07 -07:00
Dirk Hohndel
344b9e3234 Fix one call site that hadn't been updated
When updating to the new dc_custom_io_t, this one spot had been
missed.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-27 21:24:00 -07:00
Dirk Hohndel
ea8e3006db Whitespace
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-27 20:53:21 -07:00
Dirk Hohndel
f98fa50c39 BLE code: address some compiler warnings
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-27 20:53:11 -07:00
Dirk Hohndel
fbdba88dec Update Subsurface-branch of libdivecomputer check
We now require the Subsurface-branch, and at least version 2 of the
Subsurface API of libdivecomputer.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-27 20:52:12 -07:00
Linus Torvalds
526595644f Use SSRF_CUSTOM_IO v2 to implement device data quirks for BLE GATT
Right now we have a quirk for Shearwater devices to set the random
address flag, but also to handle the differences at read/write time.

With this, I can finally download from both the Suunto EON Steel and the
Shearwater Perdix AI with the same binary.

It's not *pretty*, but it works.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-27 15:14:27 -07:00
Linus Torvalds
d01b7bf891 Switch over to SSRF_CUSTOM_IO v2
I hate changing the IO interfaces this often, but when I converted the
custom serial interface to the more generic custom IO interface, I
intentionally left the legacy serial operations alone, because I didn't
want to change something I didn't care about.

But it turns out that leaving them with the old calling convention
caused extra problems when converting the bluetooth serial code to have
the BLE GATT packet fall-back, which requires mixing two kinds of
operations.

Also, the packet_open() routine was passed a copy of the 'dc_context_t',
which makes it possible to update the 'dc_custom_io_t' field on the fly
at open time.  That makes a lot of chaining operations much simpler,
since now you can chain the 'custom_io_t' at open time and then
libdivecomputer will automatically call the new routines instead of the
old ones.

That dc_context_t availability gets rid of all the

	if (device && device->ops)
		return device->ops->serial_xyz(..);

hackery inside the rfcomm routines - now we can just at open time do a simple

	dc_context_set_custom_io(context, &ble_serial_ops);

to switch things over to the BLE version of the serial code instead.

Finally, SSRF_CUSTOM_IO v2 added an opaque "dc_user_device_t" pointer
argument to the custom_io descriptor, which gets filled in as the
custom_io is registered with the download context.  Note that unlike
most opaque pointers, this one is opaque to *libdivecomputer*, and the
type is supposed to be supplied by the user.

We define the "dc_user_device_t" as our old "struct device_data_t",
making it "struct user_device_t" instead.  That means that the IO
routines now get passed the device info showing what device they are
supposed to download for.

That, in turn, means that now our BLE GATT open code can take the device
type it opens for into account if it wants to.  And it will want to,
since the rules for Shearwater are different from the rules for Suunto,
for example.

NOTE! Because of the interface change with libdivecomputer, this will
need a flag-day again where libdivecomputer and subsurface are updated
together. It may not be the last time, either.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-27 13:58:15 -07:00
Alex Blasche
e79bede0aa Use QLowEnergyController without QEventLoop
We rather use wait in combination with spinning the event loop.

Signed-off-by: Alex Blasche <alexander.blasche@qt.io>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-27 11:03:19 -07:00
Alex Blasche
57753321b0 Ensure all found BLE services are tracked
If a device has more than one service the order of service discovery
determined the selection of the service that we intend to interact
with. This assumption is not accurate and is even platform dependent.

Thinking ahead, it is likely that some devices may require us to keep
track and interact with multiple services at the time.

The new logic still suffers from the fact that there is no way
to select the correct service for interaction. This will require
higher level stack changes.

Signed-off-by: Alex Blasche <alexander.blasche@qt.io>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-27 11:03:19 -07:00
Alex Blasche
81dabe5ace Fix incorrect uuid check due to temporary char* in QString::toUtf8()
toUtf8() creates a temporary char* representation which is assigned to
uuid. As soon the object created by toUtf8() gets destroyed, the uuid
pointer points to releases memory.

The intention is to check that we don't have one of the standard
16bit Bluetooth uuids. That's the purpose of QBluetoothUuid::toUInt16().

Signed-off-by: Alex Blasche <alexander.blasche@qt.io>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-27 11:03:19 -07:00
Linus Torvalds
4f3a9cdb35 BT serial: recognize LE-only devices, and fall back to emulated serial
This is somewhat hacky, but it allows at least the Shearwater
libdivecomputer backend to continue to treat even the BLE GATT model as
just a serial protocol.

What it does is create a special "emulate serial behavior over the
packetized BLE protocol" helper layer, that qtserialbluetooth falls back
on when rfcomm is not available.

NOTE! This still requires some BLE packet code changes to work with the
odd way that Shearwater sets up their BLE GATT communication.  So note
that no further patches are necessary to *libdivecomputer*, but some
updates are needed for the subsurface qt-ble.cpp code.

I have those updates in my tree, and this code is all tested on my
Perdix AI, but those patches are currently too ugly to commit as-is.
I've cleaned up this "fake serial" code sufficiently, that cleanup comes
next.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-26 22:21:14 -07:00
Linus Torvalds
d0c3ef4cf8 Bluetooth: make LE-only devices add "LE:" as an address prefix
This seems a bit odd, but it actually has three different reasons for it:

 - It's a visual indication of BT LE mode for users

 - the rfcomm code only works with legacy BT support, and if we scan a
   device that only does LE, we want the custom serial code to instead
   automatically fall back on a "emulate serial over LE packets" model.

 - we want rfcomm to remain the default for devices that do both legacy
   BT _and_ LE, but we want people to have the ability to override the
   choice manually.  They can now do so by just editing the address
   field and adding the "LE:" prefix manually, and it automatically gets
   saved for next time.

So while a bit hacky, it's actually a very convenient model that not
only works automatically, but allows the manual override.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-26 22:20:01 -07:00
Dirk Hohndel
f5e1df0423 Add the EON Steel as support DC on Android
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-24 22:32:56 -07:00
Dirk Hohndel
6f1590b098 BLE support: convert fprintf(stderr,...) to qDebug()
This way the output can be seen in the AppLog on Android.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-24 22:32:47 -07:00
Dirk Hohndel
63fc06e728 BLE support: add SPDX headers
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-24 22:32:01 -07:00
Linus Torvalds
196adb591b Very early and likely quite broken BLE GATT code
This is some very early and hacky code to be able to access BLE-enabled
dive computers that use the GATT protocol to send packets back and forth
(which seems to be pretty much all of them: a vendor-specific GATT
service with a write characteristic and a notification characteristic
for reading).

For testing only.  But it does successfully let me download dives from
my EON Steel and my Scubapro G2.

NOTE! There are several very hacky pieces in here, including just
"knowing" that the write characteristic is the first one, and the
notification characteristic is second.  The code should actually check
the properties rather than have those kinds of hardcoded assumptions.

It also checks "vendor specific" by looking at the UUID string
representation, and knowing that the standard ones start with zero.
Crazily, there doesn't seem to be any normal way to test for this,
although I guess that maybe the uuid.minimumSize() function could be
used.

There are other nasty corners. Don't complain, send me patches.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-24 21:58:01 -07:00
Dirk Hohndel
d93280f1dc QML UI: DiveList: add date box to trip header
This way you can tell when a trip happened.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-24 13:13:04 -07:00
Stefan Fuchs
b109b51f7f Translate "more than n days" for surface interval
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-06-23 22:43:39 +09:00
Dirk Hohndel
63a4a755a3 Warn when not compiling against the matching libdc version
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-22 17:53:53 -07:00
Dirk Hohndel
d58de37167 Merge branch 'master' of git://github.com/torvalds/subsurface-for-dirk 2017-06-22 17:41:21 -07:00
Jan Mulder
eb8e3de6da Typo of translated string
Trivial typo.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-06-23 07:55:58 +09:00
Linus Torvalds
add253ca9e Convert to new libdivecomputer custom IO model
Instead of being "custom serial", it's a IO model that allows serial or
packet modes, independently of each other (ie you can have a bluetooth
device that does serial over BT rfcomm and packet-based communication
over BLE GATT with the same serial operations that describe both cases).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-22 08:43:47 -07:00
Dirk Hohndel
1d2bcffbdf Use plural form for cloud connection wait
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-22 04:19:23 -07:00
Dirk Hohndel
ba2b5d8505 Add en_US translation for plurals
This way in the en_US locale we no longer get shown the odd "dive(s)"
and instead get correct singular and plural forms.

Most of the patch is just a reindentation as it removes the if clause
that used to do the special case of NOT loading a translation for the
en_US case.

Right now we start with a trivial en_US translation file. My guess is
that this will be overwritten once we do the next round of "new strings,
new translations".

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-22 04:19:23 -07:00
Dirk Hohndel
6e785a7bfc QML UI: correctly build plural translation
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-22 04:19:23 -07:00
Jan Mulder
ac750bbf20 mobile: prune DC list to download from
Currently, only a small number of dive computers can be downloaded from
the mobile app. Only present the supported ones to the user. So, currently
restricted to classic BT. Not sure about FTDI support at this point.

Version 2 of the same commit after review from Dirk. Fundamentally,
support is as follows: Android: BT, BLE, and FTDI. iOS: BLE only. For
all other OSses, this commit has no changes. As the BLE backend is
not yet ready, no support on iOS yet.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-06-22 20:19:06 +09:00
Robert C. Helling
5f5e52fb46 Preserve VPM-B state in profile display
This fixes a but reported by Willem in the display of VPMB
ceilings for logged dives.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-06-22 10:39:37 +09:00
Dirk Hohndel
8bee7e6172 QML UI: use the short date format
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-18 17:48:04 -07:00
Dirk Hohndel
2b01ab7d50 Clean up git storage update messages
Translate all of them, but also remove some redundant or possibly
misleading messages. These are now seen by users, not just developers
trying to debug the code.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-18 01:00:30 -07:00
Dirk Hohndel
b2b51c833a QML UI: redesign the user notification
The old system of cloud access updates with fake percentages just wasn't
helpful. Even worse, it hid a lot important information from the user.
This should be more useful (but it will require that we localize the
messages sent from the git progress notifications and make them more
'user ready').

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-17 23:22:37 -07:00
Dirk Hohndel
2d5f023b58 Set default cloud timeout to ten seconds for mobile app
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-17 22:56:08 -07:00
Lubomir I. Ivanov
27deb317b0 tankinfomodel.cpp: clamp row index to [0 - MAX_TANK_INFO]
MAX_TANK_INFO is a new macro in dive.h to define the
maximum number of tank_info_t objects.

TankInfoModel's data() and setData() now check for valid
row indexes before accessing the tank_info[] array directly.

Without this patch TankInfoMode::data() can cause a SIGSEGV.

Reported-by: Pedro Neves <nevesdiver@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-15 14:48:49 -07:00
Robert Bodily
85021b94b1 Fix buffer overrun and primary sensor id issues in Liquivision import
This changeset fixes 5 issues specific to importing from Liquivision dive logs:

Issue #1: Buffer overrun causes segmentation fault.
At the end of a dive record, untranslatable data is skipped and the file is
scanned for the start of the next dive.  This scan was implemented without
regard to buffer size and so the scan ran over the buffer boundary when trying
to scan for the next record after importing the last record in the file.

Issue #2: Incorrect identification of the primary sensor.
The primary tank pressure transmitter was being identified by using the sensor
ID reported in the first pressure event record encountered.  When diving with
multiple transmitters (buddy, student, or group transmitters), this is often
not the case and results in the buddy or other group transmitter's pressure
data being imported instead of the primary's.

Through empirical observation of several multi-sensor logs, I identified a
previously unhandled event code (0x10) as marking a sensor identification
event record.  Parsing this record allows the primary and other sensors
to be definitively identified regardless of which one sends the first pressure
event.

Issue #3: Sensor values added to the sample collection regardless of sensor ID.
When processing events, the code previously dropped through to create a sample
for every pressure event record, regardless of which sensor ID that event is
associated with.  Pressure events for sensors other than the primary are now
ignored and omitted from the sample collection.

Issue #4: Duplicate samples when pressure event time syncs with sample time.
The sample index (d) was not incremented in this specific case resulting in
a duplicate sample (for the same sample time) being created when processing
the next pressure event record.

Issue #5: Unsigned time difference results in erroneous interpolated samples.
When interpolating/extrapolating depth and temperature values for a between-
samples pressure event, a signed time value is subtracted from an unsigned time
value, resulting in an unsigned term.  This term is used as a scaling factor
and should be signed to allow for a negative value.  Currently, negative values
are instead treated as large unsigned values which result in erroneous scaled
depth and temperature values.

Signed-off-by: Robert Bodily <robert@bodily.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-15 14:44:18 -07:00
Jan Mulder
db39f1a847 code cleanup: remove 2 unused structs
Luckily these 2 structs in this ugly code are not used. Remove them.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-06-16 05:31:41 +09:00
Miika Turkia
ec40a25007 Parse He when importing from DM5
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2017-06-13 18:11:22 +09:00
Jan Mulder
8cd711f8e2 BT Discovery: add Shearwater Petrel and Perdix
Add Shearwater Petrel and Perdix to automatic detection

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-06-12 19:12:40 -07:00
Dirk Hohndel
be8f20dda6 Don't declare static function in .h file
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-12 11:05:42 -07:00
Jan Mulder
23df593817 Mobile: wrap up fixes for BT download on Android
Major functional change in this commit is the addition of found static BT devices
to the internal administration (on Android), in a way that is equivalent to
mobile-on-desktop. So, in both cases, the list of devices in the app are
as in the list of devices on the host OS (Linux or Android). To minimize code
duplication, the btDeviceDiscovered slot is split in two parts, the part to
act as slot for the Qt BT discovery agent (Linux, so mobile-on-desktop), and
the part only needed for Android.

Remaining to be fixed: the correct handling of the QML UI selection of
vendor/product. The first default dive computer is correctly detected,
all paired devices from the virtual vendow can be selected, but clicking
through vendors results in non logical selections. It is obvious why
this is, but a fix is not straigforward at this point.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-12 11:05:08 -07:00
Jan Mulder
5142d7409f Mobile: add BT name to vendor/product capability
This adds a central function to convert a BT name to a vendor/product pair
known to Subsurface. This allows interfacing from a paired BT dive
computer, without actively selecting its type, but by selecting it
from the list of paired BT devices. So, after this, downloading from
multiple (paired) DCs is also possible.

And not the niced piece of code ...

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-12 10:59:05 -07:00
Jan Mulder
a43cafa515 Mobile: do not BT Discover on Android (Q_OS_ANDROID vs Q_OS_LINUX)
This seems a very trivial commit, but it is not. It appears that on an Android
build, with defined(Q_OS_ANDROID) the Q_OS_LINUX variable is also defined.

This results in a very tricky discovery process: 1) the JNI stuff pulls the paired
devices from the local BT controller, and 2) The QT discovry agent gets active
BT devices. 1) is a static list, that is, not dependent on actual
visual/discoverable BT devices; it is just cached data from the phone. 2) On
Android, this results in a list of actively visible (paired and not paired)
devices. On desktop, however (with QT/bluez BT stack) the QT discovery agent
just gets the list of paired devices, so more or less equivalent to the situation
described under 1) for Android.

Ok, a long story, but just do not do a discovery on Android at all. Basically,
we need the BT address, device name, and possibly a specific SPP service UUID. This are
fixed and known for HW and Shearwater at this point, so there is no need for a
(lengthy) discovery process, and making sure the the dive computer is discoverable
at the moment the app wants to construct its data to show in the UI. So, the
static list of paired devices is all we need.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-12 10:58:57 -07:00
Dirk Hohndel
ca59dbd40d BT discovery: distinguish names with addresses
It's possible that the user has more than one dive computer with the
same name paired with their computer / device. So let's just add the
address to the name to make it possible to tell those apart.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-12 10:05:55 -07:00
Jan Mulder
790c0dcfc8 QML UI: add internal admin for virtual vendor
Added a list of paired BT devices for the "Paired BT Devices" vendor. The
devices under this vendor represent all BT devces that can be found
from the local BT interface. Some special processing is required, as
the BT provided data is (obviously) missing the specific data needed
to open a BT device using libdc code. This processing is not in
this commit, but will follow. This commit is preparation for that.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-12 09:55:27 -07:00
Jan Mulder
f6e94e691f QML UI: call correct function for BT address
After the recent refactoring of QMLManager to btdiscovery, the
manager.getBtAddress() got superseeded by
downloadThread.data().getDetectedDeviceAddress(). Corrected this
here.

Futher some debug output is modified, so that it report the proper
function names.

This corrects the download from an automatically detected OSTC 3.
Manul selection of the same device from the fake vendor "Paired
BT Devices" does not work, however. Still work to be done in
that area.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-12 09:49:11 -07:00
Jan Mulder
a7288cc912 QML UI: do not crash on selecting dive computers
For reasons unknown to me, the DCDeviceData instance was freed way too early,
and used afterwards, obviously resulting in a SIGSEGV. This commit creates
the DCDeviceData as a direct child of the QMLManager instance, ensuring
it does not get freed prematurely.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-12 09:49:05 -07:00
Lubomir I. Ivanov
e7a7bd4de2 qthelper.cpp: leave lbs rounding to QString().arg() with 'f'
The following call in weight_string():
str = QString("%1").arg(lbs, 0, 'f', lbs >= 40.0 ? 0 : 1);

will make values in lbs larger or equal to 40 to have no fractional
part and be rounded to nearest, while values less than 40 will have one
decimal place.

fixes #412

Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-11 16:03:38 -07:00
Lubomir I. Ivanov
fb3ce8554c datatrak.c: don't use POSIX %m format for sscanf() in dtrak_prepare_data()
The format option "%m" doesn't work for MINGW/Windows and is reported as
an unknown conversation type and this sscanf() call would not work.

The alternative is to malloc() enough space manually - e.g.
strlen(input) + 1.

Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-11 15:56:41 -07:00
Dirk Hohndel
74bf8d5260 Android build fix
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-11 15:46:39 -07:00
Dirk Hohndel
b14a522f4f QML UI: move BT handling into core code
This shouldn't be part of the UI (qmlmanager), but part of our
overall handling of dive computers and BT devices.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-11 13:55:41 -07:00
Dirk Hohndel
e7cd1785c4 QML UI: add paired BT devices as vendor
This way the user can explicitly chose which dive computer they
want to download from.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-06-11 13:55:41 -07:00
Dirk Hohndel
02d3289bbf Android BT download: hardcode UUID
While it seemed logical to use the advertized service UUID that doesn't
appear to be working - instead using this hard coded UUID seems to do
the trick. I now did a successful download from my Shearwater Petrel.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-31 22:16:25 -07:00
John Van Ostrand
40f5e2e30c Cochran import: Removed long tail of 0 depth from profile
The Cochran logs the first 10 to 20 minutes (configurable) of
surface interval in case the diver re-submerges.

Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-31 21:54:05 -07:00
John Van Ostrand
3ca1191251 Cochran import: better support for older models
Older models allowed for configuration sample frequency; This patch adds
detection of sample frequency (profile_period) for cochran log file
imports.

Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-31 21:53:00 -07:00
Dirk Hohndel
4ed6ae0dc7 Android BT: use NoSecurity for connection
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-31 11:43:18 -07:00
Dirk Hohndel
286bac6d30 Android: connect to BT via uuid instead of port
We remember the offered service uuids as we detect the device and then
try the first one - likely this needs to be fixed / tuned to pick the
right one if multiple uuids are offered.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-31 10:15:40 -07:00
Dirk Hohndel
e0771e50f1 Don't override device name when using BT
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-31 10:14:24 -07:00
Dirk Hohndel
cbe03fd88d FTDI support: add minimal debugging output
Copied the libdivecomputer macros for convenience.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-29 21:55:49 -07:00
Dirk Hohndel
5c4f9986fe Use magic 'ftdi' as device name on Android
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-29 15:05:46 -07:00
Dirk Hohndel
a568562503 QML UI: try to match BT names to known dive computers
So far this just adds data to the log.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-29 12:25:21 -07:00
Jan Mulder
76a38b6326 More optimal search
The linear search to determine that a just downloaded dive was already
downloaded, started from the oldest dive in the logbook. It is, however
more likely that a just downloaded dive is one of the most recently
downloaded. So, just search backwards. Just a trivial performance
improvement.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-05-29 08:57:04 -07:00
Jan Mulder
88738ede30 mobile: dive_table.preexisting not set importing from mobile
Searching why the mobile app also downloads pre existing dives, it appears
that in the mobile app, the preexisting attribute is 0, where it should be the
number of dives before the download. This is easily solved by adding the correct
setting on the download thread. This solves the issue of downloading  pre existing
dives.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-05-29 08:57:04 -07:00
Dirk Hohndel
271b4caddc Fix build error
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-27 11:21:57 -07:00
Dirk Hohndel
5a4485b63b Random whitespace cleanup
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-27 11:07:20 -07:00
Tomaz Canabrava
7858376727 QML UI: add the DownloadThread
For this I had to also make the DCDeviceData accessible,
and for that it needed to be a pointer.

Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-27 11:07:20 -07:00
Tomaz Canabrava
85e92597b5 Set descriptor when starting thread.
Set the descriptor when starting the thread, this removes
code from the desktop code and makes everything in sync always.

Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-27 11:07:19 -07:00
Tomaz Canabrava
09904ddff5 Extract the device_data_t into helper class
Keeping the Desktop and QML versions of Subsurface
using the same codebase will keep the code saner,
this change makes the Desktop version use the
DCDeviceData helper sturct that encapsulates
the device_data_t member for easy access on the
QML. This also helped move a bit of initializations
from the UI to the Core - and that's always good.

Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-27 11:07:19 -07:00
Tomaz Canabrava
acbe5de1cb New class DCDeviceData
this class encapsulates the device_data_t from libdivecomputer
in a way that permit us to use it on QML.
this will be needed to prepare the data for the download thread.

Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-27 11:07:19 -07:00
Tomaz Canabrava
a55efcf7d8 Move the fill_computer_list() out of widgets
fill_computer_list() creates a Qt friendly
structure that contains all of the necessary
information about dive computers and it's
devices, and it's needed both in Qml and Widgets
to allow the user to download their dives.

This patch makes it possible to use the code
in QML without duplication.

Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-27 08:07:35 -07:00
Tomaz Canabrava
dec47e11cd Separate the download thread from the widget logic
This is important to not duplicate code for the Qml
view. Now the DownloadFromDiveComputer widget is mostly
free from important code (that has been upgraded to the
core folder), and I can start coding the QML interface.

There are still a few functions on the desktop widget
that will die so I can call them via the QML code later.

I also touched the location of a few globals (please, let's
stop using those) - because it was declared on the
desktop code and being used in the core.

Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-27 07:53:14 -07:00
Dirk Hohndel
6bfd20a014 Whitespace and warning fixes for cochran.c
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-27 07:37:58 -07:00
John Van Ostrand
f604089ae3 Added support for older Cochran models that have configurable sample intervals.
Corrected problem where dive profiles would include post dive
surface interval samples.

Added detection for corrupt dives.

Signed-off-by: John Van Ostrand <john@vanostrand.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-27 07:22:14 -07:00
Dirk Hohndel
c6bc88b50d Fix some warnings
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-27 07:21:37 -07:00
Robert C. Helling
0cf8ef6e2d Adopt O2 and He densities to 20degC
Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-05-26 15:52:04 -07:00
Robert C. Helling
05a7fe1d40 Gas denisity display improvement
This combines the display with EADD since this is the same
value with a different unit. And show it for air dives as
well.

Suggested by Jan Mulder & Anton Lundin

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-05-26 15:52:04 -07:00
Robert C. Helling
98a65b7157 Display gas density instead of SAC in planner
In the planner, the SAC is prescribed, so there is little
use in plotting it (as the color of the cylinder pressure
line). Rather use the color to show the density of breathing
gas.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-05-26 15:52:04 -07:00
Robert C. Helling
bb6ceba4ac Compute and display gas density
This appears to be critical for work of breathing so it might be
worthwhile to compute. So far only in infobox.

For background, see

https://www.youtube.com/watch?v=QBajM3xmOtc

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-05-26 15:52:04 -07:00
Stefan Fuchs
e6d884cf26 Creation of dive duration string and surface interval string
Update the function to create the dive duration string in a way that
it can be used also in info and stats tab and added some more flexibility.

Changed layout for <1h freedives to "0:05:35" (w/o units) or "5:35min"
(with units and :) or "5min 35sec" (with units with space).

Add a new function to create the surface interval string.

Completely remove old function get_time_string() and get_time_string_s().

Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-05-26 15:50:52 -07:00
Robert C. Helling
7b18be2a50 Adopt planner state caching to new struct
Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-05-26 15:44:36 -07:00
Robert C. Helling
57ee5a5477 Assemble global state of planner in a struct
Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-05-26 15:44:36 -07:00
Robert C. Helling
b1ccd2fc43 Move planner notes to separate file
Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-05-26 15:44:36 -07:00
Miika Turkia
ccf916344b Include some extradata info on Seabear import
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2017-05-07 21:36:50 -07:00
Dirk Hohndel
d7cf3408e5 Merge branch 'seabear-refactor'
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-07 07:52:55 -07:00
Salvador Cuñat
75762e5f16 Datatrak import rework: Add another memory size ckeck
As a last minute addition, and for peace of mind and soul, add just
another size check, to run before reading values from buffer.

Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
2017-05-07 07:48:12 -07:00
Salvador Cuñat
47dcc964b8 Datatrak import rework: main functions
datatrak_import() is the main function called from parse_file(), but
dt_dive_parser() is where the hard work is done, for both, drop file
seeking/reading and use memory pointers instead.

datatrak_import() now returns 0 on success or 1 on failure and abort
import if parser function fails instead of keeping on trying.

dt_dive_parser() emits a warning if libdc_model is zero (manual dives).
Do not parse profiles if libdc_model is zero, for unknown models we set
a fake 0xEE value coverted to Aladin Air X/Z libdc model number. Func
now takes a pointer to a buffer and moves along the dive, when done
returns a pointer to the actual memory position or NULL if something
went wrong.

Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
2017-05-07 07:48:12 -07:00
Salvador Cuñat
618cd3fab4 Datatrak import rework: modify parsing macros
Change how parsing macros work to use memory pointers instead of file
descriptors.

Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
2017-05-07 07:48:12 -07:00
Salvador Cuñat
ceb54e6e9e Datatrak import rework: changes on helper funcs
Remove dtrak_profile() profile parsing func as this work is left to
libdivecomputer.
Simplifies read_file_header() to return the number of dives in the log
file as we don't use the rest of header data.
Add dtrak_prepare_data() to achieve a device_data_t structure and get
the correct libdc model number for the device.
Remove checking macro substituted with JUMP in header file.
Add dt_libdc_buffer() to get a buffer parseable with libdivecomputer.

Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
2017-05-07 07:48:12 -07:00
Salvador Cuñat
22f07f5ada Datatrak import rework: initial changes
Remove dtrakheader structure. In the end, we only make use of the number
of dives in the log file.

Define a models_table_t table which strores the known Uwatec's Aladin
models and its equivalence with libdivecomputer known models.

Add a macro to check that movements in memblock buffer don't get out of
the allocated memory.

Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
2017-05-07 07:48:12 -07:00
Salvador Cuñat
25cec35d24 Datatrak import rework: changes of file.c and file.h
Datatrak import is called from parse_file() in file.c. This function
reads the full file to be imported into a memblock structure. It's
easier and more secure, to parse this buffer instead of the file itself.

These are the necessary changes in function datatrak_import()
declaration and call.

Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
2017-05-07 07:48:12 -07:00
Miika Turkia
c832973df5 Fix NDL and TTS for Seabear import
Apparently the refactoring changed these values to be returned directly
in seconds. Not sure why, but luckily we have test cases that discovered
the change.

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2017-05-07 16:27:41 +03:00
Miika Turkia
d851549d9c Remove debug output
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2017-05-07 16:00:52 +03:00
Miika Turkia
221f67206b Make parsing of Seabear header more robust
This should work even if some header line is missing from some DC.

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2017-05-07 15:53:35 +03:00
Miika Turkia
6e1c00078d Add dive mode support for Seabear import
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2017-05-07 15:34:27 +03:00
Miika Turkia
cef56c6290 Import dive number from Seabear CSV file
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2017-05-07 14:19:58 +03:00
Miika Turkia
0dfa448d8c Refactor Seabear import
Moving the GUI independent Seabear import functionality to Subsurface
core. This will allow Robert to call it directly from download from DC.

Tested with H3 against released and daily versions of Subsurface. The
result differs somewhat, but it is actually fixing 2 bugs:
- Temperature was mis-interpreted previously
- Sample interval for a dive with 1 second interval was parsed
  incorrectly

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2017-05-07 13:53:52 +03:00
Miika Turkia
ab1813a445 Move intdup to qthelper
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2017-05-07 09:41:27 +03:00
Dirk Hohndel
92d24a2912 Consistently show dive duration based on preferences
We now respect the settings in the preferences and also only show
the duration as minutes and seconds if the dive is a free dive.

Fixes #361
Fixes #362

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-06 17:43:32 -07:00
Dirk Hohndel
876b479d69 Wire up duration units preference UI
Now we track the preference, but we don't act on it, yet.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-06 13:49:36 -07:00
Dirk Hohndel
9e45999a01 Fix some warnings
Two unused variables and one case of sign confusion.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-06 11:12:28 -07:00
Dirk Hohndel
38af1f2ab9 Check if we have an instance before dereferencing it
If we don't have a GPS service userid in the preferences and the GpsLocation class
isn't instantiated, this would cause a crash.

Fixes #367

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-05-06 11:12:07 -07:00
Robert C. Helling
462797396b File selector should filter images we can actually handle.
So better ask Qt about image formats known to it.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-05-06 08:07:16 -07:00
Stefan Fuchs
59bbaa7820 Image import: Make Exif handling more tolerant, better info,...
Changes to the "Add pictures to dive" function:
- Make Exif handling more tolerant by removing the JPG sanity
  check for EOI
- Give info to user if exif.cpp can't identify a Exif date/time
- Restrict file dialog filter for correct picture time by DC photo
  to JPG because Exif is only available from JPG

Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-05-06 08:07:16 -07:00
Anton Lundin
f14ad7f183 Implement OSTC4 specific settings
Signed-off-by: Anton Lundin <glance@acc.umu.se>
2017-05-04 10:50:15 -07:00
Anton Lundin
5a4e1a5586 Connect up all the OSTC4 common settings
Connect up all the settings that are the same, and remove those who are
not, and correct those who only are minor differences.

Signed-off-by: Anton Lundin <glance@acc.umu.se>
2017-05-04 10:50:15 -07:00
Anton Lundin
527763f306 Start to read/write and present some OSTC4 settings
This is mostly copy-paste from the ostc3 case, but there are some minor
differences. Some minor things have different meaning, and there's a
slightly different command set, but I couldn't figure out a sane way of
joining them.

Signed-off-by: Anton Lundin <glance@acc.umu.se>
2017-05-04 10:50:15 -07:00
Anton Lundin
4cbf64bf99 Wire up a skeleton for configure OSTC 4
Signed-off-by: Anton Lundin <glance@acc.umu.se>
2017-05-04 10:50:15 -07:00
Olivier Verstraet
bf373f5083 Fix calculation of how many samples profile are in datatrack dive log file 2017-05-04 10:37:00 -07:00
Linus Torvalds
9084bbae57 Fix event merging when interleaving dives
The core to avoid adding redundant gas switch events was completely
buggered, and caused the result list to be corrupted if it ever
triggered.  This should fix it.

Fixes: b5de08b7 ("No gas change event on merging dives with same gas")
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Cc: Miika Turkia <miika.turkia@gmail.com>
Cc: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-04-30 12:38:09 -07:00
Dirk Hohndel
b368ecd5aa Add SPDX header to remaining core files
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-04-29 13:32:55 -07:00
Dirk Hohndel
6399eaf271 Add SPDX header to core C files
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-04-29 13:32:55 -07:00
Robert C. Helling
5c98cf35d7 Change the Bluetooth connect call signature
By copying a line from the Linux bluetooth code I can download
from OSTC dive computers on Mac. Don't ask me why this works.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-04-28 17:55:22 -07:00
Jan Mulder
12a59ef313 Correct divesite geocoding translation
See https://github.com/Subsurface-divelog/subsurface/issues/345. The
menues where not translated. The basis of this error is a simple
typo in core/taxonomy.c where the classname was mis-spelled in the
QT_TRANSLATE_NOOP. In addition, to pull and translate the strings
from C code, the normal tr() does not work, and the functionality
from the gettextfromc class is used.

Fixes: #345

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-04-26 05:34:40 -07:00
Jan Mulder
9b5d3b60ab Do not carry po2 setpoint data over dive boundaries
The file static po2 value, used to set the setpoint data, was not re-initialized
at the parsing of a dive during import from the divecomputer. So, in one import session,
the po2 was transferred from one dive to the next, obviously resulting in weird bugs, due
to possible wrong po2 settings.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-04-24 07:51:12 -07:00
Dirk Hohndel
2182f00177 Reduce default verbosity
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-04-22 12:38:59 -07:00
Robert C. Helling
dfe5092222 Identify user provided notes in plain text in replan
This is another attept at the problem if identifying a potentially
user supplied text in the dive notes upon replannig a dive.

It gets rid of the user visable position markers (*!* and ***) and
cirumvents problems with mark-up by first converting the old notes
to plan text (assuming that user only enters plain text in the notes
field as we do in other places as well). Then the automatically added
part is identified by locating the disclaimer in the text (if the user
edited/delted the disclaimer or changed langue in between it is her
problem to manually delete the old plan).

Everything from the disclaimer on is deleted and replaced by the new plan.

If the disclaimer is not found, the new plan is appended to the old notes.
This way we make sure no information gets automatically deleted.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-04-20 10:57:47 -07:00
Jan Mulder
9b8fc9f64a Show % after Büllmanns GFs
2 strings in the planner output showed based on "Bühlmann ZHL-16B with GFLow = "
gradient factors without % after the factor. While this is fine for an
abbreviated form like GF 40/80, this looks strange for a verbose sentence like
the 2 corrected ones.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-04-20 10:57:11 -07:00
Miika Turkia
0bce84b09d Support for new DM5 blob format
Currently we do not know what the extra data in the sampleBlob is, but
the block size must be adjusted nevertheless.

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2017-04-20 10:55:19 -07:00
Miika Turkia
58a25d33ce Attempt latin1 parsing on import
We parse input XML using UTF-8 encoding by default. If this fails, try
latin1 instead.

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2017-04-18 18:13:05 -07:00
Stefan Fuchs
a5d54b04a7 Handle notes from planner
New strategy to identify old planner output in notes when
replanning a dive: Text anchors ("*!*" and "***") added for planner output

For backwards compatibility: If there is no anchor but an old table
delete everything.

Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-04-16 07:42:32 -07:00
Jef Driesen
f8203b8efe Cleanup some unnecessary include statements
Some of these header files are no longer necessary, and will be removed
from libdivecomputer in the near future.

Signed-off-by: Jef Driesen <jef@libdivecomputer.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-04-13 18:02:47 -07:00
Jef Driesen
241bd9aa15 Fix building against upstream libdivecomputer
The custom_serial.h header doesn't exist in upstream libdivecomputer.

Signed-off-by: Jef Driesen <jef@libdivecomputer.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-04-13 18:02:39 -07:00
Miika Turkia
e355037e20 Ignore empty cylinders on Cobalt import
It appears that Cobalt might include additional gas mixes, and only way
to determine what is used appears to be to ensure that start and end
pressures are greater than 0. One would assume there to be something
else available in the database, but I was not able to spot it.

Fixes #297

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2017-04-11 17:26:31 -07:00
Robert C. Helling
6afcbeef4d Move version and date around notes to save space
This prints this information in the header near
"Subsurface" where I guess at least the version information
belongs. Plus it saves a line.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-04-06 18:29:11 -07:00
Stefan Fuchs
c9c9b1b399 Add creation date and Subsurface version to planner output
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-04-06 18:29:11 -07:00
Dirk Hohndel
34a42d7f04 Shift fake tank pressures up by 30bar
This is a rather arbitrary value, intended to create actually valid
pressure values for Uwatec Memomouse users - since we treat 0bar as
invalid pressure value, this simply creates an arbitrary '30bar + delta'
to '30bar' consumption graph (since all the Memomouse devices give us is
the pressure delta that was used during the dive).

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-03-30 11:44:45 +02:00
Dirk Hohndel
09b5f9b99c Accept 0 as valid endpressure for Uwatec devices
Instead of delivering the actual start and end pressure, memomouse
gives you a start pressure that matches the delta between actual
start and end pressure, and an end pressure of zero. Who the heck
knows why it does that, but the information is better than nothing,
so we should accept it.

Fixes #286

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-03-29 14:00:16 +02:00
Robert C. Helling
1b744c7639 Always show notes when replanning
... as per popular request. Plus adding const keyword to constant
strings.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-03-28 13:31:45 -07:00
Robert C. Helling
d344779c47 Fix missing slash in markup
Reported-by: Stefan Fuchs
Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-03-28 13:31:45 -07:00
Robert C. Helling
eefa390e5f Handle notes in replan
Upon replanning a dive, we want to delete the old
dive plan in the notes and replace it with the actual.

This fixes a problem when we failed to detect the old plan due
to the deco model name appearing in the disclaimer that was used
as a marker for the notes.

This patch also adds translation markers for the deco model name strings..

Fixes #285

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-03-28 13:31:45 -07:00
Jan Mulder
bb31c77597 minimal pO2 threshold: split max threshold into min and max
Nothing really special here. Just a split of the only p02 max threshold into
a min threshold and max threshold, and the adaptation of the UI. Change of
translatable strings included.

ref: https://github.com/Subsurface-divelog/subsurface/issues/259

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-03-28 11:17:03 -07:00
Miika Turkia
1d0281c923 Fix a crash when git init fails
This can occur e.g. if directory permissions prevent one from writing to
the local cloud storage directory. (Such a crash was discussed on
mailing list.) The error message on GUI is misleading, claiming that
cloud connection failed...

Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
---
We probably should check the return value of other git operations as
well, but going for bare minimum for now.
2017-03-28 11:12:36 -07:00
Jeremie Guichard
597539ce39 Fix double to int truncation in C++ code
Wfloat-conversion enabled for C++ part of the code
Fix warnings raised by the flag using lrint

Original issue reported on the mailing list:
The ascent/descent rates are sometimes not what is expected.
E.g. setting the ascent rate to 10m/min results in an actual
ascent rate of 9m/min.
This is due to truncating the ascent rate preference,
then effectively rounding up the time to reach each stop to 2s intervals.
The result being that setting the ascent rate to 10m/min
results in 20s to ascend 3m (9m/min), when it should be exactly 18s.

Reported-by: John Smith <noseygit@hotmail.com>
Reported-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
2017-03-24 09:39:25 -07:00
Jan Mulder
d6003209d6 Subsurface-mobile: do send decimal GPS to Google
Sending nicely readable formatted coordinates to Google Maps does not
result in a correctly positioned map. Google likes unreadable
decimal format.

Little hacky solution. Added a gps_decimal attribute, populate that
with the standard function for format a coordinate to string, but
reset the preferences value temporarly so that it always converts it
to decimal style.

Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
2017-03-24 09:35:00 -07:00
Stefan Fuchs
258aa70d04 Add 10l 200bar and 232bar cylinder
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-20 21:38:20 -07:00
Stefan Fuchs
6f21d2749e Tests for minimum gas
Add automatic tests in TestPlan for minimum gas:
- Copy minimum gas result (pressure) to diveplan.
- Add cylinder size and working pressure for bottom gas to every dive in TestPlan
  Hint: Unrealistic cylinder sizes (100l, 200l) have to be used for the very long and deep dives in TestPlan
- Add minimum gas check for every dive
- Add two additional test dives in TestPlan which produce sane minimum gas results with 24l tank
  Hint: Deco check for these new dives is commented out at the moment

Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-19 17:11:52 -07:00
Stefan Fuchs
ce420d7720 Prevent overflow in minimum gas calculation
For the "crazy" long and deep dives in "TestPlan" an overflow happened here.
Rearranged the calculation to have more margin.

Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-19 17:11:52 -07:00
Martin Měřinský
3d89914633 Use GFLow, GFHigh (not GFlow, GF Low, GF low). 2017-03-13 10:28:06 -07:00
Martin Měřinský
4f96afff99 Safetystop > Safety stop 2017-03-13 10:28:06 -07:00
Lubomir I. Ivanov
b2c13f4178 qtserialbluetooth.cpp: mark qt_serial_get_transmitted() as unused
The function is unused, to silence the warning add the "unused"
GCC attribute to the function declaration.

Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-03-12 09:19:08 -07:00
Lubomir I. Ivanov
7bfeb95613 planner.c: fix a couple of float -> int cast warnings
Use lrint() to fix both:

1)
core\planner.c:902:23: warning: conversion to 'int' from 'doub
le' may alter its value [-Wfloat-conversion]

2)
core\planner.c:907:21: warning: conversion to 'int32_t' from '
double' may alter its value [-Wfloat-conversion]

Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-03-12 09:19:06 -07:00
Lubomir I. Ivanov
bcad5ddd38 Only enable -Wmissing-field-initializers for Clang
The following pragma is Clang specific:

It produces a warning:
warning: ignoring #pragma clang diagnostic [-Wunknown-pragmas]

Only enable it for Clang by checking the __clang__ macro.

Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-03-12 09:18:59 -07:00
Dirk Hohndel
11a8ab6b1b Undo one lrint change
As here we actually do want the rounded floatingpoint value.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-03-11 08:52:38 -08:00
Dirk Hohndel
16276faa45 Remove unused static functions
These became obsolete with commit e2bbd0ceec ("Rewrite cylinder
merging code from scratch").

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-03-11 08:51:16 -08:00
Dirk Hohndel
a733aaf967 Remove unused variable
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-03-11 08:43:24 -08:00
Dirk Hohndel
08284275e7 Merge branch 'master' of https://github.com/dje29/subsurface 2017-03-11 08:41:41 -08:00
Dirk Hohndel
b8b858a9d2 Fix build after merges
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-03-11 08:38:24 -08:00
Martin Měřinský
2784ce175a Dive No. > Dive # 2017-03-11 08:09:07 -08:00
Martin Měřinský
c4310396a9 divespot > dive spot 2017-03-11 08:09:07 -08:00
Martin Měřinský
9dccf50396 divelog > dive log 2017-03-11 08:09:07 -08:00
Martin Měřinský
f24e0ba5ec divemode > dive mode 2017-03-11 08:09:07 -08:00
Martin Měřinský
95d5771513 We use 'setpoint' in UI. Use it also for documentation and comments. No semantic change. 2017-03-11 08:09:07 -08:00
Martin Měřinský
dcf2542215 Use abbreviations with dots. 2017-03-11 08:09:07 -08:00
Martin Měřinský
a9d361574e unkn > unknown 2017-03-11 08:09:07 -08:00
Martin Měřinský
9b93397ec2 SAC: %.*f%s/min versus SAC:%.*f %s 2017-03-11 08:09:07 -08:00
Robert C. Helling
eae4bd82a5 Change type of divedatepoint.depth to depth_t
... for consistency, while we are at it.

There are still some internal depth variables which are ints
somebody might take a go at those.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-03-11 08:03:25 -08:00
Robert C. Helling
295b1b78d8 Make depth conversion work for negative depths
This is needed in the altitude pressure conversion as there
negative altitudes are possible (for diving in the netherlands
or the Dead Sea).

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-03-11 08:03:25 -08:00
Stefan Fuchs
8a4d3876d6 Disable minimum gas calculation for recreational mode
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-11 08:01:35 -08:00
Stefan Fuchs
7f8c3592ce Minimum gas calculation - Calculations and UI parameters
Add minimum gas calculation to planner output.
Add the two UI parameters prefs.sacfactor and prefs.problemsolvingtime.
Connect UI signals and slots for recalculation of diveplan.

Disable minimum gas calculation if there was already a warning before.
If minimum gas result is larger then cylinder start pressure give warning message instead of result.

Add line break before pO2 warnings but only if warnings exist.

Signed-off-by: Joachim Ritter <jritter@bitsenke.de>
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-03-11 08:01:35 -08:00
Jeremie Guichard
2b06a0b223 Fix potential double/float to int rounding errors
Not using lrint(f) when converting double/float to int
creates rounding errors.
This error was detected by TestParse::testParseDM4 failure
on Windows. It was creating rounding inconsistencies
on Linux too, see change in TestDiveDM4.xml.

Enable -Wfloat-conversion for gcc version greater than 4.9.0

Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
2017-03-09 23:07:30 +07:00
Jeremie Guichard
406e4287eb Change calls to rint into lrint avoiding conversion warnings
Using gcc option "-Wfloat-conversion" is useful to catch
potential conversion errors (where lrint should be used).
rint returns double and still raises the same warning,
this is why this change updates all rint calls to lrint.
In few places, where input type is a float, corresponding
lrinf is used.

Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
2017-03-08 14:04:17 +07:00
Martin Měřinský
d6bfcd5245 In weights table 'weight' is redundant and no used for other types. 2017-03-07 16:22:27 -08:00
Martin Měřinský
186a80fffe Enable translate 'All' in yearly statistics. 2017-03-07 16:22:03 -08:00
Dirk Hohndel
e9debdf281 Add helper to parse duration text
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-03-04 12:16:49 -08:00
Martin Měřinský
b14301a84c heartrate, heartbeat > heart rate 2017-03-04 12:08:17 -08:00
Martin Měřinský
fccfb968c1 Consistent 'salt water' versus 'fresh water'. 2017-03-04 12:08:17 -08:00
Dirk Hohndel
a3a23f63a6 Add subsurface_stat for Mac
Which is also used on iOS.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-02-24 01:14:39 -08:00
Jeremie Guichard
5ed93a9d9e Fix "Load/Save to cloudstorage" for non-ASCII user names
On Windows that would fail because stat() doesn't deal well with our
utf8 strings.

Added new subsurface_stat() portability function to replace stat().
Added Windows implementation of subsurface_stat() using wstat(),
with conversion to ut16 of the inputed path.
Other platform implementations (linux, android) make use of the normal stat().

Added non ASCII test case in TestGitStorage::testGitStorageLocal()

Signed-off-by: Jeremie Guichard <djebrest@gmail.com>
2017-02-24 01:10:22 -08:00
Dirk Hohndel
da50bb1ae5 Dive merge: don't pick an empty dive site
When merging, we should treat an empty dive site (which will be deleted
on save) the same as not having a dive site.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-02-21 18:22:56 -08:00
Robert C. Helling
dbd99f706e Many filenames are const strings
So we can use string constants for those

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-21 13:14:56 -08:00
Stefan Fuchs
b39b641a05 Translate names of additional dive events and nicer format info box text
Enable translation for a few additional internal dive events.
Ensure that all event names in datatrak.c are collected for translation.
Ensure that for gaschange in profile info box the "cyl." string is also translated.

Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-02-21 13:11:19 -08:00
Martin Měřinský
c272c57b5e Unknow > Unknown 2017-02-21 07:03:10 -08:00
Linus Torvalds
2e77a22e2c Fix dive site string merging
If the second dive site doesn't have a particular string, but the first
one does, we did the wrong thing and created a result string like

   (first dive site string) or ((null))

which is not useful.  We should just use the first dive site string
as-is.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-19 17:38:34 -08:00
Robert C. Helling
bd89e33e76 Fix typo in saturation/desatureation rates
This patch eliminates the difference between the saturation and
desaturation rates. This was probably once meant as a conservative
measure but the desaturation rate was increased rather than the
saturation rate (which is probably a typo, as reported by Stefan).

Since there is no good basis for this anyway, this patch sets
both factors to 1.0 (and if accepted the whole factor business
should be removed).

This makes our deco times slightly longer. But in the past,
we had introduced a 1.2% fudge factor in the critical radius
calculation to add conservatism and match the benchmark better.

Removing this fudge factor brings us close to the benchmarks.
Expected test values updated.

Reported-by: Stefan <sjti@gmx.net>
Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-19 15:29:40 -08:00
Robert C. Helling
dc55ee4a23 Update exif.cpp from upstream
Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-19 15:29:40 -08:00
Linus Torvalds
4a550e4d7d Properly handle dive sites loaded from XML
We used to always create a new dive site structure when loading dive
site data from XML.

That is completely bogus, because it can (and does) create duplicate
dive sites with the same UUID.  Which makes the whole UUID pointless.

So instead, look up the existing dive site associated with the UUID
loaded from the XML, and try to merge the data properly if we already
had dive site information for that UUID.

Reported-by: Alessandro Volpi <volpial@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-19 15:23:46 -08:00
Linus Torvalds
fc55620d2d dive merging: merge water temperature too, not just air temperature
I have no idea why we only merged air temperatures.  But it was very
explicit (even the function doing the merging was named
"merge_airtemp()"), and water temperatures were left alone.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-19 15:23:46 -08:00
Linus Torvalds
0cf4104dc6 Handle negative dates (before the epoch) better
The Qt model sorting for the dive date was using a unsigned number,
which doesn't work for dates before 1970.

Also, the dive date parsing got the year 1900 wrong.  Not that we really
care, because other parts of date handling will screw up with any date
before the year 1904.  So if you claim to be diving before 1904, you get
basically random behavior.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-17 15:08:38 -08:00
Linus Torvalds
83aff9f777 Fix crash when merging dives with a missing dive computer model
The test for the dive being a planned dive was completely bogus:

 - it should use "same_string()" which correctly checks for NULL

 - the string it checks for is obviously spelled wrong anyway.

Reported-by: Alessandro Volpi <volpial@gmail.com>
Fixes: a031dbbbd ("When merging planned dives keep all cylinders")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-15 21:46:15 -08:00
Robert C. Helling
e31714d9b2 Set up gaslist only in the beginning of diveplan
In the beginning of the diveplan, divedatapoints of zero
duration indicate available gases with the depth giving
the suggested switch depth. Zero-duration datapoints in
the middle of the dive do not have this meaning and should
thus be ignored when composing the gaslist.

The tests should have these gas defining segments in the beginning.

This fixes a problem when replanning a dive that would change
to random gases during deco.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-11 08:31:42 -08:00
Robert C. Helling
057419fa85 Always show manually added gaschanges in notes
In the manually entered part, we dont wait until the next stop.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-11 08:31:42 -08:00
Robert C. Helling
032c3258ed Reset VPM-B state between repetitive dives
This resets the maximum crushing pressures and the maximal
ambient pressure between repetitive dives to prevent anomalies
that a dive produces a shorter deco when following another one
than without.

Reported-by: sfuchs@gmx.de
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-02-10 06:41:24 -08:00
Linus Torvalds
0e7d8993a2 Make cylinder merging a bit more careful
This makes some further updates to the new cylinder merging code:

 - avoid re-using the cylinder if the usage type (OC/diluent/O2) is
   different between the two dives, even if the gasmix might be the
   same.

 - avoid re-using a cylinder if the user has manually added pressure
   data for it (and the pressures don't match)

 - when deciding to reuse a cylinder, make sure that we merge as much of
   the type information as makes sense.

This will potentially result in more cylinders that might need manual
cleanup, but at least we won't be throwing out user data.  And in most
cases where merging happens, none of this is an issue (because the data
comes fresh from a dive computer, and won't have been manually edited to
trigger the new rules).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-09 21:30:49 -08:00
Linus Torvalds
e2bbd0ceec Rewrite cylinder merging code from scratch
The old cylinder merging code depended on the preferred dive having all
the cylinders, and the newly merged dive was just forced to pick from
that existing set of cylinders.

That worked ok if you have a "main" dive computer that you have all the
gases programmed for, and you download that first, and then you download
any secondary data later.

But it completely messed up if the second dive computer had gases that
the first one didn't know about, and just basically ended up doing
random things.

This rewrites the whole thing to actually try to create a union of the
two sets of cylinders when merging, with sane matching so that if the
cylinders match you won't get duplicates.

Miika Turkia hit this when he only used one gas, but had several gases
defined in his OSTC that he downloaded after his Vyper (with had just
the single gas defined).

This should fix that case (at least it does for my xml merging test-case
that showed the same problem after some munging).

Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-09 21:30:49 -08:00
Dirk Hohndel
f6cd21ce5a Finish removal of informational_prefs
And make export-html build again.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-02-05 12:44:11 -08:00
Joakim Bygdell
0277d5aacc Merge informational_prefs into git_prefs
There is no need to have two variables for the same purpose.

[Dirk Hohndel: changed to keep the two separate functions as otherwise
               we no longer parse existing repos successfully]

Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-02-05 12:29:51 -08:00
Joakim Bygdell
11dcae436e MOBILE: Read profile settings from git
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
2017-02-05 11:59:47 -08:00
Joakim Bygdell
d4dbd0bee7 Save profile settings to git
In order to streamline the view between desktop and mobile we need to save
selected profile related settings to git.

Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
2017-02-05 11:59:47 -08:00
Robert C. Helling
6518b0db45 Treat gaschanges at 1s as inital gas use
When the first leg in the planner is not cylinder 0, a gaschange
event at t=1s is inserted. In the profile, we should treat that
as inital gas, so no pressure information is printed for cylinder 0
that is used nominally for one second.

This fixes a problem reported by Willem.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-04 07:09:35 -08:00
Stefan Fuchs
cd38cda186 Bugfix planner output formating (linebreaks)
Changed the markup with <div> and <br> tags of the planner output in
a way that is is a good compromise for both displaying in UI and
printing.

Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
2017-02-04 07:06:29 -08:00
Robert C. Helling
855995191c Don't do strcmp on NIL pointer
This is what we have same_string() for...

This prevents a crash when saving a dive in the planner.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-02-03 15:04:51 -08:00
Dirk Hohndel
db7290a915 Same typo, two more times
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-02-03 15:01:15 -08:00
Dirk Hohndel
a959e437a9 Fix typo
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-02-03 09:35:01 -08:00
Lubomir I. Ivanov
4a894e0713 Win32: add the --win32log option to log stdout and stderr to files
Adding --win32log as the first command line option on Windows
will now log all stdout and stderr output to the files
subsurface_err.log and subsurface_out.log in the working directory.

This change required a new argument 'bool logfile' to be added to:
subsurface_console_init() which is defined in all platform files
(linux.c, macos.c, etc.)

Example usage:
subsurface.exe --win32log -v -v -v

Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
2017-02-03 09:24:42 -08:00
Robert Helling
5aa9c6fa1b Do not count gas used in planned dives for statistics
This is important if in one dive we have the real dive and
a planned version of the dive as different computers using
different sets of cylinders.

[Dirk Hohndel: an early version of this was mistakenly pushed out
               by me; I reverted that and added this commit since
               fixing things up as I had done for the other two
               patches made things nearly unreadable]

Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-02-03 07:45:24 -08:00
Robert Helling
67de8f3a49 Correct: Handle more tanks than gasmixes
When Suunto Vytecs are used in gauge mode they don't record gasmixes.
If a tank pressure sensor is present they nevertheless record the
pressures. This patch handles this situation by assuming the tanks
contain air (and warning the user about this).

[Dirk Hohndel: I had mistakenly pushed out an earlier version of this
               commit, so this fixes things up to the final version]

Reported-by: antonnorth@gmail.com
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-02-03 07:43:00 -08:00
Robert Helling
8a8315d6fe Correct "When merging planned dives keep all cylinders"
When merging a real dive with a planned dive (for comparison),
we should not try to be clever in merging similar cylinders,
rather keep the union of both cylinder sets as the two versions
of the dive might differ in exctly which gas and how much of it
was used.

Increase MAX_CYLINDERS to 20 to make room for this. We warn if we
exceed this number.

[Dirk Hohndel: I had mistakenly pushed out an earlier version of this
               commit, so this fixes things up to the final version]

Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-02-03 07:41:35 -08:00
Dirk Hohndel
08c42813e5 Revert "In statistics, ignore gas use of planned dives"
This reverts commit 1d8662006c.

Mistakenly pushed to master

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-02-03 07:31:03 -08:00
Dirk Hohndel
414d7f2632 Deal with some of the whitespace issues in planner.c
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-02-03 03:10:57 -08:00
Stefan Fuchs
fbaeeec807 Print SAC values from prefs in diveplan
Print the SAC values from preferences into the diveplan.
These are the values used for calculation of gas consumption.

Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-02-03 02:45:58 -08:00
Stefan Fuchs
a1c51256b2 Add ATM pressure and altitude to diveplan
Print the ATM pressure and the altitude used for calculation into the resulting diveplan.
Moved this info together with the deco model info below the runtime table.
There is one drawback in this implementation: Altitude will be recalculated from surface pressure and therefore may differ slightly from altitude entered in the UI.

Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-02-03 02:45:30 -08:00
Robert C. Helling
1d8662006c In statistics, ignore gas use of planned dives
When merged with real dives, those would double count otherwise.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-02 12:37:24 -08:00
Robert C. Helling
a031dbbbd8 When merging planned dives keep all cylinders
When merging a real dive with a planned dive (for comparison),
we should not try to be clever in merging similar cylinders,
rather keep the union of both cylinder sets as the two versions
of the dive might differ in exctly which gas and how much of it
was used.

Increase MAX_CYLINDERS to 20 to make room for this.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-02 12:36:08 -08:00
Robert C. Helling
99595542ec Handle more tanks than gasmixes
When Suunto Vytecs are used in gauge mode they don't record gasmixes.
If a tank pressure sensor is present they nevertheless record the
pressures. This patch handles this situation by assuming the tanks
contain air (and warning the user about this).

Reported-by: antonnorth@gmail.com
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-02-02 12:35:58 -08:00
Robert C. Helling
bb86d13546 Initialize the surface time
Otherwise we return garbage when there is no dive in the dive list.

Closes #184

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-02-01 14:43:27 -08:00
Robert C. Helling
c1dc0c9ce0 Allow user to disable a cylinder in planner
In the cylinder table, the last column ("use") always showed
OC-GAS. Editing was enabled, but the user had to guess to enter
a small integer meaning dilluent or CCR oxygen cylingder. I guess,
nobody has ever done that.

This patch makes this column clickable. A click toggles if the cylinder
is used for planning or not. This wait it is much easier to investigate
the consequences of gas loss on a plan.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-01-23 22:11:51 -08:00
Dirk Hohndel
b15b3c195c QML UI: allow magic phrase for multiple buddies to be localized
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-01-22 18:20:03 -08:00
Linus Torvalds
e1ee577c4f Make event string translation when downloading from libdivecomputer more obvious
We had hardcoded the exact translation of the event numbers.  They
haven't changed (although we did have what appears to be a spurious
entry for "non stop time" at the end that libdivecomputer doesn't have
an enum for).

Instead, use an explicit array index initializer array, so that it's
obvious that the two match up (and if the sample event numbers ever
change, we should cope with it gracefully).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-17 09:15:50 -08:00
Linus Torvalds
fe5f15bdc5 Add support for libdivecomputer using DC_SAMPLE_GASMIX
New libdivecomputer versions use DC_SAMPLE_GASMIX to indicate a gas
change (which contains the cylinder index we're changing to) rather than
SAMPLE_EVENT_GASCHANGE*.

Unlike the old GASCHANGE model, and despite the name, DC_SAMPLE_GASMIX
does not actually say what the mix is, it only specifies a cylinder
index.  We had already extended SAMPLE_EVENT_GASCHANGE2 to have the
cylinder index in the otherwise unused "flags" field, so this is not all
that different from what we used to do.

And subsurface internally already had the logic that "if we know what
the cylinder index is, take the gas mix from the cylinder data", so
we've already been able to transparently use _either_ the actual gas mix
or the cylinder index to show the event.

But we do want to make it an event rather than some sample data, because
we want to show it as such in the profile.  But because we are happy
with just the cylinder index, we'll just translate the DC_SAMPLE_GASMIX
thing to the SAMPLE_EVENT_GASCHANGE2 event, and nothing really changes
for subsurface.

libdivecomputer has made other changes, like indicating the initial
cylinder index with an early DC_SAMPLE_GASMIX report, but we've seen
that before too (in the form of early SAMPLE_EVENT_GASCHANGE events), so
that doesn't really end up changing anything for us either.

HOWEVER, one thing that is worth noticing: do *not* apply this patch and
then use an old libdivecomputer library that sends both the
DC_SAMPLE_GASMIX samples _and_ the deprecated SAMPLE_EVENT_GASCHANGE
events.  It will all *work*, but since subsurface will take either,
you'll then get duplicate gas mix events.

It's not like that is in any way fatal, but it might be a bit confusing.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-16 17:45:00 -08:00
Robert C. Helling
7725842383 Use real gas compressibility in planner
Modify formluas for gas use to take into account the
compressibility correction for real gases. This introduces
also the inverse formula to compute the pressure for a given
amount of gas.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-01-16 03:17:40 -08:00
Dirk Hohndel
1ab6e7fc8a Prevent crash on Mac when typing comma in GPS coordinates field
Our attempt to skip any white space after the comma causes an ASSERT (strangely
only on Macs).

This closes #158

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-01-14 09:09:58 -08:00
Linus Torvalds
638e7fb28f Add cylinder equipment tooltips with gas volume
This adds tooltips for the equipment tab for each cylinder, showing the
amount of gas used.

When you mouse over the size and working pressure fields, the tooltip will
show the amount of gas used (along with start and end gas volumes). And
when you mouse over the start and end pressures, it will show the start
and end gas volumes, and the Z factor used.

I started doing this because of the gas volume questions in the last day
or two (and a few from a few weeks ago). When even Robert Helling starts
wondering about the effects of compressibility on the SAC calculation, our
numbers are clearly too opaque.

With these tooltips, at least you can see what went into the used gas
calculations, instead of having to add debugging options to print out Z
factors.

[ This patch also adds a "rint()" to get the rounding right in the
  gas_volume() function.  Although rounding to the nearst milliliter
  really doesn't matter, it's the right thing to do after doing FP
  calculations ;^]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-12 14:17:09 -08:00
Anton Lundin
48b2b3d0b3 ostctools: Add support for profile version 0x24
Signed-off-by: Anton Lundin <glance@acc.umu.se>
2017-01-12 14:15:53 -08:00
Anton Lundin
983561b353 ostctools_import: Switch to using dc_parser_new2
Instead of creating the individual parsers, and keeping track of their
arguments, this just uses the "new" dc_parser_new2 function ment for
buffer parsing.

Signed-off-by: Anton Lundin <glance@acc.umu.se>
2017-01-12 14:15:53 -08:00
Anton Lundin
70e2404492 Stop accessing the internals of dc_descriptor_t
This removes our own declaration of dc_descriptor_t and all our accesses
to its internals, and switches to use the libdivecomputer functions to
access those instead.

Signed-off-by: Anton Lundin <glance@acc.umu.se>
2017-01-12 14:15:53 -08:00
Anton Lundin
d11dfd2f45 ostctools: Correct argument order to get_descriptor
This corrects the argument order, which was changed back in
00629c861c, but not on this place. Whups.

Signed-off-by: Anton Lundin <glance@acc.umu.se>
2017-01-12 14:15:53 -08:00
Miika Turkia
aaa46c2465 Add some additional parameters to help text
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2017-01-06 20:44:02 -08:00
Robert C. Helling
935734100f Rename prefs.deco_mode to prefs.planner_deco_mode
This is to avoid confusion with planner.display_deco_mode.
When accessing the "current deco mode" use the decoMode()
helper function.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-01-06 20:43:23 -08:00
Robert C. Helling
bb4bf639c3 Fix deco_mode confusion
We have two prefernces determining the deco_mode (BUEHLMANN vs VPMB
vs RECREATIONAL): One for the planner (deco_mode) and one for
displaying dives (display_deco_mode). The former is set in the planner
settings while the latter is set in the preferences.

This patch clears up a confusion which of the two to use by introducing
a helper function that selects the correct variable.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-01-06 20:43:23 -08:00
Robert C. Helling
43599742a3 Display surface interval in diveplan
...instead of just stating "repetitive dive". As requested by
a user.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
2017-01-03 22:28:18 -08:00
Miika Turkia
8766054581 Hooking up av1.xslt for log import
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
2016-12-31 09:56:08 +02:00
Robert C. Helling
10b8bda662 Fix picture hashing logic for pictures on the web.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
2016-12-30 19:43:00 +01:00
Anton Lundin
38474f2d47 android: Add a subsurface_user_is_root for android
This is to compile the desktop ui for android

Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-12-28 22:40:18 -08:00
Anton Lundin
3b884c2e7c Use get_descriptor instead of hard-coded switch's
This starts using the newly lifted out get_descriptor in configure dive
computer, instead of previously hard-coded out of date
switch-statements.

Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-12-28 22:40:18 -08:00
Anton Lundin
00629c861c Rename ostc_get_data_descriptor to get_descriptor
This renames and cleans up ostc_get_data_descriptor into get_descriptor,
for more generic use.

Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-12-28 22:40:18 -08:00
Anton Lundin
db8e786f85 Lift ostc_get_data_descriptor out from ostctools.c
This is for later reuse of that function in other source files.

Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-12-28 22:40:18 -08:00
Tomaz Canabrava
27b4ef321a Correctly open the resource file
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-12-27 08:27:21 -08:00
Robert C. Helling
3e4ea9e084 Get rid of debug messages
...that managed to sneak in in a previous commit.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-12-26 13:09:05 -08:00
Robert C. Helling
c1ef59c540 Indicate a repetitive dive in the diveplan
Fixes #1095

Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-12-26 12:47:57 -08:00
Robert C. Helling
1ab5db3726 Empty image hashes are not valid
I don't know how those arose in the first place, but an
empty QByteArray is never a valid hash value for an image. So
we should not store those in our translation tables and also
get rid of them when loading the tables from disk.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-12-04 05:37:16 +09:00
Robert C. Helling
f03acb9e9a Fix effective GFs in notes
This patch fixes two bugs:

1) It first computes the effective gradient factors and then
composes the notes with the diveplan rather than the other way
around.

2) It does not try to fit a line through a single point.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-12-04 05:32:08 +09:00
Robert C. Helling
4d0d37b690 Show effective gradient factors for VPMB-plans
For each stop, this computes an effective gradient factor
that gives the same ceiling. Then, it does linear regression
to find values for GFlow and GFhigh that give a similar deco
profile.

Note that this optimises the average gradient factor. The
runtime however depends strongly at the gradient factor at
the last depth. So we don't necessarily to get the runtime
right.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-24 09:59:42 +09:00
Robert C. Helling
d1a0655613 Show runtime on top of diveplan
This is central information when planning a dive but often
scrolled out of the window for longer plans. So print it on
the top.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-24 09:59:32 +09:00
Robert C. Helling
20e211d337 Only consider non-zero average depth for statistics
Upon importing dives, the average depth can be undefined which we store as 0.
This zero should not contribute when computing the average depth for
the (yearly) statistics, only dives with average depth set now contribute.

Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-15 03:25:46 -08:00
Dirk Hohndel
9006802f72 Clean up some warnings in file.c
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-09 06:33:45 -08:00
Miika Turkia
66d9cc788c Parse multiple dives from single DL7 log file
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-09 06:29:24 -08:00
Anton Lundin
2497ecf16d configure ostc3: Correct typos
This fixes a copy-paste error made by me that caused
tempSensorOffset to first be set the wrong way and then overridden by
pressureSensorOffset.

Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-07 21:08:28 -08:00
Tomaz Canabrava
37e3e7e69a Deco mode for plannining is not deco mode for showing
We had (in the wrong place, imo) a new feature that
should differentiate the different deco_modes, you could
plan your dive in buelhman and see it in vpm-b, for instance
but both of them accessed the same pref.

Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-01 09:41:17 -07:00
Tomaz Canabrava
c110b4a238 More preference handling fixes
Remove a few uneeded lines and add more loading code for
the preferences.

Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-01 09:40:43 -07:00
Tomaz Canabrava
ce8f621623 on first run, use system language.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-01 09:39:45 -07:00
Tomaz Canabrava
5da23065d6 Use default prefs for the prefs that where missing
This patch fixes all the cases that I didn't checked for
the default prefs.

Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-11-01 09:39:17 -07:00