Use string literals to communicate with QML.
Instead of passing arounds enum/int value, it seems easier to pass string literals to QML and have that code respond to those
Signed-off-by: Jan Iversen <jani@apache.org>
Write a test program to test the log tab in the preferences main menu
I am a bit skeptical about the accuracy of the last section that
delas with testing signals.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a tab for dive log - related preferences.
A suitable test programs is still required.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a companion for the new Media tab in the Preferences UI
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the preference settings dealing with thumbnails (currently under
General preferences and Profile preferences) and put them in a newly-created
Media preference tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the "Show unused cylinders" checkbox (Profile tab) and the
"Set default cylinder" qTextEdit box (General tab) and put them in a
separate and new Equipment tab. This sounds like a simple task but,
as can be seen from the files changed, was actually a complex matter.
Adapt the existing test programs (General and TechDetails) for creating
a test program that tests parts of the Equipment tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declarations of the "report_error()" and "set_error_cb()"
functions and the "verbose" variable to errorhelper.h.
Thus, error-reporting translation units don't have to import the
big dive.h header file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions were spread out over dive.c and divelist.c.
Move them into their own file to make all this a bit less monolithic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make dive.h a bit slimmer. It's only a drop in the bucket - but at
least when modifying tag functions not the *whole* application is
rebuilt anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The Information tab shows the atmospheric pressure. Make this value editable
and also ensure that changes to it are undo-able.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
The application state was encoded in a QByteArray. Thus, there was
no compile-time checking. Typos would lead to silent failures.
Turn the application state into an enum. Use the enum-class construct,
so that the values don't polute the global namespace. Moreover,
this makes them strongly typed, i.e. they don't auto-convert to
integers.
A disadvantage is that the enums now have to be cast to int
explicitly when used to index an array.
Replace two hash-maps in MainWindow to arrays of fixed sizes.
Move the application-state details into their own files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The handling of dive site merging changed and therefore the tests
have to be adapted.
1) Dive sites are recognized as identical based on their name.
Therefore, give the dive sites that should be merged the same name.
2) The dive site id of the first imported dive is kept. Thus,
merge and reverse merge produce two different output files.
Create a second file reflecting that fact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a dive site table to each dive site to keep track of dives
that have been added to a dive site. Add two functions to add
dives to / remove dives from dive sites.
Since dive sites now contain a dive table, the order of includes
had to be changed: "divesite.h" now includes "dive.h" and not
vice-versa. This caused some include churn.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declaration of these functions to "file.h" and "parse.h"
according to the translation unit they are defined in. Thus, not
all users of "dive.h" have to suck in "sqlite3.h".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As opposed to dive trips, dive sites were always directly added
to the global table, even on import. Instead, parse the divesites
into a distinct table and merge them on import.
Currently, this does not do any merging of dive sites, i.e. dive
sites are considered as either equal or different. Nevertheless,
merging of data should be rather easy to implement and simply
follow the code of the dive merging.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To extend the undo system to dive sites, the importers and downloaders
must not parse directly into the global dive site table. Instead,
pass a dive_site_table argument to parse into.
For now, always pass the global dive_site_table so that this commit
should not cause any functional change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To enable undo of dive site functions, it is crucial to work
with different dive site tables. Therefore add a dive site table
parameter to dive site functions. For now, always pass the global
dive site table. Thus, this commit shouldn't alter any functionality.
After this change, a simple search for dive_site_table reveals all
places where the global dive site table is accessed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This allows calling ctest from the main build directory instead of having to
change one level down. As a bonus the unittests now show up in my KDevelop so I
can directly run them from the IDE.
Signed-off-by: Rolf Eike Beer <eike@sf-mail.de>
These two member functions were never used, but cause frequent
recompilation of the qPref.cpp file. Remove them for now until
their usefulness becomes evident.
These were the only functions tested in test_qPref.qml. Therefore
remove this test-file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
process_imported_dives() takes four boolean parameters. Replace these
by flags. This makes the function calls much more descriptive. Morover,
it becomes easier to add or remove flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If this flag is set, dives that are not assigned to a trip will
be assigned to a new trip. This flag is set if the user checked
"add to new trip" in the download dialog of the desktop version.
Currently this is a no-op as the dives will already have been
added to a new trip by the downloading code. This will be removed
in a subsequent commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Split the process_imported_dives() function in two:
1) process_imported_dives() processes the dives and generates
a list of dives and trips to be added and removed.
2) add_imported_dives() calls process_imported_dives() and
does the actual removal / addition of dives and trips.
The goal is to split preparation and actual work, to
make dive import undo-able.
The code adds extra checks to never merge into the same
dive twice, as this would lead to a double-free() bug.
This should in principle never happen, as dives that
compare equal according to is_same_dive() are merged
in the imported-dives list, but perhaps in some pathologival
corner-cases is_same_dive() turns out to be non-transitive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing log-files we generally want to merge trips. But
when downloading and the user chose "generate new trip", that
new trip should not be merged into existing trips.
Therefore, add a "merge_all_trips" parameter to process_imported_dives().
If false only autogenerated trips [via autogroup] will be merged.
In the future we might want to let the user choose if trips
should be merged when importing log-files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old way of merging log-files was not well defined: Trips
were recognized as the same if and only if the first dives
started at the same instant. Later dives did not matter.
Change this to merge dives if they are overlapping.
Moreover, on parsing and download generate trips in a separate
trip-table.
This will be fundamental for undo of dive-import: Firstly, we
don't want to mix trips of imported and not-yet imported dives.
Secondly, by merging trip-wise, we can autogroup the dives
in the import-data to trips and merge these at once. This will
simplify the code to decide to which trip dives should be
autogrouped.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To allow parsing into arbitrary trip_tables, add the corresponding
parameter to the parsing functions and the parser state. Currently,
all callers pass the global trip_table so there should be no change
in functionality. These arguments will be replaced in subsequent commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, when selecting "Load media files even if time does not
match the dive time", the media are added to *all* selected dives.
Instead add it to the closest dive.
This seems like the less surprising behavior. Of course now if the
user really wants to add a media file to multiple dives, they will
have to do it manually.
To avoid a messy interface, this is solved by moving the iterate-
over-selected-dives loop to the core. Thus, a helper-function can
be made local to its translation unit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This tests for the planner getting the gases in the
manually entered part of the dive wrong (as here: from
incorrect value returned by get_gasmix_at_time.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Instead of having people treat latitude and longitude as separate
things, just add a 'location_t' data structure that contains both.
Almost all cases want to always act on them together.
This is really just prep-work for adding a few more locations that we
track: I want to add a entry/exit location to each dive (independent of
the dive site) because of how the Garmin Descent gives us the
information (and hopefully, some day, other dive computers too).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With removal of the git_local_only from the preferences (see
ae653703a5), the users choice, in the mobile app, was not
stored any more in between sessions. This resulted in issue
1725.
So, in order to store that user preference, we need a new
preference. This is added here, but its not yet hooked up
in the app yet. This deals only with the preference handling.
And adapted tests are included.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
process_imported_dives() is more efficient for downloaded than for
imported (from a file) dives, because it checks only the divecomputer
of the first dive.
This condition is checked via the "downloaded" flag of the first
dive. Instead, pass an argument to process_imported_dives().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dives are now in all cases imported via distinct dive_tables.
Therefore the "preexisting" marker is useless. Remove.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dives were directly imported into the global dive table and then
merged in process_imported_dives(). Make this interface more flexible,
by passing an independent dive table.
The dive table of the to-be-imported dives will be sorted and merged.
Then each dive is inserted in a one-by-one manner to into the global
dive table.
This actually introduces (at least) two functional changes:
1) If a new dive spans two old dives, it will only be merged to the
first dive. But this seems like a pathological case, which is of
dubious value anyway.
2) Dives unrelated to the import will not be merged. The old code
would happily merge dives that were not even close to the
newly imported dives. A surprising behavior.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In d815e0c947 a dive_table pointer
was added to the parsing functions to allow parsing into tables
other than the global dive table. This will be necessary for undo of
import and implementation a cleaner interface. A few cases, notably
CSV and proprietary formats were forgotten.
Implement parsing into arbitrary tables also for these cases.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A few of these prototypes were already in import-csv.h.
Put them in an 'extern "C" { ... }' block.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
process_dives() is used to post-process the dive table after loading
or importing. The first parameter states whether this was after
load or import.
Especially in the light of undo, load and import are fundamentally
different things. Notably, that latter should be undo-able, whereas
the former is not. Therefore, as a first step to make import undo-able,
split the function in two versions and remove the first parameter.
It turns out the the load-version is very light. It only sets the
DC nicknames and sorts the dive-table. There seems to be no reason
to merge dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a checkbox that triggers replacement of all English characters by
x's in notes, buddy, dive guide and (while we are at it) suit.
This is ment for people sharing logs for debugging that are concious
about privacy issues. It leaves the lenth of strings in tact as well
as special charcters as those might be needed to track down a particular
parsing problem.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Add signal testing of all variables
this commit contains all qPref* that work directly
followup commit will do changes to qPref* to make signals work
Signed-off-by: Jan Iversen <jani@apache.org>
QML is quite special, the variables needs to start with lower case in C++
and are used starting with upper case in QML
Signed-off-by: Jan Iversen <jani@apache.org>
In order to address the C++ object directy in qml, a different
registration is needed.
qmlRegisterType, registers the C++ class, allowing qml code to inherit
from it and make qml objects. This is needed for graphical elemnets
like profile and map
setContentProperty, registers the C++ object, thus allowing signals to be
catched.
Signed-off-by: Jan Iversen <jani@apache.org>
Instead of having all register calls in subsurface-helper.cpp let
qPref.cpp handle all qPref registration, since they also need to be
different
update subsurface-helper and testqml accordingly.
Signed-off-by: Jan Iversen <jani@apache.org>
It's a mamber of the cloud storage authentication class, used to hold the
proposed new password until the backend has accepted it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The shadow variable causes properties only to be saved when
actual changed, therefore some test cases need update
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This requires the user to manually copy the large test file into the
dives directory (because I really don't want to add this to the repo);
instructions how to do that are displayed if the file is missing.
Next it uses the git version of that same file (but prefetches it to
try and remove the network speed from what is being measured).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
update testgitstorage.cpp to use qPrefProxy and qPrefCloudStorage
remove core/prefs-macros.h since it is unused
Signed-off-by: Jan Iversen <jani@apache.org>
Add class variable tooltip_position to qPrefDisplay
Add class variable lastDir to qPrefDisplay
qPrefDisplay is updated to use new qPrefPrivate functions
Adjust test cases incl. qml tests
qPrefAnimations only has 1 variable, that really is a display variable
Merge the variable into qPrefDisplay, to simplify setup (and avoid loading
extra page in qml).
correct theme to save in correct place, and make it a static
class variable
Signed-off-by: Jan Iversen <jani@apache.org>
To enable undo of divelog-importing it is crucial that parse_file()
can parse into arbitrary dive tables.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
make next_check (in qPrefUpdateManager) long instead of string
Correct test cases (compare time_t not strings)
Add test case to check time_t works as expected
Signed-off-by: Jan Iversen <jani@apache.org>
In a previous commit, the get_gasmix_* functions were changed to
return by value. For consistency, also pass gasmix by value.
Note that on common 64-bit platforms struct gasmix is the size
of a pointer [2 * 32 bit vs. 64 bit] and therefore uses the
same space on the stack. On 32-bit platforms, the stack use
is probably doubled, but in return a dereference is avoided.
Supporting arbitrary gas-mixes (H2, Ar, ...) will be such an
invasive change that going back to pointers is probably the
least of our worries.
This commit is a step in const-ifying input parameters (passing
by value is the ultimate way of signaling that the input parameter
will not be changed [unless there are references to said parameter]).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove General from SettingsObjectWrapper and reference qPrefGeneral
update files using SettingsObjectWrapper/General to use qPrefGeneral
this activated qPrefGeneral and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Remove PartialPressureGas test in testpreferences
add the same PartialPressureGas tests to testqPrefPartialPressureGas
Signed-off-by: Jan Iversen <jani@apache.org>
remove PartialPressureGas from SettingsObjectWrapper and reference qPrefPartialPressureGas
update files using SettingsObjectWrapper/PartialPressureGas to use qPrefPartialPressureGas
this activated qPrefPartialPressureGas and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove Geocoding from SettingsObjectWrapper and reference qPrefFacebook
update files using SettingsObjectWrapper/Geocoding to use qPrefFacebook
this activated qPrefGeocoding and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove Language from SettingsObjectWrapper and reference qPrefLanguage
update files using SettingsObjectWrapper/Language to use qPrefLanguage
this activated qPrefLanguage and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Remove LocationService test in testpreferences
add the same LocationService tests to testqPrefLocationService
Signed-off-by: Jan Iversen <jani@apache.org>
remove LocationService from SettingsObjectWrapper and reference qPrefLocationService
update files using SettingsObjectWrapper/LocationService to use qPrefLocationService
this activated qPrefLocationService and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
Remove TechnicalDetails test in testpreferences
add the same TechnicalDetails tests to testqPrefTechnicalDetails
Signed-off-by: Jan Iversen <jani@apache.org>
remove TechnicalDetails from SettingsObjectWrapper and reference qPrefTechnicalDetails
update files using SettingsObjectWrapper/TechnicalDetails to use qPrefTechnicalDetails
this activated qPrefTechnicalDetails and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove buehlmann(), setBuehlmann(bool)
buehlmann() is really planner_deco_mode == BUEHLMANN, so no need for a function
setBuehlmann is dangerous, because buehlmann is saved on disk, but not in prefs.* and thus can lead to inconsistency between bool buehlmann and planner_deco_moce.
Signed-off-by: Jan Iversen <jani@apache.org>
remove UpdateManager from SettingsObjectWrapper and reference qPrefUpdateManager
update files using SettingsObjectWrapper/UpdateManager to use qPrefUpdateManager
this activated qPrefUpdateManager and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove DivePlanner from SettingsObjectWrapper and reference qPrefDivePlanner
update files using SettingsObjectWrapper/DivePlanner to use qPrefDivePlanner
this activated qPrefDivePlanner and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove Units from SettingsObjectWrapper and reference qPrefUnits
update files using SettingsObjectWrapper/Units to use qPrefUnits
this activated qPrefUnits and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove Proxy from SettingsObjectWrapper and reference qPrefProxy
update files using SettingsObjectWrapper/Proxy to use qPrefProxy
this activated qPrefProxy and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove Facebook from SettingsObjectWrapper and reference qPrefFacebook
update files using SettingsObjectWrapper/Facebook to use qPrefFacebook
this activated qPrefFacebook and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove DiveComputer from SettingsObjectWrapper and reference qPrefDiveComputer
update files using SettingsObjectWrapper/DiveComputer to use qPrefDiveComputer
this activated qPrefDiveComputer and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove CloudStorage from SettingsObjectWrapper and reference qPrefCloudStorage
update files using SettingsObjectWrapper/CloudStorage to use qPrefCloudStorage
this activated qPrefCloudStorage and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
remove include of QtTest in header, becaue it is not needed,
add include of QObject in header, so moc can generate code.
add QTest in cpp file, which replaces QtTest
Signed-off-by: Jan Iversen <jani@apache.org>
remove include of QtTest in header, becaue it is not needed,
add include of QObject in header, so moc can generate code.
add QTest in cpp file, which replaces QtTest
Change content of strings to test divelist_font to a not normal
font name, to ensure less confusion by readers. Remark the old
surrounding code accept illegal font names, but correcting this
is not covered in this commit.
Signed-off-by: Jan Iversen <jani@apache.org>
Files are listed in 2 places in CMakeLists.txt, update file to
secure qPrefAnimations and qPrefDisplay are listed correctly
Signed-off-by: Jan Iversen <jani@apache.org>
add test cases to secure struct preferences and qPrefAnimations work together
remove animation tests from testpreferences
Signed-off-by: Jan Iversen <jani@apache.org>
remove test macro, split in functions and add test cases
the existing test macro does not work because
sync() does not save these variables to disk (set* does)
Signed-off-by: Jan Iversen <jani@apache.org>
add the prepared class qPrefDisplay to SettingsObjectWrapper and thereby making it active.
As a consequence of the uniform naming standard desktop-widgets/preferences_defaults.cpp and
tests/testpreferences.cpp have been updated.
Signed-off-by: Jan Iversen <jani@apache.org>
add subsurface-helper.cpp to TestQML target
remove local qmlRegisterType() and add register_qml_types() instead
Signed-off-by: Jan Iversen <jani@apache.org>
With Qt 5.11 the qml compiler is included and qmlc files created in the same
directory as the qml file (at least for the qml test harness).
ignore *.qmlc
Signed-off-by: Jan Iversen <jani@apache.org>
In the last commits, the canonical-to-local filename map was made
independent from the image hashes and the location of moved images
was based on filename not hashes. The hashes are now in principle
unused (except for conversion of old-style local filename lookups).
Therefore, remove the hashes in this commit. This makes addition
of images distinctly faster.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
