That macro was useless, I should have been drunk when I wrote it, and I
don't drink.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: this overlapped with my commit 09e7c61fee ("Consistently
use for_each_dive (and use it correctly)") so I took the
pieces that I had missed]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit fb82da58a2 ("Globe: assume that we are looking at the
current_dive") changed the prototype for
GlobeGPS::prepareForGetDiveCoordinates. This patches the dummy in
NO_MARBLE.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 2bc76beb65 ("Globe: we always center on the current dive") changed
GlobeGPS::centerOn to GlobeGPS::centerOnCurrentDive. This patches the
dummy in NO_MARBLE, too.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No attempt is made to ensure that what the user does is sane. So this can
result in duplicate numbers, non-consecutive numbers, non-monotonous
numbers, whatever floats the users boat.
You can renumber a single dive or all selected dives (with a starting
number given that is applied to the oldest selected dive and then for each
newer selected dive that number is incremented by one).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a dive has multiple dive computers we enable a special context menu
when the user right-clicks on the dive computer name AND is not already
showing the first dive computer. In that case we offer to make the
currently shown dive computer the first one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For most users this is no change at all. For the few who download from
multiple dive computers this now shows them which of them is the primary
dive computer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This uses the new helper function from commit fc4f133f19d0 ("Add new
helper function that looks up the index of a dive by its uniq ID") to make
the logic implemented in commit 122593a63a46 ("Fix selection after
downloading dives from the dive computer") much saner to read.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we successfully download dives, the old selection should be cleared and
the one of the newly downloaded dives should be selected. I decided to
pick the last dive downloaded, which for most dive computers (but for
example not for the Uemis SDA) will be the first or earliest of the dives.
That seems much more intuitive than keeping the previous selection around.
Of course this is harder than it should be because of the way we track
selections and because we need a consistent dive list model in order to
change the selection.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The original name was a really bad choice as we have a 'diveid' as part of
struct divecomputer - and that is not the diveid that is being used here.
Instead we use the 'id' member of struct dive which holds the "unique ID"
for this dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code was completely bogus - it's confused about what the variable
'i' is counting.
This also let's us select the Uemis mount point by default if that's the
only valid "device" that we found.
Compile tested on Windows, untested on Mac.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user selects a Uemis divecomputer, don't show serial devices.
If the user selects a serial divecomputer, don't show the Uemis
filesystem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the last key that went in ended a tag and the next key is a tab -
deliver that to the TabWidget instead so we can navigate between input
fields.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This may sound counterintuitive but it actually makes sense.
If you have a default filename that's the name of you "normal working
file". If you want "Save as" something, that by definition is NOT your
normal working file but a subset or an experiment or something. And you
most definitely do NOT want to overwrite your default file with that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
C specs says that we can safelly free a NULL pointer, so there's no reason
to check if it's null before freeing it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit renames getDiveById to get_dive_by_id, and it also removes the
Q_ASSERTS and if(!dive) return that the callers of this function were
calling. If it has a Q_ASSERT this means that the dive must exist,
so checking for nullness was bogus too. I've changed the assert (done
in a silly C-Way.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The DiveList classes were a partial mess (and some of it is still in a
messy state). The classes that deal with it where done in 'qtHelpers.h',
the extern global variable in dive.h, a few methods here and there. This
concentrates most - but not all - functions in their own file. The reason
for that is to make the new developer faster when looking for things: if
it's a divecomputer related method, it should be in a single file, not
scattered around.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Last time I touched this I got a scream from dirk, but then I
looked at the code again and the problem that I faced was that
I broke translations in a sad way, well, now I broke it again.
However, this method shouldn't belong to MainTab ( because of
that thingy that I said before and also many others: Separate
the logic of your application from the UI specific code )
This generates a string that's going to be used on the Interface,
it doesn't display it on the interface. Move it down below makes
it easier to test ( I don't need to create an Widget and worry
about the parent-relationship with the mainwindow just to test
this function, for instance. )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QStrings shouldn't be == "" to check for empty string, use .isEmpty()
QStrings shouldn't be != "" to check for non empty, use .size()
std::string shouldn't be cleared with = "", use .clear()
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way, the user can save dives containing sets of "standard cylinders". Selecting one of those prepopulates the gas list for the planner.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
4243fcb915 ("Dont set coordinates when two or more dives are selected")
Changed how the prototypes in GlobeGPS looks. This aligns NO_MARBLE
version of GlobeGPS with that.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Upon pressing Ctrl-Q or the window close button a modal dialog was shown
to remind the user that the planned dive is not saved. This patch
triggers the "cancel plan" action before trying to quit.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For deco stops show the gas of the next segment in the table. In
recalculation remove old deco stops earlier.
In struct diveplan, the items are "segments" with a beginning, a duration,
and a gas. In contrast, the UI of the planner uses "waypoints" which are
the boundaries between segments. It is conventional at least for deco
stops to display the gas of the _next_ segment in the runtime table (i.e.
the gas possibly to be switched to).
Furthermore, in addStop, the old deco stops have to be removed earlier as
otherwise a new waypoint later than a previous generated gas switch
inherits the gas of the old switch.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Same problem as the previous commit: toStdString() returns a temporary,
and c_str() will return a pointer to internal data, freed at the end of
the statement. So get the pointer to be strcpy'ed in the same statement.
Changed to toUtf8() to be more explicit about the encoding and to avoid
std::string
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QList::first() returns a reference to an item, but that list was a
temporary. The list gets destroyed at the end of the statement (the
semi-colon), so we ended up keeping a reference to freed data (i.e., a
dangling pointer)
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This re-adds this code that got removed in a209dfbfd5 ("Multi dive
edit: don't change location texts until user saves the change")
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise the code loading a dive into the field would mark it as
changed.
This re-adds this code that got removed in a209dfbfd5 ("Multi dive
edit: don't change location texts until user saves the change")
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still gets it wrong (i.e. marks things as edited when they are not or
not edited when they are) but at least they are no longer incorrectly
marked as incorrectly parsed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I cannot figure out how to get the hemisphere letters translated correctly
in qthelper.cpp. Short term hack for now - someone who understands how
this is supposed to work really needs to take a look.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As in commit 3870bdafee53 ("Globe: we always center on the current dive")
passing in a specific dive here makes no sense - it's always about the
current dive.
Fixes#513
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simplify the API (we'll take advantage of this in the next commit).
We always center the globe on the current dive, so no point in passing
that dive in.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we keep updating the location text of all selected dives we can lose
the status of which dives had the same text of the original dive and which
did not (this happens if the location we are adding is identical to a
selected location but adds text to the end of it).
Now we only edit the other dives after we accepted the change.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't understand why we wouldn't set the percentage if we displayed text
there as well. This looks much better.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on Linus' idea on the mailing list.
Treat NULL strings and empty strings as identical.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This time for values that aren't simply text.
For normal integers this is rather straight forward. For the 'when'
timestamp we simply assume that this is a shift in time.
What is still missing is consistent handling of the three fields that are
implemented as tags: tags, buddy and divemaster. We have special code for
tags that makes no sense in a multi-edit scenario. And we treat divemaster
and buddy as a single string - which kinda works but treats "Bill, Joe"
and "Joe, Bill" as different.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was broken when porting to Qt - we used to do this correctly in the
Gtk version.
When editing multiple dives we show the current dive to the user and allow
them to edit that and then apply those edits to all selected dives. The
way this is SUPPOSED to work is that we only change those selected dives
that had the same value for the edited field as the current_dive had for
that field.
Let's say you select ten dives. The current dive shows divemaster Joe. You
change that to divemaster Jim. Then only the selected dives that had
divemaster Joe should change to Jim. All other dives should stay
unchanged.
This seems to implement that logic.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The way this is implemented is broken in several ways.
This fixes the first issue.
For the invocations where we are in the 'WHAT' checking to see if the
value we are changing in the selected dive was previously the same as in
the current dive (which is the one shown to the user for editing), then we
need to make sure we change the current dive last, otherwise the
comparison will fail.
Of course, right now we only do this check for gps location, which is a
massive bug as far as I am concerned.
Fixes#515
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I we are showing a calculated ceiling, then we have to replot the profile
after a preferences change as the gradient factors could have changed
which might change a calculated ceiling.
Also use the rulergraph preference instead of checking the settings
directly.
Fixes#511
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QVariant does the right thing, regardless of whether the value is stored
as int or as string - so let's just use that instead of manually checking
for integers (and failing if the values are stored as "true" and "false").
Fixes#511
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit bcdd6192fe ("Show translated event names in tooltip") I was
too aggressive in replacing the checking for event names with checking for
event types. It turns out that we are abusing an existing event type in
the planner (and use a different event name to mark the difference). By
just checking for the type this now caused incorrect information to be
displayed in the info box (a simply "PO2 warning" on a Suunto D9 could
turn into a "Bailing out to OC" notice).
The correct fix is to get our own range of SAMPLE_EVENT_xxx numbers from
libdivecomputer. Once we have those, we can do this the right way. For now
we just fall back to also checking the event name (which is what I wanted
to get away from so translated names don't trip us up).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 7f3b487c77 ("Restore the previous globe zoom level after
showing dive without GPS") I was a bit too aggressive in replacing a
deprecated API function - people still need to be able to compile against
Marble versions older than 4.10.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user changes the coordinates for a dive but then cancels the dive
edit, the globe would stay at the location that was temporarily set and
not rotate back to the still active coordinates.
This fixes it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Apparently this only happens on Windows, but there we would change the
dive coordinates on a SINGLE click when editing a dive. With this change
we simply bail if the event isn't a double click.
Fixes#505
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a trip is selected (or for other reasons more than one dive), this
would change the GPS coordinates of the whole selection which almost
certainly isn't what the user wanted.
Instead, only allow changes of the coordinates on the globe if exactly one
dive is selected.
[Dirk Hohndel: massively rewritten and extended - but I didn't want to
simply "steal" the commit from Tomaz...
This now maintains the "zoom out mode" for dives without
GPS coordinates and deals with edits of multiple dives that
are initiated the "normal way" by starting to edit other
data as well.]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Thanks to commit 83c5ab5871 ("Zoom out when dive has no coords.") we
show more of the globe when displaying dives without GPS data - but that
caused us to forget the zoom level we used before and so the experience
when switching back to a dive with GPS data was disappointing.
This makes sure we track the last valid zoom level and restore it when
needed.
I also replaced the deprecated zoomView() calls with setZoom() calls.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Mouse activity on the globe should not select dives when one or more dives
are being edited. This improves the detection of that state.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the globe zoom out to show it complete when
the dive has no coordinates.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "is_air()" test works when we have the gases in permille, but not in
percent. In that case we can just check for He == 0 and O2 == 21.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order for this to work we need to compare against the event type
instead of the event name - which makes much more sense to do, anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The behavior at startup is actually very annoying: we select the latest
dive, and expand the trip it is in, but since we use "scrollTo()" on
just the dive, and it's not initially visible, the startup will make the
first dive be at the top of the list view.
Which means that the actual _trip_ detail is not visible at all, since
it will have been scrolled off the list view entirely.
Fix this by first scrolling to the trip, and only then scrolling to the
actual dive (using the default "EnsureVisible" policy). Obviously, if
it's a trip with lots of dives, scrolling to the dive may end up
scrolling away from the trip header again, but at least that never
happens at startup, and at that point you have to scroll away from the
trip just to show the dive.
Do this same dance when changing the dive selection (mainly noticeable
when picking dives on the globe view).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having all the grid lines in the same color made things visually
confusing. To clean this up a little make the heartrate lines a light gray
color.
Fixes#484
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing the location string we try to be smart and automatically add
the correct coordinates (assuming we have a location of this name already
in the dive list). So if you return to the same dive spot you'll get the
correct coordinates by default. But this creates bogus result if we allow
an empty location to be matched, as it makes no sense to assume that all
dives without a location name were at the same coordinates.
Fixes#498
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
DateTimeOriginal should be used as first option when loading images.
When images are modified, the original time should be retained, but the
DateTime will change to the edit time.
See #495
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds option to export selected dives into a CSV file to the right
click menu on dive list.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds an item to File menu to export all dives in CSV format.
Naturally this includes also the code to perform the export.
Fixes#434
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When exporting UDDF logs the file name selection dialog should talk
about export, not save. This patch changes that text
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixing the Hotkeys inconsistencies in subsurface, All the popups should
react to 'esc' and 'ctrl-w'/'cmd-w' as 'cancel'. also 'ctrl-q'/'cmd-q'
should quit subsurface.
Fixes#489
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding the ability to close the shift times window, also Quit subsurface
with this window in front.
See #489
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the ability to close the about window with the ctrl + w
shortcut.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add ability to quit Subsurface with a Ctrl-Q shortcut even if the yearly
statistics window is active.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This enables closing the yearly statistics window with esc or ctrl+w
keys.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add ability to close the user manual window with a Ctrl-W shortcut.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds more handling of missing actions for the mouse on
the equipment edition. It complements the stuff talked about
on bug 359, but it's a different issue. 359 seems already fixed.
See #359
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a download is canceled, discard the partially downloaded dives.
Fixes#341
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using the auto-completer while the tags widget is 'empty', always picked
the first choice.
Write some letters and remove them in an empty tags widget, the complete
list of tags will appear - now if you try to choose any tag with the
keyboard arrows it will choose the first one. also if you tried choosing
it by mouse it will be inserted twice.
This is fixed by removing the unneeded else part.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a manually added dive is saved we cancel the plan. In that process
we throw away the cylinders which triggers a redraw of the profile. Which
tries to access the diveplan and its data points that have already been
freed. BOOM.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When changing the values of air/water temp after the first time and save,
it will be reset the intial value.
This is fixed by removing the "select_dc" (which makes the change to the
dive struct instead).
Fixes#457
Signed-off-by: Yousef Hamza <jo.adama.93@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a preferences setting, it should belong to the preferences
structure.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This marks a lot of todo's where I think there's core stuff being mangled
on the interface - we should remove this from the interface to make
testing and maintenability easier.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rewrite of the actual planner logic. Now ascend to the next potential stop
depth. There the state is cached and we try to ascend to the next stop
depth. If we hit the ceiling while doing that we go back to the cached
state and wait there for a minute. Then we try again. Then loop.
Converted all depth related variables from unsigned int to int. During
planning, in a time step the current depth can temporarily be negative and
comparisons of a negative int with an unsigned it have not the result I
expected ( (int) -2 < (unsigned int) 3 turns out to be false). And we
don’t really need the 32nd bit that unsigned buys us for depths.
Deco stops are now shown in the same table as manually entered stops in
boldface (I removed the second table to save screen estate).
The gas shown in the table is still misleading as it means the gas used on
the segment leading up to that event.
The update of the profile only works partially upon changes in the list of
available gases.
Treatment of various gases is basically there but needs some more love.
The ascent velocity is now provided by a function that takes the current
depth as argument. Currently it always returns 10m/min but that will later
be variable (and hopefully user configurable).
The profile is not redrawn while deco is computed (avoiding an infinite
recursion).
The table got a new column for the duration of a segment while the old
“duration” column was renamed “Runtime” to reflect what it actually shows.
Currently, only the run time but not the duration are editable.
All deco gases are used from the depth where their pO2 is 1.4bar. This
should become more flexible.
Calculation of the pressure drop in cylinders without configured volumes
is suppressed. This solves a problem with the planner crashing when saving
a dive where not all cylinders had been manually given a volume.
[Short rant break: Treating 0/0 as air bites back at so many places. E.g.
Cylinder data is initialized with memsetting the whole structures to 0.
Then later suddenly this totally unconfigured cylinder is being treated as
it would contain air. Maybe at some point this was a feature. But it lead
to a naughty bug which took me over an hour to resolve. We should
seriously reconsider this choice and better move to 209/0 being air if
changing this everywhere is not too much trouble]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
-Renaming prefs members for consistency.
-Changing references of QSettings to the prefs structure instead.
-Removing unused functions in pref.h were left over from an old version.
-Changing the data-type of bool members to short for consistency with other members.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- move buttons to the bottom of the window
- use QDialogButtonBox that allows to follow platform-dependent button layout
- enlarge window size to not to crop content
- change "Close" button action from "accept" to "reject"
Signed-off-by: Andrey Zhdanov <andrjufka@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move the heart rate graph icon up in the toolbox with the cluster of
buttons that control graphs
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code for toggling the DC reported ceiling in red or "surface
color" clearly had never been tested.
This seems to create a reasonably attractive implementation - not exactly
what we had in the past, but good enough.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The userid of Subsurface Webservice can be included in locally saved xml
files and git repository.
For xml files, it is stored in userid tag. For git repo, it is stored
in 00-Subsurface file present in the repo.
Preference dialog and webservice dialog modified to include option
for saving userid locally.
In case of difference in default userid and userid in local file,
some semantics are followed. These can be referred to here:
http://lists.hohndel.org/pipermail/subsurface/2014-April/011422.htmlFixes#473
Signed-off-by: Venkatesh Shukla <venkatesh.shukla.eee11@iitbhu.ac.in>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As a warining for the user mark the field red.
If the user inputs invalid input that will be ignored
while parsing.
But with adding a one character error margin to prevent it from toggling
between Red and Yellow while editing existing values, for example "After
Deleting unit and last number after '.'"
Signed-off-by: Yousef Hamza <jo.adam.93@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The include path is set up correctly so we don't need these explicit paths
in includes.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After adding the animation member in the preference struct, it is
very resonable to change these references of QSettings to the
preference structure instead.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds new push button "HR" to the button bar on the dive profile to
toggle display of heart rate.
TODO: New icon for the heart rate button is needed.
Fixes#485
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The lettering of the heart rate numbers on the lefthand exis "fall off"
the left hand of the profile panel when the panel is a bit narrow. This
minute change moves the letters a bit closer to the Y-axis so that their
left-hand extreme is more or less in line with those of the depth-labels
on the Y-axis. This is a partial response to Ticket # 484.
See #484
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When doing some changes in the preference window and clicking "Apply", the
'Close without saving' button is supposed to restore the previous values.
However some fields were not restored correctly.
- The Animations Slider was never restored to its initial value.
(A new member in the pref struct was added - pref.animation)
- The 'Font' and 'Font size' were restored correctly to the previous
values but their effects weren't restored to the UI and that required to
open the prefrences window again and press ok.
Fixes#481
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The present text for configuring the display of unused cylinders simply reads:
"unused cylinders". This is now changed to "Show non-used cylinders in
Equipment Tab". The latter wording is much clearer to the average user.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The removal of the planner menu entry was erroneously commented out.
Other parts of the code rely on ENABLE_PLANNER to know if the planner is
enabled or not so rely on it here to.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
