And also show a warning to the user saying that that
action is non-cancelable.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Get the Qt data structures and convert to something
that we can use in our C - core.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We where showing the UID, wich didn't made sense.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So we can merge them later - currently we are showing
only the ID, ugly - fixing next.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a new widget on the dive site management view to
display all other dive sites at the same coordinates.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The UI detects when it should refresh the loction after the
user finished editting a divesite. Creating and editting
divesites is now working even when the current dive is not
saved yet.
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update the tooltip and enable only when there is a divesite selected
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use clicked instead of activated signal on the completerList to
handle the selection of a divesite.
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A divesite uuid is created using the timestamp of the currently
selected dive. When there is no current_dive, use the current
time to create a uuid.
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If localDevice isn't valid we never initialize the discory agent, so
let's not dereference it in the destructor unless it is valid.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Continuing the crusade against excessive number of parameters for some
functions. This should be the last of the import functions to be cleaned
up.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At least on Ubuntu with xfce instead of Unity this appears to be necessary
to get a menu bar for the application.
Fixes#833
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When, in a dive edit mode user entered a dive site
and went to dive site edit mode then finished the ds
edit, the app would lose the disabled property of the
dive list, making it possible to select a new dive
when we where editing another one, complete mess.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user clicks on the first or second option of the drop
down list, subsurface will move him to the dive site edit panel
automatically, since it's a new dive site and there's no information
about it yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we are in display dive mode, and then edit the
location text edit, going to edit dive mode, the location
text edit will be moved a bit below of it's original position
but the Dive Site List would be already opened, and stuck
on it's original position, covering the dive list.
This patch fixes that.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Moved the get taxonomy button from the maintab to the edit dive site
widget.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The get taxonomy button will be inside the manage dive site interface.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I didn't have time to create / finish the photos widget, so
I'm adding back the profile view while in dive site edit mode,
but disabling it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now this is quite ugly. And at least in my VM the transparency
doesn't seem to work correctly. But at least we now have some visual
indication that we are doing something while opening or saving cloud
storage.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This removes the excessive amount of parameters on manual CSV import. We
just use appropriate string array than can be directly fed to XSLT
parsing.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having random uuids seemed like a good idea, but there are several
situations where they really cause problems. One is merging dive file
imports from V2 logfiles. Another is testing such imports.
Instead of making the uuid random we now hash the name and add the
timestamp of the first dive associated with this dive site to the hash
(first in this context is "first encountered" with no guarantee that it is
the chronologically first). This way V2 imports create deterministic uuids
but uuid conflicts are still extremely unlikely, even if the user has
multiple dive sites with the same name.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Gas switch is not part of recreational mode, so disable the switch options.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Editing statistics templates is not supported now, as there is no
custom template for statistics printing, so disable the template
edit area.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
The new statistics code, enable the editing of colors, font, and other
template options.
This patch enables the UI elements for these features.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
- use the same generic code for both types of templates
- check for the printing type before generating the template
- remove unused printStatistics() method
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Show the existing templates based on the print type selected
by the user.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Template names was capitalized, so change the file name to
"Custom.html" instead of "custom.html"
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
After a replot, check if there is an error message to display.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Each state can have the same widgets but with different
properties - currently I'm using "enabled" : true and false
for the DiveSiteEdit, it looks like a big amount of code
for such a small thing but it was the cleaner way that
I tougth of doing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Try to get a pretty print message when a device discovery error
is raised and it is unknown.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a Bluetooth device is selected from the discovered list
display information about its address and enable the save button.
On Windows we don't need to check if the devices are paired because
the pairing process is done automatically on the connection step.
If the devices are not paired Windows will ask for user's permission
to continue the process.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are moments when the name of the device is not collected
properly and it is unavailable. Instead of showing an empty string
then print the address of the device.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Windows we cannot determine the pairing status of the
device. Therefore we print only information about its name
and about its BTH address.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should wait for the WinBluetoothDeviceDiscoveryAgent completion
when the stop method was called.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Windows we cannot select a device or show information about the
local device. Therefore we disable the UI section related to local
device details.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Implement a custom lookup service for remote Bluetooth devices
discovery. This will be used on Windows platforms to collect
information about the name and the address of a remote Bluetooth
device.
In the beginning we initialize the queryset with the necessary
flags and we start the lookup service. When a device is discovered
we collect information about its name and its address and we
raise a signal with it using the same signature as the one emitted
by QtBluetoothDeviceDiscoveryAgent implementation.
Finally we end the lookup service and we reset the internal flags.
This code was written with the help of the sample code documenting the
relevant APIs provided by Microsoft Corporation at
https://code.msdn.microsoft.com/windowsdesktop/Bluetooth-Connection-e3263296
which is under the MS-LPL. No code from the samples was copied and the
code in this commit is covered by the GPL and not the MS-LPL.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a skeleton which will be used to develop the Bluetooth custom
serial implementation for Windows platforms.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old implementation didn't use the correct deviceLabel pattern.
When the pairing status of a device was changed the name of the device
was missing from the new label. With the new implementation when the
pairing status is changed we replace the old state with the new one and
maintain the device information from the old label.
Also we set the same pairing background colors used in the
addRemoteDevice callback. In this way the label's state is consistent
and the UX is improved.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Clear the Bluetooth discovered devices list on each search.
In this way we will show only the devices that are in range
and active during the last scannning. Also if we clear the
list before each call we don't need to check anymore if the
discovered device is already in the list.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If there is no error reported when the device scanning is finished
then report to the dialog status that the scanning finished
successfully. Otherwise report the last error.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Do some extra cleanup when the BtDeviceSelectionDialog is
destroyed.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After renumbering any number of selected dives, the selected
dives would still be selected, but this was not visible from
the divelist view. Clicking on subsequent dives would deselect
them while the GUI shows them as selected, any further action
like delete would not be done on the visible selection, but
on the invisible dive->selected state, leading to apparently
very weird behaviour.
Fixes#917
Signed-off-by: Sander Kleijwegt <sander@myowndomain.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes deco_allowed_depth() work both for Buehlmann as well as
VPM-B (as long as the VPM-B internal variable total_gradient[] is valid).
As a bonus, in VPM-B mode, in the planner, the ceilings are VPM-B ceilings
and not Buehlmann GF.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Conservatism level can now be changed from gui, is saved in settings.
Also way of disabling the planner settings in the ui was improved
to support more deco models and be called at the widget creation.
Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
Disable all the UI elements for "dive list print", disable
all the template settings as well, Template Edit button
will be enabled after statistics print supports color palettes.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
As there is a problem with sizing the borders in QWebView, "vw" sizing is not
working as supposed with border-width, As a workaround we export border-width
dynamically, so that border-width is relatively the same for all page sizes.
The border-width is equal to the page width / 1000 which gives a nice range
for borders for A0 - A5 papers, Also prevent drawing zero pixel borders
and use 1 px borders as the minimum border.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Make dark colors for headers while lighter colors for data fields, this
is more intuitive, and makes the palettes more appealing.
Make dark color default for cells2
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Add another color 'Table cells 2' to the color palette, make all the
backgrounds solid white by default.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
While printing only draw headings, SP changes, gas events or bookmark
events, otherwise don't show anything.
Many warning logos can hide the useful information especially in
templates with small dive profile area.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
There's no need to show the 'dive site' name on the group box
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When choosing a color from the QColorDialog, the TemplateEdit trigger to
change the current selected template to be custom, and then changes the
selected color. When the selected template is changed old template
values are copied to the current template which results in incorrect
behaviour.
This is fixed by checking for the current editting state before setting
the saved palettes as the current used palette.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
The custom palette index is defined by the CUSTOM directive, and it
should be used.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
When QColorDialog is closed with 'Cancel' button, it returns invalid color
that must be discarded. So check if color is valid to prevent replacing
the current color with black.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Some widgets on the main tab don't show any kind of focus indicator on
some systems (like Mac), so it's a good thing to provide another way to
show that they indeed have focus.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This model should be used inside the Edit Dive Site mode.
It should display all photos from all dives that are part
of this dive site, ignoring trips.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When switching from one DC to the next, the text of DC name is not updated due
to commit 487ddce353. This patch re-inserts the
call to updateText() for the specific function to get the DC name updated
properly.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't try to connect the globe when NOMARBLE is active.
Check exisistance before trying to open an image file.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Strangely, it still doesn't show the flag where it should be
(but it shows just after a reselect, so it's mostly a cache
issue somewhere)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we clicked in the globe and changed programatically
the text on the coordinates edit widget, the background
was still white instead of the bright yellow that it should
have to show that it was modified.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The accept method didn't save the gps edit even if we
put correct text on it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now when the user selects the dive site edit, the globe
will enter in edit mode too.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's a placeholder for now, but next commit will make it work.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed to start easing the transition from the completely
wrong and bogus MainWindow::instance()->globe() calls. this is still
wrong, but with it I removed one level of indirection.
I did that now because I wanted to not taint the location management
when I use it to deal with the globe.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We didn't correctly update the dive site as soon as the
dive_site edit finished, and this time we are actually
correctly updating things using signals instead of calling
the mainwindow for everything.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And move things around, informationManagementEnded was a good name
but endEditDiveSite is better.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Manage dive sites action should be in the View menu because it makes
more sense to "view dive site edit"
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We really shouldn't need to connect to the MainWindow in order to get the
right scale for the fonts when printing. While printing likely will remain
a desktop only function, this is just bad design. And making calls like
this from the paint() function is a bad plan, anyway.
So instead we make sure that every DiveTextItem knows what the printScale
was when it was created (or actually, when the text was first set as they
frequently get created before we have a scene which we use to get to the
profile), and gets updated whenever that scale changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had all this wonderful code to scale the text correctly, except we went
out of our way to make sure the code wouldn't be called unless something
changed on this specific text item. But that's bogus because the scaling
depends on external factors like the fontPrintScale.
So instead of calling updateText() when attributes of this DiveTextItem
change simply call it right before the DiveTextItem gets painted.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having it as part of the DiveCalculatedCeiling class caused us to manage
this text 17 times (and plotting it 17 times) which is rather silly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on the Subusrface logo colors, keeping the hue and modifying
the saturation and value in order to get what to me looks like a fairly
pleasant color setup.
This is an attempt to come up with a good default. By all means, this is
supposed to be a starting point to make it better, not a decision on what
the colors should be. I would however claim that they are better than the
previously available options :-)
I like the idea of basing this on our existing colors - but even that is
up for modification if someone has a better proposal.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code trusted in Windows new lines with length of 3. The new code
strips out spaces and line ending chars resulting in empty line being
of length 0.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When importing a template, make it the user currently selected template.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
If user selected template is not found, we choose the first template as
a default choice.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
