When autosync to cloud was enabled, the old code would crash,
because it synced to cloud from a signal handler, which executed
the main loop when checking the cloud connection, which deleted
the object which was causing the original signal. Or something
like that. See discussion in #4119.
To avoid such problems, send a signal via a 'QueuedConnection'
from QMLManager to itself. The slot will be called once the
signal handler terminates and the main event loop retakes
control.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When changes need saving, the notification text was set quite
deep in the calltree in "saveChangesLocal()". I don't know why
this was put so deep in the call tree. In any case, it prevents
asynchronous saving of the data. Therefore, pull it up to
chnagesNeedSaving().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The signals of the undo-stack can only be connected after it
was initialized. One of those cases where I would have preferred
a crash over a warning message. The mobile version is extremely
noisy!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Q_FOREACH and foreach are anachronisms.
Range based for may cause a performance regression: it can
lead to a copy of shared containers (one reason why Qt's
COW containers are broken). However, as long as there is no
user noticeable delay, there is no point in analyzing each case.
And also no point in slapping an 'asConst' on every container
that is looped over.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To avoid memory management woes. These shouldn't be global
variables, but let's fix that later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
While the startup flow should make it obvious when a user is not
correctly logged into the cloud, we still do see fairly frequent
situations where a user has an incorrect password on a mobile device and
is confused about why their data isn't syncing with their PC. Now this
is clearly shown in the main menu.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fix the configuration of the deco ceilings in the mobile version:
- make the settings work;
- remove reading of the dive computer ceiling from git;
- hide the gradient factor in the profile when the calculated ceiling is
not shown;
- when the calculated ceiling is disabled in the settings, disable
editing of the gradient factor.
Signed-off-by: Michael Keller <github@ike.ch>
The undo-code uses owning pointers based on std::unique_ptr to
manage lifetime of C-objects. Since these are generally useful,
move them from the undo-code to the core-code. In fact, this
eliminates one instance of code duplication.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The parser API was very annoying, as a number of tables
to-be-filled were passed in as pointers. The goal of this
commit is to collect all these tables in a single struct.
This should make it (more or less) clear what is actually
written into the divelog files.
Moreover, it should now be rather easy to search for
instances, where the global logfile is accessed (and it
turns out that there are many!).
The divelog struct does not contain the tables as substructs,
but only collects pointers. The idea is that the "divelog.h"
file can be included without all the other files describing
the numerous tables.
To make it easier to use from C++ parts of the code, the
struct implements a constructor and a destructor. Sadly,
we can't use smart pointers, since the pointers are accessed
from C code. Therfore the constructor and destructor are
quite complex.
The whole commit is large, but was mostly an automatic
conversion.
One oddity of note: the divelog structure also contains
the "autogroup" flag, since that is saved in the divelog.
This actually fixes a bug: Before, when importing dives
from a different log, the autogroup flag was overwritten.
This was probably not intended and does not happen anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For reasons of symmetry (there is a is_manually_added_dc()
function), create a make_manually_added_dc() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This causes UI confusion. Notably we go into edit mode and
reduce the number of samples, leading to loss of information.
If someone really manually adds a dive with more than 50
samples, they should still be able to explicitly open the
dive in the planner.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This will allow the user of the mobile app to export dive and dive site
data from their mobile device without using the Subsurface cloud.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The export functionality is horridly poorly implemented, and the UDDF export
isn't actually functional on mobile. And why would we support this in the first
place? That's not a reasonable expectation for the mobile app.
So let's just completely remove that and good riddance.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have two different API endpoints. supportEmail() which adds the
default subject, recipient, and message body, and the generic
shareViaEmail() which takes all of these as arguments.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was added for Android a while ago, but now this works on iOS as well which
is a very welcome addition for the recipient of these support emails (i.e. me).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason the flag to exclude . and .. breaks this functionality.
It works just fine without that flag, so let's just remove it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had various random "free parts of the git info" left-overs from when
we passed down the git repo data ad-hoc. Get rid of it, and replace it
with just doing a 'cleanup_git_info()' that does the final cleanup of it
all.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
That function name was incomprehensible. What did it check? And what
did the return value mean?
So let's rename it to something that actually describes what it does,
and reverse the meaning of the return value while at it.
So now it's called 'remote_repo_uptodate()', and it returns true if the
remote repository branch has the same value as our 'saved_git_id'.
It's still a bit obscure, but at least within the context of the only
user, the code now makes _more_ sense than it used to:
if (remote_repo_uptodate(fileNamePrt.data(), &info)) {
appendTextToLog("Cloud sync shows local cache was current");
but maybe we could come up with even better semantics and naming, and
make it even clearer.
Requested-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have this nasty habit of randomly passing down all the different
things that we use to look up the local and remote git repository, and
the information associated with it.
Start collecting the data into a 'struct git_info' instead, so that it
is easier to manage, and easier and more logical to just look up
different parts of the puzzle.
This is a fairly mechanical conversion, but has moved all the basic
information collection to the 'is_git_repository()' function. That
function no longer actually opens the repository (so the 'dry_run'
argument is gone, and instead a successful 'is_git_repository()' is
followed by 'opn_git_repository()' if you actually want the old
non-dry_run semantics.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Apparently some people try to manually enter older dives where they don't
have data about the dive time and therefore want to only capture the dive
date.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We would dereference the undoAction before the command infrastructure
was initialized which led to a crash in the mobile app.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we can have attachment of fairly arbitrary size (which should
be extremely useful for long libdivecomputer logs). This isn't quite as
intuitive as what we did before - the user needs to pick an email app to
share with), but that doesn't seem too bad - and also... this way they
can share logfiles via Dropbox or analyze them in other apps).
If the file share fails for some reason, we fall back to the old method
with passing the combined logs as body to the support message.
As an implementation detail this keeps the correct path for the app log file around
(this was stupidly overwritten before).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The first location we should try is one that allows us to share files.
In theory this should work on every device, but we do have a few
fall-backs, just in case.
This also moves the Android specific include to the top which seems much
more standard.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In general, replace "dive master" by "dive guide".
However, do not change written dive logs for now. On reading,
accept both versions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
With -Wextra, gcc/g++ complains that compound initialization
of weightsystem_t misses the auto_filled parameter. Add it.
For C++ code we might think about writing a constructor. However,
we use two versions: with and without copied string.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
And while doing that, have all the cases where we already include
qthelper.h simply use a define in that header file - but keep the two
other instances of the define where the C++ source don't need qthelper.h
otherwise.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt 6 will drop support for QRegExp.
Use QRegularExpression instead.
The exactMatch in getVersion() was rather bogus, given the pattern.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 105b60389c ("mobile: remove GpsLocation reference from qmlmanager") I
was a bit careless with the code removal and unintentionally also removed the
initialization of the progress callback. With this change the updates from the
download process are once again shown on screen in the mobile app.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This tries to make our fingerprinting code work better, by avoiding
using the "deviceid" field that has always been unreliable because we've
calculated it multiple different ways, and even for the same version of
subsurface, it ends up changing in the middle (ie we calculate one value
initially, then re-calculate it when we have a proper serial number
string).
So instead, the fingerprinting code will look up and save the
fingerprint file using purely "stable" information that is available
early during the download:
- the device model name (which is a string with vendor and product name
separated by a space)
- the DC_EVENT_DEVINFO 32-bit 'serial' number (which is not necessarily
a real serial number at all, but hopefully at least a unique number
for the particular product)
but because the model name is not necessarily a good filename (think
slashes and other possibly invalid characters), we hash that model name
and use the resulting hex number in the fingerprint file name.
This way the fingerprint file is unambiguous at load and save time, and
depends purely on libdivecomputer data.
But because we also need to verify that we have the actual _dive_
associated with that fingerprint, we also need to save the final
deviceid and diveid when saving the fingerprint file, so that when we
load it again we can look up the dive and verify that we have it before
we use the fingerprint data.
To do that, the fingerprint file itself contains not just the
fingerprint data from libdivecomputer, but the last 8 bytes of the file
are the (subsurface) deviceid and the diveid of the dive that is
associated with the fingerprint.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prior to this change, we had two different cylinder lists as models for
drop down boxes - one that prepends the "no default cylinder" entry
(which we need for setting up no default cylinder to be used in the
app), and another one that only includes actual cylinders.
The problem occured if a dive is created before the first time we edit
an existing dive: in this case we are applying indices across the two
models, but the indices are of course off by one; this results in
actually picking the wrong cylinder. So each time we try to edit a dive,
we end up with the previous cylinder in the list.
This commit simplifies the code by having only one place where we create
list of cylinder names (which is then used as the model for the combo
box). It also uses more logical names for the two 'flavors' of this list
to make it clear which one is supposed to be used (the regular list when
editing or adding dives, the one with the "no default cylinder" entry
prependet for the Settings page).
Reported-by: Brian Fransen
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We already showed the tags, but we didn't allow the user to edit them.
This tries hard not to create inconsistent or illogical tags by trimming
white space and being careful with how the tags are added.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the mobile version we should always allow a little more wait time for
the cloud server - there just seem to be more issues with response times
on mobile devices, especially when in places with poor data reception
(which isn't uncommon for dive sites).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Thus, the membuffer data is automatically freed when going
out of scope - one thing less to worry about.
This fixes one use-after-free bug in uploadDiveLogsDE.cpp
and one extremely questionable practice in divetooltipitem.cpp:
The membuffer was a shared instance across all instances
of the DiveToolTipItem.
Remves unnecessary #include directives in files that didn't
even use membuffer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
