Hitting apply in the preferences dialog causes a QList assert.
This led to DiveListView::reloadHeaderActions(), where
we have an out of range access.
Patch makes the column count match the header action count.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Removed the "Visible:" header on the column selector. It doesn't
have to be there, and it's not in the similar equipment column selector
- PO2 --> pO₂ (and others)
- Use same initial case in the units selector in preferences
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the 'mouseClicked' didn't get any dives at the click-geolocation,
ignore it and do not try to select an empty selection. this was
causing a lot of issues when map-navigation.
Also, good deal of code cleanup.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code ( slow++ ) ignored that each new dive-selection
we recreated all information on the profile window, so this
version ( a lot more verbose, I know. ) will ignore all dives
that are being selected and will only send the 'dive was selected'
information in the last line of the algorithm, instead of calling
it for each dive on the list of 'to be selected' dives.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
nr was used but never initialized.
Also, the code removed used select_dive had likely just been forgotten to
be removed when the correct code using selectDive() was added a little
later in the function.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch remembers the trip selection across the Dive Tree Model.
It's a tiny bit big because we used to have a variable 'selected
trips' that's now calculed dynamically - this is more future proof.
This is a start of Un-cluttering the view ( for 4.1 I hope to reduce the
code in this class to nearly a half. )
Fixes#303
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The rememberSelection() / restoreSelection() functions ONLY handle
selected dives, not selected trips. This is a bit of a misfeature, but
because of that we need to make sure we clear our notion of selected trips
when we use restoreSelection()
Fixes#285
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the possibility to shift the times of all selected dives
by a fixed amount to correct for time zone problems or mis-set dive
computer clocks.
Select the dives and right click in the dive list.
[Dirk Hohndel: added .ui file to FORMS and fixed some whitespace damage]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This honors the sort order of the dive list when figuring which trip is
"above". It works both on a single dive or all selected dives.
This also fixes a couple other cases where the dive list selection and
trip display could get messed up.
Fixes#287
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Dive list no longer has messed up trip entries
- Dive list is now correctly marked as modified after trips are merged
- When data file is closed, the list of selected trips is cleared which
avoids a potential crash when loading a new data file
Fixes#286
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This limits merging dives to dives that have at most half an hour of
surface time between them. That "half hour" is kind of a random thing
to pick, but it's not horribly horribly wrong.
It also changes the semantics of "merge selected dives" to something
that actually works pretty well: you can select a whole range of
dives, and it will merge only the ones that makes sense to merge. I
tested it, and it's reasonable. I could select all my dives from one
dive trip, and then do "Merge selected dives", and it did the right
thing (Dirk: I selected the florida trip, and it merged the aborted
"missed the trench" dive with the _actual_ "trench" dive).
I'm _slightly_ hesitant about this in the sense that maybe some crazy
person actually would want to merge dives with more than half an hour
of surface time between them, but it really doesn't seem to make much
sense.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch removes a duplicated method: get_divenr and
get_index_for_dive. The two are exactly the same ( if my
c is not broken, but I may be broken since I'm working like
crazy for almost 30h nonstop. ), so please take a good look
before applying this one.
[Dirk Hohndel: Tomaz took the slightly broken of the two implementations,
so I switched that out for the correct one]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I hit this bug on deleting dives and the newly selected
one got inside a trip, that wasn't expanded. anyway, easy one.
:)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes a selection just after the dives that got deleted,
or nothing if the list is empty.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the dive is deleted, we force a recreation of the dive list,
this is done because we were broken by design on the first transition
to the Qt infrastructure - one thing to change for 4.1, but no time
for 4.0.
We forgot to ask the headers to 'please, span more than one row,
please' when we recreate the model. easy =)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch just reverts some wrong changes that I'v done on a
past commit ( sorry ) and correctly handles the selectDive,
by using a IDX instead of the dive pointer, as dirk told me
it's extremely error-prone since the pointer can change.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's very important when programming via Model/View, in gtk or qt,
to not mess with the model data outside of the model. We were
deleting stuff that the model controlled outside of the model, so
it thought that there was still data there. This fixes the deletion
part, but there are also lots of other parts that I'll tackle in
the next commits.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In various occasions the branches of selected dives
got collapsed because I'm dummy boy and didn't programmed
the logic correctly.
This one correctly works for the few cases that I'v tried,
I'm verifying if the current selected index is a trip or
a dive, and asking to expand it.
The expanded state is lost because we delete and recreate
the model ( and we do that because we can switch between
tree and table model ).
Now I think we correctly track the cornercases.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch changes the string 'collapse' to a more meaningfull
'collapse others', it also scrolls the view to the first selec
ted index, since after collapsing the others, things could be
in the wrong position.,
Fixes#233
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No need to add more code to Subsurface by bringing in std::string too.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I probably broke this a while ago, as I was not using the big
dirk dive file to test ( just using some random files over the
test folder. )
Now it's working as it should.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixes the last column adding a horizontal scroll on the dive list,
since we have the hability to show / hide columns, I had to create
a helper method to discover what is the last column and set the
size of it very small so no scroll is created.
Also, I'v set the setStrechLastSection to true. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We remember what was selected before and restore it. Maybe there's a more
"Qt way" of doing this, but my implementation appears to work :-)
Also remove unconditional debug output that snuck into an earlier commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When right clicking a dive on the divelist a dialog for selecting a dive
was opened. However, Save As requires a getSaveFileName dialog so that
user can give a new file name as well as selecting an old file to
overwrite.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the argument could be made that this is just a symptom of Subsurface
getting very confused about the selection (which it still gets at times -
most likely we are calling select_dive() instead of selectDive() (or the
corresponding deselect functions) in places where we shouldn't), but
either way, we should not crash.
Fixes#220
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch saves and restores the state of the TreeView after the user
clicks on another columns that will make the tree disappear. All of the
branche states are saved, this way the expanded nodes will be restored
when the user gets back to tree mode.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a try: when the user changes the orientation on the columns
by clicking on the title of them and organizing by something that's
not the number, we lost track of the opened branches. this commit
doesn't fix that, but it fixes a possible similar issue.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
I got a bit lost trying to find the code that handled DiveList columns
today, so I thought it was better to move it to its file, after all we
do have a divelistview.h :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When merging dives, the indices of the following dives change - so we need
to adjust the variable used in the for_each loop.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A call to DiveListView::reload always reset our sortcolumn to be 0.
Instead we are tracking the correct sort column and sort direction.
This also removes an obsolete private member that was unused.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Implement exporting in UDDF format as was done in Gtk version. File menu
exports all the dives, right click on selection exports the selected
ones.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The popup menu entries should be all lowercase.
Also we should handle this the same as regular save and open when it comes
to remembering the last path.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the 'Save As' option on the dive list,
very straigth forward, just simple and beauty.
tested and working.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I just went thru all of subsurface code removing
some whitespaces issues and trying to make the
code prettyer, I also removed a few QString issues.d
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Some columns are a nice addition, but not a must have,
and thus are hidden-by-default, uncluttering the user interface.
This was discussed with a few designers before writting the code,
and also discussed with dirk on irc.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Instead of getting data from Qt just use our internal notion of the number
of selected dive to decide if more than one dive is selected (and
therefore if we need to show the 'merge dives' option in the context
menu).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is fairly straight forward. What I dislike is the check for the magic
number of "14 indeces". I'm sure there's a better way to tell if more than
one dive is selected...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Things need to be cleared out and disabled. But fixing this bug leaves
another issue - while the newly selected dive after a delete acts as if it
was selected, it doesn't show up as selected in the dive list.
Reported-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes a thing that I run into when trying to implement
the multi-edition system. Whenever a dive was selected, via mouse
or keyboard, it had two stages: first, it would select the previous
and the current ( and thus, render the profile of the current) and
then whould release the previous and select the current again ( and
thus, rerendering the profile again, plus a few other things. )
With the multi-edition system this caused a more severe bug, since
the edition of the dives is directly applied as soon as the text fields
changes, as soon as we selected any dive on the list, the 'before' dive
would be modified by the 'current'. This patch fixes this - but since it's
just a 'code removal' patch, this can led to bad things in the future,
I tested it quite a bit, but didn't found anything, no regression.
*fingers crossed.*
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
So during my Maui trip, I had a short hiatus in diving, causing
subsurface to start a new trip for the last day of diving. I could have
just started the old gtk branch to fix it up, but decided that I might
as well try to implement the "merge trip" logic in the Qt branch instead.
This is the end result of that.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
