the variables are set through set functions in DivePlannerPointsModel,
but read via getters from qPrefDivePlanner.
Variables:
drop_stone_mode
last_stop
switch_at_req_stop
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
change local setBailout to plannerShared and update connect.
change signals to slots in plannerShared
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
planner_deco_mode is not set in diveplanner.cpp, but instead
signals a slot in plannerModel.
reserve_gas is not set in diveplanner.cpp, but instead
signals a slot in plannerModel.
change signals to slots in plannerShared
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These are simple pass-through functions (normally optimized away
by the compiler), and serve to make a consistent backend interface
which have a simpler use especially in QML.
Variables:
dobailout
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
the variables are set through set functions in DivePlannerPointsModel,
but read via getters from qPrefDivePlanner.
Variables:
planner_deco_mode
reserveGas
safetyStop
gflow
gfhigh
vpmb_conservatism
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
add diveplannermodel to GENERIC instead of DESKTOP
as a consequence other models are need, move those
from DESKTOP to GENERIC
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
commands (undo) are not available for mobile, but diveplannermodel
is needed
add #ifndef MOBILE around Commands::
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit a4d299e01e ("mobile-widgets/qml: use showPin/oldStatus consistently")
one instance of rootItem.showPin wasn't replaced with prefs.showPin and as a
result we had a very strange password entry line in the middle of the PIN entry
screen.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
StartPage does not belong in divelist.
Remove startPage from diveList and anchor in main.
Make needed functional changes.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
DiveList should not depend on StartPage, so remove references to
startPage.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instanciate DiveList like all the other pages.
Move DiveList properties set in main to DiveList.qml
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
setupActions() in StartPage contained a mixture of StartPage
actions and DiveList actions.
Split setupActions to be pure.
However currently StartPage is embedded inside DiveList so the
action onVisibleChanged must be simulated.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
manager.finishSetup() have nothing to do with startpage/divelist,
but belong in main (seeing main as responsible for setup and window layout).
Move onCompleted functionality to main.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
cloudPassword is no longer used as a temporary variable
Remove cloudPassword from QMLPrefs.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace prefs.cloudPassword with PrefCloudStorage.cloud_storage_password in QML
Replace QMLPrefs.....cloudPassword with PrefCloudStorage::cloud_storage_password in C++
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace prefs.cloudUserName with PrefCloudStorage.cloud_storage_email in QML
Replace QMLPrefs.....cloudUserName with PrefCloudStorage::cloud_storage_email in C++
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user asked to change credentials it is equivalent to a signout,
so no need to store old credentials. This simplification allows removal
of the temporary credentials in qmlPrefs.
this commits secures the user is locked in the login page, until one
of 3 things happen:
- enter verified credentials (divelist is loaded from cloud)
- select no-cloud mode (divelist is loaded from local)
- enter new credentials, PIN page shows, enter PIN or
cancel (back to enter credentials).
This is consistent even if the program is restarted.
Old version had a non consistent way:
A user enters new credentials,
sees the PIN screen,
but does not receive the email immediately,
so works with other applications (causing the mobile app to close)
Having received the email with the PiN,
the user starts mobile again,
BUT does not see the PIN screen, instead the old credentials are used.
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Call saveCredentials with username/password to avoid first
setting the two and then calling.
Change saveCredentials() to use newUser, newPassword.
Signed-off-by: Jan Iversen <jani@apache.org>
This commit does some final cleaning up to the code, mostly deleting
white space and comments.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Write a test program to test the log tab in the preferences main menu
I am a bit skeptical about the accuracy of the last section that
delas with testing signals.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a separate preferences tab for resetting all preferences to their default values.
One or two very small alterations to other sections of the preferences UI code.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a tab for dive log - related preferences.
A suitable test programs is still required.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a preferences tab for dive download, allowing resetting the
buttons representing download connections in the Download panel.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a companion for the new Media tab in the Preferences UI
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the preference settings dealing with thumbnails (currently under
General preferences and Profile preferences) and put them in a newly-created
Media preference tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the "Show unused cylinders" checkbox (Profile tab) and the
"Set default cylinder" qTextEdit box (General tab) and put them in a
separate and new Equipment tab. This sounds like a simple task but,
as can be seen from the files changed, was actually a complex matter.
Adapt the existing test programs (General and TechDetails) for creating
a test program that tests parts of the Equipment tab.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sometimes the tests will fail with "missing plugin", the suggested
solutions are
a) reinstall Qt
or
b) export a PLUGIN_PATH variable
Signed-off-by: Jan Iversen <jan@casacondor.com>
WARNING: multi directory commit, needed to secure it builds.
move the core/plannerShared.* to backend-shared.
update CMakeLists.txt to include backend-shared lib in link process.
update ios project to reflect new directory
Signed-off-by: Jan Iversen <jan@casacondor.com>
WARNING: multi directory commit, needed to secure it builds.
move the core/exportfuncs.* to backend-shared.
update backend-shared/CMakeLists.txt to generate backend-shared lib
update CMakeLists.txt to include backend-shared lib in link process.
update ios project to reflect new directory
Signed-off-by: Jan Iversen <jan@casacondor.com>
WARNING: multi directory commit, needed to secure it builds.
leaving the shared backend sources in core, imposes a severe limitation,
that they cannot make use of e.g. qt-models, because that is created
after core (first library to be created).
The shared backend uses functionality from core and qt-models, so it
must be created when those are available and before desktop-widgets
or mobile-widgets are created.
Make a new root directory "backend-shared" with empty CMakeLists.txt
Signed-off-by: Jan Iversen <jan@casacondor.com>
Remove aliases for showPin/oldStatus and reference prefs.showPin/oldStatus directly.
showPin/oldStatus are "temporary" variables, that are not saved in settings,
so they easily be replaced
Signed-off-by: Jan Iversen <jani@apache.org>
Save_password_local is default set to false, meaning new users
have to find out how to allow it.
set save_password_local to true for mobile, which is normal behaivour
on mobile apps.
Signed-off-by: Jan Iversen <jani@apache.org>
change the settings variables using UNIT_FACTOR to use
plannerShared instead.
There are no changed functionality, it is simply removing calculations
from the UI.
Signed-off-by: Jan Iversen <jan@casacondor.com>
qPrefDiveplanner contains settings for ascent and descent in a neutral format.
diveplanner desktop uses a macro UNIT_FACTOR to convert between UI values and
qPref values.
In order not to dublicate these calculation (in C++ and QML) a set of shared
functions are made. The functions are identical to the calculations in diveplanner
desktop.
Signed-off-by: Jan Iversen <jan@casacondor.com>
