move #include prefs-macros from SettingsObjectWrapper.h to SettingsObjectWrapper.cpp
include dive.h directly (only part of prefs-macros.h used) in preference classes
Signed-off-by: Jan Iversen <jani@apache.org>
If a thumbnail and the original picture can be accessed and the
modification date of the thumbnail is before the modification date
of the picture, recalculate the thumbnail.
This causes more disk access and might give strange effects for
picture files with messed up file timestamps (i.e. lying in the
future) or messed up computer clocks (i.e. running in the past).
Therefore, add a preference option to disable the new behavior.
Default is set to enabled.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This commit allows plotting the OC-equivalent pO2 graph for PSCR
dives. This happens in both the cases where there is no external
O2-monitoring AND when there is external pO2 monitoring. The
calculations are only done for PSCR dives and is achieved as
follows:
1) Within plot-info create a pressure-t called OC_pO2 in
profile.h and populate this variable with the open-circuit
pO2 values in profile.c.
2) Create a new partialPressureGasItem ocpo2GasItem in
profilewidget2.h and, in profilewidget2.cpp, initialise it
to read the plot-info OC_pO2 values and enable its
display by using the setVisible method. The
diveplotdatamodel was also touched in order to achieve
this.
3) Create a pref button that controls the display of OC-pO2 for SCR dives
4) Change the colour of the OC-pO2 grpah to orange
5) Change the connection of the crr_OC_pO2 signal to be appropriate
6) rename the OC_pO2 attribute to scr_OC-pO2
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
The preferences flag cloud_background_sync used to be used heavily in
the mobile code, but is not used there anymore. Now, it is accessed
only in one place, but does not do what it actually says: If it is off,
the remote storage is not synced on save (but will be synced on next
load).
Syncing on save can also be prevented by unchecking the "Cloud online"
menu checkbox. Since the latter seems more logical and general
(support for non-cloud remote git repositories), remove the cloud_background_sync
option.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Bool is the correct choice for this option.
int was used before because it was not clear to me how and if I can use
bool in this C file.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
In general, the C++-side of the preferences code consistently uses
the bool data type for boolean settings. There are five exceptions,
which use short instead:
showPo2
showPn2
showPhe
saveUserIdLocal
displayInvalidDives
This patch attempts to make the code more consistent by turning
these into bools as well.
Tests showed that writing as short and reading as bool is handled
gracefully by the Qt variant code. Therefore, an upgrade should not
cause user-visible changes to their settings.
As a bonus, two extern declarations of the set_save_userid_local()
function, which is not defined anywhere, were removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, on Linux, after selecting a Bluetooth device the name of the
device is shown. On reopening the download dialog, on the other hand,
the address is shown. In the device selection dialog both are shown.
This patch changes the download dialog such that both, name and address,
are shown. The bulk of the patch introduces the name of the device in
the preferences and DCDeviceData. It has to be noted that DCDeviceData
is an encapsulation of the libdivecomputer device_data_t. Nevertheless,
the new Bluetooth-name field is, at the moment, not passed through to
libdivecomputer.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This option should have never been there. This is not how
gradient factors are supposed to work. It would only trick
users to use the wrong value..
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Nothing really special here. Just a split of the only p02 max threshold into
a min threshold and max threshold, and the adaptation of the UI. Change of
translatable strings included.
ref: https://github.com/Subsurface-divelog/subsurface/issues/259
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Add minimum gas calculation to planner output.
Add the two UI parameters prefs.sacfactor and prefs.problemsolvingtime.
Connect UI signals and slots for recalculation of diveplan.
Disable minimum gas calculation if there was already a warning before.
If minimum gas result is larger then cylinder start pressure give warning message instead of result.
Add line break before pO2 warnings but only if warnings exist.
Signed-off-by: Joachim Ritter <jritter@bitsenke.de>
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
We had (in the wrong place, imo) a new feature that
should differentiate the different deco_modes, you could
plan your dive in buelhman and see it in vpm-b, for instance
but both of them accessed the same pref.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixes a couple of issues with the tests.
Also, a type in prefs.h is "short" while it's actually
a boolean, this made me write the wrong testcase for this.
Fixed this by setting the Qt wrapper to bool, but I didn't
changed the c implementation because I tought I could break
something.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Separate the VPM-B conservatism preference into diveplan.vpmb_conservatism for
planning dives and prefs.vpmb_conservatism for profile ceiling display of
saved dives.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With the recent setting cleanup, gradient factors were set to bool, so were
saved as 1/1, rather than say 50/80. This commit fixes that.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit b76c1846bb ("Settings update: Simplify Update Manager")
the logic for when to show the UpdateManger question to the user got
broken. Unintuitively, a boolean setting actually has three possible
values. True, False, and Unset. This patch fixes things to work as
designed again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move Preferences sync / initialization out of the planner
widget prerferences to the ObjectWrapper.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For some reason, the dive computer settings weren't in the
settings prefs. This moves it, makes the boilerplate on Settings
ObjectWrapper and make things compile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So, prefs.save_userid_local is being set outside of
a preferences set (it's set to true and false while
loading the files via xml or git) and because of that
I had to bypass a few method calls.
When something triggers a preferences change, the
application will be notified that the preferences
changed, thing that I couldn't do while reading the
xml or git because that should be local-only.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous patch (Planner: add best mix EAD preference) used the term EAD
(equivalent air depth) in variable names and strings, when it should have been
END (equivalent narcotic depth).
They're not the same thing and shouldn't be confused.
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add best mix EAD preference and UI, along with a tooltip describing what it
does
Signed-off-by: Rick Walsh <rickmwalsh@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
2016-04-04 22:33:58 -07:00
Renamed from subsurface-core/subsurface-qt/SettingsObjectWrapper.h (Browse further)
