When we load sample data from a git save-file, we always default to
using the state from the previous sample (except for the special case of
cylinder pressure where an empty value does not mean "same", but
"interpolate", see core/load-git.c: new_sample()).
But the corollary to that is that it's always redundant to save sample
data that hasn't changed since the previous sample.
For some reason, the rbt, bearing and heartrate sample data didn't
follow that rule, and instead saved with lots of extra reduncancy.
(The alternative would be to clear those samples at load time, and make
them act like the pressure data, but it would appear that all these
three values may as well just have the normal "if no change, don't save
them" semantics).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a very timid start at making us actually use multiple sensors
without the magical special case for just CCR oxygen tracking.
It mainly does:
- turn the "sample->sensor" index into an array of two indexes, to
match the pressures themselves.
- get rid of dive->{oxygen_cylinder_index,diluent_cylinder_index},
since a CCR dive should now simply set the sample->sensor[] indices
correctly instead.
- in a couple of places, start actually looping over the sensors rather
than special-case the O2 case (although often the small "loops" are
just unrolled, since it's just two cases.
but in many cases we still end up only covering the zero sensor case,
because the CCR O2 sensor code coverage was fairly limited.
It's entirely possible (even likely) that this migth break some existing
case: it tries to be a fairly direct ("stupid") translation of the old
code, but unlike the preparatory patch this does actually does change
some semantics.
For example, right now the git loader code assumes that if the git save
data contains a o2pressure entry, it just hardcodes the O2 sensor index
to 1.
In fact, one issue is going to simply be that our file formats do not
have that multiple sensor format, but instead had very clearly encoded
things as being the CCR O2 pressure sensor.
But this is hopefully close to usable, and I will need feedback (and
maybe test cases) from people who have existing CCR dives with pressure
data.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We currently carry two pressures around for all the samples and plot
info, but the second pressure is reserved for CCR dives as the O2
cylinder pressure.
That's kind of annoying when we *could* use it for regular sidemount
dives as the secondary pressure.
So start prepping for that instead: don't make it "pressure" and
"o2pressure", make it just be an array of two pressure values.
NOTE! This is purely mindless prepwork. It literally just does a
search-and-replace, keeping the exact same semantics, so "pressure[1]"
is still just O2 pressure.
But at some future date, we can now start using it for a second sensor
value for sidemount instead.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some Petrel 2 computers are dual stack. We need to list the Petrel here as well
since the Petrel 2 actually identifies itself via BT/BLE as Petrel and we can't
tell them appart until after we started a download.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is both correct (many Perdix support BLE) and necessary
as the Perdix AI identifies itself (sadly) as Perdix.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixes: #490 items 1) and 2).
1) Reference to isBluetooth.leftPadding is removed as the isBooltooth
checkbox is gone.
2) Do not set background color of downloaded dives. The checkbox is used
to denote "selected or not".
In addition, incorrect references to subsurfaceTheme.PrimaryColor (which
does not exist) are replaced by the correct subsurfaceTheme.primaryColor.
Finally, an obvious copy/paste error width: childrenRect.height. that
is supposed to be width: childrenRect.width.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This commit adds the capability to cancel a running download from DC.
The actual cancel is fully handled in the underlying libdivecomputer
code. As the user may be interested in the dives downloaded up to
the moment of cancel, do not just close the download screen (as
it was before this commit). Now, the <quit> button changes to
<cancel> when the download is started, and pressing cancel, only
cancels the download and does not close the download screen, but
presents the so far downloaded data. When no download is running,
the <quit> button just quits the screen as before.
Fixes: #485
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trucate the logfile on open to remove any data from previous sessions.
This confused me very much, as the new logfile started from the
top, leaving old data on the bottom.
Also added system date for easy reference.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The adapted define was confusingly wrong. Apparently, the BUFSIZ
define was coming from some include file, and was dependent on
platform (Linux 8K, Andorid 1K). Simple rewrite to a new define
and a proper value for both Linux and Android. If 4K is big
enhough, is a little uncertain, as its depends on the read
behavior of all libdivecomputer parsers using this serial
BLE interface.
The buffer size needed (on read, as that is the most prominent
direction when interfacing with DCs) is (most likely) 2x the
maximum block the libdc parsers request at once. I did not
study all parsers, but the Shearwater parser request 20 bytes
at once (we know that from the 1 packet at the time read, we
had before). The OSTC parser request 1K blocks for data
that is longer than 1K (like profiles, header tables).
The 1K we had on Android was working for Shearwater,
Eon Steel, but not for OSTC,as its reads 1K at the time
at max, and overflowing the buffer.
So 32k or 64k seems way to big (as in, much bigger than
any libdc read).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The connection already clearly defines whether this is Bluetooth or not.
No reason for the separate checkbox.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No idea why this now shows up as an error in the iOS build.
We need to refer to the typedef, not the underlying struct.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I wonder if we even need this anymore at all as the connection
clearly determines whether this is a BT download or not.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we can't find a match, just leave it unchanged. This way, if we
mis-recognize a device, the user can correct the product (or even
vendor) without losing the correct connection.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
libdivecomputer asks pkg-config for the include paths for libusb-1.0 and
hidapi, but then uses #include <libusb-1.0/libusb.h> and <hidapi/hidapi.h>
which fails as those directories are part of the include path. So we
manually add include paths without that last directory as well as a work
around.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I really want to build against 10.10 so as many people as
possible can use the binaries I create, but regular users
might not have the older SDKs installed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add styling to the GPS fixes page.
The background color of the swipe list objects is wrong and also the icon overlay. This is a Kirigami issue.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
The built in theme in Kirigami has special variables for sertain objects, this sets the correct color for each object to match our themes.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
THe editable textboxes rely on the material theme to set the correct colors. This sets the appropriate colors for each theme.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
