In DivelogsDeWebServices::updateProgress() QProgressBar::setRange()
and QProgressBar::setValue() were passed floats even though they
expect ints. To silence a compiler warning, cast by hand. Use the
lrint() function, since we generally do it this way. However,
it is not clear whether this is necessary here.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Use doUpload() from uploadDiveLogsDE
Connect signals from uploadDiveLogsDE to do UI part.
Clean slots to only contain UI.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Do not prepare zip file, just because user selected the divelogs.de
radiobutton
Move prepareDives to startUpload (slot handling user clicking on
upload button).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Clean prepareDivesForUpload() and uploadDives() so that
uploadDives() only contain network handling no UI.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Use qPrefCloudStorage for divelogde_user/password to secure same
handling as other settings, as well as same handling as used in
shared uploadDiveLogsDE class
Signed-off-by: Jan Iversen <jan@casacondor.com>
Remove local implementation (prepare_dives_for_divelog) and call
uploadDiveLogsDE::prepareDives, which are shared between
mobile and desktop
Signed-off-by: Jan Iversen <jan@casacondor.com>
Since we now have a selection.c translation unit, put the selection-
related functions there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the future we might want to use undo-commands for mobile as
well (even if not implementing undo).
Therefore, move the undo-command source from desktop-widgets
to their own commands top-level folder.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A number of architecture-dependent functions were declared in
dive.h. Move them to file.h so that not all file-manipulating
translation units have to include dive.h. This is a small step
in avoiding mass-recompilation on every change to dive.h
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declarations of the "report_error()" and "set_error_cb()"
functions and the "verbose" variable to errorhelper.h.
Thus, error-reporting translation units don't have to import the
big dive.h header file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions were spread out over dive.c and divelist.c.
Move them into their own file to make all this a bit less monolithic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of setting dive->dive_site directly, call the
add_dive_to_dive_site() and unregister_dive_from_dive_site()
functions. In the parser this turned out to be a bit tricky.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declaration of these functions to "file.h" and "parse.h"
according to the translation unit they are defined in. Thus, not
all users of "dive.h" have to suck in "sqlite3.h".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As opposed to dive trips, dive sites were always directly added
to the global table, even on import. Instead, parse the divesites
into a distinct table and merge them on import.
Currently, this does not do any merging of dive sites, i.e. dive
sites are considered as either equal or different. Nevertheless,
merging of data should be rather easy to implement and simply
follow the code of the dive merging.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To extend the undo system to dive sites, the importers and downloaders
must not parse directly into the global dive site table. Instead,
pass a dive_site_table argument to parse into.
For now, always pass the global dive_site_table so that this commit
should not cause any functional change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All these aren't actually things that need fixing, they are observations about
the code.
Given that LGTM.com reports FIXME comments as Alerts, let's change the ones
that aren't about things that need fixing to something more harmless.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
process_imported_dives() takes four boolean parameters. Replace these
by flags. This makes the function calls much more descriptive. Morover,
it becomes easier to add or remove flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If this flag is set, dives that are not assigned to a trip will
be assigned to a new trip. This flag is set if the user checked
"add to new trip" in the download dialog of the desktop version.
Currently this is a no-op as the dives will already have been
added to a new trip by the downloading code. This will be removed
in a subsequent commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
On desktop, replace all add_imported_dives() calls by a new undo-command.
This was rather straight forward, as all the preparation work was done
in previous commits.
By using an undo-command, a full UI-reset can be avoided, making the UI
react smoother.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Split the process_imported_dives() function in two:
1) process_imported_dives() processes the dives and generates
a list of dives and trips to be added and removed.
2) add_imported_dives() calls process_imported_dives() and
does the actual removal / addition of dives and trips.
The goal is to split preparation and actual work, to
make dive import undo-able.
The code adds extra checks to never merge into the same
dive twice, as this would lead to a double-free() bug.
This should in principle never happen, as dives that
compare equal according to is_same_dive() are merged
in the imported-dives list, but perhaps in some pathologival
corner-cases is_same_dive() turns out to be non-transitive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing log-files we generally want to merge trips. But
when downloading and the user chose "generate new trip", that
new trip should not be merged into existing trips.
Therefore, add a "merge_all_trips" parameter to process_imported_dives().
If false only autogenerated trips [via autogroup] will be merged.
In the future we might want to let the user choose if trips
should be merged when importing log-files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old way of merging log-files was not well defined: Trips
were recognized as the same if and only if the first dives
started at the same instant. Later dives did not matter.
Change this to merge dives if they are overlapping.
Moreover, on parsing and download generate trips in a separate
trip-table.
This will be fundamental for undo of dive-import: Firstly, we
don't want to mix trips of imported and not-yet imported dives.
Secondly, by merging trip-wise, we can autogroup the dives
in the import-data to trips and merge these at once. This will
simplify the code to decide to which trip dives should be
autogrouped.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To allow parsing into arbitrary trip_tables, add the corresponding
parameter to the parsing functions and the parser state. Currently,
all callers pass the global trip_table so there should be no change
in functionality. These arguments will be replaced in subsequent commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Rename
- dive_get_insertion_index() -> dive_table_get_insertion_index()
- unregister_dive_from_table() -> remove_from_dive_table()
- get_idx_in_table() -> get_idx_in_dive_table()
- sort_table() -> sort_dive_table()
This will make it more straight-forward to generate these functions
from macros.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Capitalize the first letter of error message sentences in this
file to be consistent with other error messages in this file
and across the project.
[Dirk Hohndel: edit to remove the changes to the .ts files]
Signed-off-by: John Plaxco <john@johnplaxco.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If no dives are selected when trying to export a selection, a message
is shown that no dives were selected, but it's immediately hidden
behind a message saying that a temporary file could not be created.
In fact, the creation of the temporary file wasn't never attempted,
so the message that the user actually sees is misleading.
The solution chosen here is to duplicate the check that at least some
dives are selected, and abort early if that case is detected, rather
than continuing on to show the additional misleading message. Not
elegant, but it gets the job done.
Better solutions to this include refactoring prepare_dives_for_divelogs
to return something more descriptive than a bool, remove that check
from prepare_dives_for_divelogs entirely since it doesn't seem to be
a good fit there, or switch to exceptions for handling these problems
rather than return values. I don't have sufficient familiarity with
the codebase to attempt these more invasive changes, but they
should be considered in the future.
On a final note, some of the other error messages in this file start
with a capital letter, but the one relevant to this particular PR
does not. Again, I'm not familiar enough with the codebase (or
translations) to know if that's safe to change, so I'll leave that
for another time or another developer.
Reported-by: John Plaxco
Signed-off-by: John Plaxco <john@johnplaxco.com>
Replace the UUID reference of struct dive by a pointer to dive_site.
This commit is rather large in lines, but nevertheless quite simple
since most of the UUID->pointer work was done in previous commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of having people treat latitude and longitude as separate
things, just add a 'location_t' data structure that contains both.
Almost all cases want to always act on them together.
This is really just prep-work for adding a few more locations that we
track: I want to add a entry/exit location to each dive (independent of
the dive site) because of how the Garmin Descent gives us the
information (and hopefully, some day, other dive computers too).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
process_imported_dives() is more efficient for downloaded than for
imported (from a file) dives, because it checks only the divecomputer
of the first dive.
This condition is checked via the "downloaded" flag of the first
dive. Instead, pass an argument to process_imported_dives().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Dives were directly imported into the global dive table and then
merged in process_imported_dives(). Make this interface more flexible,
by passing an independent dive table.
The dive table of the to-be-imported dives will be sorted and merged.
Then each dive is inserted in a one-by-one manner to into the global
dive table.
This actually introduces (at least) two functional changes:
1) If a new dive spans two old dives, it will only be merged to the
first dive. But this seems like a pathological case, which is of
dubious value anyway.
2) Dives unrelated to the import will not be merged. The old code
would happily merge dives that were not even close to the
newly imported dives. A surprising behavior.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
UserSurveyServices derives from WebServices and therefore has
to define three pure virtual functions [startDownload(),
startUpload(), buttonClicked()] as no-ops. Interestingly,
a comment in the header says
"need to declare them as no ops or Qt4 is unhappy"
which is of course not true as these functions are not
declared by Qt.
There seems to be no point in deriving from WebServices,
therefore don't do it. These function definitions can then
be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
process_dives() is used to post-process the dive table after loading
or importing. The first parameter states whether this was after
load or import.
Especially in the light of undo, load and import are fundamentally
different things. Notably, that latter should be undo-able, whereas
the former is not. Therefore, as a first step to make import undo-able,
split the function in two versions and remove the first parameter.
It turns out the the load-version is very light. It only sets the
DC nicknames and sorts the dive-table. There seems to be no reason
to merge dives.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a checkbox that triggers replacement of all English characters by
x's in notes, buddy, dive guide and (while we are at it) suit.
This is ment for people sharing logs for debugging that are concious
about privacy issues. It leaves the lenth of strings in tact as well
as special charcters as those might be needed to track down a particular
parsing problem.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Actually remove the Subsurface webservice UI from the source, and
deal with all the fallout.
Notice that a part of the change in subsurfacewebservices.cpp is
a block of code that becomes unused, but might contain some valid
logic to be used later. Very similar code is in core/gpslocation.cpp.
And as I earlier broke something here, the unused code is ifdef-ed for
now.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
To enable undo of divelog-importing it is crucial that parse_file()
can parse into arbitrary dive tables.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
remove CloudStorage from SettingsObjectWrapper and reference qPrefCloudStorage
update files using SettingsObjectWrapper/CloudStorage to use qPrefCloudStorage
this activated qPrefCloudStorage and removed the similar class from
SettingsObjectWrapper.
Signed-off-by: Jan Iversen <jani@apache.org>
There were two catch-all classes for translations outside of class
context. gettextFromC was used exclusively from C, but C++ used
both, gettextFromC and QObject. Some of the string were even present
in both. Therefore, unify to gettextFromC throughout the code base.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
According to Qt's documentation, the application exits if all windows
with the WA_QuitOnClose attribute are closed. This attribute was cleared
for three dialogs. This seems not necessary because:
1) The application can't be closed as long as the modal dialog is shown.
2) The flag only concerns primary windows, which these are not.
See: http://doc.qt.io/qt-5/qguiapplication.html#quitOnLastWindowClosed-prop
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
helpers.h included qthelper.h and all functions declared in helpers.h
were defined in qthelper.h. Therefore fold the former into the latter,
since the split seems completely arbitrary.
While doing so, change the return-type of get_dc_nichname from
"const QString" to "QString".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This reverts commit 70e0e80de5.
This caused the GPS workflow to break for Linus. Let's revert
for 4.7.8 and figure out how to do this cleanup correctly, later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit fc7729eb78.
This caused the GPS workflow to break for Linus. Let's revert
for 4.7.8 and figure out how to do this cleanup correctly, later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
