We assumed that a trip was selected when all of its dives were selected
instead of just remembering if the trip itself was selected. I'm sure
there was a reason for that but I cannot think of any. But a side effect
is that if you have a trip with only one dive in it and have that one dive
selected and edit it, after saving your changes you end up on the trip
(which is now also selected) and are no longer on the dive. And that seems
quite wrong.
The new code simply remembers that the trip was selected. And selects it
again if it was.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we run out of space in the Uemis filesystem we return an error. The
user could reasonably unplug the SDA, insert it again and then retry to
continue the download (that's what we tell them to do). In that case we
need to make sure we start at the correct dive otherwise the same dives
keep getting downloaded over and over again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dialog didn't accept "OK" and store the dives downloaded / selected so
far if there had been an error. Especially with partial downloads from the
Uemis SDA this is something that is quite reasonable to want to do, so
allow exiting the dialog with OK even after an error.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the functionality to undo/redo removing of dives from trips. The
code calling remove_dive_from_trip has moved to the UndoCommands class.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Planned dives must be replanned while manually added dives must be edited.
Show error messages to handle wrong user input.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since most regulators have an intermediate pressure of 10bar
the minimum value is 10 while the max is 99.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With the addition of gas reserves in recreational mode
we need to make sure that the first leg is short enough
that we have more gas left than the specified reserve
even when using small cylinders like LP72.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
OSTCTools is a windows based software by Robert Angeymar which performs
configuration upgrade, memory analysis and download tasks for H&W OSTC
devices.
Downloaded dives are stored in files (one archive each) with the raw
binary data heavily padded at the begining of the file, and some other
data not included in H&W dive header protocol as the device's serial
number.
The import function simply takes the raw data part of the file and lets
libdivecomputer do the parseing.
Then adds some additional info as OSTC reported dive number and serial
device number.
Please note that OSTCTools is *not* a real logging software, it simply
gets the DC raw data, so there isn't any information about dive site,
equipment and so.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adopts the planner to the needs of the recreational diver. Rather than immediately
starting to ascent doing deco stops this mode, this mode stays at the last manually
entered depth for the maximal time before mandantory stops appear (NDL). It does not
change gas but keeps using the last used cylinder.
TODO: * Grey out unused UI elements of the planner in this mode
* Start ascent before gas runs out (or into reserve)
* Do a 3min @ 5m safety stop.
Fixes#840
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Once a manually added dive is part of a trip and this trip
is edited, applying the modifications leaves the dive profile
in edit mode (e.g. points can be dragged and gas swapping can
be applied).
The issue can be viewed from another angle. Why enable
profile edits of a manually added dive which is in a trip,
while the trip is being edited in the first place?
If there are more than one manually added dives in said trip
we are enabled to edit one of the dive but probably
it's not intended to modify all manually added dives after the
changes are applied for the trip.
This patch disables the functionality in question and it also...
Fixes#864
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
once the manual added dive is added it can't be edited directly, This
can be fixed by adding an edit button to the log menu, this will be
consistent with the plan/replan buttons.
Fixes#847
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds to the prefs struct the variables last_stop, verbatim_plan,
display_runtime, display_duration, and display_transitions from the
planner so their values are saved from one session to the next.
The widgets for some of those settings had default values in
plannerSettings.ui; remove them since the new code in
subsurfacestartup.c takes care of initializing them.
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Non-static class member recalc is not initialized in the constructor
Signed-off-by: Marcos CARDINOT <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Non-static class member multipart is not initialized in the constructor
Signed-off-by: Marcos CARDINOT <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This add support for Seabear's new import format that is used by H3 and
T1. In the future also the Hudc should switch to the new format. The
main difference to the old one is that time stamps are no longer
recorded in the samples, but intervali is specified in the header.
The header contains other useful information as well that we should
build support for. E.g. surface pressure, gas mixes, GF, and mode might
be useful additions later on.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When an user opened the "Save as" dialog and pressed the
cancel button a null string was returned. Therefore the
file_save_as function returned an error which was lately
shown when the file_save function was called.
Now the function checks if the cancel/exit button was
pressed and returns.
Fixes#844
Reported-by: longjohnsilver
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
test case:
1 - make sure that you DO NOT have anything selected on the 'Dive list;
2 - in the menu bar, click on 'Log'->'Re-plan dive';
3 - crash!
Fixes#858
Signed-off-by: Marcos CARDINOT <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The current code is dereferencing the null pointer 'profWidget'.
It can cause a segmentation fault.
Signed-off-by: Marcos Cardinot <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Even that most (or all) tables have the remove button at the section 0, the method defaultColumnWidth should not assume that it will always be true.
This patch will consider the title width of each section, instead of using a static width (which cause problems when the language is not en).
Signed-off-by: Marcos Cardinot <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When loading an image by filename and by hash fails, try to interpret
the filename as URL and download the image.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Coming back from a dive site edit we must not call refreshDisplay() or
otherwise the edits on the displayed_dive are overwritten.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise it will show outdated information. If the user edits the
location name and then clicks 'manage' we need to make sure that the
correct site is shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The char pointer was out of scope by the time we created the dive site.
Also remove the misleading comment above - it really makes sense to do
nothing in that function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added label in the ShiftImageTimesDialog which appears when
not all of the selected images have timestamp in the checked range.
Made cancel button in this widget actually work.
Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seperated getting image timestamp from picture_load_exif_data() and
ShiftImageTimesDialog::syncCameraClicked() into picture_get_timestamp()
and seperated checking timestamp from dive_create_picture() to
dive_check_picture_time().
Signed-off-by: Jan Darowski <jan.darowski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Field name changes should change all the occurrences... We ended up with
field index of -1 for average depth due to mixing field names.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As flo269 suggested in bug #507, a full view of Earth would be better
when a dive has no coordinates.
Fixes#507
Reported-by: flo269
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the ability to choose either to export photos or not.
Patch is attached.
--
regards,
Gehad
From 6476e1227b72d8297f9aecc2e6cc6f70d07f87ae Mon Sep 17 00:00:00 2001
From: Gehad elrobey <gehadelrobey@gmail.com>
Date: Fri, 13 Mar 2015 15:31:24 +0200
Subject: [PATCH] Make exporting photos with HTML optional
Add the option to enable/disable exporting photos with the HTML.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
profilewidget2.cpp:1398:25: warning: the omitted middle operand in
?: will always be 'true', suggest explicit middle operand [-Wparentheses]
profilewidget2.cpp:1403:39: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Points (handles) from the last dive ADD operation remain on
the profile unless we clear them.
fixes#846
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The point graphics are allocated but doens't seem to be
deleted anywhere. We attempt to fix that in clearHandlers().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Given that we might be adding a gas change event at t = 0 we need to check
for both that and t = time_or_first_sample.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
t = 0 isn't really special here. We shouldn't allow two gas changes at the
same time, period.
We also can do away with the special handling to mark the dive list
changed and replot things if a gas change gets removed. That's done at the
end of this function either way.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the existing gas change events @0:00 when new
one is added @0:00.
Signed-off-by: Yousef Hamza <jo.adam.93@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When zoomed in, things like moving planner points is not possible,
but if the user attempts that, replan() -> plotDive() is called
and the zoomLevel should be reset to the default value (we don't
really want that), but instead it's lost for some reason
(as the user reports: "Somes times, it changes to 100% which is ok").
If moving points becomes possible eventually while zoomed in,
we need to figure a way to replot without resetting the zoom level
in plotDive().
Fixes#851
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In practice this will sanitize Windows line terminations (discard the
carriage return);
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This function was missing the check if setting that field actually changes
what's already in the data structure.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This may seem much more complicated but actually is much cleaner. Add each
thread we start to the list of future results and add a new UI function
that updates the UI once all of the threads have finished.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sequentially parses a file, expected to be a Datatrak/WLog divelog, and
converts the dive info into Subsurface's dive structure.
As my first DC, back in 90s, was an Aladin Air X, the obvious choice of log
software was DTrak (Win version). After using it for some time we moved to WLog
(shareware software more user friendly than Dtrak, printing capable, and still
better, it runs under wine, which, as linux user, was definitive for me). Then,
some years later, my last Aladin died and I moved to an OSTC, forcing me to
look for a software that support this DC.
I found JDivelog which was capable of import Dtrak logs and used it for some
time until discovered Subsurface existence and devoted to it.
The fact was that importing Dtrak dives in JDivelog and then re-importing them
in Subsurface caused a significant data loss (mainly in the profile events and
alarms) and weird location of some other info in the dive notes (mostly tag
items in the original Dtrak software). This situation can't actually be solved
with tools like divelogs.de which causes similar if no greater data loss.
Although this won't be a core feature for Subsurface, I expect it can be useful
for some other divers as has been for me.
Comments and issues:
Datatrak/Wlog files include a lot of diving data which are not directly
supported in Subsurface, in these cases we choose mostly to use "tags".
The lack of some important info in Datatrak archives (e.g. tank's initial
pressure) forces us to do some arbitrary assumptions (e.g. initial pressure =
200 bar).
There might be archives coming directly from old DOS days, as first versions
of Datatrak run on that OS; they were coded CP437 or CP850, while dive logs
coming from Win versions seems to be coded CP1252. Finally, Wlog seems to use a
mixed confusing style. Program directly converts some of the old encoded chars
to iso8859 but is expected there be some issues with non alphabetic chars, e.g.
"ª".
There are two text fields: "Other activities" and "Dive notes", both limited to
256 char size. We have merged them in Subsurface's "Dive Notes" although the
first one could be "tagged", but we're unsure that the user had filled it in
a tag friendly way.
WLog adds some information to the dive and lets the user to write more than
256 chars notes. This is achieved, while keeping compatibility with DTrak
divelogs, by adding a complementary file named equally as the .log file and
with .add extension where all this info is stored. We have, still, not worked
with this complementary files.
This work is based on the paper referenced in butracker #194 which has some
errors (e.g. beginning of log and beginning of dive are changed) and a lot of
bytes of unknown meaning. Example.log shows, at least, one more byte than those
referred in the paper for the O2 Aladin computer, this could be a byte referred
to the use of SCR but the lack of an OC dive with O2 computer makes impossible
for us to compare.
The only way we have figured out to distinguish a priori between SCR and non
SCR dives with O2 computers is that the dives are tagged with a "rebreather"
tag. Obviously this is not a very trusty way of doing things. In SCR dives,
the O2% in mix means, probably, the maximum O2% in the circuit, not the O2%
of the EAN mix in the tanks, which would be unknown in this case.
The list of DCs related in bug #194 paper seems incomplete, we have added
one or two from WLog and discarded those which are known to exist but whose
model is unknown, grouping them under the imaginative name of "unknown". The
list can easily be increased in the future if we ever know the models
identifiers.
BTW, in Example.log, 0x00 identifier is used for some DC dives and from my own
divelogs is inferred that 0x00 is used for manually entered dives, this could
easily be an error in Example.log coming from a preproduction DC model.
Example.log which is shipped in datatrak package is included in dives
directory for testing pourposes.
[Dirk Hohndel: some small cleanups, merged with latest master, support
divesites, remove the pointless memset() before free() calls
add to cmake build]
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code is the same that is used on the MainTab, but
since they are different objects, I can't just call it.
so I'm duplicating them for the time being.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code used to trigger the edit mode a long time ago
since now I'm re-reading the code to implement the
same stuff on the Location edit mode, I realized that
this is not needed anymore.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When using gasmixes where the difference is less than 2% the planner can't
caclulate casconsumptions correctly. This sets the minimum gasdifference
to 1%.
Fixes#795
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Back in 4867ee8ad8 ("Move the Profile out
of the mainwindow.ui") the way to access the PlannerDetails object
changed.
This does the corresponding change to the NO_PRINTING block, making it
build on Android again.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Expand the undo feature by storing a list of renumbered dives' ids
and numbers so that the original numbers can be restored if needed.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is another long operation that needs showing a notification about
importing the old format log files
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Showing an Error message is better called from the Notification Object,
So for consistency old references to showError is replaced by calling
the notification object.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The main error message bar can be used to show exporting information and
other notification.
So a new Notification handler object is created in the main window
<NotificationWidget> that inherits <KMessageWidget> that shows different
type of notifications, ex. (Warning, Error and information)
Also this class contains a QFutureWatcher object that is set to handle
the QFuture variable returned from the exporting thread. this will allow
the UI to be updated when the thread finishes execution.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This addes a menu entry for the user to select a directory that is recursively
traversed to look for image files and compute the hashes of those images (for
those images to be available to be displayed in dives according to their hash values).
This traversal and hash computation happens in and independend thread and so far
the only feedback to the user is that upon completion the dispayed images are updated.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Upon successfull reading an image file, this computes a SHA1 hash of the
image and saves it with the picture tag in the log file. When a file is
not successfully loaded (for example because the log was created on a
different computer) we look up the hash in a dictionary that maps hashes
to local file names.
That dictionary (actually two for both directions), is loaded on startup
and saved upon destruction of the main window.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is somewhat invasive as aborting the XML file read requires us to
report things up the recursive parsing chain.
What we really need to do here is to ask the user how they want to use the
data from reverse geo lookup. But for now we only warn about the fact that
this can take a while.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had a ton of helper functions in qt-gui.cpp which really didn't make
much sense. So I moved them all into qthelper.cpp.
Also moved the UserAgent helper that didn't belong in the UpdateHandler to
begin with - that's a generic helper used in many places...
With this we can successfully build using cmake again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This could cause problems if the user tries to compile with
Qt versions between 5.0 and 5.2.
Reported-by: Michele Fabi <fabiemme@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Null values should be handeled nicely instead of showing NULL or Nan.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't compare to static english string, must translate first.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes prefs.display_unused_tanks also relevant for the planner.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This could cause problems if the user tries to compile with
Qt versions between 5.0 and 5.2.
Reported-by: Michele Fabi <fabiemme@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
version.c is now object code which is recompiled each time
ssrf-version.h changes, while the interface file version.h
remains that same at all times and files which include it
will not need to be recompiled.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The intention had been all along to use the 5.4 QSysInfo API, but due to
a silly mistake in the QT_VERSION check, it never got enabled for 5.4.0.
On 5.4.1 it does get enabled and, unfortunately, causes compilation
errors because the API changed between the time we backported to
Subsurface and the final version.
This commit backports the final QSysInfo API from Qt 5.4 into
Subsurface, which includes the renaming of a few functions. Since the
prettyOsName function no longer exists in the Qt API in that form, I've
reimplemented it using the API that does exist.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes prefs.display_unused_tanks also relevant for the planner.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Null values should be handeled nicely instead of showing NULL or Nan.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't compare to static english string, must translate first.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds the ability to undo shifting of dive times. The change is captured
at simplewidgets.cpp and an undo command is created.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we accept a change on the dive site management screen, it needs to be
reflected on the Dive notes tab right away.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user clicks on manage (or double clicks on the globe) and the
displayed_dive doesn't actually have a dive site associated with it (e.g.
because we are adding a dive or because it was imported or downloaded
without dive site information, then we need to make sure that there is an
empty dive site that we can make changes to.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And hook things up when double clicking the globe.
The user experience isn't consistent with what we do on the main tab
(i.e., no coloring of fields that are changed), but it seems to work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit awkward now. We are downloading what looks like fake dives
in the v2 format. So we create a dive site for every single fix.
After we merge those new dive sites into the existing dives we need to
throw away all the dive sites that weren't used.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems to make sense to only have them on the dive site screen. For the
main UI they were redundant (we have the map) and not all that useful. The
only time people would want them is if they wanted to manually add GPS
coordinates for a dive, but that should now be done via the dive site UI.
There are a couple of FIXMEs in the code and a few code blocks that have
been commented out as they will be needed in one form or another once this
GPS handling is done on the dive site UI, which right now it is NOT.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This simply tracks the names - if we have multiple dives sites with the
same name but different other data (e.g. different GPS), we could easily
get this right (well, somewhat easily, it's a UI question), but for that
we'd have to filter for dive site uuid instead of for dive location name.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the start of the preparations to edit the dive site,
passing a uuid so we can retrieve it later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Name and coords of the current dive are copied to the edit dive site
screen.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make it possible to cancel or accept the location edit and
get back to the mainwindow default state.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Clicking on the 'Manage' button now brings you to the widget to manage it.
Nothing has been added on it yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just the xml file for the Ui location information.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add ability to undo deleted dives by storing a list of the
deleted dives in a QUndoCommand.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the undocommands.cpp / undocommands.h files, which will hold a
collection of classes that will hold undo commands.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add an instance of QUndoStack in the mainwindow, and add undo/redo
actions in the edit menu. The QUndoStack will have a collection
of QUndoCommands to process the undo and redo events.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Reverse all the code using the UndoBuffer class so that we can
use the QUndoStack and QUndoCommand classes. These are Qt's own
inbuild undo framework classes, offering a better undo/redo
process.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If current_dive and displayed_dive still have the same tags then we
shouldn't touch the tags of other selected dives.
Fixes#826
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the filename has extension of .apd, then set the known import
automatically.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding support for importing .apd files (APD Log Viewer). They are CSV
files and already supported in CSV import, but the file extension .apd
is added here.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this text makes sense if this is a CCR dive and the diver does bail
out, the more neutral text "Manual switch to OC" works in all use cases
for this event, e.g. at the beginning of a dive when we manually set this
dive to be OC.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When using that to indicate the dive type at the start of the dive, it's
visually strange to have an event marker.
See #826
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the designer we set the selection type to extendedSelection
but since I removed the widget from the designer, I also had
to set it in the code.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just a button on the UI.
This moves the layouts around, in an attempt to make them less
obtuse.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we have an null widget, we hide the stack.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At least to me it seems more natural to enumerate them row by row instead
of column by column, so now we do
1 2 instead of 1 3
3 4 2 4
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old way of creating the mainwindow made things a bit
dependent of the order of initialization, and we don't
assume that anymore.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The flicker was caused by removing all widgets (and thus setting
the size of the splitter to zero) and then re-adding them.
I've added four QStackedWdigets that have a consistent size and
the only thing I do now is to set the corresponding widget to visible
without removing / readding anything, and thus, not messing with
the sizes.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the last patch in the series of clearing up the
mainwindo.ui. Now to bugfixing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now it uses the states on the mainwindow.cpp and it's finally
starting to be worth the hassle of reworking the UI.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now it's created in the mainwindow.cpp as part of the new
way to configure the interface.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now it's started from mainwindo.cpp and it's part of the
new states
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's now set up from the mainwindow.cpp file.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not used yet. The idea is to call 'setApplicationState("plan");'
and all widgegts for plan will be magically setup because we
added the plan state with registerApplicationState.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
listGlobe and infoProfileSplitters weren't good names as
now we will be able to create more types of widgets there
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the last of the current dialogs to be ported to the
new widgets system. now we need to clean the mainwindow of the
old code.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This new file is the interface for the Details of the planned dive
removed from the mainwindow.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The Plan mode still misses a widget that was done directly inside
the mainwindow. I'll extract it from there and create a proper
class in the next commit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will be used to set the 'default' state. The other
two possible states right now are plan and add; those will
be created right next.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
two #ifdef NO_PRINTING one over the other, merged them together.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This function registers the different widget layouts
that we will have in subsurface. Currently we have three layouts
(default, plan, add) and a few more are comming (for instance
location) and the code is scattered around. It was making me
unconfortable.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The combination of the map / struct will change based on the
state of the application. Currently a lot of different
widgets change what is shown on the main window, and it's very
messy.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If current_dive and displayed_dive still have the same tags then we
shouldn't touch the tags of other selected dives.
Fixes#826
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Before the dive is deleted, a copy is made and passed to the
undo buffer. When edit->undo is clicked, this dive is restored
to the dive list.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add a class to handle all undo/redo events. Whenever a user
action affects a dive, an undo command will be created. A list of
these commands will be stored in the UndoBuffer, to allow for
moving forwards/backwards in the list.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add an edit menu with undo and redo submenus, and connect them to
the UndoBuffer class. The submenus are only enabled when needed.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add an empty UndoBuffer class. This will be built up on to
implement a working undo/redo mechanism.
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the filename has extension of .apd, then set the known import
automatically.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding support for importing .apd files (APD Log Viewer). They are CSV
files and already supported in CSV import, but the file extension .apd
is added here.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this text makes sense if this is a CCR dive and the diver does bail
out, the more neutral text "Manual switch to OC" works in all use cases
for this event, e.g. at the beginning of a dive when we manually set this
dive to be OC.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When using that to indicate the dive type at the start of the dive, it's
visually strange to have an event marker.
See #826
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Allow users to delete dives using the delete key.
[Dirk Hohndel: small whitespace fix; removed an unnecessary
include file]
Signed-off-by: Grace Karanja <gracie.karanja89@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch cleans up code for achieving the above with respect to
CCR dives. The code is simplified and shortened. The display of
gas lables on the profile is made consistent with the cylinder
pressure closest to the graph and the gas composition above/below
the cylinder pressure. The patch significantly improves the
maintainability of this code.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The user may have a different theme, as i did, and it
looked very wrong.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This sets the combobox to disabled if the profile is in
any mode besides PROFILE.
Fixes#824
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can end up having a divepoint that is outside the dive profile. In
this case, we used to crash, but this hack prevents the index out of
range issue.
Fixes#784
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I have no idea how the index ends up outside the range, but at least
this prevents a crash in this case.
See #784
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of inventing another way to do this (and inevitably forgetting a
path where this should be re-enabled) I renamed the DcShortcup related
function and made them enable/disable the copy and paste shortcuts as
well.
Of course there now is one exception (isn't there always?): in "ADD" state
we don't want to be able to switch DCs, but we do want to be able to
paste.
Fixes#825
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Ubuntu, the completer often prevents applying/discarding the changes
on the dive info pane and disrupts editing of other fields as well. This
patch prevents the completer popup from appearing when not in edit mode
(apply or discard is pressed) or when the string is still empty.
Fixes#818
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Why someone would log in but then not allow us to post I don't know... but
it seems useful to at least handle it...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Without this patch, the user effectively cannot change the dive mode as
any change is overwritten by replot copying current_dive over
displayed_dive. The way out is not to call replot but only update the deco
ceiling directly.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit b72c32da7 turned off replotting while the cylinder
combo box was active to speed up editing. After leaving
the combo box, replotting was enabled again and a replot
was called.
This replot is too agressive, as it overwrites the displayed
dive with the current dive and thereby resets the cyinder
change. This eliminates the replot call.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
They stay valid while Subsurface is running, but once you quit, the
credentials are gone.
This way no one can steal them from our settings.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The XSLT based exports can consume long time while applying the xml format.
This time can make the GUI unresponsive. Simply call the export functions
in a new Thread.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit d329420d55 changed the name of the
header from "Max depth" to "Max. depth", so we need to use that in the
code as well. (The dive profile is not drawn if we do not have max
depth.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
probably just a typo; taking the value of a (char *) will return
the first char (or byte).
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should mention the iPhone companion app either alongside the Android
app or at its own line if more precise information is wanted. I suppose
this text change should be enough as we should get more precise
statistics of usage of these apps from the server logs.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Show either the login screen or the disconnect button, plus some text that
explains what the user is expected to do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The maintab view should be consistent; some fields just go to edit mode
whenever they acquire focus and most of them wait till their values are
changed.
Change the dive notes field to be consistent with the other fields and
only enter edit mode if its value is changed.
[Dirk Hohndel: changed to use same_string()]
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We always call reply->deleteLater(), so we where actually calling delete
on a stale pointer, that caused subsurface to crash on shutdown.
Reported-by: Sergey Starosek <sergey-starosek@yandex.ru>
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are reports that the replace calls can cause the application to
crash. This doesn't seem to make sense, looking at the code - this change
shouldn't make any difference. But it makes it even more clear that there
shouldn't be any possible scenario in which we call replace with an index
that's out of range.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the help dialog appears, remove the shortcuts for filter and close from
the main window so that the identical keys for the help window work. This is
not necessary on other platforms, but on Mac it appears to be required.
[Dirk Hohndel: Tomaz had a slightly different approach of removing the actions,
instead I changed this to just modify the shortcuts]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We changed this MeanDepthLine to the MeanDepthCurve (or something),
no need to keep old code around.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This ruler shouldn't appear in ADD or PLAN mode, it's a bug
and may crash things.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This hides the whole QWidget with the share-to-fb button in it. This
lets the Notes field expand to the full width.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As the heading above says.
1) Place user manual option in main menu at the bottom of the Help submenu.
It is more easily seen in that position.
2) Replace two images. I forgot one of the images that had been changed to F20 format.
3) A few small changes, including in the systematic description of the main menu.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit e219bc70f8 ("Refactor dctype -> divemode") introduced a few issues.
For one thing it causes a warning about incorrect use of zorder - I don't see
why this would be needed here, so I simply removed it.
Secondly, it adds a new, automatically named layout element that therefore gets
handled by our "consistent margin" code which creates a messy layout for the
Dive Notes tab. This patch gives that horizontal layout a useful name and adds
it to the list of "zero margin" layouts. Signed-off-by: Dirk Hohndel
<dirk@hohndel.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
the manual uses "Sensor 1:", not sure if it breaks anything.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Last index was not included in the selecting or unselecting the
downloaded dives.
Fixes#819
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The reset call hides the progress bar text, and that way it hides our
error messages we try to show with the progress bar.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Mean depth/s sounds too much like a rate of change but this
referers to instantaneus mean depth at a time.
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this we can easily eliminate duplicates from our user statistics. The
UUID is completely random and there is no way to link it back to a
specific user. By deleting the settings a user can force a new UUID.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In a previous patch, 37830bdb ("Always show deco gas as dive gas") the
semantic of the last variable was changed. This updates other calls to
this function.
This is nothing but documenting changes.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If update checking is allowed we want to do so but we want to be careful,
which messages we show - specifically we don't want to show "your version
is newer" unless it's a manual check.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The unit was stored to the variable after it was used, thus we need to
delay the print of the unit slightly. (In practice the depth unit for
first picture was null before this fix.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
some common nouns, even if the S in OS is capitalized but
that's when it's in acronym form.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This improves the column name matching so our own columns are properly
supported.
See #814
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As changing the export to use tabs, we need to switch the import to do
that as well. However, we also need to support comma separation as older
exports use that.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems that at least in this occasion, the signal blocking requires
the UI element to be given.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The import dialog now displays only a maximum of 10 lines of the CSV
file to be imported.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This assumes that we have either dive details or dive profile, not
combined log files. Before the change in the import UI, user selected
the import type by the tab on import dialog, now we make an educated
guess based on whether sample time field is available.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we have the separator as tab, we need to use the proper tab
character instead of the string for known imports.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
