centerOnDiveSiteUUID() is a helper to center the map on a dive_site
UUID instead of a dive_site pointer.
Make it call centerOnDiveSite().
Make both this function and reloadMapLocations() Q_INVOKABLE
as these are going to be called from QML.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Add the following includes in the header -
<QVariant> and <QGeoCoordinate> otherwise the
mobile build fails.
It is unclear how the desktop build does not complain
about this.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The map widget on the mobile version requires that
a dive object from a model has a dive_site uuid.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Consistently do not use a space between value and unit.
Consistently do not use a space between "name:" and value.
Add "/min" for SAC rate.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
The hash field in the picture-structure was in principle non-operational.
It was set on loading, but never actually changed. The authoritative
hash comes from the filename->hash map.
Therefore, make this explicit by removing the hash field from the
picture structure.
Instead of filling the picture structure on loading, add the
hash directly to the filename->hash map. This is done in the
register_hash() function, which does not overwrite old entries.
I.e. the local hash has priority over the save-file. This
policy might be refined in the future.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Passing of QStrings and QByteArrays was inconsistent in qthelper.cpp.
Unify to passing const-references. Passing by value is no big deal, since
QString and QByteArray do copy-on-write "optimization". Nevertheless, let's
keep it as consistent and effective as possible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
learnHash() was always called in conjunction with add_hash(). The
pattern was that a local filename and a hash were connected in
the hash-to-filename and the filename-to-hash maps. Then, the
original picture-filename or url were registered in the filename-to-hash
map.
This commit changes learnHash() to take three parameters (original-filename,
local-filename and hash) and do all of the above. The new code is
simpler because no dummy picture struct has to be generated in
DiveListView::loadImageFromURL().
The tests were extended to check for all hash<->filename associations.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
learnHash() is called either on a local picture structure
[DiveListView::loadImageFromURL()] or on a cloned picture structure
[ImageDownloader::saveImage()]. In neither case the picture structure
is passed to the frontend. Therefore, storing the new hash in the
picture struct is not necessary.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
hashPicture() calls hashFile(), which calls add_hash(). add_hash()
updates the filename-to-hash and hash-to-filename maps. Therefore,
there is no point in calling learnHash() in hashPicture(), which
updates the filename-to-hash map.
Note that learnHash() updates the picture-struct with the new hash,
but since hashPicture() works on a cloned picture-struct, which
is free()d in hashPicture(), these changes are lost anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
updateHash() and hashPicture() did the same thing, with the exception
that hashPicture() marked the dive list as changed if a hash changed.
This seems like a good idea in any case, therefore always use
hashPicture().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If loading from hash failed in the saveImage() slot(!) it would
recurse into loadFromUrl(), which would generate a new network
reply. Very scary and a (small) wonder that it worked.
Let's try to make this all more explicit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The QNetworkAccessManager is only used in the load() function. No
point in it being a subobject.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
1) Destroying the QNetworkManager seems like a bug: this was a
subobject of ImageDonwloader. It's mysterious how this didn't
crash.
2) Instead of calling deleteLater() on the reply object, simply
delete it after completion.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A cloned picture struct would not be freed if the filename was already
in the queued-for-download set.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This changes the numeric format of many values printed to the UI to
reflect the correct numeric format of the selected locale:
- dot or comma as decimal separator
- comma or dot as thousands separator
In the Qt domain the `L` flag is used case specific mostly
in qthelper.cpp.
Then the helper functions get_xxx_string() are used more consistently.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Replace snprintf() and put_format() by snprintf_loc() and
put_format_loc(), respectively to localize formatting of
integers and floats.
Acked-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace snprintf() and put_format() by snprintf_loc() and
put_format_loc(), respectively to localize formatting of
integers and floats.
Acked-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This commit introduces functions:
- QString asprintf_loc(const char *cformat, ...);
- int snprintf_loc(char *dst, size_t size, const char *cformat, ...);
- put_format_loc(struct membuffer *, const char *fmt, ...);
and their va_arg equivalents, which use Qt's QString::arg() formatting
options to render the strings.
The snprintf_loc() function takes care not to truncate multi-byte
UTF-8 encodings. Thus, on overflow, the resulting string might be
shorter than size-1.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the configure dive computer dialog change the order of the DCs
(all HW first, then Suunto) and correct the names of some HW DCs
(make them the same as in the "download from DC selection list").
Plus added the OSTC Plus to the list of supported DC.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Add a combo box for water types with defaults for fresh water, sea water
and the EN 13319. All values taken from units.h, where EN 13319 was added
beforehand.
Custom values can be entered through a spinbox.
Also changed "Salinity" in TapDiveInformation.ui to "Water type".
Translation required!
Signed-off-by: Oliver Schwaneberg <oliver.schwaneberg@gmail.com>
Add a note in CONTIRBUTING.md that imperative mood
is the preferred way to write commit messages.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Change the strategy when to allow cylinder removal from a dive:
- Not remove when cylinder has gas switch events, in any other cases
allow removal
- Remove this whole "cylinder with same gas" thing being a criteria
for cylinder removal
When removing a cylinder which has corresponding pressure info in
samples, also remove this pressure info from the samples.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Since all qt-helpers are defined in qthelper.cpp, there seems to be
no reason to have two include files. By unifying the two files,
duplication and inconsistencies are removed. The C++-only part is
simply compiled away with #ifdefs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the icd preference setting to the preference group that deals
with gas pressures.
I also reorganised the existing items so that the items within the
pressure widget are logically arranged according to the grid layout.
The order of items was very haphazard. No change of code at all in
this reorganisation.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Each callsite of saveBtDeviceInfo() has a QString, which is converted
to a C-string, passed and immediately converted back. Remove these
conversions by taking a reference to QString directly.
getBtDeviceInfo() is not as clear. Here, the callsite has a C-string
handed down from libdivecomputer. Nevertheless, pass a reference of
QString here as well. Firstly, for reasons of symmetry. Secondly,
to avoid multiple conversions in the getBtDeviceInfo() functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Prepare the building script to suport travis or set other automated
builds, while keeping other options to manual builds.
In before_install script, create needed directories, and dowload
mdbtools sources.
Add smtk2ssrf build script to travisbuild.sh
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Set an "automatic" mode via parameter (or auto detected if running in
travis environment) to skip the user prompt.
Install the built binary, in automated builds, under the usual
INSTALL_ROOT folder.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
1.- Include needed dependencies (glib-2.0 and mdbtools) in .travis.yml
2.- Call smtk2ssrf-build.sh script *after* subsurface is done and
AppImage is built, as the script will override subsurface's binary.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Use struct temperature_t for temperatures in struct stats_t and
use get_temperature_string() when printing these temperatures for
statistics and HTML export.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
