Sadly, there's an explicit change in the sources to of QtConnectivity
that requires this workaround when running the build on a case sensitive
file system.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now in the Ubuntu 14.04 base image for Docker the file
/etc/apt/preferences.d/ubuntu-esm-infra-trusty doesn't exist.
Subsequently, apt-get update enables ESM, but since we don't have a license to
use that upgrades / installs from ESM fail.
This workaround simply ensure that there is such a file pinning ESM to never be
used. With that, the creation of our image should succeed again.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Based on ideas from Anton - both the basic building of containers in the first
place as well as the workaround for the 6h build limit.
Because GitHub Actions are limited to 6 hours we split the creation of the MXE
container into two steps and push the intermediary container after stage 1 to
docker hub. Right now each of the steps takes about 3.5 hours, so hopefully
even with changes in the future this will continue to work.
This commit also introduces use of docker hub instead of GitHub's own registry
(since strangely right now GitHub actions cannot run containers from GitHub's
private registry).
In order for this to work, we need to have the docker credentials in secrets in
GitHub. As a result, only people who can create branches in our repository can
easily test changes to the container images. Others can modify the code to use
a different docker hub account and provide those secrets in their own GitHub
account. Not ideal, but of course we cannot allow every pull request to
potentially overwrite docker images in our "official" docker hub account.
Suggested-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
libssh2 depends on openssl, therefore it is important that openssl is
build before libssh2.
The old get-deps would cause errors in 2 situations:
1) In a clean build, make of libssh2 would fail
2) In a normal build, where openssl changed version, make of libssh2 would
depend on old build.
Signed-off-by: Jan Iversen <jan@casacondor.com>
This feature is in beta right now and might change without notice, but instead
of dealing with the broken Travis Mac builds, this does seem progress.
The build artifact seems to work, but it's a bit more painful to get to. Go to
https://github.com/Subsurface-divelog/subsurface/actions and click on the
corresponding run - it's then in the top right corner under Artifacts. The one
oddity is that after unzipping the file you need to manually make
Contents/MacOS/Subsurface executable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also make sure Grantlee still compiles with Qt 5.13 by cherry picking a commit
that was added after the v5.1.0 release.
In order to identify this commit as comming from the build automation we
temporarily override the user name and email address. As a side effect this
also makes this work on Travis.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QML has ways to style icons - and we use that for the main theme color,
but it doesn't seem to work (anymore?) for the edit and save icons.
Instead of tracking down what changed there, simply switch between icons
with different foreground color, depending on theme.
All the other icons seem to work well in all three themes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit 60e63afb82.
I merged this to early without paying attention to the fact that this
needed an updated build container as well.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Kirigami isn't picking up our font for the Back entry in sub menus.
Also, we still don't get a back button icon on Android. This will
allow us to work around that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This looks extremely fishy to me, but it does seem sufficient to
get the forward and backward buttons to show up in the toolbar.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Whatever I try, the toolbar background is always based on the 'active'
color set in qtquickcontrols2.conf, not on anything that I can set in
QML code. So in an effort to brute-force the issue, this hardcodes the
subsurfaceTheme value in the toolbar UI code of Kirigami.
To make this easier, this (and one of the other hacks) is added to the
existing kirigami.diff.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The hack to remove the action button caused situations where the action
button didn't return. Let's skip that for now. All the other fixes
appear to still be needed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove hidapi from manually built components and use the mxe based one instead.
Remove libzip as that is handled by mxe packages.
Update version of grantlee used to build with qt 5.13.1.
Also hide vscode files from git.
[Dirk Hohndel: combined two commits, cleaned up the commit message and removed
one now incorrect comment line from mxe-based-build.sh]
Signed-off-by: Paul Buxton <paulbuxton.mail@googlemail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When building dbus within the appimage, cmake picks up the installation
path of various files dbus uses through the GNUInstallDirs package,
however this doesn't work under the appimage build.
So we replace the variable with the normal location of this file.
Signed-off-by: Paul Buxton <paubuxton.mail@googlemail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For this we need our own hand crafted trusty container with Qt 5.12,
including QtWebKit and an updated cmake and libdbus, as well as already
build googlemaps plugin, grantlee and libgit2.
At the same time stop uploading the Subsurface AppImage in the
traditional trusty build.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With all upgrading, the build apks now show up in a slightly different
location. Correct this in the scripting. Notice that this is debug
building only. Release building is outside the repo.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Trivial. The final touch command was missing the proper quotes, so it
created a bunch of strangely names files from the date command. Just
good for the developers that like to peek into the docker image.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The main reason for upgrading of the Qt version is the hunt for a broken
BT/BLE stack, preventing downloads from BT/BLE enabled DCs, in relation
to arm64 architecture builds. (And the absolute need for an arm64 build
in relation to the publication of the Android app in Googles Play
store).
In addition, Qt 5.12.4 starts supporting OpenSSL 1.1.1c, and trying to
use our current OpenSSL 1.0 series is highly discouraged by Qt (and
OpenSSL itself).
So, upgrade both in unison. But ... be careful bisecting issues on this
commit, as it does break our build. That will be fixed in the next
commit.
This fixes the BT/BLE download for arm64!
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The .app.zip should once again run on any Mac (ignoring the security issue of
unsigned binaries). The Qt binaries in that archive include the jpeg and png
libraries that were missing in the Qt 5.11.1 binaries we used until now.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
0.9 docker image includes static libraries to build mdbtools so there is
no need for an aditional tarball.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add -a parameter to tee to avoid overwriting build.log when building
static libraries for smtk2ssrf
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Passing an argument on the docker build command line avoids the need to
modify the Dockerfile for each image build.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
mdbtools only builds static under mxe.
This should add static build of glib to the container with the mxe
libraries.
[Dirk Hohndel: merged with latest version of Dockerfile]
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of trying to do it all in one step rely on --squash to do its
job. Don't try to be so aggressive in removing things, it saves very
little space and caused builds to fail.
This results in version 0.9 of the MXE build container
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Printing never worked, none of this was ever included in test builds. Also, now
that there are official releases of QtWebKit again, this just doesn't seem worth
carrying along anymore.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just like Android, Windows binaries are best created in a container.
I still need to push the latest version to docker hub and use it on
Travis, but this way at least the Dockerfile is here.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
... and remove install of the default (old) libgit2 from OS. That old
(0.24.0) libgit2 will be replaced by a newer anyway, so useless to
install.
But the real change to get this Travis build running again is using
the well known openssl instead of libressl.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The install was missing curl.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl> Removed upgrade to newer libgit2.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We currently require a minimal version of libgit2 of 0.24.0. From
issue #1926 it seems that this version is too old. So, a simple test on
Linux to see the behaviour with such an old libgit2, I tried that.
Interestingly, with the current version of openssl that old libgit2
version does not even compile from source (known error in libgit2).
So, bump our minimal version of libgit2 to 0.26.0. That is also the
version we currently use on the Travis and official builds, so well
tested.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
