Allow to both create the full default dive or ownly the descent and bottom
part (so the planner can deal with the ascent).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is working in the wrong way, mostly because I'm setting the
plannermodel to ADD state ( and the planner graphic to the
correct PLAN state ), but I don't know why - when on PLAN state
on the model, things just don't work.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This function should likely to move to C in the future, I'm only
adding this here because I'm changing this file so much ( already
4 rewrites of the function )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The disableDcShortcuts is called inside of the ProfileGraphics
( I actually think that this method should be moved to there )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This correctly enables the planner on the new profile,
but it doesn't triggers the correct paint on the canvas.
[Dirk Hohndel: remove other remnants of the disabled planner as well]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Gas consumption calculation fixed. Pressure difference still needs cylinder size to be set.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt5 got confused about this slot. This does the same as previously but
gets Qt5 happy.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When removing o2 from a gas, eg setting it to "", air, this code would
raise a nice fpe. Fix that by using gas_mod instead.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's a testament to how much I mess around with things that I hadn't
noticed that saving the column width doesn't actually work. Or actually,
saving them worked, loading them back failed as it was done too early and
the setColumnWidth() calls had no effect - and so the next time we quit
subsurface, the default width of 100 was written over all the saved
values.
This seems like an incredible hack but it has the advantage of actually
working. I look forward to someone with better insides into the inner
workings of Qt to properly fix this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We set the column width in the dive list widget when we create that
widget, based on what is in the settings. And we save the current column
width back to the settings when we destroy that widget (so if Subsurface
is shut down correctly and Qt actually gets to run the destructor but not
when someone kills the program).
That means that if we recreate the dive list at any point while Subsurface
is running (and we do that a lot when you manipulate your dive list in any
way shape or form), any changes to the column widths are lost.
DiveListView::reload() explicitly calls setupUi() which reads the column
widths back from the settings - but changes made to the columns aren't
saved to the settings until we destroy the widget...
I see no reason why reload() should call setupUi(), so I'm removing that
call. Let's hope this doesn't break anything else.
Fixes#518
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We use mod calculations on multiple places, so make a separate helper
from it with proper types.
The "clumsiness" of defining a local variable to pass into the function
and out from it comes from the discrepancies in how c and c++ handles
initializations of variables in a struct.
Thanks goes to Tiago and Linus for pointing me in the right direction.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Only a tiny bit of poke around the contextMenuEvent - the events
of the planner are dealt by the QGraphicsItem, and this makes the
logic pretty easy to follow. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk's code in commit a3d300ca91 ("Correctly implement multi dive
selection") had a major flaw - it kept redrawing the selected dives
one after another. Not what we need. So this fixes this up so that it
doesn't take more than a sec to select all the dives that are on the same
part of the click on the globe. I've achieved this by creating a boolean '
dontEmitDiveChanged and sending the signal only if this flag is false.
The reason that we can't simply remove the emit from the selectionChanged
is because the selectionChanged is what we have when we click on the
diveList, if we removed this from there, nothing will happen upon
selection.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code had several issues. It broke the synchronization between
dive->select and Qt selected status and worse, it would partially unselect
previously selected dives when called.
This patch, however, causes the selection via the map to be glacially slow
because it forces a redraw of every single selected profile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Give the export dialog a better name than just dialog.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This also fixes a couple of issues with the existing code:
- removes a memory leak
- treats null and "" the same
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
According to the documentation clearSelection() should emit
selectionChanged() - but I can verify in the debugger that sometimes this
doesn't appear to happen - consequently our notion of what's selected gets
confused.
To work around this, after calling clearSelection() we simply manuall
deselect all dives.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When multiple dives are selected, we need to be smarter about when to show
"add to trip immediately above" or "... below". This code is quite
readable, I think, and does the trick.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: combined two commits into one and cleaned up some
whitespace issues]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First step towards getting the "add to trip" logic in the divelist context
menu to be consistent and correct.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The context menu is getting way too big and confusing. This is now much
more cleanly done from the File->Export dialog.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code removed was already ported to the New Profile.
We managed to clean quite a bit. huhhy
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The new profile code handles the resizing of the profile area in order to
accomodate the depth and time of the dive much more intuitively - the old
manual buttons to do so are no longer needed.
This also removes a few other unused methods.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes mouse dragging work as it should, a tiny
bit different than the old version, but I think it's a better
way. What's missing: Keyboard actions.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code is not ported to the new profile, but from what I
can understand from it, it doesn't need to be. The purpose
of this code was to setup the correct colors and strings
for the current mouse position, we already do this on the
Profile in a different way, on the Notification Area.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QGraphicsView system moves every selected item when the user
clicks and drags one. This patch makes a cache of all selected
items and removes the selection on them. When the user stops dragging
the Notification, the selection is restored.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit makes the planner actually work. There ar still
a few edges, but oh, joy - the new Profile gave a very unexpected
and nice addition to it - Grab the last handler of the initial
dive, and move it to the right, or get any handler, and move it
to the bottom to see what I mean.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a itemChange method, that emits a 'changed'
signal when the handler is moved. I'll use that signal on
the profile to call the correct method.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The UI design looked too tight in my screen.
The explanation texts were a bit inconsistent (and in one case simply
wrong).
The explanation for the initial selection wasn't shown.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When choosing a format from the export dialog a two line description of
the format appears. This is helpful and prevents confusion.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All code that was removed already is working on the New Profile,
The code that's behind #if 0 means that it still needs to be ported and
because of some removal, it was not possible to keep it compiling (mostly
the removal of the Ruler class, that is the Axis, on the new profile).
The rest of the code that's untouched - most probably will keep that way.
The DivePlannerPointsModel is correct and well done, no need to change
that, only the Graphics part.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
But it doesn't move the handlers yet, and when you confirm it you also
must click on the dive to select it or the profile will show garbage.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A signal can connect to another signal, so I removed a slot that had the
sole purpose to call another signal and replaced that with a direct call.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code adds the disconnections of temporaries. A temporary connection
is a connection that should be active only on a certain state, and we need
to clean that for the new state that will enter after.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those two functions are important and necessary for the Planner, they
create and remove the little balls that act as handlers so the profile
can be edited with the mouse.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a signal to MainTab, that should be removed from there
when we finish the rework on the edit part, to go to the edit classes,
but in the meantime, let's keep it there.
The signal is connected to the ProfileWidget in a way that the end of the
edit will also trigger the profile to go back to ProfileState (show the
dive, if there's any) or empty Profile (if there's none).
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is highly broken in many ways - but it's the right first step.
I ported two of the most important methods from the old profile and now if
you are in add dive mode, double clicking on the new profile will
correctly add a handler on the planned dive. To see and move the handler
around, however, you need to activate the old planner.
Next step: add the handlers on the new profile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a temporary measure to help me port the planner to
the new profile. it will be removed when I finish the port,
but it makes the software still usable, so there's no worris.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code checked if dest and source existed before trying to call an
method on them, but dest and source are created on the constructor,
and thus, the if is dummy.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As with any other graphics object, the settings for the ruler
should be managed by the ruler, clearing up the Profile logic
and making the code easier to read.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We used both preferencesChanged and settingsChanged in different
methods and classes to mean the same thing, this adds consistency.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The list of preferences that should trigger a full repaint are at the top
of this method, *if* this introduces a bug it is because some of the
preferences are not being correctly triaged yet and that needs to be
fixed. Regardless of that, now the profile will only enable / disable
the *ruler* instead of replotting everything.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QSettings is a bit bloated on its use, so we are trying to narrow
down the amount of calls to it. We have a preferences struct, use that
instead.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By moving the Hide/Show of the ruler to an internal method, we gain a bit
of codecleanuperism by removing a lot of unnecessary calls to their dest
and source drag-handlers.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The logic of removing the event was in the UI, and this makes
the code harder to test because we need to take into account
also the events that the interface is receiving, instead of
only relying on the algorithm to test.
so, now it lives in dive.h/.c and a unittest is easyer to make.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the ability to close the exporting window, also Quit Subsurface with
this window in front, for consistency.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the ability to export selected dives only in the worldmap
exporter. After Miika added the export dialog in commit 7dc642860d
("Implementing export dialog") and exporting only selected dives became a
choice while exporting.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As our menus are getting many export entries, it is better to create a
single export dialog where user is able to select the export type and
whether to export selected dives or all of them. This should also be
more intuitive than the current way when export from file menu export
all dives and right click menu on divelist exports only selected dives.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code replotted the whole dive, while what we really wanted was to
show the events. so just ->show() them.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The 'Hide Similar Events' function asked the Profile to replot eveything,
only because some events were hidden from the interface. Instead of that
we can simply hide the events since the graph will be the same.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That macro was useless, I should have been drunk when I wrote it, and I
don't drink.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
[Dirk Hohndel: this overlapped with my commit 09e7c61fee ("Consistently
use for_each_dive (and use it correctly)") so I took the
pieces that I had missed]
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit fb82da58a2 ("Globe: assume that we are looking at the
current_dive") changed the prototype for
GlobeGPS::prepareForGetDiveCoordinates. This patches the dummy in
NO_MARBLE.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commit 2bc76beb65 ("Globe: we always center on the current dive") changed
GlobeGPS::centerOn to GlobeGPS::centerOnCurrentDive. This patches the
dummy in NO_MARBLE, too.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No attempt is made to ensure that what the user does is sane. So this can
result in duplicate numbers, non-consecutive numbers, non-monotonous
numbers, whatever floats the users boat.
You can renumber a single dive or all selected dives (with a starting
number given that is applied to the oldest selected dive and then for each
newer selected dive that number is incremented by one).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a dive has multiple dive computers we enable a special context menu
when the user right-clicks on the dive computer name AND is not already
showing the first dive computer. In that case we offer to make the
currently shown dive computer the first one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For most users this is no change at all. For the few who download from
multiple dive computers this now shows them which of them is the primary
dive computer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This uses the new helper function from commit fc4f133f19d0 ("Add new
helper function that looks up the index of a dive by its uniq ID") to make
the logic implemented in commit 122593a63a46 ("Fix selection after
downloading dives from the dive computer") much saner to read.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we successfully download dives, the old selection should be cleared and
the one of the newly downloaded dives should be selected. I decided to
pick the last dive downloaded, which for most dive computers (but for
example not for the Uemis SDA) will be the first or earliest of the dives.
That seems much more intuitive than keeping the previous selection around.
Of course this is harder than it should be because of the way we track
selections and because we need a consistent dive list model in order to
change the selection.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The original name was a really bad choice as we have a 'diveid' as part of
struct divecomputer - and that is not the diveid that is being used here.
Instead we use the 'id' member of struct dive which holds the "unique ID"
for this dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code was completely bogus - it's confused about what the variable
'i' is counting.
This also let's us select the Uemis mount point by default if that's the
only valid "device" that we found.
Compile tested on Windows, untested on Mac.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user selects a Uemis divecomputer, don't show serial devices.
If the user selects a serial divecomputer, don't show the Uemis
filesystem.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the last key that went in ended a tag and the next key is a tab -
deliver that to the TabWidget instead so we can navigate between input
fields.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This may sound counterintuitive but it actually makes sense.
If you have a default filename that's the name of you "normal working
file". If you want "Save as" something, that by definition is NOT your
normal working file but a subset or an experiment or something. And you
most definitely do NOT want to overwrite your default file with that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
C specs says that we can safelly free a NULL pointer, so there's no reason
to check if it's null before freeing it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit renames getDiveById to get_dive_by_id, and it also removes the
Q_ASSERTS and if(!dive) return that the callers of this function were
calling. If it has a Q_ASSERT this means that the dive must exist,
so checking for nullness was bogus too. I've changed the assert (done
in a silly C-Way.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The DiveList classes were a partial mess (and some of it is still in a
messy state). The classes that deal with it where done in 'qtHelpers.h',
the extern global variable in dive.h, a few methods here and there. This
concentrates most - but not all - functions in their own file. The reason
for that is to make the new developer faster when looking for things: if
it's a divecomputer related method, it should be in a single file, not
scattered around.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Last time I touched this I got a scream from dirk, but then I
looked at the code again and the problem that I faced was that
I broke translations in a sad way, well, now I broke it again.
However, this method shouldn't belong to MainTab ( because of
that thingy that I said before and also many others: Separate
the logic of your application from the UI specific code )
This generates a string that's going to be used on the Interface,
it doesn't display it on the interface. Move it down below makes
it easier to test ( I don't need to create an Widget and worry
about the parent-relationship with the mainwindow just to test
this function, for instance. )
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QStrings shouldn't be == "" to check for empty string, use .isEmpty()
QStrings shouldn't be != "" to check for non empty, use .size()
std::string shouldn't be cleared with = "", use .clear()
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way, the user can save dives containing sets of "standard cylinders". Selecting one of those prepopulates the gas list for the planner.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
4243fcb915 ("Dont set coordinates when two or more dives are selected")
Changed how the prototypes in GlobeGPS looks. This aligns NO_MARBLE
version of GlobeGPS with that.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Upon pressing Ctrl-Q or the window close button a modal dialog was shown
to remind the user that the planned dive is not saved. This patch
triggers the "cancel plan" action before trying to quit.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For deco stops show the gas of the next segment in the table. In
recalculation remove old deco stops earlier.
In struct diveplan, the items are "segments" with a beginning, a duration,
and a gas. In contrast, the UI of the planner uses "waypoints" which are
the boundaries between segments. It is conventional at least for deco
stops to display the gas of the _next_ segment in the runtime table (i.e.
the gas possibly to be switched to).
Furthermore, in addStop, the old deco stops have to be removed earlier as
otherwise a new waypoint later than a previous generated gas switch
inherits the gas of the old switch.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Same problem as the previous commit: toStdString() returns a temporary,
and c_str() will return a pointer to internal data, freed at the end of
the statement. So get the pointer to be strcpy'ed in the same statement.
Changed to toUtf8() to be more explicit about the encoding and to avoid
std::string
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QList::first() returns a reference to an item, but that list was a
temporary. The list gets destroyed at the end of the statement (the
semi-colon), so we ended up keeping a reference to freed data (i.e., a
dangling pointer)
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This re-adds this code that got removed in a209dfbfd5 ("Multi dive
edit: don't change location texts until user saves the change")
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Otherwise the code loading a dive into the field would mark it as
changed.
This re-adds this code that got removed in a209dfbfd5 ("Multi dive
edit: don't change location texts until user saves the change")
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This still gets it wrong (i.e. marks things as edited when they are not or
not edited when they are) but at least they are no longer incorrectly
marked as incorrectly parsed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I cannot figure out how to get the hemisphere letters translated correctly
in qthelper.cpp. Short term hack for now - someone who understands how
this is supposed to work really needs to take a look.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As in commit 3870bdafee53 ("Globe: we always center on the current dive")
passing in a specific dive here makes no sense - it's always about the
current dive.
Fixes#513
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simplify the API (we'll take advantage of this in the next commit).
We always center the globe on the current dive, so no point in passing
that dive in.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we keep updating the location text of all selected dives we can lose
the status of which dives had the same text of the original dive and which
did not (this happens if the location we are adding is identical to a
selected location but adds text to the end of it).
Now we only edit the other dives after we accepted the change.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I don't understand why we wouldn't set the percentage if we displayed text
there as well. This looks much better.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is based on Linus' idea on the mailing list.
Treat NULL strings and empty strings as identical.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This time for values that aren't simply text.
For normal integers this is rather straight forward. For the 'when'
timestamp we simply assume that this is a shift in time.
What is still missing is consistent handling of the three fields that are
implemented as tags: tags, buddy and divemaster. We have special code for
tags that makes no sense in a multi-edit scenario. And we treat divemaster
and buddy as a single string - which kinda works but treats "Bill, Joe"
and "Joe, Bill" as different.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was broken when porting to Qt - we used to do this correctly in the
Gtk version.
When editing multiple dives we show the current dive to the user and allow
them to edit that and then apply those edits to all selected dives. The
way this is SUPPOSED to work is that we only change those selected dives
that had the same value for the edited field as the current_dive had for
that field.
Let's say you select ten dives. The current dive shows divemaster Joe. You
change that to divemaster Jim. Then only the selected dives that had
divemaster Joe should change to Jim. All other dives should stay
unchanged.
This seems to implement that logic.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The way this is implemented is broken in several ways.
This fixes the first issue.
For the invocations where we are in the 'WHAT' checking to see if the
value we are changing in the selected dive was previously the same as in
the current dive (which is the one shown to the user for editing), then we
need to make sure we change the current dive last, otherwise the
comparison will fail.
Of course, right now we only do this check for gps location, which is a
massive bug as far as I am concerned.
Fixes#515
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I we are showing a calculated ceiling, then we have to replot the profile
after a preferences change as the gradient factors could have changed
which might change a calculated ceiling.
Also use the rulergraph preference instead of checking the settings
directly.
Fixes#511
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QVariant does the right thing, regardless of whether the value is stored
as int or as string - so let's just use that instead of manually checking
for integers (and failing if the values are stored as "true" and "false").
Fixes#511
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit bcdd6192fe ("Show translated event names in tooltip") I was
too aggressive in replacing the checking for event names with checking for
event types. It turns out that we are abusing an existing event type in
the planner (and use a different event name to mark the difference). By
just checking for the type this now caused incorrect information to be
displayed in the info box (a simply "PO2 warning" on a Suunto D9 could
turn into a "Bailing out to OC" notice).
The correct fix is to get our own range of SAMPLE_EVENT_xxx numbers from
libdivecomputer. Once we have those, we can do this the right way. For now
we just fall back to also checking the event name (which is what I wanted
to get away from so translated names don't trip us up).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 7f3b487c77 ("Restore the previous globe zoom level after
showing dive without GPS") I was a bit too aggressive in replacing a
deprecated API function - people still need to be able to compile against
Marble versions older than 4.10.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user changes the coordinates for a dive but then cancels the dive
edit, the globe would stay at the location that was temporarily set and
not rotate back to the still active coordinates.
This fixes it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Apparently this only happens on Windows, but there we would change the
dive coordinates on a SINGLE click when editing a dive. With this change
we simply bail if the event isn't a double click.
Fixes#505
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a trip is selected (or for other reasons more than one dive), this
would change the GPS coordinates of the whole selection which almost
certainly isn't what the user wanted.
Instead, only allow changes of the coordinates on the globe if exactly one
dive is selected.
[Dirk Hohndel: massively rewritten and extended - but I didn't want to
simply "steal" the commit from Tomaz...
This now maintains the "zoom out mode" for dives without
GPS coordinates and deals with edits of multiple dives that
are initiated the "normal way" by starting to edit other
data as well.]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Thanks to commit 83c5ab5871 ("Zoom out when dive has no coords.") we
show more of the globe when displaying dives without GPS data - but that
caused us to forget the zoom level we used before and so the experience
when switching back to a dive with GPS data was disappointing.
This makes sure we track the last valid zoom level and restore it when
needed.
I also replaced the deprecated zoomView() calls with setZoom() calls.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Mouse activity on the globe should not select dives when one or more dives
are being edited. This improves the detection of that state.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the globe zoom out to show it complete when
the dive has no coordinates.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "is_air()" test works when we have the gases in permille, but not in
percent. In that case we can just check for He == 0 and O2 == 21.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In order for this to work we need to compare against the event type
instead of the event name - which makes much more sense to do, anyway.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The behavior at startup is actually very annoying: we select the latest
dive, and expand the trip it is in, but since we use "scrollTo()" on
just the dive, and it's not initially visible, the startup will make the
first dive be at the top of the list view.
Which means that the actual _trip_ detail is not visible at all, since
it will have been scrolled off the list view entirely.
Fix this by first scrolling to the trip, and only then scrolling to the
actual dive (using the default "EnsureVisible" policy). Obviously, if
it's a trip with lots of dives, scrolling to the dive may end up
scrolling away from the trip header again, but at least that never
happens at startup, and at that point you have to scroll away from the
trip just to show the dive.
Do this same dance when changing the dive selection (mainly noticeable
when picking dives on the globe view).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having all the grid lines in the same color made things visually
confusing. To clean this up a little make the heartrate lines a light gray
color.
Fixes#484
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing the location string we try to be smart and automatically add
the correct coordinates (assuming we have a location of this name already
in the dive list). So if you return to the same dive spot you'll get the
correct coordinates by default. But this creates bogus result if we allow
an empty location to be matched, as it makes no sense to assume that all
dives without a location name were at the same coordinates.
Fixes#498
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
DateTimeOriginal should be used as first option when loading images.
When images are modified, the original time should be retained, but the
DateTime will change to the edit time.
See #495
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds option to export selected dives into a CSV file to the right
click menu on dive list.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds an item to File menu to export all dives in CSV format.
Naturally this includes also the code to perform the export.
Fixes#434
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When exporting UDDF logs the file name selection dialog should talk
about export, not save. This patch changes that text
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fixing the Hotkeys inconsistencies in subsurface, All the popups should
react to 'esc' and 'ctrl-w'/'cmd-w' as 'cancel'. also 'ctrl-q'/'cmd-q'
should quit subsurface.
Fixes#489
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding the ability to close the shift times window, also Quit subsurface
with this window in front.
See #489
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds the ability to close the about window with the ctrl + w
shortcut.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add ability to quit Subsurface with a Ctrl-Q shortcut even if the yearly
statistics window is active.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This enables closing the yearly statistics window with esc or ctrl+w
keys.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add ability to close the user manual window with a Ctrl-W shortcut.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds more handling of missing actions for the mouse on
the equipment edition. It complements the stuff talked about
on bug 359, but it's a different issue. 359 seems already fixed.
See #359
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a download is canceled, discard the partially downloaded dives.
Fixes#341
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using the auto-completer while the tags widget is 'empty', always picked
the first choice.
Write some letters and remove them in an empty tags widget, the complete
list of tags will appear - now if you try to choose any tag with the
keyboard arrows it will choose the first one. also if you tried choosing
it by mouse it will be inserted twice.
This is fixed by removing the unneeded else part.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a manually added dive is saved we cancel the plan. In that process
we throw away the cylinders which triggers a redraw of the profile. Which
tries to access the diveplan and its data points that have already been
freed. BOOM.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When changing the values of air/water temp after the first time and save,
it will be reset the intial value.
This is fixed by removing the "select_dc" (which makes the change to the
dive struct instead).
Fixes#457
Signed-off-by: Yousef Hamza <jo.adama.93@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a preferences setting, it should belong to the preferences
structure.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This marks a lot of todo's where I think there's core stuff being mangled
on the interface - we should remove this from the interface to make
testing and maintenability easier.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rewrite of the actual planner logic. Now ascend to the next potential stop
depth. There the state is cached and we try to ascend to the next stop
depth. If we hit the ceiling while doing that we go back to the cached
state and wait there for a minute. Then we try again. Then loop.
Converted all depth related variables from unsigned int to int. During
planning, in a time step the current depth can temporarily be negative and
comparisons of a negative int with an unsigned it have not the result I
expected ( (int) -2 < (unsigned int) 3 turns out to be false). And we
don’t really need the 32nd bit that unsigned buys us for depths.
Deco stops are now shown in the same table as manually entered stops in
boldface (I removed the second table to save screen estate).
The gas shown in the table is still misleading as it means the gas used on
the segment leading up to that event.
The update of the profile only works partially upon changes in the list of
available gases.
Treatment of various gases is basically there but needs some more love.
The ascent velocity is now provided by a function that takes the current
depth as argument. Currently it always returns 10m/min but that will later
be variable (and hopefully user configurable).
The profile is not redrawn while deco is computed (avoiding an infinite
recursion).
The table got a new column for the duration of a segment while the old
“duration” column was renamed “Runtime” to reflect what it actually shows.
Currently, only the run time but not the duration are editable.
All deco gases are used from the depth where their pO2 is 1.4bar. This
should become more flexible.
Calculation of the pressure drop in cylinders without configured volumes
is suppressed. This solves a problem with the planner crashing when saving
a dive where not all cylinders had been manually given a volume.
[Short rant break: Treating 0/0 as air bites back at so many places. E.g.
Cylinder data is initialized with memsetting the whole structures to 0.
Then later suddenly this totally unconfigured cylinder is being treated as
it would contain air. Maybe at some point this was a feature. But it lead
to a naughty bug which took me over an hour to resolve. We should
seriously reconsider this choice and better move to 209/0 being air if
changing this everywhere is not too much trouble]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
-Renaming prefs members for consistency.
-Changing references of QSettings to the prefs structure instead.
-Removing unused functions in pref.h were left over from an old version.
-Changing the data-type of bool members to short for consistency with other members.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- move buttons to the bottom of the window
- use QDialogButtonBox that allows to follow platform-dependent button layout
- enlarge window size to not to crop content
- change "Close" button action from "accept" to "reject"
Signed-off-by: Andrey Zhdanov <andrjufka@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move the heart rate graph icon up in the toolbox with the cluster of
buttons that control graphs
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existing code for toggling the DC reported ceiling in red or "surface
color" clearly had never been tested.
This seems to create a reasonably attractive implementation - not exactly
what we had in the past, but good enough.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The userid of Subsurface Webservice can be included in locally saved xml
files and git repository.
For xml files, it is stored in userid tag. For git repo, it is stored
in 00-Subsurface file present in the repo.
Preference dialog and webservice dialog modified to include option
for saving userid locally.
In case of difference in default userid and userid in local file,
some semantics are followed. These can be referred to here:
http://lists.hohndel.org/pipermail/subsurface/2014-April/011422.htmlFixes#473
Signed-off-by: Venkatesh Shukla <venkatesh.shukla.eee11@iitbhu.ac.in>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As a warining for the user mark the field red.
If the user inputs invalid input that will be ignored
while parsing.
But with adding a one character error margin to prevent it from toggling
between Red and Yellow while editing existing values, for example "After
Deleting unit and last number after '.'"
Signed-off-by: Yousef Hamza <jo.adam.93@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The include path is set up correctly so we don't need these explicit paths
in includes.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After adding the animation member in the preference struct, it is
very resonable to change these references of QSettings to the
preference structure instead.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adds new push button "HR" to the button bar on the dive profile to
toggle display of heart rate.
TODO: New icon for the heart rate button is needed.
Fixes#485
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The lettering of the heart rate numbers on the lefthand exis "fall off"
the left hand of the profile panel when the panel is a bit narrow. This
minute change moves the letters a bit closer to the Y-axis so that their
left-hand extreme is more or less in line with those of the depth-labels
on the Y-axis. This is a partial response to Ticket # 484.
See #484
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When doing some changes in the preference window and clicking "Apply", the
'Close without saving' button is supposed to restore the previous values.
However some fields were not restored correctly.
- The Animations Slider was never restored to its initial value.
(A new member in the pref struct was added - pref.animation)
- The 'Font' and 'Font size' were restored correctly to the previous
values but their effects weren't restored to the UI and that required to
open the prefrences window again and press ok.
Fixes#481
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The present text for configuring the display of unused cylinders simply reads:
"unused cylinders". This is now changed to "Show non-used cylinders in
Equipment Tab". The latter wording is much clearer to the average user.
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The removal of the planner menu entry was erroneously commented out.
Other parts of the code rely on ENABLE_PLANNER to know if the planner is
enabled or not so rely on it here to.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The order of arguments to fread was incorrect.
In case of arguments "streamsize, 1" the returning value is 1, and
hence due to membuf[streamsize] = 0; line, membuf ends up being one
character long.
Fixed it by exchanging arguments to "1, streamsize". This way,
streamsize has the correct value.
Fixes#483
Signed-off-by: Venkatesh Shukla <venkatesh.shukla.eee11@iitbhu.ac.in>
Acked-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently the feature to show temperature units while adding dive is
provided through checkbox in preferences->units section. This patch
disables this checkbox and always enables this feature.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add the option to edit the name of a bookmark to be more meaningful for
the user they prefer.
It works just as simple bookmarks and can be removed and hidden.
It won't accept names longer than 22 characters because longer names will
display as garbage text.
Also changed the code from displaying flag depending on event name to
depending on event type.
Signed-off-by: Yousef Hamza <jo.adama.93@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's a tricky problem as we need to remember this across a divelist sort
(as the user might have edited the date / time). The old code made not one
but two incorrect assumptions.
a) it assumed that the added or edited (but previously manually added)
dive was the last one in the dive list (clearly wrong when adding a dive
that has an earlier date)
b) it ignored the fact that refreshDisplay() would select the top dive in
the list if no dive was selected
This patch addresses both of them and makes the code easier to understand.
Fixes#480
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adding Shortcut (Ctrl+H) to the worldmap exporter for consistency with
the other commands in the file menu
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of unconditionally creating the object at program start let's
create it the first time we need it. That should avoid adding more and
more delays at program start (not to mention the usually unnecessary
memory use).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know the plan is to do much better OS detection - but at least Linux in
general should be called out and not be treated as "unknown".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a check for updates feature.
It connects to http://subsurface.hohndel.org/updatecheck.html to check for
any new versions. It then prompts the user with a download link if an
update is available.
Signed-off-by: Joseph W. Joshua <joejoshw@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The +10 pixels fix was introduced to fix some layout issue on Mac ways
back, but it breaks things on Android. This makes sure this only gets
applied when build for mac.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Model derived from tableview is expected to have remove slot,
which is missing in DivePlannerDisplay currently. This patch fixes
the annoying warning message while starting Subsurface because of
not including remove slot.
Currently there is lot of work to do, that either requires modifying
the model to skip 'remove' slot or find a way to make them inactive.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently user can edit content in compute waypoints table
(in PLAN mode), ofcourse this does not trigger any calculations in
the code, but user cannot see the content he needs to see after edit.
This patch makes the content uneditable.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The terms tank and cylinder are used interchangably both in
diving and in the code, but in the UI we should be consistant in
what we display to the user.
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Recently Robert Helling provided a patch "Distinguish between entered and
calculated waypoints" in an attempt to distinguish between entered and
calculated stops.
This patch is an independent (content wise) extension of the above
patch and is built relative to it which adds new table to display
computed waypoints in plan mode.
Currently table includes only two columns "Comp. Depth" and "Comp.
Duration", which can extended to show further information.
This is only a start to the UI interaction in PLAN mode.
In addition to this there are many TODO things that diveplan feature
demands
TODO:
1. Show more details through "Computed Waypoints" table.
2. Remove tooltip from "Computed Waypoints" table widget.
3. Make contents in "Computed Waypoints" table widget non-editable.
4. Fix error when trying to save dive plan without using cylinder data.
5. Make dive plan editable after saving it.
6. Improvise dive planner graphics window.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the world map exporter.
- add worldmap-save.c that writes the html to the file
- use Google maps v3 API to put the place marks on the map
- add worldmap-options.h to contain some settings for the JS which will
make it easier for those to be changed
- add save HTML action in the mainwindow user interface
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add additional check box in "preferences->graph" section that allows
users to hide average depth on dive profile.
By default this option is checked to show average depth.
Fixes#475
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove redundant spaces from dive master and buddy list fields.
Ticket also mentions about similar space behaviour in tag field, which I
couldn't reproduce.
Fixes#476
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some weird things happen if we use a local instance of the
ProfileWidget2 class in printProfileDives(). Once we
exit the printing dialog the profile crashes, which could
hint of singleton issues.
Instead we are going to use the already active instance of
the class which we can retrieve from MainWindow. This should
also be faster because the class is pretty heavy.
In such a case the cleanup at the end of printProfileDives()
is still relevant (removed in ac9a23ef3b). First we
resize the widget for printing purposes and then resize it
back to the original values and re-plot the current selected
dive in the dive list.
Fixes#477, #478
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
getColor() has a default argument for grayscale set to false.
With this patch we pass it the local isGrayscale flag, which
can only be set during printing.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some flags like printMode and isGrayscale are missing yet needed.
The flag printMode is required so that we know *when* to hide
certain elements such as the ruler and tool tip (e.g. not needed
while printing).
isGrayscale should be passed to all getColor() calls, so that
the greyscale color table is respected.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The ruler text's white background scales badly. This patch
adds the ItemIgnoresTransformations for the textItemBack
object and matches the dimensions and position of the
textItem object in front of it.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Our usermanual is based on webkit, and thats not supported in Qt for
Android. We should probably replace it with a Android native webview
somehow.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some users have requested a way to build subsurface without marble.
This hides all traces in the ui and creates a GlobeGPS-dummy thats
just a QLabel saying that marble is disabled, in case its shown
somehow. The dummy is there so we can just ignore the fact that marble
is disabled in the rest of the code.
Fixes#394
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not including stdint leaves 'int64_t when' without a type and undefined when
compiling for Windows with mingw
Signed-off-by: Alberto Corona <albcoron@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Manipulating cylinders, especially changing the exact gas content (o2,
he), changes the pp02, ppHe graphs. This patch simply replots the profile
in case of cylinder change at time of saving.
Signed-off-by: Jan Mulder <jlmulder@planet.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In bf205726 DEPTH/Switch at was disabled by commenting out that code.
This puts it back behind ifdefs
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The added characters by auto-completion "for the last item"
isn't saved when using Return to save it "works well with
tab"
Fixes#469
Signed-off-by: Yousef Hamza <jo.adama.93@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We didn't care about system default fonts and sizes, we just used the Qt
default font.
Due to how QFont is constructed, there was need to split font and font
size.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Changeset a90818671 introduces a small inconvenience. The pp graphs at
startup are not shown according to the visibility settings. Requiring to
toggle the icons to show the desired pp graph.
Trivial fix.
Signed-off-by: Jan Mulder <jlmulder@planet.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the current dive time and the adjusted time to the time
shift window. I added a function to dive.c to get the timestamp of the
first selected dive.
This will view the time of the first selected dive only even when multi
dives are selected but it does change the times for multiple dives
properly.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The handling of keyboard is broken on Qt inside QComboBoxes.
I'm trying ( and losing ) to make it less broken. This patch makes the
code work reasonably well if you press Key_down or Key_up after having
displayed the filter popup, which is different from the combobox popup for
some reason.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should make the layout work better on smaller screens.
Fixes#458
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The only place on the code that the y() position didn't accompanied the
dive-depth was this one, so let's see if this patch fixes it.
See #455
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we create, then set the value of a variable, we are wasting cycles
and making the code more verbose.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Let's not be evil by creating "" as empty strings inside of the code,
really.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch removed the use of copy-constructors on the QString to use the
const-references. Even knowing that the QString is a refcounted class,
let's not get that bad habit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The offending code is line-by-line equal to the completion highlited
method, so why make it duplicated? Call that method instead.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When I'm on a dive trip i usually download dives multiple times to start
logging them while i still remember them. When i have already created a
trip and downloads new dives they needs to be able to be added to the
already existing trip, without relying on autogroup.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the git object save logic also check out the changes in the
working tree and index if the branch we save to is checked out. It used
to be that we would just update the object store (and the branch ref, of
course), but leave any checked-out state untouched.
Note that if the working directory is dirty (ie you have made changes by
hand and not committed them), the checkout will skip any dirty files and
report it as a warning to the user. However, the save still succeeds
(since the _real_ save goes to the backing store).
NOTE NOTE NOTE! Both loading and saving very fundamentally work on the
git object store level, and if you are working with a checked-out branch
and make modifications to the working tree, saving will not touch those
dirty files (so that you can try to recover your edits manually in the
working tree), but it's worth pointing out that subsufrace loading state
will totally ignore the working tree.
So the only way to make subsurface *see* your changes is to commit them.
Having edited state checked out in the working tree will only confuse
you when subsurface first ignores it on reading, and then refuses to
touch the checked-out state on writing.
Put another way: working with a checked-out branch is now _possible_,
but you need to be aware of the limitations.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt5 uses different widths for some of the poly. lines
in the profile. Setting an explicit value fixes that.
Tested-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When using Up/Down arrows to scroll the tag list it always selected the
first item in the list and doesn't scroll.
Fixes#468
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After editing values in cylinders or weights hitting save will not save
the changes to save the edit one must move the focus to a different
field first this is fixed by losing the focus before saving the changes
Fixes#412
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
display.h: dc_number is unsigned int, thus a couple of warnings
may pop-out.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After the dive log has been closed, the ProfileWidget2 does not clear
the pn2 po2 and ph2 gas line.
This patch cleared the three lines after dive log closed.
Acked-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Hugle <wulong@comp.nus.edu.sg>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are no utf8 in those strings, and we can translate them as
everything else with tr() instead.
QApplication::UnicodeUTF8-part is deprecated and removed in Qt5.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The selection logic was a bit random: some places would return NULL if
the dive computer index was out of range, others would return the
primary dive computer, and actually moving between dive computers would
just blindly increment and decrement the number.
This always selects the primary computer if the index is out of bounds,
and makes sure we stay in bound when switching beteen dive computers
(but switching between dives can then turn an in-bound number into an
out-of-bounds one)
Fixes#464
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I had intended to amend the previous commit with this before pushing it
out. This changes the comment that pointed out the bug that the previous
commit fixed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out we unconditionally set all events as visible when redrawing the
dive - even with a comment that this should take into account if the event
is visible. Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This got lost when we switched to the new profile.
Remove event works. Hide events does call hide() on the DiveEventItem but
for some reason it stays visible. I'll hope for one of the more
experienced Qt people to fix that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user tries to delete a cylinder that is in use and that action is
rejected, the cylinder widget (and the whole dive) should not be put into
edit mode. After all, nothing changed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We always checked if the tank was in use by the planner / dive editor -
even if we were not in dive edit mode.
With this patch, when not in dive edit mode, we check our cylinder "used"
flag instead.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Especially in O2 decompression parts of a dive, the pp02 is typically very
close to the threshold value (normally 1.60 bar). The old implementation
of the pp profile graphs assumes that there is exacty 1 consecutive set of
samples that needs to be in the "warning color". This results in an
erroneous display of the mentioned graphs, connecting multiple episodes of
too high pp with bogus lines in between.
This fix generalizes the pp graph logic to allow for multiple segments of
high pp, each to been drawn seperately in the "warning color".
Signed-off-by: Jan Mulder <jlmulder@planet.nl>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "report_error()" interface is a lot simpler, although some of the
C++ code uses QStrings which make them a bit annoying, especially for
the varargs model. Still, even with the explicit conversion to UTF8 and
"char *", the report_error() model is much nicer.
This also just makes refreshDisplay() do the error reporting in the UI
automatically, so a number of error paths don't even have to worry. And
the multi-line model of error reporting means that it all automatically
does the right thing, and reports errors for each file rather than just
for the last file that failed to open.
So this removes closer to a hundred lines of cruft, while being a
simpler interface and doing better error reporting.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the error string just be an internal "membuffer", which the
GUI can fetch and show when errors occur. The error string keeps
accumulating until somebody retrieves it with "get_error_string()".
This should make any write errors actually show up to the user.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This at least avoids marking the dive list as unchanged on a failed
write, and propagates the error further up the stack.
We still don't show the error string in the GUI, though. I'll start
doing that next, I think.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes subsurface remember the git source commit of the dive data.
If you save to an existing branch, subsurface will now complain and
refuse to save if you try to save if the existing branch is not related
to the original source. That would destroy the history of the dive
data, which in turn would make it impossible to do sane merging of the
data.
If you save to a new branch, it will see if the previous parent commit
is known in the repository you are saving to, and will save parenthood
information if so. Otherwise it will save it as a new parentless commit
("root commit" in git parlance).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By simply storing the coordinates based on the scene (instead of trying to
map them to real coordinates) the overlay position is correctly restored.
Also remove the redundant positioning before readPos is called.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a bit tricky because we are using a plain widget for
a window and don't have a class for it (req. more source files).
Also for the table model to update we need to create a new
YearlyStatisticsModel instance each time. At least, in that regard
we can re-create the model each time refreshDisplay() is called.
This patch adds a couple of private variables that are used
to manage the memory of the yearly statistics model and window
and also close that same window on MainWindow::closeEvent().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The topmost Z order of items in the profile should be:
- background (poster / logo)
- toolTipItem
- rulerItem
...
This mostly fixes the ruler being under other elements.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A couple of problems with the ruler:
- the rotated text doesn't look very well at all and interpolation doesn't
help it much
- measuring towards the right most part of the profile makes the text go
out of the screen
To solve these issues and attempt to improve the ruler this patch does the
following:
- place the text at the bottom of the lowest of the start and end points.
this way the line will never intersect with the text
- clamp the x position, so that the text doesn't ever leave the screen
horizontally
- place a white background behind the text so that it will cover text and
graphics under the ruler item
(TODO: place the ruler on top of everything else)
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For most dialogs it would be much safer to make them Qt::WindowModal to
the parent (MainWindow).
For now we are not doing this for the preferences dialog as there are
situations where the user might want to be able to move it around and even
interact with the main window.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The animation appeared when the user started subsurface with a default
file, wich was a little annoying since it didn't had a 'from' position
to go and it was also increasing it's size on some window managers
that do subtle windows animations when a program starts. This patch
treats the first dive opened when the program loads with a divelog pa
rameter differently as the following ones storing the velocity value
on a temporary, and reassigning it later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
User can now fine-tune the animation speed on the preferences,
a value of zero disables it completely.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is very userfull for a ( yet to be implemented )
preference dialog about the animation speed, so the
user can enable / disable the animations or make it a bit
faster for it's taste.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Once the poster is displayed when there are no dives in the list,
we may also want to disable the QToolButtons (PO2, SAC, etc..),
until a new dive is loaded and the profile is redrawn.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is useful if we have more non-modal windows and we want
them simply to close with the main one without explicitly
creating class member variables to point to such instances.
A practical example would be the debug window created in
ProfileWidget2() (diveDepthTableView) which holds
the depth profile values.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently when user wants to add a new dive information,
the ways to know what unit system is being used are
- Through preferences panel.
- Save the dive information, which displays units in
the text field.
This patch provides an option to the user to show current
unit system by displaying the unit on the side of the label
when the user is editing the fields.
This feature can be enabled or disabled by using the new
checkbox option i.e. `Show units in text labels` included
in `preferences->units` section.
Signed-off-by: Lakshman Anumolu <acrlakshman@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So this is totally unrelated to the git repository format, except for
the fact that I noticed it while writing the git saving code.
The subsurface divetag list handling is being stupid, and has a
initial dummy entry at the head of the list for no good reason.
I say "no good reason", because there *is* a reason for it: it allows
code to avoid the special case of empty list and adding entries to
before the first entry etc etc. But that reason is a really *bad*
reason, because it's valid only because people don't understand basic
list manipulation and pointers to pointers.
So get rid of the dummy element, and do things right instead - by
passing a *pointer* to the list, instead of the list. And then when
traversing the list and looking for a place to insert things, don't go
to the next entry - just update the "pointer to pointer" to point to
the address of the next entry. Each entry in a C linked list is no
different than the list itself, so you can use the pointer to the
pointer to the next entry as a pointer to the list.
This is a pet peeve of mine. The real beauty of pointers can never be
understood unless you understand the indirection they allow. People
who grew up with Pascal and were corrupted by that mindset are
mentally stunted. Niklaus Wirth has a lot to answer for!
But never fear. You too can overcome that mental limitation, it just
needs some brain exercise. Reading this patch may help. In particular,
contemplate the new "taglist_add_divetag()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user has zoomed in but then changes to a new dive,
we may want to reset the scale back to the original value (1.0)
based on the current zoomLevel, so that the profile is not stuck
in zoomed mode.
This patch adds a snippet that resets the QGraphicsView scale,
zoomLevel variable and also the toolTip position.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a new image resource named poster.png which,
is shown instead of the 3 posters. The main reason for that
is due to the poster text not being visible. This new image
is pretty much the Subsurface logo only.
It also removes the grid lines, while the poster is visible.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Such can be disabled with -Wno-reorder and are clearly
more of a nuisance, but C++98 12.6.2.5 says the order should be
the same as in the class declaration.
On theory this would only speed the compile times a tiny amount.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We had all in place, all that was missing was to actually load
the position stored on the settings for the tooltips.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code cleanup fixes the two issues that I raised on
my last e-mail. hurrah.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the colors on the new profile, the init of the colors map
was not being done. This fixes it.
A few problems were spotted on the new profile dealing with the ruler
graph and a newly added dive, when using the dive add dialog.
I'll be on it later.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just removal of dead code from the old profile, probably there's
still a bit more to remove, but this is a very good cleanup already.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is simply a code removal, nothing was touched besides the
profilegraphics.h/cpp files.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch partially removes the code for the old profile from
Subsurface. It removes the use of the old profile on the mainwindow,
but keeping the code in the tree for now.
A bit of code-cleanup also entered this commit because I had to change
every instance of the code that used the old profile.
Now to the real code-cleanup
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The ruler is a weird beast - it has two child objects that access the
parent to call another function, that call the child functions.
When I updated the plot_info I didn't take that into consideration, what
happened is that when I set the parent's plot_info, the children's
plot_info are still invalid, but the update method is called anyhow.
This patch updates all plot_info's before calling anything else.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We can't keep the cache around (even though it's tempting) as the next
iteration might change the start time of the planned dive or other
parameters which would make the cached data invalid.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
clang-format doesn't appear to reindent multi line #define statements
correctly - so this hopefully will clean those up.
The included whitespace corrections to the code should stay in place when
using the updated tool.
This includes cleaning up some multi-line comments that were messed up the
last time around as well as a few other minor changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Move the buttons of the profile window around to have more sane positions.
- All the buttons affecting the ceiling(s) are now grouped together.
- All the buttons affecting the Information Box are now grouped together.
- The previous icon for "Show calculated ceiling" has been reassigned to
"Show all tissues"
- A new stand-in button hav been included for "Show calculated ceiling"
Signed-off-by: Willem Ferguson <willem@willem-Precision-M4700.(none)>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm not sure about this one. It's possible that there's something
happening behind the scenes that I don't understand. But let's just
initialize this to 0 and be sure.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
tissue_tolerance wasn't used after it was assigned.
type was overwritten after it was assigned.
serial was overwritten after the last /= 100.
event is assigned in the for loop.
clear isn't used after the assignment
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Decrease depth by tapping left part of widget. Icon is showing "up" (i.e. closer to surface).
Increase depth by tapping right part of widget. Icon is showing "down" (i.e. deeper).
Fixes#354
Signed-off-by: Andrey Zhdanov <andrjufka@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Minor change to the perl postprocessing script and resulting changes to
the affected source files.
This deals with two issues:
- "foreach"-like structures were not always treated correctly
- some longer calculations that ended on "+ constant" were reformatted in
a rather unatractive manner
In one source file (divelist.c) I ended up adding braces to the sources...
trying to cascade the indentation further down without having the block
there seemed a lot more trouble than it's worth.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Non-stop Dive Limit (or No Deco Limit) abbreviation is not NTL but NDL
Signed-off-by: Giuseppe 'ferdy' Miceli <ferdy@ferdy.it>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Partial pressures abbreviations should have capitalized chemical element
symbols e.g. pn2 -> pN2
Signed-off-by: Giuseppe 'ferdy' Miceli <ferdy@ferdy.it>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit c84ef319a2 ("Create a toolbox on the left side of the new
profile") Tomaz invented a new TLA: EED.
No one noticed. Oops.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous code just set the button-"status" based on what we stored on
the settings. This sets the corresponding value in our prefs-struct.
This fixes the same issue as in 63f7f3, without the side effect of
magically hiding the mean depth line.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit 63f7f37e46.
For odd reasons this appears to make the mean depth line disappear. This
will require some further analysis, but for now I'll just revert it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch will remove all files that fail to parse from the recent
files menu.
Signed-off-by: Joshua Wambua <joshua@megvel.me.ke>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I know everyone will hate it.
Go ahead. Complain. Call me names.
At least now things are consistent and reproducible.
If you want changes, have your complaint come with a patch to
scripts/whitespace.pl so that we can automate it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This changes the ruler a bit, I hope nobody gets offended by it. :)
The main issue is that the scene is now 100x100 pixels wide, so the font
was *really* huge. and setting itemIgnoresTransformations on the ruler
broke a lot of stuff.
I removed the code that painted the text and created a QGraphics TextItem
for that - that will hold the text for the ruler.
Then I played with the view to get the correct angle of the line, that was
in scene coordinates and thus, could not be used directly on the item that
had ignore transformation changes.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed so the underlaying struct preferences prefs, will be
updated when we set the buttons to there previous state after we
loaded the settings.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the ruler work again, the problem is that the fonts are
*terribly* big, I'll fix that on the next commit.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Increased vertical spacing between spinboxes and checkboxes for the manual
CVS import dialog
Fixes#448
Signed-off-by: Alberto Corona <albcoron@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch toggles on / off the ruler via QSettings.
When the user clicks on the toolbar, this sets the settings to true /
false, in a way that if the user turns Subsurface on/ off, we still get
the last choosed option.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds the RulerItem inside of the new profile, and already takes
settings into consideration.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch removes the GC macros and change the calling to use the
DiveCartesianAxis.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch just creates two files for the rulerItem, a .h and a .cpp.
nothing was done to make it visible on the new profile yet - will do that
on the next commits
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just quick'n dirty glue code so that when the user clicks on the 'scale'
toolbar item, the new profile graphic is scaled.
Lovely thing: Animations for free. <3
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the 'Zoomed Plot' a preference that can be stored and
retrieved, this way if the user sets the plot to be 'zoomed', this
information will persist even if they closed or opened subsurface again.
Also, added the 'Scale' button on the new profile, but didn't did the glue
code yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Default font was hardcoded as 14.
What happen if you change any other preference value is that the
application would start to use fontSize=14.
This commit loads the right value in the QDoubleSpinBox
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
if the user tries to redownload something from its dive computer
the interface will be stuck since progress_bar_text won't be empty in
the second run.
Even if I don't really like this idea of that value being changed by
downloadfromdivecomputer.cpp and libdivecomputer.c, that value needs to
be reset by someone.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simple patch to enable/disable extra buttons while downloading.
The UI should be blocked during the download.
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to use the transform() of the view, not the tooltip.
Suggested-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This appears to correctly add the tooltip to the event item, but for some
reason the tooltip isn't displayed for most events.
Still needs more work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows us to give it a different color (red) and make it a smaller
size.
While implementing this I also fixed the size of the temperature text in
the new profile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This also fixes the whitespace in a function that I instrumented to figure
out what's going on. I restored it to its original state, but I couldn't
leave the whitespace unfixed...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Admittedly this code doesn't do anything useful right now, but at least
have it not to anything useful in the right spot.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For reasons that I don’t understand, the image is only shown if the event
happens to be at the same time as a depth sample. This is, however, not
specific to these image events, it seems to apply to all events.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Edit mode must be cleared for manually added dives as well when one hits
cancel or save.
Fixes#437
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The only thing that was missing was the size of the vertical axis. I'm
setting a small line on the bottom of the temperature axis, since both
have blue color, this will not make people think one is the other.
TODO: change the color to red.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was done during an IRC hacking session with Tomaz.
It compiles, it shows something but not the right graph.
Committed here so Tomaz and I can continue to work on it.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In Qt5, Qt doesn't define TRUE/FALSE anymore, so we need to stick to
stdbools to have Qt5 builds working.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now the search button isn't connected for any device (clearly an
oversight). At least for the Uemis I think I have a sane implementation of
what that should do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some digital cameras do not set the DateTime exif field bat use
DateTimeOriginal. If the first option is not found, use the second one
to try to detect the moment when the image was shot.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I get compile errors from these lines. Removing the class name from the
calls allow me to compile the current master.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code of the context menu and the gas change event callback is mostly
the same as the old profile, with minimum modifications, as this changes
the order of the code on the callback to make it a bit saner (declare
variables first, call code later).
This also fixes a bug on the model that was not cleaning itself in the
correct way after a call to clear.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just an attempt to not have the time markers and dive computer
name printed right on top of each other.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Fiz zvalue of the partialPressure Gas Graph over the TimeAxis, and also
corrects the position of the PartialPressure gas graph. It now no longer
appears to 'float' over the TimeAxis, now it's on the very top of it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch creates better defaults for the grid lines, size, position and
z-level.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Create the grids, and the way that they move is fabulous <3
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change the axis update method to move the lines alongside the texts.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This function is for non-duplication of code for different QLists, since I
now have Texts and Lines, I needed to make the code in a way that it
worked without dupplication.
It's a pretty standard use of templates, I think that even the C guys will
not be offended by it. :)
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This class was pratically a re-do of the axis, I'll do the axis to plot
the lines when it feels like it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The events were static on the canvas even if the profile changed its size
because of a toggle of the partial pressure gas. This patch makes events
move on the canvas to their correct place.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The first depth label of its axis is always zero, do not show it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That particular dive didn't have a temperature, and thus we got a crash
while accessing the last temperature text.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way the partial pressure graph can have smaller pressure labels than
all the other labels on the profile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously all text in the new profile was deawn in the same font. With
this change the labels on all axes are smaller.
It might be even better to allow per-axis configuration of the label size
as along the time axis the bigger size looked better. But especially for
partial pressures this looks much better.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user never clicks on the log and dump checkboxes (and that's what
we expect to be the case by default), then the log / dump flags (and
filenames) were never initialized.
I am reasonably certain this will close the following three bugs, that all
show the same symptom: they behave as if libdivecomputer dump was set,
even if it wasn't.
Fixes: #426Fixes: #431Fixes: #435
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last temperature text used to have the same align flags
as all the other texts: Right. this makes it much more appealing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code shamelessy copied from the old profile introduced
a bug where the old temperature was not correctly shown.
I'v added a new member to the class that will store the
last valid temperature, and use that to calculate if there's
a reason or not to display it.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just removed the unused tanks from the toolbar,
since it's just a removal of something on the ui
related code, it's good to see how much verbose
the xml to generate the UI is.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
First attempt to use the tools on one of our source files.
So far so good. Not perfect, but a HUGE improvement.
Most importantly it effortlessly fixed the Allman style braces introduced
in commit 51220f26ef ("Add recent files to main menu.").
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add(up to four) recent files to File main menu.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
C++ style of accessing single instance class object.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we move, shrink or expand the depth axis, the
meandepth should also change it's position. this
patch adds that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The extra axis labels on the Temperature and Cylinder Pressure
graphs are not wanted in release mode as they create a lot of visual
clutter, but they are useful to have in debug mode since we can then
better understand what went wrong.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Same as the last commit, but for cylinder pressure. Another bug
was spotted, where the mean depth line does not move to the correct
location after a axis-size-changed - fixing that on next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds shrinking of the Temperature axis when partial
pressures are shown. This adds an unwanted side effect however,
the axis started showing it's values - and we didn't do that on
the gtk version or on the old profile. While this is good for
debugging, it's not wanted for the software if it's on release
mode. I'll fix that in due time.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user checked the option to show or hide the partial
presure graph the size of the profile graph was kept the same;
usually I do those changes on the objects themselves, on the
settingsChanged method, but since the calculation of the
size of the profile was done on the ProfileView class for
consistency with the other objects, I had to change it there
too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The coding style for switch isn't the prettiest, but let's at least keep
things consistent.
Also, those ugly break statements never got reached, anyway.
And there was no need to re-declare and re-generate currentString.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't have nested loops with the same loop variable. Really. Even if it is
legal C++.
And don't declare local variables more than once. This will only cause
issues later.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If you need to use this->error to distinguish the local variable from the
object membe that should be a hint that maybe you didn't pick the best
name for the local variable.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the variable was inside of an inner scope this was technically legal,
but it's just too annoying for words.
(The diff in the commit doesn't make this obvious, but outside the for
loop in the same function there is a divedatapoint *dp, so we had a
pointer to divedatapoint and a divedatapoint with the same name...)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I could have gone either way - the other alternative would have been to
remove the argument to the function. But since current_dive is a macro
and since the semantic of the function make sense with the argument being
passed in, it seemed better to just not use current_dive in the function.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
SAC should be calculated in relationship to surface pressure, not "1 bar".
I also realize that we have a few other cases where we do the same
mistake: the partial pressure calculations do things like
po2 = o2 / 1000.0 * depth_to_mbar(sample->depth.mm, dive);
which is wrong as well - the partial pressure is also relative to
standard atmospheric pressures.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* ensure include guard to every header
* comment endif guard block
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If I click in the Preferences Dialog on the 3 dots to choose a default
file to load and cancel the opening FileDialog an empty string is returned
and set to the coresponding QLineEdit.
The new behavior (and mostly expected) is to update the QLineEdit only
if there is a filename returned from QFileDialog.
Signed-off-by: Patrick Majewski <dive@patrick-majewski.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Yes, the old code made perfect sense when you read it - except the C++
compiler turned it into something quite different from what was intended.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
They should have a newline at the end.
Forward declarations of classes should be 'class'.
Function / method definitions don't end on a ';'
Remove obsolete QStateMachine forward reference.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
plotDives takes a list of dives (for future use) but currently only looks
at the first dive in this list. With that semantic in mind we can save
ourselves some work if we first check if this is the same dive we are
already showing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* This should never be called with a NULL dive.
* The dc variable was set then never used.
* We now have a unique id for each dive, but we can't simply not
repopulate the model in setDive as the old comment might make you
consider, as otherwise the dataModel will reference already freed data
in pInfo.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We carefully extracted the first dive passed in with the QList, but then
always used current_dive. That's silly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those items have parent(), which means that when the parent has a scene,
they are automatically added and removed from the scene.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Background was not correctly back to it's original position
and a few other items kept their visibility when it shouldn't.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch does a few things:
1 - reset the model when user closes the dive file
2 - connects the 'rowsAboutToBeRemoved' in a way that the graphics can
remove their polygons too
3 - adds a 'clear' virtual method so items that don't follow the rules can
clean themseves up.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If readfile fails it already frees its buffer.
If the parsing failed we shouldn't use the data in the structure.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Allow subsurface to show the dive planner in case a compile flag is given.
qmake CONFIG+=planner
Signed-off-by: Danilo Cesar Lemes de Paula <danilo.eu@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
But in general we should not show the profile of a dive that
was recently removed from the list - e.g. via File->Close.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The profile info was generated using nasty string concatenation that the
membuffers are much better at anyway. And membuffers don't need those
arbitrarily sized fixed buffers (500 bytes? Why 500 bytes?).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Add missing variable members to the initializer lists.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Add missing variable members to the initializer lists.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Add missing variable members to the initializer lists.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Move variable members construction to the initializer lists.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Initialize every ToolTipItem variable member in initialize list.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Add colorIndex to initialize list.
* Reorder initialize to correct order.
Note: colorIndex initialize value is set too SAC_DEFAULT. I do not know
what is the rigth value since this variable member is not used anywhere.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Initialize/construct all variable members in constructor list.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Add missing improvements::diveId variable member to the initialize list.
* Cleanup DivePlotDataModel::pInfo structure instead only one member.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Initialize variable members in DiveCartesianAxis class.
Note: Initialized values I put needs to be doublechecked.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Initialize DivelogsDeWebServices::uploadMode in initialize list, instead
of constructor body expression.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
* Change 'searchBox' member type from 'QLineEdit *' to 'QLineEdit'
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All of these are now set from the toolbar next to the new profile. This
removes functionality for people using the old profile, but as we will rip
that out and switch to the new profile, soon, that seems an acceptable
side effect.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Load all the settings in the PreferenceDialog constructor. Previously
all the settings were overwritten with default values the first time
PreferencesDialog::syncSettings() was called.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Main change is that now SubsurfaceAbout doesn't have instance object, but
it constructs and destructs dynamically.
* Remove the static SubsurfaceAbout::instance() class member
* construct/destruct about dialog on demand
* Other small aboutbox cleanups.
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
ACK-ed-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Ancient code that was unused and only adding complexity to the
DiveCartesianAxis.
Also remove the spacing between the text and the lines of the Axis.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch re-enables a few items on the profile, most notably, the
profile itself.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Comment out most of the items on the profile since they are
currently completely broken ( positioning, etc ).
Also, remove the settingsChanged stuff from the DepthAxis because it
doesn't have the shrinked / expanded size on it ( it sits on the profile
code ) so I'll most probably move that to the profile settingsChanged in
the future - or if anyone knows of a better place to have this, I'm all
ears.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The setup of the item positions for the profile state should be done here.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Show a nice poster that Luisa did for Subsurface ( we have a few other
options that I'm waiting her to send. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Change the 'namespace ItemPos' declared on the commit before this one to a
struct that will have all the 'on canvas' and 'off canvas' positions and
representations of all items, so we know where to change.
Also remove the remaining stuff from planer that was going to exist on
this profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This addItem was being called twice, and a warning that the item was
already in the scene was annoying me.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit breaks the whole new profile. <3
The problem with the old code is that I was using the QStateMachine
and I just got tired of it. I will implement a much-simpler state
machine to do what I want instead of hitting my head on the wall
to understand how that was supposed to work.
This commit also adds a few helper methods to simplify the understanding
of the constructor and tries to make the logic a bit better. No graphics
are being show right now. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch starts the cleanup that will take a few iterations to finish.
The current profile code uses QStateMachine, and it's much too verbose
for something we can do with less than a third of its lines of code.
I also added on the beginning of the redesign of the profile code for
planner, edit and a few other things that are going to be ported to
the new profile in the future, but not currently - I just lack the time
to make that work for the next release.
This commit basically:
- moves all 'new' calls to the initializer-list
- create a new 'setupItem' private method to concentrate the calls
that any item will do
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed because of a braindead issue on the Qt event
loop:
http://stackoverflow.com/questions/10059721/qt-qstatemachine-sync-problems-initial-state-not-set-on-started-signali
For the "event 1" to be received, the machine must already be
in a state that react to that signal. Even it was a queued
connection, the slot would be queued but only after the signal
was received, which it isn't since there is no connection
yet at that point.
To solve your problem, you can wait for the machine is in
"state A" before emitting the signal:
machine->start();
qApp->processEvents();
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will probably be added back in the future, but for now
they have no use and it was making me nauseaus.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Populate the status of the profile tool box as soon as the program
starts.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we have now a mix of old / new prefs, remember
to change both when we alter something.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I had a few very strange bugs regarding to preferences (like clicking on
apply twice so things worked), because the code that moved from
"QSettings" to 'Internal Settings Struct' was being triggered on the
mainwindow, *after* the settingsChanged signal was emmited. This should
fix the problem.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds an entry to the dive list context menu to load images. The user
can select image files and set a time offset to align camera and dive
computer clocks.
Using the exif time stamp the images are tried to match to the times of
the selected dives (with a grace period of an hour before and after the
dive). Upon success an event of type 123 is created per image with the
string value being the path to the image. Those images are displayed as
thumbnails in the profile. If the matching dive does not yet have a geo
location specified but the image provides one it is copied to the dive
(making the camera a poor man's companion app).
This patch includes easyexif https://code.google.com/p/easyexif/ which is
originally under a New BSD License to parse the image meta data.
This commit includes a new test dive dives/test31.xml with a matching
image wreck.jpg to try out the functionallity.
Obvious to do's:
Have images on the map
Have the images clickable
Have a proper picture viewer
Give visual reference for image time shifting.
Use the new profile
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For quick acess of preferences the show / hide stuff from the Settings
dialog is now in that toolbox and in the future we can put a few more,
like 'Show Notifications Panel' and 'Enable Legend'
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds an event filter to hide normal tooltips on the new
profile. All tooltips should be displayed in the Notification Area.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes use of a cache variable instead of creating / accessing a
new one via operator[], because for some reason QGraphicsPolygonItem
doesn't return a reference for polygon and a copy is always made.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this patch the tooltip is ready to work on the new profile, we just
need to actually use it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The functionality is not there yet - just the item hovering
the screen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is needed so we can share the dive tooltip item with the
new and old profile at the same time. Next few commits will be
setting the functionality of the tooltip item on the new one.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Set showWithPPGraph so that animateChangeLine() is always called the
first time settingsChanged() is called.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This works in a different way compared to the old widget.
To make it work we use vieport()'s height() and width()
and simplify the scroll position to:
scrollPosition = (mousePosition / totalLength) * scrollMaximum
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch uses the same code that lubomir used on the
old profile. It strangely didn't worked - most probably
because the scene has a fixed width() and height() of
100. the zoom works, and the movement works, but only
on the 100 first pixels of the profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch optimizes a few items when hitting the
'save preferences' dialog, since when a preference is
modified, all the items try to reload their visual
based on wether a preference changed or not, the correct
code for 'hey, my pref changed, let's update' needed
to be done.
now the axis will only set a new maximum if it's different
from the old one ( and thus, going to a new dive with
the same maxdepth or maxtime as the old one will not touch
their axis, not triggering gratuitous animations. )
also, the 'incr by 3m' was not being called - it seems
that our 'syncsettings' method is not storing things on
the 'prefs' global var. I added just for the incr by 3m
case, but it's something that we need to check later.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Created a method to check if calculations should take place
taking into consideration what changed on the model. if the
model changes *everything*, them, all calculations should
be done, but if just some of the columns of the model are
changed, only those columns should trigger an visual update
on the items.
In theory this patch looks right, but something is wrong (
calculations are not being made. ), so I'll commit this any
how, and fix on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The gradient factor is shown with this patch, but the correct position
should still be adjusted.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch only adds preference-awareness for the ceiling.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last commit made the time and all other axis behave like the time
axis. Not cool.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit adds the same behavior for the old time markers on the new
ones.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Do not create a text label if the returned string is empty.
Also, fixed a potential crash after not creating a label and adding it to
the list of created labels.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the color of the cylinder pressure use the sac colors.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit is rather big, and I forgot to cut it in pieces.
The first part creates a new 'calculate_gas_information' that will not
fill the profile_info->maxpp member ( that should be removed from it as
soon as the new dialog is finished ). The reason for that is that all of
the profile data will be calculated and the graph needs to update
dynamically, so whenever the settings changes, I ask for the model which
is the biggest graph and replot only the ones we need.
The second part adds a new animation function 'animdelete' to fade-out and
delete the item when it's done. the old function 'hide' did just that but
a hide shouldn't delete anything.
The third part is preferenes awareness for the PP graphs. I created two
new functions that receive the settings key for visibility and use the
QSettings to show / hide them. This also works quite well for the axis;
if no graph is visible, the axis will also hide itself.
The fourth part is colors. The pp graphs now have the correct colors.
And a bit of code cleanup too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Strangely enough, on the system I build this, I don't see the crash. But
when I create a DMG and run it on a different Mac, it crashes if
updateTicks() is called but scene() still returns 0.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code sets up the C++ part for importing manually kept CSV log.
That includes setting up the field separator selection and calling
C-code for parsing the log file.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Important to note that no Partial Pressure Graph handles
settings yet.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using the PartialPressureGasItem the addition of a new partial plot
is very easy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the beginning of the partial gas pressures, there's
two more. but this code uses a good part of the Model View system,
and it's way clearer than the old one. Luckly the other 2
missing items will be even more clear ( the diffs ) to do,
because I just need to create a new PartialPressureGasItem and
set the properties. <3
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch prevents memory leak by adding the text on the list of
'delete me when model changes' items. it also makes things a bit more
snappy because the scene doesn't have to deal with all of the
texts bounding rectangles eveytime.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
the profile item should also use the model to know when to
change something, this makes it happen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch moves the temperature item as a cache that will
be updated as the model updates, instead of deleting / recreating
it everytime the dive changes.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last patch correctly moved the GasPressure item to use
a cache-based system, but ignored the fact that the Gas
pressure text was not being removed from the scene. this fixed
it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the Gas Pressure Item a 'cached' item, when the dive
changes, the item will regenerate the drawing based on it's model.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the Tissues be used as a 'cache', it will not
be deleted untill the program closes, but whenever a new dive is
selected, the old drawings of the tissues will be regenerated,
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a new class DiveCalculatedTissue that's preferences aware.
It knows when to show or hide itself.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we will always have this object on screen, and as soon as the
model changes, it's contents will change.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The reported ceiling now behaves better by not being deleted / recreated,
instead it uses the same object and connects to the model to know when to
regenerate its plot.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the cartesian axis of the profile depth shrink and
(together with it) the Profile Depth and the grid lines. There will
probabla bey a lot of things that didn't have their correct position
fixed, so I'll fix them in the later commits.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Almost all of the items on the new profile were being painted
on the same ZLevel, so the level of awesomeness was a bit random.
This puts things on the correct spots, events on top of everything,
profile at the bottom, things in the middle.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Dirk's implementation of the MeanDepth item was correct, but in order to
add the 2 strings to it ( one at the begin, one at the end ) I had to put
more stuff inside the ProfileWidget that's already packed with graphics
items.
So I created a new class MeanDepthItem that contains these 2 strings and
will get updated whenever the value changes.
I also fixed a math inconsistency where I changed RIGHT to LEFT.
(wich fixed a few text-placements, and broke others.)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the preferences changed signal is fired, the items that can change
their visual based on the preferences now have to reimplement the
preferencesChanged method, so they know if they need to be replotted on
screen. I already implemented that for two of the items ( ProfileDepth and
Ceiling ) but others might need that too.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code actually uses the preferences for something. It will show and
hide the calculated ceiling in red if the prefrerences are changed for
that. One bad thing that I did in this commit ( so it was easy to try ) is
that a preference change will redraw the whole graph - not optimized. I'll
make this better in a later commit so that only the affected items will be
redrawn.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is an attempt to speed up painting a bit. Since we will draw the red
ceiling on top of the profile, I don't see a reason to dig a hole in it,
creating an more complex shape to be passed to the painter. Easier shapes
are easier to draw. ( I think )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds dive computer calculated ceiling on the profile graph as a
'hole' on it. There's an item that paints it in red - maybe we shouldn't
offer an option here and show that only in red?
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Test for max_temp == min_temp to prevent math overflow when calculating
temperature axis in new profile
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This item plots the DiveCalculatedCeiling over the profile. I still need
to add the Calc All Tissues version.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just adds the texts for the gas profile. I've also added a method on
the dataModel() to return the diveId of the last used dive in a way that
the other methods can use it.
This code is almost 1-to-1 with the old one, a bit of thinkering can be
used to merge this loop with the upper one.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of asking the data as we do on the generic models, use the
internal knowledge of the class.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the dive computer text on the bottom left side of the new Profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Changes the ZValue of the event items so they are plotted
on top of the profile, instead of being hidden on some.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch just cleans a bit the Cartesian Axis, we never used
ticks on it, just the grid lines ( that I need to animate a bit. )
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fixes temperature text replacing the old code
with the new DiveTextItem.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This uses a combination of items on the canvas which makes it easier to
position it where I want.
This also broke the other texts because I forgot about them. I will
fix that on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Removed the plotText function and replaced it with the
DiveTextItem class - this way there's just one way to add
text on screen, and it also makes it easy to fix positioning
of stuff there. Which is what I'll try to fix on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Split divemaster field value using comma and populate completion list.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we use tags widget for several input fields (tags, buddy,
divemaster), it makes sense to keep focus policy setting in one place.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This prevents tags widgets (dive tags and buddy) from grabbing
focus on mouse wheel events but allows entering dive edit mode
on mouse click.
It was attempted earlier by Dirk (commit d117beca), but edit mode
did not work properly.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With massive hand-holding by Tomaz.
Writing for the new profile code is slightly different. You don't draw
anything, you just tell the widget where things are supposed to end up and
how they are supposed to look. Really nice.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The gasPressureItem needs to be initialized to null in the constructor.
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I Moved the 'plot text' method of the Old Graphics to the new
layout - this one was mostly unchanged as it was already good
as is.
And used the TemperatureProfileItem to also display texts.
This was the first implementation of the new system that uses
*less* code than the original one, wich makes me happy.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the Gas Pressure Graph with the related Model Changes
to access the cylinder index, pressure, interpolated pressure
and SAC.
The plot does not correctly plot its color right now but it's not hard to
do.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This version of the create plot info is the same as before, with the
difference that it doesn't depends on the gc.
Also fixed a crash.
The Pressure Index, Information and interpolated seems wrong,
I'm getting only zeroes.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added missing information about the pressure to the model; this shows that
I didn't do something right, as the model has 0 pressure information. Need
to fix that on the next commit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The cylinder pressure axis is the 'Y' axis for the Cylinder plot.
I positioned it in around 20% to 60% of the screen state.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since I didn't add a pixmap to be the background of the new profile, yet,
things got wrong on mac and crashed. This should fix it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes a warning about the QGraphicsItems not being on the
QGraphicsScene, and thus, cannot be removed from it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old graph didn't display the time axis, so this will
also not display it. By not calling updateTicks the labels
and ticks of the Axis are not created.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now we can create an axis that's topToBottom, BottomToTop, LeftToRight and
RightToLeft.
This was needed for the Temperature Plot, because it should be inverted
(starting on the bottom).
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Added the Temperature Graph with its related classes. A Temperature Axis
is also created so the item is plotted on the right place.
Currently the Temperature Axis is just like the depth axis - top is
zero, wich means that the graph is inverted.
Also, the Temperature axis is being displayed as this helps debugging.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The DiveProfileItem contained much of the complexity and
algorithms for almost all line-based items on the canvas,
so I transformed that to a general abstraction and implemented
a new DiveProfileItem that uses it. this should reduce a
bit of code since the implementation of the PP Graphs, Temperature
Cylinder Pressure and maybe a few others will only need to
reimplement the paint() and the modelDataChanged() methods.
The rest is ready.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply pass a event to the item and it will know what
to do. The sad part is that this isn't true yet - there's
quite a bit of boilerplate that a lot of the items are needing,
but the good part is that the boolerplate is the same in
all of the items, which means that I can create a tiny bit
of abstraction to encapsulate it and the code will be
way smaller to setup the items on the canvas.
Right now the items are being correctly placed on the
right places. It doesn't supports hidding / showing yet.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code for this item is a bit too big to be just the grid
of the dives and I know that, don't bully me. :)
The main idea of this grid is that it knows when it should be
updated. this is a bit different than the old code where all
the painting happened on the same method. This is bad because
it's more code, but it's better because if I break the grid,
only the grid will be broken, and it's easyer to spot the breakage.
in the old code if I did the wrong thing with the graphics context,
the whole graph gots messed out.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was a bug in the old implementation where we needed to
trigger a repaint of the profile almost everywhere. this isn't
needed anymore on the new one, so do not use the same method
that will be killed when I finish this.e
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This method gathers information about the max and minimum sizes of
the cartesian axis that we should plot. It's still a bit cumberstone
for my taste, but this shouldn't be a problem. I think we need to
rework the 'Zoomed' version of it, since zoom or without zoom,
we should be good to go using the QGraphicsView.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As Sensus import needs a specific XSLT and user specified parameters are
not used nor needed, tune the GUI accordingly (disable options and add
Sensus in the list of known imports).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is just to make it more obvious when new issues get introduced. The
build should always be free of warnings...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Another futile attempt to cleanup the code and make coding style and
whitespace consistent. I tried to add a file that describes the key points
of our coding style. I have no illusions that this will help the least
bit...
This commit should ONLY change whitespace
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Tomaz code had us start on the depth model tab (when built in debug mode).
It seems to make much more sense to still show the fully featured profile
by default.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Created a new version of calculate_max_limits that doesn't have a
graphics_context and returns a plot_info. The code is basically the same
as the old calculate_max_limits, so there's not much to talk about.
The rest of the code is just boilerplate to plug the Profile
code with the axis and model stuff, to be plotted on screen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit adds a QTableView if built in debug mode. This is very userful
to understand the Profile that will be drawn by the graphics classes and
fix the possible errors.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The state machine needs to be started before it works; now the animations
are working. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There's a Qt visual debug / helper tool made by KDAB named GammaRay that
uses QObject instrospection to understand what's happening on a QProject.
This tool uses the Object Name to display the items on a list, so I've
added the QState's names to their objects, which greatly helps debugging
with Gamma Ray the states of the StateMachine.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The context menu added here should only be temporary, it's an easy and
simple way to test the transitions of the items on screen.
They seem a bit broken atm, I'll try to fix that. :)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code creates the animations that will be triggered when an state
changes. Things like hiding items and such should be handled this way.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just removed some code that I tougth to use, but it looks
like it's just a waste of lines.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It seems that I forgot to add the background pixmap, but this is being
done right now by luisa. This patch fixes the size of the scene by
scaling everything to the size of the viewport as soon as a resize is
done, and it also fixes the size of the - to be included - background
pixmap.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code adds all state transitions for the items on screen; they do not
animate yet, but already move to the correct location (the location seems
wrong on the screen, because I'v not correctly zoomed out the canvas yet).
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Those constants will be used later on to setup all transitions of
the Graphics Items on the canvas. They are the correct positions
of each item inside and outside of the scene, in a way that the
state machine can animate them smootly.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a start of the work on the States for the Profile. All setup is
done, all connections are done. Maybe there's something missing because I
never worked with QStateMachine before, but it seems to work correctly.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The background should be a Pixmap and thus it cannot zoom in or
out; this keeps it the same size always, the full height of the
scene.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Setup the default item sizes and locations inside of the QGraphicsScene.
Also added every item to the scene so that it's correctly displayed on
screen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Beginning of the code for the constructor, just constructing
some of the items and preparing for the State Machine to come.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Created a Time Axis based on the CartesianAxis that knows
how to plot the minutes. This is needed because the CartesianAxis
donesn't knows about minutes at all, and would plot the
seconds instead.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The CartesianAxis used a simple method to put things on screen
which is wrong for almost any case besides the 'current value here'
since we store things in milimeters on the axis, we need to convert those
to meters before showing on the profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This call just passes the selected dive to the new profile widget. No
drawing is performed, I still have to setup the constructors and the rest
of the initialization of the new Profile.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I've used the paint() method on it ( even if it's not necessary
on a QGraphicsView ) to reduce absurdely the number of items that are
inserted on the QGraphicsScene ( each small line of the profile should
be an item if it was not for this, it's like that on the old profile. )
and thus reducing the memory consumption, speed and so on.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This model encapsulates the plot_info struct and provides
a consistent way to show it using the Qt Model view system
in the C++ and QML way. For a QGraphicsItem that should show
a Profile, this is the start.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we prepare the axis to show something on the Profile
we need to add the remaining ticks to show on screen,
Since this method tries to animately move / remove things
before calling this.
This has no animations yet - will have in the future.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the size of the Axis changed, this should move them smootly to their
place.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes the updateTicks method not remove / readd everything
when it's triggered, but to only remove the ticks / labels that
are no longer needed on the current display.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the same class as the Ruler, but uses the DiveLineItem
and DiveTextItem classes created to make it animateable. The next
few commits will work on that part. The Ruler was a very bad
name for a class that's actually an Axis, that's why I depreceated
the later.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the animation methods are fairly the same for any QGraphicsItem,
I created a new namespace named 'Animations' that should handle all
of the specific Animation Functions there, and the programmer has to
call those functions from the objects. Good thing is that this reduces
boilerplate code.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit adds a class based on QGraphicsSimpleTextItem that
handls animations via animatedHide() animatedMoveTo() and a few
other QPropertyes. This is to be used in conjunction with the
DiveLineItem added in the past commit on the Coordinate Axis.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This class has animatedHide, animatedMoveTo and QProperty
animations. it's very userful for the future creation of the
Cartesian Axis that will have the ticks 'flowing' around when
it's needed.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This class is useful for adding / removing icons on the future profile in
a way that they are smoothly added to / removed from the canvas.
It uses the QProperty System to deal with animations.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This class extends the QGraphicsRectItem with the ability
to use the Qt Property System - and thus, we can animate
the properties. Initially I put only the rectangle, the
position and the x and y positions indidually for testing.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The idea of this widget is to display and edit the profile.
It has:
1 - ToolTip / Legend item, displays every information of the current
mouse position on it, plus the legend for the maps.
2 - ToolBox, displays the QActions that are used to do special stuff
on the profile ( like activating the plugins. )
3 - Cartesian Axis for depth ( y )
4 - Cartesian Axis for Gases ( y )
5 - Cartesian Axis for Time ( x )
It needs to be dynamic, things should *flow* on it, not just appear / disappear.
It's the last attempt to create a QGraphicsView based Profile System,
as the next will most probably be written in QML.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seems it's related to bug #390. Not sure whether this fix is correct.
See #390
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This doesn't change storage format. Instead it parses buddy strings and
converts them to string list which is supplied to tags widget.
This feature was requested in ticket #311
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While preparing to extend tags model to 'Buddy' field we populate
completion list by splittng those fields by comma.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are at least two scenarios where our old code was flat out wrong.
If you manually add a cylinder (because you may want to switch to it in
the profile), then at least until the next time you restart Subsurface
this cylinder should be shown.
Also, when you switch to a cylinder by adding a gas switch event on the
profile, that change should then make that cylinder visible.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This code had parts that where Qt5-compatible, this introduces the last
bits that it needs to be completely compatible.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Recreate the labels in the marble window (this adds all the new locations
with the correct labels), center on the selected dive (this makes sense in
case this is one of the dives that got location information) and redisplay
the main tab (again, as this might now have location information).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- make the User ID input field wide enough
- use the progress bar for an explanatory text
- mark it as 100% completed once the download succeeds
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch enables main window full screen mode by menu toggle or pressing
F11.
[Dirk Hohndel: whitespace cleanup]
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Pre-configured imports in Import Dive Log File for CSV files should also
be cleared when the field separator is changed by the user.
Promoted DiveLogImportDialog::unknownImports to slot as per Canabrava's
suggestion and Hohndel's request.
Signed-off-by: Rodrigo Severo <rodrigo@fabricadeideias.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Pre-configured imports in Import Dive Log File for CSV files should also
set the pre-defined field separator.
[Dirk Hohndel: cleaned up hideous whitespace]
Signed-off-by:Rodrigo Severo <rodrigo@fabricadeideias.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Some dive computers will always download all tanks that they store, not
just the ones used in a dive. Most people only want to see the tanks that
they actually used during the dive (and for the others there's an option
to go back to the old behavior, just in case).
All this is only in memory / during runtime. If the dive computer provided
the extra data we will not throw it away.
Fixes#373
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make search panel floating so that web view does not resize.
This commit also addresses following issues:
- search now wraps around document
- application icon and window title are now back
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The shortcut may be used elsewhere, e.g. in user manual
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now never remove units or percentage signs, and always just compare
the string data, so we should remove the hacky arguments that are no
longer used.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This matches the pattern of unit conversion, and will allow us to remove
all the code that uses the old complex "CHANGED()" macro that tries to
remove units or percent signs.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Whittling down on the string parsing that doesn't check user-specified
units. Still need to handle temperatures (and will do percentages to
match the pattern too), but this is getting us closer to always honoring
user-specified units.
With this you can say that you have a "10l" cylinder at "3000psi", and
it will do the right thing (it's basically a 72 cuft cylinder in
imperial measurements).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This just adds (and uses) a string_to_pressure() to parse pressure units
correctly when filling in cylinder pressures.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's currently only used for the setting of the cylinder switching
depth, but now that one should work with user-specified units (so you
can set a max depth in feet even if you use metric, and vice versa).
In the future, if we also make the unit preferences something you can
pass in (with user preferences as a default argument value), we might
want to use this for parsing the XML too, so that we'd honor explicit
units in the XML strings. But the XML input unit preferences are not
necessarily at all the same as the user preferences, so that does
require us to extend the conversion functions to do possibly explicit
unit preference selection.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The C library doesn't use const char pointers for legacy reasons (and
because you *can* modify the string the end pointer points to), but
let's do it in our internal implementation just because it's a nice
guarantee to have.
We actually used to have a non-const end pointer and replace a decimal
comma with a decimal dot, but that was because we didn't have the fancy
"allow commas" flags. So by using our own strtod_flags() function, we
can now keep all the strings we parse read-only rather than modify them
as we parse them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Make it use 'weight_t' and hide the "grams" part inside the type. That
was the whole point of the weight_t type, after all. Returning a
"double" was always bogus, since we internally always do integer grams
(and the function actually used "rint()" to get all the rounding right
anyway).
As a result, it's now called "string_to_weight()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do not need any import dialog when importing normal XML based
divelogs. With this they are imported directly after file selection
dialog. However, when CSV files are detected in the import list, the
configuration dialog is displayed and applied for them. (CSV files are
detected by file extension.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the 'logfile_name' and 'dumpfile_name' were NULL we can simply
strdup() them with a new value, but if there was a previous value
we need to free() first.
C99 6.7.8 allows us to keep said variables without the
explicit NULL initialiazation.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit c3fe1a9e9f ("Get rid of pointers to dive structures in the
UI") I was a bit too aggressive moving away from pointers to dives.
This is only needed for pointers that are held across operations that
could change the dive_table. I figured that it wouldn't hurt to get rid of
some more pointers as well, but it turns out I was wrong. The current dive
that we store in the Cylinder and Weight models can be a dive that isn't
in the dive_table at all: the multiEditEquipmentPlaceholder. And when
using the diveId we end up finding the original dive in the dive_table and
therefore modify the wrong structure.
This undoes two thirds of the above mentioned commit.
Reported-and-analyzed-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Turns out this function can be called when there is no valid dive - so
only protect those parts that dereference the dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The assumption that the pointer will keep pointing to a valid structure is
fundamentally flawed. And even if that is true today, it might change in
the future - just don't do it. Use the diveId instead.
The exception is when you own the structure and use it within one UI
interaction during which any way to change the dive_table is disabled
(e.g., while adding / editing a dive).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Restoring the selection was not setting the selected dive as current, and
thus, breaking keyboard navigation.
Fixes#402
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Just one of the completers had Qt::CaseInsentitive set,
setting for all of them.
Fixes#400
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In commit 528d0ea0e7 ("Print numerical value of mean depth") Miika once
again forgot the three non-metric countries on this planet... :-)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will print the numerical value of mean depth to the profile graph.
Fixes#405
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have the wonderful Qt string functions. Let's use them to make the code
simpler and easier to read.
Suggested-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a dive contains no cylinders, clicking the '+'
button could SIGSEGV if current_dive->dc.model is NULL.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Changing the import stuff to DiveLogImport. Now we should have one
import function/dialog for importing divelogs instead of multiple menu
entries.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch merges import dialog with CSV import dialog. The aim is to
have only one import menu entry for log files. This menu entry pops up
an import dialog that has tabs for different types of imports (supported
dive logs and CSV configuration currently).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
changes the location coordinates display in the main tab
to use ISO6709(2008) Annex D suggested format.
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The imperial cylinder sizes are not just in cubic feet: they are in
cubic feet of gas at STP. So the imperial/metric difference is not
just about converting blindly from liters to cubic feet, you also have
to take the working pressure of the cylinder into account.
This was broken by commit f9b7c5dfe9 ("Make units in cells
consistant in CylindersModel"), because those poor sheltered Swedish
people have never had to work with the wondrous imperial cylinder
sizing, and think that units should make _sense_. Hah.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of always assuming that all numbers are in the users locale
weight units, allow the user to say "kg" or "lbs" explicitly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Note that this is IMHO the wrong fix. Because we shouldn't just ignore the
units, we should do correct conversions.
Before this patch, if the user is in metric mode and then types in 4.5kg
or 10lbs for a weight, Subsurface ignores the entry and throws it away.
Very much not the expected behavior.
With this patch Subsurface will take the value, but ignore the unit and
assume that the user meant kg (since it's in metric mode). Still not
really the expected behavior for 10lbs (which is now 10kg), but if the
user typed 4.5kg (which admittedly is much more likely), then with this
change Subsurface will do the right thing.
Fixes#395
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the common user, a field number is more intuitive than field index.
So let's use that in numbering CSV import fields.
Fixes#388
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Ubuntu, new events have time zero. This is fixed by resetting
gc.rightx to maxtime at the end of plot function.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Bookmark with compass heading is named 'heading' and should use the
bookmark icon.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And prevent the user from editing equipment in trip edit mode (those edits
are both meaningless and of course will be ignored once we save the
changes to the trip).
Also moved some code for setting up tanks, weights, tags, etc, into the
"this is not a trip-edit" part of the updateDiveInfo() function.
Fixes#392
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Regardless of whether the user clicks in the info tab, makes a change to
equipment or starts by editing the profile (i.e., clicking on the little
penguin), we should get into the same state and behave the same way.
This means that when editing a manually added dive we are always in
editMode == MANUALLY_ADDED_DIVE - and editMode == DIVE means we are
editing a dive that came from another source.
Fixes#379
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch disables/enables the DC device node based on what type of
transport the selected DC uses. The only time the device node field is
used is if the selected DC uses a serial transport type. IrDA and USB type
transports do not use the device node.
Signed-off-by: Benjamin Fogel <nystire@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use QStringList::contains instead of iterating the list.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
MANUALLY_ADDED_DIVE is a different flavor of ADD mode (in both cases we
are in "planner mode"), so bail out for that as well.
See #379
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
QList is optimized for storing pointer-sized items, thus
a QVector is the better choice for everything else.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Thise files dates back from the beginning of the Qt port and
were never used anyway...
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
deleting a null pointer is valid, so we just delete it
instead of checking if it exists.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Code cleanup, don't use if ( thing() ) set false,
but set !thing() instead.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes my last annoyances with dark themes
on subsurface. It changes the background color of the
edited info tab to a darker yellow if the theme is
dark, and a light yellow if the theme is light.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code used a QString instead of a const QString&, wich
mean that each foreach step the string was copied.
added a break on the if-found-true to stop the foreach, since
we already found it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows user to view any file on CSV import dialog, not only the
ones ending with .csv. Of course, the default still shows only the .csv
files and user needs to change the filter to view the rest.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds support for two more GPS coordinate formats and also fixes a
couple of issues with the previous implementation.
We used to only support full degrees and decimal minutes. We now also
support fully decimal and degrees, minutes and decimal seconds.
The previous implementation would color the input field red if either it
couldn't parse the string, or if it was able to parse it but it was the
same as the previous location. That's misleading.
The previous implementation also changed all gps coordinates to the new
coordinates in a multi-dive edit - instead of just changing the ones that
are the same as the master dive.
Fixes#387
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Why calculate the number of entries in the zip downloaded from Divelogs.De
if you don't do anything with that number?
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
None of these are actual bugs. But none of the fixes are harmful, either.
And much as I hate adding the 'default' clauses, I'd rather not have the
build output cluttered by invalid warnings.
The exception is the fix in divelistview.cpp - while I don't think it is
possible for this function to be called with no dive selected,
initializing pd to NULL is cheap insurance in case that does happen for
some weird reason.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Keys up and down to increase / decrease stars
and also fixed focus policy for it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't need to keep the array of zip_source structs. We just need the
latest we created so we can add to the zip file.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is so we can mark the error messages for translation.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a cleaner approach, according to the discussion in the mailing
list. It is also better because we can use QTemporaryDir in Qt 5.
Finally, it avoids having to remember to free it at every point.s
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And make them use UTF-8 on Windows instead of the local 8 bit encoding.
This will also get us the proper NFD encoding on OS X.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The fix for dereferencing a null pointer from me was a bad fix that
broke the possibility of saving a planned dive as a dive.
This is a better fix to not dereference a null pointer and be able to
save the plan again.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When saving / canceling the edition, focus was still being kept on the
current selected widget. not good. :) this patch makes the DiveList
keep the focus after a edit.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The problem was the Focus Prevention system on the
EventFilter. Instead of that we can pass the setFocusPolicy (
strongFocus ) that ignores the mousewheel. simpler and cleaner.
Fixes#376
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was some options on the 'if' that didn't
really belonged there, so I create a if before those
to quit earlier if the condition is true.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should be somewhat faster, and the code is cleaner.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The QPainter::hightQualityAntiAliasing is ignored by Qt,
the docs says we should use QPainter::AntiAliasing.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The color used on the bright theme was cyan, and it's too bright when the
font is also white.
This patch uses the HSL information of the color to determine if the text
color is light or dark, and adjusting the background color for that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We may want to use toUtf8() for win32 considerations.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Unhide menu is only shown when hidden events exist.
Also updates relavent manual section.
Signed-off-by: Tim Wootton <tim@tee-jay.demon.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were asking the widget.font() which returned the font that the
QFontSelector uses to display it's contents, instead of using
currentFont() that's the correctly selected font. duh. :))
Fixes#368Fixes#375
(for #375 the solution is to select a different font that a) looks better
and b) has the missing characters)
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is not the ideal solution. Ideally we might want to simply enter the
profile edit mode if we edit a dive that was manually added. But right now
the code contains lots of assumptions about being in one mode or the other
and as we are redoing the profile / planner classes for 4.1 anyway, I'd
rather err on the safe side for 4.0.1
Fixes#374
(well, it fixes the second bug reported in 374 which is quite different
from the original bug)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user edits a dive and then quits we try to ask them to finish
editing, first. If the user did this by either clicking the little 'x'
in the window decoration or by hitting Alt-F4 (or similar), we didn't
have that question (only the 'save changes' question in case the dive list
had already been modified.
Fixes#374
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We appear to be missing the correct dll. I'm out of time trying to track
this down, so I just switched Subsurface to access divelogs.de via http on
Windwos.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previously we would overwrite the gasmix as well as start and end
pressure even when editing multiple dives, which clearly is wrong.
Fixes#364
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This gets the behavior close to what we really want.
- scroll wheel no longer enters edit mode when over the tabWidget
- scroll wheel doesn't modify dateTimeEdit, nor does it enter edit mode
- scroll wheel still scrolls both the notes and the full widget
The only oddity is that when clicking on either the dateTimeEdit or the
tabWidget we don't immediately turn on the 'being edited' warning (as we
do for all the other widgets). For those two widgets the user has to press
a key before edit mode starts.
I think this Fixes#176
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Ideas-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When toggling autogroup in the menu we ended up setting the NO_TRIP flag
for dives that were removed from a trip that was created by autogroup. So
toggling things on and off and on again meant no more auto grouping.
Fixes#337
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user had never set up the language selection they could end up
getting the "language changed, restart required" warning even if they
didn't touch the language setting at all.
This fixes that issue by assuming that UseSystemLanguage is true if the
setting is undefined and only comparing the selected language if that
selection actually matters (i.e., UseSystemLanguage is false).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The open call will tell us what we need to know. Obviously we can't open
a file that doesn't exist. This saves us one stat() or Windows
equivalent.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Casting a pointer to a size_t variable to a pointer to int is wrong on
big endian machines. Not that I expect anyone to compile Subsurface 4
for Mac on PowerPC 64-bit, but just in case... Who knows, we may have
some Solaris-on-UltraSPARC or AIX-on-POWER6 users.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't need to get it for every file, since it's the same. This also
avoids leaking temporary files and memory if the stylesheet cannot be
found.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
No need to allocate memory for something that will show in debugging
only. Besides, qDebug() of a QString adds quotes around it, which we
can do without.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Older libzip lack zip_get_num_entries. Thanks to Lubomir for spotting
the version macro.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Save and restore scrollbar position on editing the dives.
I think this is not the best place for it, but I'll leave
it here for a while untill I find a better place.
Fixes: #343
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes sure that the minimum time / depth is
correctly set on the profile planner.
Fixes: #358
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the same code that Dirk used on the Mac to fix the
bad-behavior of Cylinder Selection, this time applyed to
Weigthsystem selection.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch uses the class created by the previous patch
to get rid of the CSS and be really desktop native. it
fixes a lot of stuff in non-blue-styles and throws
a lot of code away. <3
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The css was done by me in the first days of subsurface for Qt, and it
was a code that I was never proud of. Mostly because I tougth at the
time that it was better to write it into CSS than to create a new class
just to take care of the size of the default cell height on a tree view.
Now I see that it was a biased approach since it created issues on
dark color schemes and it also didn't make a 'native' experience on
Gnome or OSX, only on KDE.
This fixes that.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The forward declaration of 'struct device_data_t' is not
needed as it already comes from '../libdivecomputer.h'.
Reported by the program cppcheck.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
ProfileGraphicsView::plot_depth_profile():
The iterator limit check (i < 7) should precede the indexing
(increments[i]).
Reported by the program cppcheck.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Introduce some harness in ProfileGraphicsView::plot_one_event, so we
detect bad stuff and bail, instead of dereferencing undef pointers.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
prepare_dives_for_divelogs() did a silly thing, which I was
responsible for. When populating 'tempfile' we benefit
from QString, but then return a pointer to a local variable
(char *) without alocating it on the heap. This resulted
in undefined behavior, as we don't know the lifespan of that
local memory on the stack.
Patch fixes that by using strdup() and freeing the memory
when/if needed.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When trying to remember a newly manually created dive across the
sort_table() call I abused the dive->selected flag and didn't clear it out
afterwards (most likely thinking "hey, I'm calling selectDive() on this
anyway").
This caused the UI code to correctly mark the dive as selected, but when
it called down to the C code to keep the internal data structures in sync,
that code didn't update amount_selected as it thought this dive had
already been selected. And that caused other parts of the code to get
confused, which manifested for example in the failed upload to
divelogs.de.
So this clears out the flag after abusing it to remember a dive. Maybe we
should add a 'remembered' flag instead, but for now this fixes the issue.
Fixes#351
Initial-fix-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We use the same dialog for both the Subsurface WS and for the
divelogs.de one. Instead of the old title (which suggests download)
we can use a more generic one - "Webservice Connection"
This makes it easy for us to maintain a dialog that can both
upload and download data, while the dialog title is descriptive
enough.
Fixes#352
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If rowCount() is 0 we get an assert:
ASSERT: "last >= first" in file kernel/qabstractitemmodel.cpp...
To solve that we wrap the beginRemoveRows() call in a bnrach:
if (rowCount() > 0) {
...
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Clang yelled about it, and it looks prettier. It also felt kinda strange
to explicit initialize the first element to zero and the rest to zero
implicit.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Initialize diveplan.dp to NULL, so we know that we will bail in
drawProfile, when the initial settingsChanged is fired.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Give user the possibility to re-enter username and password
after unsuccessful upload due to wrong credentials.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Initialize stagingDive to NULL, so we know that we will bail in
createTemporaryPlan, when the initial settingsChanged is fired.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At least username and password have to follow each other.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Post downloading we have an 'Apply' button that can be clicked
to apply/merge the downloaded dives. When uploading we
rename the button to 'Done' and enable the button if the
upload was successful. The 'Cancel' button on the other hand
becomes disabled.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use qDebug() instead of fprintf(stderr, ...) in
prepare_dives_for_divelogs().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The correct way to stop the upload/download is to use
reply->abort(). If the dialog closes, post exec()
we check if the reply 'isOpen' and abort and delete it.
Without this modification the program seems to crash
as the connection is still in action and it attempts
to read an already deleted file.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We store the user/pass for 'Apply' when downloading, but
we also want to store these values for 'Upload'.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Only show a filename in the error report if such was previsly
set. We also add a string for translation, that is shown
in the main window.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The 'Content-Disposition' header, requires that we pass
'name' but also a 'filename' field.
Suggested-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
prepare_dives_for_divelogs() is based on GTK / C code
where we used GLib methods to generate a temp zip file.
Qt has QTemporaryFile, but it seems there is some sort
of a problem when using with with zip_open
(ZIP_CREATE considered) or at least in this particular case.
To workaround that, we generate a random name ourself with qrand()
and simply pass it to zip_open (with ZIP_CREATE) and then return
the filename.
Also (!), there is memory corruption when trying to return
'tempfile'. This wasn't the case with the C compiler,
to my knowledge. Regardless of this fact the generated
zip does not look corrupt.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
prepare_dives_for_divelogs() comes from the GTK version, originally.
The upload seems to fail at this point with an error.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This patch adds commands to the dialog buttons, to apply
(and possibly show an error if 'parse_file' fails',
reject, or show help - which is a link to the 'divelogs.de'
website.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This is so we can default to the GF's from the preferences. We need the
bail handler in createTemporaryPlan, because its triggered when we
change GF's, and if we don't have a stagingDive there, we will access a
NULL-pointer.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When got auto-rescaling of the depth scale, always reset the depth scale
to what the profile would suggest. This introduces a concept of user
requested minimum witch we will update and not scale down to lower than.
Reported-by: Henrik Brautaset Aronsen <henrik@synth.no>
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When switching between metric and imperial, we should also show that the
different units are switching too. This signals the greyed out
radio buttons to switch to the right system.
Fixes#347
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The groupBox-es got renamed, and thus the unit-systems radio-buttons
was enabling/disabling the wrong buttons.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we start to define a gas, we should use that one by default instead
of air.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Silly mistake in commit 93b5c0cd14 ("Finish download from divelogs.de"):
parse_file() doesn't call process_dives() - the caller needs to do that.
Fixes#344
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When removing the selected dives from their trips, it makes no sense to
check if the pointer was actually pointing at a valid dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On Windows platform translation/ folder contains Qt translation
files as well. This results in extra languages in preferences.
From now we filter these translations and choose only those matching
^subsurface_*.qm$
Fixes#339
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Show language instead of country, sort the list.
Show country in brackets to avoid ambiguity for locales like
de_DE and de_CH.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Left to do is to remove all the auto-added deco-points, aka the ones
that had entered==FALSE before we created a dive from the plan.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It previously always started with o2 in air, now we start with 0 as its
the same default as in the cylinders too, which fixes a uninitialized
index there too.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the scale is too big or too small, adapt the scale automatically.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
otherwise the previous selected dive is still visible in the profile
view. clicking on edit crashs subsurface: null pointer dereference in
editCurrentDive as it uses 'current_dive' which is null.
Signed-off-by: Martin Gysel <me@bearsh.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use proper case and subscripts for gas names on profile legend.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Telling Qt that the "Preferences" menu entry is
QAction::PreferencesRole will make it be moved to the System menu on
Mac, for example.
Fixes#327
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is far from perfect.
Avoid a weird warning when total = -1 is passed into the progress bar.
Enable the Accept button once the download completes.
Merge the downloaded dives into the existing dive list on Apply.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt has a really strange API for directories. when you create a QDir
and set's the currentDir on *that* QDir you created, it's for the
whole application and not just for that variable. Then when the
variable is out of scope, the directory doesn't change back - ugh.
The solution is not to call setCurrentDir on the newly created QDir (which
was quite good since it's also a code cleanup. )
[Dirk Hohndel: modified to undo the far less elegant fix I had made in an
earlier commit]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
These complete the ability to select languages from the preferences panel.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a filter option to the Language Chooser.
if you choose filter, only the filtered options will appear.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The code that should set the preferences was actually retrieving it,
this will correctly set it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When the user first opens the application the default language is
selected; this can be changed to a hardcoded one by going to system
preferences and choosing the one you want.
Restart required.
Fixes#136
[Dirk Hohndel: whitespace fixes, removed qDebug() call, rephrased the
message displayed prompting the user to restart.]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We do not support rows larger than a single page as the
PrintLayout algorithm will enter an infinite loop,
therefore we put a limit of 15 lines for the location text.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch improves the algorithm when estimating where
to put the new page header in the table and how we move
larger dive rows on a new page. It now performs a couple of
'passes', where the first one processes the table and the
second one is used to compensate for the lost space.
Fixes#326
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
setTitle() works with an enum that can be fed different values,
and other we may have eventually. For example not only "app title",
or "app title: filename", but others, like dates, certain app status
and so on.
Patch fixes an issue where deleting a single dive in the divelist
resets the title to "Subsurface" only. clearUpEmpty() should only
call setTitle(MWTF_DEFAULT) if no file is currently open.
It also adds a safe-guard to revert back to MWTF_DEFAULT if
no file is open but setTitle is called with MWTF_FILENAME.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The whole procedure here is quite confusing.
Once we have our model populated, we need to estimate where
to put page headers (each page has one) and to do that we
store a list of indexes, where a page would begin (pageIndexes).
But since a row can end up being chopped at the end of a page
we move it to a new page and this particular part was lacking
compensation for the moved row's height, when storing the *last*
pageIndex.
For N number of pages we are losing N - 1 dives, or such that
were previously transferred on a new page.
See #326
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a different icon for a Bookmark Event, and it
also cleaned a lot of code. :)
See #300
[Dirk Hohndel: made the two icons slightly bigger]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes a better assumption of the location for the
legend in both View and Print modes. It also fixes a few oddities
that we used to have ( like hardcoded spacing ).
We are taking the scene().sceneRect() now into consideration to
better place it on canvas.
Fixes: #322
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I can't really see any point in passing a local loop variable around,
and copying a uninitialized pointer. Better use local variables there
and let the compiler optimize them away if it feels for doing that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sets the limit for GF's in the preferences panel to 1<=x<=150 and color
it read if gf > 100. Remove the % in the diveplanner view that was
rejected for the preferences view.
The 150 maximum is needed because QSpinBox defaults to maximum 99.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The separator selector in the CSV import dialog was unused. This passes
the value into the xslt and adds ',' as possible value.
I'm sure this could be done much better (pass the actual character instead
of the index), but I couldn't get that to work and this does seem to do
the trick.
Also added a test dive to test this feature.
Fixes#321
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This backs off a little on what was added in commit c1102a38f3 ("More
gradient on the partial pressure graph.") - the numbers simply got too
busy. I also slightly changed the positioning of the numbers to be a
little more "natural looking".
Fixes#323
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The layout of Subsurface on Gnome 3 had a few flaws, since Qt and Gtk
are not really compatible. This implements a CSS that makes the use
of Gnome 3 more pleasant to the eyes.
Fixes#318
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Hitting apply in the preferences dialog causes a QList assert.
This led to DiveListView::reloadHeaderActions(), where
we have an out of range access.
Patch makes the column count match the header action count.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the PrintLayout constructor we receive a pointer
of PrintDialog, but the type is incomplete, as we only
forward declare it in the class header. If we decide
to eventually call a method from PrintDialog we also
need to include printdialog.h in printlayout.cpp.
The patch also fixes a similar issue in printdialog.h.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
printTable() now emits a 'signalProgress'
to the PrintDialog's progress bar, but it has 3 stages (loops):
- pupulate a model
- process all rows
- render the table in pages
This requires that we also separate the progress in 3 stages
of 33%.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
estimateTotalDives() is used to calculate the total dives
to be printed, it requires a 'struct dive' pointer
and a couple of 'int' pointers for the iterator 'i' and
'total' return.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The dialog was missing a 'Close' button so we add it.
Also change the mnemonic of the 'Preview' button, as it
was the same as the one for print 'Print'.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
I don't recall why but this dialog ended with a fixed size
(setFixedSize()), so it has to be re-adjusted each time a change
is made in there. We resize it to compensate for the addition
of the progress bar.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We rename our old 'Print' button to 'Preview' (as it did just that),
and add a new one called 'Print' which does the direct printing,
by creating a QPrintDialog instance. Both buttons are located
on top of the dialog for now in a QHBoxLayout.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
The entire dialog is 'temporary' and should be replaced,
so we slightly modify the comment about the PrintOptions widget.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
This dialog will be eventually replaced by a better one, but
for now we can add a progress bar to it. Next step would be to
add separate Print/Preview buttons and emit progress bar updates
from the PrintLayout class.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
We don't want to add the last sample - the dive plan functions want to
figure out the path to the surface by themselves and get confused by this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch attempts to fix the 'click goes to 0,0' bug on the
globe. it moves a bit of code around and I particulary don't
like the way that we are dealing with 'EditMode', I think I'll
refactor that for 4.1. We are alredy dealing with a bunch
of states, maybe a State Machine will help on removing code-complexity.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Selects the newly added dive after adding it, it uses a
rather ugly hack that forced a unselected dive to be
marked as 'selected' so we can remember what was the
newly added dive, and select it after.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
NDL and TTS doesn't show up in the printed profiles, and it takes
significant time to calculate, so just don't do it.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This implements support for:
* uploading a zip file containing dives - untested
(the zip file must have been prepared elsewhere)
* downloading the dive list and the dive XML files
The networking part is finished, but it's missing the actual import of
the XML files sent by divelogs.de.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
The time out is 30 seconds from the start of the request or from the
last time we got any data from the server.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
QNetworkReply might emit signals after it's been told to go away. We
don't want to change the status after that.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Re-enable buttons that should be enabled by default, disable the others,
set the status to empty, make the progress bar go back to zero.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Just my OCD asserting itself. It looks cleaner this way, if the static
functions aren't interleaved in the middle of the WebServices class.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
One of the rules of using QNetworkAccessManager is to share it among all
users, since sockets and other state can be shared. Looks like Marble
doesn't allow us to set it, though, and it creates multiple instances.
I'll prepare an upstream patch to fix that sometime.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
An addition to the "Move dive notes edit message above the
scrollable widget" commit: Make sure the save/cancel message is
always displayed on top, regardless of which tab is selected.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Removed the "Visible:" header on the column selector. It doesn't
have to be there, and it's not in the similar equipment column selector
- PO2 --> pO₂ (and others)
- Use same initial case in the units selector in preferences
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds legend for the partial gass pressures if the
graphs are active. when enabling / disabling the square
that represents the color of a gas will also appear / disappear.
Fixes: #272
[Dirk Hohndel: minor changes to layout and whitespace]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "Save" and "Cancel" buttons disappeared when scrolling to the
bottom of the notes widget.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the 'mouseClicked' didn't get any dives at the click-geolocation,
ignore it and do not try to select an empty selection. this was
causing a lot of issues when map-navigation.
Also, good deal of code cleanup.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
commit 3c064d5857 ("Make the message when editing a dive fit better")
kinda fixed the wrong problem. A better solution was suggested - just drop
the instructions regarding Cancel / Safe. It's quite obvious what to do
mow that the buttons are part of the message.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
For the names that we have in our "default set" we need to store the
English name so Subsurface will "do the right thing" when opening the file
in a different locale.
With manually entered names in a local language there's not much we can
do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This piece of code didn't need to be on the for-loop, so
let's remove it out of it.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code ( slow++ ) ignored that each new dive-selection
we recreated all information on the profile window, so this
version ( a lot more verbose, I know. ) will ignore all dives
that are being selected and will only send the 'dive was selected'
information in the last line of the algorithm, instead of calling
it for each dive on the list of 'to be selected' dives.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Still trying to fix the same issue that I already tried to address in
commit e0b70b82ca ("Fix translation of weightsystem names") and before
in commit dc03b7e7d6 ("We need the correct context to translate event
names").
I missed the WeightModel. Hopefully this was indeed the real fix.
Fixes#312
(I know, I keep saying that)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should keep the message widget visible without horizontal scroll bar,
even on fairly small screens.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The button box on the bottom of the window made it a bit cluttered
on small screens, this patch uses the window of the MessageWidget
to show the butons - this way less space is used and things are better
spaced on screen.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a context menu to set the dive location
via the globe, being the dive with a coordinate or not.
It also fixes setting the dive location on edit mode.
Fixes: #315
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We add the "maximized" entry for the settings group "MainWindow",
and store it on close, so that the window state is the same on
the next run. But then also, we only store the window size and resize
to that size if not maximized. This attempts to preserve a "restored"
window size.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is very much the same as in commit dc03b7e7d6 ("We need the correct
context to translate event names"). I didn't pay enough attention when
reading the bug report and missed that the weight system names were also
not correctly translated.
Fixes#312
(I hope this time for real)
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing air or water temperature, you are actually editing the
information in the active divecomputer structure. But the Dive Info shows
the summary data created from the temperature data in all dive computers.
For most people who will only ever have one divecomputer per dive this may
seem like an artificial distinction, but it's very important if you track
more than one computer.
So in order to have an edit reflected in what's shown, we must redo the
"summary creation" for data from the different divecomputers into the
summary fields of the dive.
Fixes#313
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Qt assumes that all strings are in the context of the class in which you
use them. So when we want to display the translated event names from
within the ProfileGraphicsView we need to make it explicit that these are
strings that come from the C part of the code.
Doing that showed another bug in the code where we foolishly compared the
translated text to a fixed string. Not smart.
Fixes#312
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Subsurface creates a lot of singleton instances on demand, but nothing
ever deleted them. Since they are singletons, these memory allocations
are technically not leaks. However, they clutter the output in valgrind
and other memory analysers, hiding the real issues.
The solution is to delete these items at exit. For the models and for
gettextFromC, the solution is to use a QScopedPointer, which will delete
its payload when it gets destroyed. For the dialogs and other widgets,
we can't do that: they need to be deleted before QApplication exits, so
we just set the parent in all of them to the main window.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Found by Dr. Memory, run by Lubomir:
Error #48: UNINITIALIZED READ: reading register al
# 0 StarWidget::mouseReleaseEvent() [qt-ui/starwidget.cpp:29]
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- Hide the sizeing sliders from PrintOptions. we don't really
support any of those in PrintLayout and these are not that
useful and easy to implement, until some sort
of layouting/templating system is in place.
- Move the 'Print' button on top as a workaround, since if
it's bellow the print options it stays bellow an empty area
where the now hidden sizing sliders are.
- Resize the dialog to a smaller size
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Make it consistent with other application dialogs.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The translatable string in about dialog is truncated at the
VERSION_STRING. Thus it has to be given as argument to the tr function.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When there are no trips at all, we have to skip the Yearly statistics
alltogether, including the header line (that should display all the
dives added together).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We now only use a slightly large font for the "Dive #" entry.
All other font sizes remain at 9px.
Another change is that we now attempt to use 11px for
individual row height. This makes the table at least 12px bigger
(n_rows * increment), but does not cut letters like 'g',
which go slightly bellow the font baseline.
Perhaps this can be improved later by adjusting the font
and row sizes again.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
nr was used but never initialized.
Also, the code removed used select_dive had likely just been forgotten to
be removed when the correct code using selectDive() was added a little
later in the function.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
c++ have some idea about in what order things should be initialized.
This makes us comply with that order.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use the same case for the first letter in the dive table column headers,
use '%' for both gases in the planner, and show "Start time" instead of
"Starttime".
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The "air / water Temperatures" label didn't look to good.
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We update the values for divemaster, buddy and etc...
Rating and visibility are currently displayed as "x / 5"
values.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Following the new layout for the profile print, we separate
the used gas like so:
AL80 / EAN33 / ...
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
There is not enough space for the last column in "6 print"
even for the english text. This gives more space extending
the row, but for some languages it will be an issue, thus
strings have to be eventually shortened by the translators.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
ProfilePrintPmode::truncateString() was not really needed,
because long text *should* be trunctated by the table itself.
Also we now are going to have multiple lines for notes,
so the auto-trim should work.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Since some early bird thought it was a good idea to force the rest of us
to get up early by changing our clocks during summer, we can not use the
currentDateTime() to determine the timezone offset for all dives.
Instead, we just pretend that everything is in UTC and avoid doing the
offset calculations.
If only that early bird knew that if clocks stayed consistent throughout
the year then I could be asleep instead of fixing this in the middle of
the night..
Signed-off-by: Michael Andreen <harv@ruin.nu>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply clear the edited dive (regardless of whether it's set) and hide the
message if visible. The previous code was a little too convoluted...
Fixes#305
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need the marble data to go into a subdirectory of /usr/share/subsurface
and we need to search for both data and marbledata when trying to find the
theme.
Fixes#310
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'll admit that I don't fully understand this part of Qt.
But commenting out the deleteLater (like we already do for another one)
fixes the crash - and shouldn't do more than add a potential small memory
leak.
Fixes#309
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
'Show' verb is already shown in the groupbox title and no other
labels have it.
Signed-off-by: Sergey Starosek <sergey.starosek@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes ToolTip Item showing out of boundaries
Tooltips when in resizing animation.
Fixes#294
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch makes it possible to hide some columns on the Cylinders
Equipment pane. The 'remove' and 'type' are impossible to hide,
since they are the most important ones for a non-tech diver.
Fixes#281
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch adds a bit more of gradient on the lines for the partal
pressure graph grid, it also moves a tiny bit to the side the
even numbers so it's easyer to read when they are too near each other.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous show and save code would have aborted at the first invalid
weight system. This makes sure we save and show all weight systems up
until and including the last valid.
If we had:
integrated: 1kg
belt: 2kg
ankle: 3kg
And changed belt to 0 kg, we would have only saved integrated 1kg, and
nothing about the belt or the ankle weights. This will save all of them,
and show all of them.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Previous code aborted at the first invalid cylinder. This instead finds
the last valid and prints all the ones up until that one.
Fixes#295
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing a dive, a group of dives or a trip we need to make sure that
we don't lose track of which dives and trips were selected. Otherwise we
might act on dives that DON'T appear selected in the UI but that we think
are still selected.
Fixes#304
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We have allot of helpers, use them instead of local variants.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since all internal units are in mm we needed to only update what's shown
on the interface.
Fixes#299
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a workaround, I plan to remove that toolbar from inside
of the Profile for the next version, but since it's there for now,
let's keep it.
This patch hides the toolbar when the zoomLevel != 0, since the
profile is unclickable while zoomed...
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch remembers the trip selection across the Dive Tree Model.
It's a tiny bit big because we used to have a variable 'selected
trips' that's now calculed dynamically - this is more future proof.
This is a start of Un-cluttering the view ( for 4.1 I hope to reduce the
code in this class to nearly a half. )
Fixes#303
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When resizing the ProfileWindow and the tooltip was out of
boundaries, it was really out of boundaries and there was
no way to get it back ( besides re-expanding the window. )
this patch moves the tooltip to (0,0) and don't save that
position, so when the window is re-expanded, it will move to
the correct location again
Fixes#237
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The fix for 'double click on the map shouldn't zoom' had broken the
selection of the current location for the selected dive, this patch
fixes that.
See #291
Signed-off-by: Vinicius Machado <vsmachado@gmail.com>
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds trip based statistics to the Yearly Statistics
view.
Signed-off-by: Miika Turkia <miika.turkia@nixu.fi>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With this every cylinder downloaded from a divecomputer that doesn't
provide cylinder data, and every cylinder manually added anywhere will
default to the default cylinder that is set in the preferences.
For people who most of the time dive with the same equipment (always on
dive boats with AL80, or almost always diving their personal HP119) this
should be a nice improvement.
If you don't like this behavior, simply leave the default cylinder setting
in the preferences empty.
This commit also fixes the incorrect s->value call (should be
s->setValue). I wonder what this did to the default filename before...
Fixes#145
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't do anything with this just yet.
And frankly, a drop down of the cylinders that we know of would be even
better. But hey, it's a start.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When editing a dive and clicking save button on menu bar, it saved
dive information but didn't mark dive as not being edited anymore.
For closing file, user should always click on the save button on
the bottom of the page and then saving it.
Now when clicking save button on menu bar, it will call the
accept_changes before saving to disk.
Signed-off-by: exhora <exhora.tat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Actually, it's not so much "work around", it's just "disable our eye candy" for
tags on Mac. This is quite frustrating. When we do anything that has the
QPainter touch the widget from our GroupedLineEdit::paintEvent() path then the
QPlainTextEdit::paintEvent() doesn't render the text of the tags.
Fixes#298
Sort of.
But I guess tag text without eye candy is better than eye candy without tag text.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Later we spacifically enable the scale, but Dirk asked me to
use the bare minimum of marble.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Marble is a weird piece of Qt software, it seems that it wasn't
thought of being a library when first written. Most of its features
are not achieved by subclassing && overriding one of Qt default methods,
instead we need to eventFilter for almost everything ( which is a pain,
and a bit error prone - see our combo box delegate *puke*. )
This one's ready, only one thing though - if we want to implement
our own context menu, we will need to use the eventFilter, and not
the contextMenuEvent.
Fixes#291
[Dirk Hohndel: this does not disable the context menu for me...]
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A user could have hiddden and lost any of the four panels
on the interface. Now when he chooses 'show all', if a
part of the interface is hidden, it will be shown again.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I think we should actually fill the app with tooltips and
whatsthis hints. justsain ;p
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Better positioning of the text on the table cells. On KDE systems the
text got too near the line that divided the cells, this way the text is
placed on the middle of the cell.
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch fixes the correct sizes of the tables when first opened. It was
defaulting to 'resizeToContents', but most of the cases when first opened
we got no content, and this was bad. Now I'm defaulting to 30 when on the
'REMOVE' column and 80 on other columns.
Fixes#189
Signed-off-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When a gaschange to air happened, the code did
name += name=+ tr("air") which probably was due to the block being just
confusing with all the ?:
Unrolls to proper if statements, and fixes the bug.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a checkbox to be able to import csv files without temperature.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This rewires things a bit to make room for new features coming.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Before, when clicking the OK button on the preferences GUI, we were
updating in-memory preferences from the GUI, saving them to the
configuration file from the GUI, reloading from the file to the
in-memory preferences. Then, to add to the ducplication, when the
application was exiting, some fields were saved again.
Basically the first step and the last step were useless appart from
the fact the the other steps where missing a few fields here and there.
This patch removes the first step and fixes the missing fields.
Signed-off-by: Patrick Valsecchi <patrick@thus.ch>
ACKed-by: Tomaz Canabrava <tcanabrava@kde.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
