When connecting a model to the TableModel class, it would connect
clicking on an item to the remove() slot of the model.
This breaks the program flow implied by the undo code:
Ui --> Undo-Command --> Model --> UI
Moreover, the naming of the remove() slot is illogical, because
clicks can also have different effects, as for example in the
cylinder-table.
Therefore, move the connect() call from TableModel to the
callers. In the case of TabDiveSite, move the remove() function
from the model to the TabWidget, where it makes more sense.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When in dive site tab and some dive sites are selected, show only
dives at those sites. Simply read the selection and pass it to the
filter.
Start and stop filtering when switching to and from the tab,
respectively.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Merging dive sites is currently only possible if dive sites are at
the exact same position.
Introduce a field where the user can enter a distance up to which all
dive sites should be listed. These can then be merged.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is a bit more tricky. There are two modes: set dive site
and set newly created dive site. This is realized using an OO model
with derived classed. Quite convoluted - but it seems to work.
Moreover, editing a dive site is not simply setting a value,
but the list of dives in a dive site has to be kept up to date.
Finally, we have to inform the dive site list of the changed
number of dives. Therefore add a new signal diveSiteDivesChanged.
To send only one signal per dive site, hook into the undo() and
redo() functions and call the functions of the base class there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add an edit column that calls the new editDiveSite() function
of MainWindow. The calling code is in DiveSiteSortedModel.
Quite illogical, but that's how TableView works, for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Simply copy the code of note editing. It's a bit more complex,
since we have to parse the Gps coordinates. For consitency,
rename the COORD field to LOCATION (the field in the dive_site
struct is called LOCATION).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These were never used and it's hard to imagine when one of these
would be used. Typically users are more interested in the coordinates
than just one component, no?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Simply copy the code of notes editing, but use the taxonomy_* functions
to read and set the value. Moreover, replace the three TAXONOMY_n field
ids by a single TAXONOMY id. We will probably never show one column per
taxonomy field, but rather a single column with a string derived from all
taxonomy fields.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There was a way of deleting dive sites by clearing all fields.
This is not necessary anymore, as now the user can delete a
dive site in the dive site list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement an undo command that edits the name of a dive site.
Connect it to the dive site table, so that names can be edited
directly in the table.
Send signals on undo / redo so that the dive site table and
the dive site edit widget can be updated.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Create a new undo-command for deleting dive sites. If there are dives
associated with that site, the dives will be removed. The frontend
is not yet updated in such a case, as that infrastructure is in a
different PR.
Connect the trashcan icon of the dive site table to the undo command.
Currently, this code is in the dive site model, which makes little
sense, but is how the TableView class works. We might want to change
that when cylinder and weight editing are made undoable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The LocationInformationModel used to sort its entries and was completely
rebuilt after every change. This makes it rather complex to support
incremental changes.
Instead, keep LocationInformationModel sorted by UUID so that indexes
are consistent with indices in the core dive site table.
Implement sorting by other columns than name and enable sorting in the
dive site view.
Finally, don't cache the list of dive site names for the mobile app,
since that would also need some rather convoluted methods of keeping
the list up to date. Calculate it on the fly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Introduce two DiveListNotifier signals which are sent by
the undo commands if dives are added to / removed from the
core.
The signal has the dive site and the index in the global
dive site table as payload. Thus, the model has only to
remove the appropriate rows.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a new signal to DiveListNotifier. Send signal if dives are
added or removed and therefore the dive count of a dive site
changes. The dive sites are collected and the signal is sent
at the end of the command.
Add code to update the table view.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a very simple tab-widget presenting the list of known dive sites.
The table is rendered using our custom "TableView".
The (mis)uses the "LocationInformationModel". It moves the items
to be displayed (delete, name, description, number of dives) to the
front and makes the others hidden.
Moreover, it was necessary to limit the geo-tag decoration role to
the name to avoid having the icon next to each column.
Make the trash-can icon active and the name and description editable.
This is modelled after the cylinders-table code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace UUIDs from LocationInformationModel and fix the fallout.
Notably, replace the UUID "column" by a DIVESITE "column".
Getting pointers through Qt's QVariant is horrible, we'll have
to think about a better solution.
RECENTLY_ADDED_DIVESITE now defines to a special pointer to
struct dive_site (defined as ~0).
This fixes an interesting logic bug:
The old code checked the uuid of the LocationInformationModel (currUuid)
for the value "1", which corresponded to RECENTLY_ADDED_DIVESITE.
If equal, currType would be set to NEW_DIVE_SITE. Later, _currType_
was compared against _RECENTLY_ADDED_DIVESITE_. This would only work
because NEW_DIVE_SITE and RECENTLY_ADDED_DIVESITE both were defined
as 1.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Access to dive-sites in the LocationInformationModel was via UUID.
Replace this by a direct access to the struct dive_site pointer.
Accordingly, rename the UUID_ROLE to DIVESITE_ROLE.
This is a small step in replacing dive-site UUIDs by pointers
throughout the code base.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of having people treat latitude and longitude as separate
things, just add a 'location_t' data structure that contains both.
Almost all cases want to always act on them together.
This is really just prep-work for adding a few more locations that we
track: I want to add a entry/exit location to each dive (independent of
the dive site) because of how the Garmin Descent gives us the
information (and hopefully, some day, other dive computers too).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SsrfFilterSortProxyModel was a thin wrapper around QFilterSortProxyModel,
which was intended as a convenience class to avoid deriving from the
latter. The filter and sort functions were replaced by simple function
pointers.
Unfortunately, by using function-pointers, the whole thing was rather
weak as these functions do not have state. The last user was removed
in ac8dcd7f65b78958587ba025280ed4c529b0b519. Therefore, remove the
whole class.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The location information shows a list of dive sites at the
same location as the edited dive site. This was done by passing
a function to an "SsrfSortFilterProxyModel". Unfortunately,
the latter does only support function pointers without state
and therefore had to access the global "displayed_dive_site"
object.
Replace the SsrfSortFilterProxyModel by a proper subclass of
QSortFilterProxyModel that contains information on the position
and id of the currently edited dive site.
Update the filter model if the location of the dive site changes.
This introduces a behavioral change: editing the GPS location
will lead to an updated list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For increased maintainability, use the same columns, roles and
the same accessor function for both dive-site models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The LocationInformationModel added two dummy sites to the front
of the list (add new dive site). This was never used - desktop
uses its own model, mobile only extracts the list of dive site
names with a custom function. Remove this functionality.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Editing of dive sites does not work via this model and the function
was broken anyway (it didn't subtract 2 from the index).
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
See also e6e1473e6. The construction of the locationlist
was not the same as the 3 previous lists, and it needs
the inclusion of a new model file (divelocationmodel.cpp)
in the mobile app. In addition, as the mobile app is mainly
interested in a simple stringList (model) to populate a HintsText
field (or maybe later a combobox), this stringlist is added
to the model, to easy interfacing with QML.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Having subsurface-core as a directory name really messes with
autocomplete and is obviously redundant. Simmilarly, qt-mobile caused an
autocomplete conflict and also was inconsistent with the desktop-widget
name for the directory containing the "other" UI.
And while cleaning up the resulting change in the path name for include
files, I decided to clean up those even more to make them consistent
overall.
This could have been handled in more commits, but since this requires a
make clean before the build, it seemed more sensible to do it all in one.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is in the context of the iOS port and shouldn't impact any of the
other builds.
[Dirk Hohndel: refactored the iOS patches]
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Get the Qt data structures and convert to something
that we can use in our C - core.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So we can merge them later - currently we are showing
only the ID, ugly - fixing next.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should be userfull to show dive sites that are
mergeable.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user clicks on the first or second option of the drop
down list, subsurface will move him to the dive site edit panel
automatically, since it's a new dive site and there's no information
about it yet.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having random uuids seemed like a good idea, but there are several
situations where they really cause problems. One is merging dive file
imports from V2 logfiles. Another is testing such imports.
Instead of making the uuid random we now hash the name and add the
timestamp of the first dive associated with this dive site to the hash
(first in this context is "first encountered" with no guarantee that it is
the chronologically first). This way V2 imports create deterministic uuids
but uuid conflicts are still extremely unlikely, even if the user has
multiple dive sites with the same name.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All of dive site information is now exposed to the model
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simple model that list the options for GeoRef.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
So, there's only one crash left (that I put a big TODO: on the maintab.cpp
about) and I'll fix it tomorrow as it's quite late here and I'm almost
sleeping at the keyboard.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Correctly change and update the dive_site, updating the name on the
combobox or other attached views.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Also reorganized a bit of the code, and renamed a few misleading methods.
[Dirk Hohndel: remove some C++11 code]
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When changing the index of the combobox we were discarting the
dive_site_id. This fixes it.
Now I need to understand what's happening to the globe.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch updates the DiveLocationModel when the
GeoLoockupInformationThread finishes, and also selects
the correct index for the displayed dive.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I forgot about this one, and we are going to use it
in the mobile version too.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
