The current dc global makes no sense on mobile. Therefore,
move the logic of the currently displayed dive computer
to the profile widget and remove the dc_number global
variable.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The signals/slot names for dive selection changes were a mess.
Unify on divesSelected(). Firstly, selectionChanged() is a Qt
thing. Secondly, it is consistent with tripSelected().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In DiveListView user actions (select-all, key-press,
mouse-release) were intercepted to send the selection-changed
signal if the selection changed.
However, with the recent cleanups, this can be done
directly from selectionChanged(), since in all cases (at
least the ones I tested), the part of the function that
is responsible for manual selection changes is called
only once.
This avoids quite some complex code flow.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When manually selecting a trip, the selectionChanged()
virtual function was manually selecting the dives of the
trip and thus ultimately recurse into itself.
So far this seems to work OK, but better to avoid this
recursion by setting the programmaticalSelectionChange
flag.
I'd like to send the selection-changed signal directly
from selectionChanged() and this recursion would lead
to double signals.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The trip selection code was an awkward layering violation.
Whereas dive selections due to dive undo-commands trickled
down via DiveTripModel-->MultiFilterSortModel-->DiveListView,
for trip editing, the DiveListView directly intercepted the
TripEdited signal.
Instead, mimic the dive-selection code. This is a bit longer
but more consistent and logical. The undo/redo of trip changes
is now also a "programmatical" change of the selection.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
After sending a selection-change signal, there follows a current
dive changed signal. Combine these two into a single signal, since
usually the current dive is changed when the selection is changed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Each of these calls recalculates the current dive and divecomputer.
Instead, collect the dives to be selected/deselected and (de)select
them at once.
This needs some code refactoring in the core, because we need a
function that
1) doesn't send a signal by itself.
2) doesn't clear the trip-selection.
This contains some reorganization of the selection functions
signatures: The filter code is the only caller that keeps the
selected dive and the only caller that cares about whether the
current dive changed. So let only the function that keeps the
selected dive return whether the current dive changed.
It's all very fragile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Users report that the ShiftTimesDialog does not work on Mac and
Windows. Apparently, get_first_selected_dive returns NULL, which
should not be possible because the dialog is only created when
dives are selected. Very omninous.
Get the selected dives in the caller and pass them down. This
bug at least should not happen anylonger. Perhaps now the
dialog does not show at all, but that will narrow down the
root cause of the problem.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When there is no map support, selection of dive sites is suppressed.
There is no point in calculating the selected dive sites in this case.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Making this simply depend on Qt5 or Qt6 was short-sighted as work on QtLocation
upstream continues. Instead break this out as its own option.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To import media files from the web, increas the size of the
dialog box and allow several URLs separated by newlines.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Commit e42fc1a1e9 introduced a
crash condition. Apparently the code attempts to test whether
the clicked-on item is a top-level dive. The "Collapse others"
menu item should not be shown in that case. It does this by
testing "d->divetrip". However, "d" might quite logically be
null if clicking on an unexpanded trip header.
Therefore, check explicitly for the trip header case (which
should show the menu item) and for good measure prevent
the nullpointer access (that should be caught by testing
for trip, but who knows).
Fixes#3301.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add numerus translation lookup for the right-click context menu in the dive
list to show proper singular/plural text.
Fixes#3256
Signed-off-by: Mark Stiebel <mark@aretha.stiebel.me>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the list view two functions were still manually collecting
the selected dives. Use getDiveSelection() there as well.
Careful: that means that the check for dives that are already
outside of a trip now has to be done in the RemoveDivesFromTrip
command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The main window called a function to init the header actions
(i.e. the context menu) of the dive-list. There is no reason why
this shouldn't be done in the constructor of the dive list, since
it only accesses the QSettings, which are available at application
startup. This improves modularity of the code (by a tiny, tiny bit).
Moreover, the initialization function was at the same time the
header-reloading function. That function can now be folded
into the settings-changed function, since that is the only
remaining user.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
So far, the PreferencesDialog emitted a settingsChanged signal.
This meant that models that listened to that signal had to
conditionally compile out the code for mobile or the connection
had to be made in MainWindow.
Instead, introduce a global signal that does this and move
the connects to the listeners to remove inter-dependencies.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Annoyingly, the replacement has only been available since Qt 5.14.
To make the code less messy, implement our own stdToQt conversion helper.
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
getDiveSelection() returns a vector of the selected dives.
Use that instead of looping over the dive table and checking
manually.
This removes a few lines of code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The UI only allowed adding dives to trips above or below the
current dive (and even that is buggy). This is a strange
restriction, since trips are designed to be non-contiguous.
Allow adding dives to any trip using the new trip selection
dialog. The undo-command is already there, so only little
code to write.
This feature was requested on the mailing list.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the dive list we have horrible code, which intercepts all events
to save the selection before/after the event. This was necessary
because we couldn't get Qt's selection data flow under control.
This means intercepting all events that can change the selection.
The page-up, page-down, home and end keys were forgotten. Add these
cases.
Fixes#2957.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is no reason that this dialog is a singleton. Since it is modal,
it can be created on demand. Apart from removing superfluous global state,
this simplifies code, because preparing the widget can now be done in
the constructor instead of overriding the showEvent() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is no reason that this dialog is a singleton. Since it is modal,
it can be created on demand. This simplifies code, because the mode
(selected-only or all-dives) can be set in the constructor.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is a bit hairy, because two things might happen if the
picture has a geo location:
- A dive gets a newly generated dive site set.
- The dive site of a dive is edited.
Therefore the undo command has to store keep track of that.
Oh my.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If we want to make addition of pictures undoable, then create_picture()
must not add directly to the dive. Instead, return the dive to which the
picture should be added and let the caller perform the addition.
This means that the picture-test has to be adapted.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListView had a singleSelectedTrip function that
returns the selected trip if exactly one trip is selected.
This could be very slow if numerous non-trip items were
selected, because all the selection indices were back-
translated by the proxy model.
This could make selection changes very slow, because the
MainTab used said function to determine whether it should
show trip or dive data.. Indeed, with a 3500 dive test log,
when selecting all dives in tree mode, the updating of the
TabWidgets is sped up from 130 ms to 5 ms this commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListView would touch the selection-innards directly.
Let's encapsulate that. Moreover, take care to reset the trip
selection when resetting the core data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To check wether the tab widgets should show the trip view, they called
the selectedTrips() function. The trip view was shown if that contained
only one trip. However, the selectedTrips() function was very slow,
because it has to query to core models.
Change the function to singleSelectedTrip(), which returns a trip
if there is exactly one trip selected. The function returns early
if there is more than one trip selected. This makes the select-all
case much faster.
There are two cases which are still very slow:
- List mode, because here all top-level items are queried.
- Dive log with many only top-level items.
Ultimately, we will have to cache the trip selection because
querying the model is too slow.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old code would call QItemSelectionModel::select() once for every dive.
Instead collect the selection in a QItemSelection and only call
QItemSelectionModel::select() once. This makes selecting multiple dives
significantly faster.
The loop also expanded the trips with selections. This has now to be
done in an extra loop.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When determining the selected dive sites to highlight them on the
map, the DiveListView code used the local indices of the selected
dives. However, that was unreasonably slow. Even though a layering
violation, let's access the core data structures directly. In my
tests this improved from 700 ms to 0 ms!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The DiveListView widget has to differentiate between programmatical
und user-initiated selection changes. It did so by using the
DiveListNotifier::inCommand() flag.
However,
1) There is only one point of entry for such selection changes,
viz. the MultiFilterSortModel::selectionChanged() signal
2) This signal is not only emitted in command-context.
Another source is for example dive-map selection changes.
Therefore, move the programmatical-selection-change status down
to the widget and set/reset it in the diveSelectionChanged() slot.
This makes "select all visible dive sites" somewhat faster. Sadly,
not as much as expected.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was used by the map to select dives. However, the map now calls
the core function directly, so this can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was erroneous, as it should only be called at the end of
a selection change, not after every single dive. It made selection
of multiple dives extremely slow.
Reported-by: Jan Mulder <jlmulder@xs4all.nl>
Debugged-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
DiveListView::selectDive() is an overloaded function. The second
version was only called by the first version, so we can fold one
into the other.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo-machinery makes sure that a current_dive always exists
after an undo command. This part of the code should never be
called.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This appears to be an artifact. Collapsing does not unselect
the current dive, so reselecting it appears pointless.
Also it is unclear why the selection should be restricted to
a single dive after collapsing.
Probably that was originally meant to expand only the trip
with the current dive in it?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Grammar-nazi ran
git grep -l 'indexes' | xargs sed -i '' -e 's/indexes/indices/g'
to prevent future wincing when reading the source code.
Unfortunatly, Qt itself is infected as in
QModelIndexList QItemSelection::indexes() const
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Commit 2cea115ddb "fixed" the selection
by hooking into mouseRelease events. An unintended consequence was
that scrolling with the cursor keys didn't update the current dive.
Therefore, also hook into the corresponding key-press events.
This is just horrible, but I'm not aware of any possibility to fix
it properly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Fix two issues:
1) When narrowing the selection, we didn't get setSelection()
calls. Only, when the user released the mouse button was
the selection updated. Therefore, hook into the mouse-release-
event and update the UI if the selection changed.
2) We updated the ui in setSelection(). However, this was called
on mouse-move even if the actual selection didn't change.
Therefore, compare selection before and after processing of
the event and only refresh the UI if there are changes.
Clearly, this can only be a quick stopgap solution and we
should find out how to properly hook into the selection change
machinery. Though see commit 4928c4ae04
for the reason why we do things as we do them.
Fixes#2595
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
