According to the Qt-docs you *may* send the new values in the
NOTIFY signal of Q_PROPERTYs. However, since changes will lead
to a reevaluation of a whole expression, this argument will be
unused. All it does is make the code more verbose and brittle:
What happens if you send the wrong value?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We have a singleton class ThemeInterface, which means that it
is global and exists only once. It's members are static, i.e.
also global. A message from the department of redundancy department?
In any case, that makes no sense. Let's just make these members
local to the class.
I would even rip out the whole singleton thing, since the object
is not accessed anywhere outside from QML. Let's keep it for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
An Android user might reasonably assume that they can use the back button to
close the global or context drawers. So act accordingly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should deal with the rather confusing 'No dive in dive list' shown
while loading and processing the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since apparently the header property of the ListView isn't reliably
making sure that our filter input line is visible, let's move the filter
header to be it's own visual element and manually manage the
relationship between that and the ListView.
The obvious idea was to anchor the ListView to the bottom of the
filterHeader, but that didn't work in my tests. So instead we are using
the topMargin to make sure that there is space to show the header.
Because this re-indents the whole filterHeader, 'git show -w' gives a
much better idea what this commit actually changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of the crude and error prone bool, let's just use the right tool
for this job.
In order to avoid issues with a goto across a mutex boundary, this
slightly restructures the code in one place - 'git show -w' makes it
clear that this is really rather simple in its changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I'm suspicious that an issue that some people have seen around changes
not being saved is caused by our handling of alreadySaving.
When starting with Subsurface-mobile in no-autosync mode, we were able
to end in a scenario where alreadySaving was true, even though there
were no unsaved changes. And in that case no changes made during such a
session were saved unless the user forced a manual sync with the server.
This commit radically changes our approach to handling the flag. It
moves it right next to the actual calls into code that could modify git
storage, and ensures that the flag can never stay set.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In the mobile version of the dive-editing command, the fulltext
filter was not updated. Thus, when editing a dive while the filter
was active, the dive would disappear.
Unregister the old and register the new version.
Reported-by: Chirana Gheorghita Eugeniu Theodor <office@adaptcom.ro>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When editing dives, the undo-command sends a filte changed signal.
The models catch the signal and check whether the filter status
changed.
The mobile-version of the dive-edit command simply exchanged the
dives. This could lead to inconsistencies when the filter flag
was overwritten. Therefore, make sure that the filter flag
is not overwritten by the dive-exchange.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
With this, international Portuguese, Swedish, Finnish, Hebrew, Spanish,
Romanian, Dutch, and German are 100% translated.
Catalan, Chinese, and Bulgarian are more than 90% translated as well.
A HUGE thank you to the translators once again stepping up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a feature that I never fully understood, but that apparently is
causing the drawers to show up for people who are just trying to
interact with the action button. The approach here is really drastic and
crude, but in my testing it seems to work.
Reported-by: Hartley Horwitz <hhrwtz@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was disabled in the past because it was deemed to slow. A lot
of time has passed, since. Maybe on current phones / iPads this is
acceptable again?
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a context menu entry for top level dives that allows the user
to create a trip for that dive.
Unfortunately this creates a new string to translate right before a
release...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When we start adding a dive, we actually create a diveAdd undo command
so we have a dive that the user can edit. Which means we need to undo
this action if we cancel.
Also, for a more consistent UI, we should pop the dive details page that
we used to edit this dive and bring the user back to the dive list.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We still used pageStack.push() all over the place.
Also, in showPage, disable the map hack if the user actively picks a
different page.
This should fix an issue where the user picked the map and then tried to
add a dive to the dive list - and instead of the dive edit was shown the
map again.
Reported-by: Hartley Horwitz <hhrwtz@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's possible for our code to think that the user wants to pan the
profile before realizing that the user actually is making a pinch
gesture. In that case the profile could get stuck in semi-transparent
mode. This prevents that from happening by explicitly resetting the
opacity to 1.0 when we start a pinch.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user is scaling out again we need to make sure that our offsets
are adjusted so that we always show a subset of the profile and not
'empty space' outside of it. Instead of reimplementing the offset logic,
let's just trigger another paint() call.
This requires a trampoline function because of different signal and slot
signatures.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When zooming and panning the profile, make sure we always show a subset
of the profile and don't end up showing the empty space outside of the
profile.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
And allow touchpad gestures to be recognized as well. This has no
negative impact on the mobile platforms, but makes it much easier to
test profile scaling / panning on the desktop.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To mark invalid dives, we use a struck-out font, which was a static
variable at translation unit scope, i.e. initialized at application
startup. Sadly, this crashes on iOS.
It is unclear when we can initialize fonts. Try to move initialization
to the constructore of DiveTripModelBase and make the font a member
of that class. For consistency, also make the invalidBrush a member
of this class.
This now means that the diveData function cannot be static anymore,
since it needs access to the font and brush. But OK.
Reported-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This way someone trying to swipe from dive to dive won't inadvertantly
pan the profile instead. And panning it really only makes sense when
zoomed in in the first place.
This could leave us in a situation where we zoom in, pan, zoom out and
now the profile is out of whack and we cannot correct it. A simple click
on the profile fixes that.
The real solution would be some constraining / adjusting as we zoom and
pan to ensure we keep things correctly positioned. Maybe I'll figure out
the correct way to do this later...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I would love to figure out a way how to bundle the user manual and load
it from the device file system, but in the meantime this should continue
to work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this is based in large parts on the existing manual, it is a fairly
substantial rewrite with mostly new screenshots.
Includes edits by Rainer Mohr.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With the change in context for all the commands there was a lot thrash
in the translations. I tried to work around that as well as I could and
to keep the translations valid on Transifex, but a few appear to have
been lost in the shuffle.
But at least the command texts are now correctly translated.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The way inheritance is implemented for the undo commands confuses the Qt
translation tooling - with the result that the context assumed by the
tools used to extract the strings doesn't match the context calculated
at runtime - so all the translations for the strings in undo commands
fail (including creating proper numerus forms).
This change forces a consistant context tag, at the price of creating a
significant delta for the source strings (the strings themselves stay
the same, but the context for a lot of them changes). I am hoping that
Transifex is smart enough to automagically add the correct translations
for these, but I guess I won't know until I try.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This had been something I did manually which caused all kinds of
mistakes. I finally figured out how this is supposed to work.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
