Simply move that export to the top of the file with the others.
Suggested-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
With all upgrading, the build apks now show up in a slightly different
location. Correct this in the scripting. Notice that this is debug
building only. Release building is outside the repo.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
This is squashed commit consisting of a number of subjects, all intended
to get our app to build, link and run on device, but as the steps are
small (but non-trivial), I document them in this one commit.
1) Do not use OpenSSLs install targets, but simply copy the wanted build
artifacts manually. The main reason for this, is that the install
targets want to install a lot more than we build, so it also builds
parts of the OpenSSL suite that we will never use.
2) As Android does not like shared libraries with embedded versioning
(and the used androiddeployqt actively prevents adding versioned
libraries to the build), strip all this data from the generated shared
libraries. This trick was already there, but its adapted to all possible
conflicts.
3) The OpenSSL config script seems rather broken, resulted in failed
builds, and calling the underlying Configure is simpler.
4) Finally, parts of the OpenSSL code uses stdio things like stdout,
stderr, etc. These showed up as undeclared external on build time. Well,
luckily, there was an easy way out using 2 -D(efines). This feels hacky,
but does the job (and we are not interested in the output of OpenSSL in
our app).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
The main reason for upgrading of the Qt version is the hunt for a broken
BT/BLE stack, preventing downloads from BT/BLE enabled DCs, in relation
to arm64 architecture builds. (And the absolute need for an arm64 build
in relation to the publication of the Android app in Googles Play
store).
In addition, Qt 5.12.4 starts supporting OpenSSL 1.1.1c, and trying to
use our current OpenSSL 1.0 series is highly discouraged by Qt (and
OpenSSL itself).
So, upgrade both in unison. But ... be careful bisecting issues on this
commit, as it does break our build. That will be fixed in the next
commit.
This fixes the BT/BLE download for arm64!
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
But only functions that operate only on gases. Functions concerning
cylinders or dives remain in dive.c or are moved to equipment.c
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions were spread out over dive.c and divelist.c.
Move them into their own file to make all this a bit less monolithic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Make dive.h a bit slimmer. It's only a drop in the bucket - but at
least when modifying tag functions not the *whole* application is
rebuilt anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The application state was encoded in a QByteArray. Thus, there was
no compile-time checking. Typos would lead to silent failures.
Turn the application state into an enum. Use the enum-class construct,
so that the values don't polute the global namespace. Moreover,
this makes them strongly typed, i.e. they don't auto-convert to
integers.
A disadvantage is that the enums now have to be cast to int
explicitly when used to index an array.
Replace two hash-maps in MainWindow to arrays of fixed sizes.
Move the application-state details into their own files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the future, we will need DiveListNotifier.cpp in mobile builds.
Therefore, add it to the qmake project file for iOS.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This really is mostly for my scripting and how I build the official packages.
But there isn't much harm having it in the repo. And it makes my life easier.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should fix the current Travis build failures for Android.
It is odd how we have ANDROID_PLATFORM and ANDROID_PLATFORMS,
buf for now all I care about is that the Travis build completes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This fix makes no difference from usage of this script in Travis
context, as every build starts from a clean VM, but the very few
developers that build for Android locally, and that want to use the new
style docker container builds as well, things are broken.
libdivecomputer has build artifacts in its source tree (and that source
tree is shared between local and docker run). So it happens that
libdivecomputer is configured locally, and afterwards fails to build
in docker build as its already configured, but not for the docker
image its now running in.
The fix is simple. Always reconfigure libdivecomputer when using this
script.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
So we don't need the pre-built binaries anymore, and we don't need the
travis_wait hack anymore for potentially slow downloads as that is all
installed in the container already.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This had to be embedded in the build process (or better, solved for
real).
Using Cmake, Clang, NDK 18b, Qt 5.12 beta 4, some Subsurface code does
not compile. At this point in time, its fully unclear to me why we see the
error as it is.
Thing fail deep down in Qt and NDK headers on #include <cmath>. Error like
"::signbit is not in the global namespace". The most logic reason is an
improper order in which include paths are constructed in the build process.
Any attempt to find the real reason failed. Even very similar command lines
from a qmake build that succeed fail with a cmake style build.
The very very dirty hack is commenting out some lines in NDK 18b:
"./android-ndk-r18b/sources/cxx-stl/llvm-libc++/include/cmath
Comment lines 313-325, and all build, links and runs with no errors
related to this known at this point.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
make sure that all lib code is compiled with -fPIC as things will not
link due to error "requires unsupported dynamic reloc R_ARM_REL32" (for
arm build).
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
On very clean builds not using the wrapper script, the compile of libzip
simply fails because it depend on openssl include files. Simply swap them
around.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Mysteriously, openssl does not compile with clang with a
sha256-armv4.S:2638:2: error: invalid instruction, did you mean: adr?
The easiest way out is compiling without no_asm. This obviously lowers
the bandwidth on the SSL link (as the asm code is there for performance
reasons), but it has no visible performance loss in my tests.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
With a preparation done in the 4 commits before, now add the arm64 and
use clang instead of gcc as compiler infrastructure.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Very annoyingly, openssl is re-build and downloaded numerous times
when doing partial builds. Reason for this, is that the original checked
out git repo is moved away, and build in source (as openssl does ...).
So, this simple change leaves the checked out repo in place, and
copies the tree to build in.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
A subtle one. When compiling for arm64, libzip is the only package we
use in mobile that installs its product in lib64. There is no reason for
this given the way our build process is. So, simply force the library to
reside in lib, independent if we are building arm or arm64
architectures.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Simple cleanup. Do not hard code armv7 as we have QT_ARCH. This
allows, in the future, for arm64 builds as well.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Hard coding desired ANDROID_PLATFORM on multiple places is simply bad.
Fix this. Further, set the variables to a much newer state.
CAVEAT: this will likely break android build, so be careful on
bisecting. All fixed in next, related commits.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
Make sure all required Android SDK components are explicitly installed
before starting the actual build.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
With commit 0d8fc7ef970e of qt-android-cmake, the buildtools version
is automatically detected. So do not try to pass it any more, as
this breaks the build.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
And use that to have our Travis build still work with the existing MXE
build container as well as the even older, pre-compiled MXE binaries
used in the windows build.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
That's the minimum platform that we have used for a while now,
corresponding to Android 4.1 and newer (i.e., quite ancient).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add libftdi1 in comments in MXE build script.
[Dirk Hohndel: and mention that it is possible to build without it]
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
mdbver.h is created on the fly by configure script and placed in our
$BUILDDIR/include, while the compiler search for it in
$SOURCEDIR/include. This could probably be achieved fine-tunning
configure script but ... well, it works.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
This still doesn't seem to work as expected and needs more testing.
Also, it can be turned off via command line argument
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This reverts commit 53341c037d.
The commit isn't wrong, but it breaks Travis and I can't seem to get the
newer MXE build to work on Travis. So while I figure out how to work
around THAT, let's just revert this and come back to it once Travis is
ready.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This currently requires the wip/win branch of qtconnectivity. Eventually
this should be merged into upstream Qt.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We are not OpenGL heavy so this saves battery life.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Build systems that run from tar balls and not git fail to create valid
.appdata.xml This solves the problem for tar balls that we create for
OBS via our own make-package script. It doesn't solve the problem for
Arch or Gentoo who I believe take our tar files created via git archive.
One way to fix this would be to change the process by which I create
those tar files, I guess.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
update testgitstorage.cpp to use qPrefProxy and qPrefCloudStorage
remove core/prefs-macros.h since it is unused
Signed-off-by: Jan Iversen <jani@apache.org>
Add class variable tooltip_position to qPrefDisplay
Add class variable lastDir to qPrefDisplay
qPrefDisplay is updated to use new qPrefPrivate functions
Adjust test cases incl. qml tests
qPrefAnimations only has 1 variable, that really is a display variable
Merge the variable into qPrefDisplay, to simplify setup (and avoid loading
extra page in qml).
correct theme to save in correct place, and make it a static
class variable
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct diveComputer
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct diveComputer
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct preferences
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct preferences
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct prefs
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct diveComputer
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct diveComputer
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct diveComputer
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
This indents the code that is only executed when we aren't in 'quick'
mode. git show -w will show that there is no code change in this commit.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This allows us to skip all the checking / building of dependency
libraries. This also allows us to pass extra arguments to the make
command by separating them from the arguments to build.sh with '--'.
This commit is easier to understand because it didn't increase the
indent in the large block of code that is now only executed if we aren't
in 'quick' mode. That will be fixed in the next commit that is
whitespace only.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Switching to GitHub as source for libzip means that we need to encode
the version number differently. Newer versions of libzip don't compile
cleanly on Android and this one seems new enough.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct diveComputer
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct prefs
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct diveComputer
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct diveComputer
- set function have set_<name>
- signal function have <name>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way
SettingsObjectWrapper handles it) secures the same storage name
is used. Having the set/get/load/sync functions grouped together
makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct preferences
- set function have set_<name> (from struct preferences>)
- signal function have <name>_changed (from struct preferences>)
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way SettingsObjectWrapper
handles it) secures the same storage name is used. Having the set/get/load/sync
functions grouped together makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
Add qPrefPrivate class which contains one QSettings variable,
delete QSettings from qPref* class definitions
this secures there are only instance of QSettings
(QSettings needs to be in a QObject class to work)
Signed-off-by: Jan Iversen <jani@apache.org>
Update set/get functions to follow common name scheme:
- get function have same name as in struct preferences
- set function have set_<name in struct preferences>
- signal function have <name in struct preferences>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way SettingsObjectWrapper
handles it) secures the same storage name is used. Having the set/get/load/sync
functions grouped together makes it easier to get an overview.
REMARK: this commit only defines the class, it is not active in production
Signed-off-by: Jan Iversen <jani@apache.org>
Move few mobile only functions from mobile-helper to mobile-main
remove subsurface-mobile-helper
file structure is now subsurface-*-main.cpp + subsurface-helper.cpp
Signed-off-by: Jan Iversen <jani@apache.org>
The versions for openSSL in variables.sh and get-dep-lib.sh needs to match or we end up recloning the repo on every build.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Add a comment to the variables.sh file so we don't forget to update
qt version in the qt-installer-nontineractive file as well.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Instead of dealing with the challenges of downloading and installing the
official package (which really prefers to be run interactively and
frequently caused Travis failures) we get the pre-packed bits from our
cache instead. Less data to transfer, quicker install.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
copy Display from SettingsObjectWrapper to qPref as its own class
file. Update Display to use a common load/sync scheme.
Update set/get functions to follow common name scheme:
- get function have same name as in struct preferences
- set function have set_<name in struct preferences>
- signal function have <name in struct preferences>_changed
one class one .h/.cpp is the C++ idiom. Having load/sync of each
variable in 1 functions (in contrast to the distributed way SettingsObjectWrapper
handles it) secures the same storage name is used. Having the set/get/load/sync
functions grouped together makes it easier to get an overview.
REMARK: this commit are made to show the use of the low level LOADSYNC macros, which will
be used for special cases. This class is NOT linked into the live system.
Signed-off-by: Jan Iversen <jani@apache.org>
Update the scripts used to build subsurface-mobile for
andriod to use the variables file.
Removed checks for obsolete Qt versions.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
This adds a file that contains the variables used in
the android-build-wrapper and build scripts.
This gives a single location for setting which versions
of Qt, NDK and SDK we use when building the mobile app on linux.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
commit ec0511e824 ("ios: concentrate build dirs") moved the translations around
without updating the way they are accessed, causing our release 2.1.0 on iOS to
not be localized.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
add 2 header files and 1 cpp file (qPrefPrivate does not have an implementation)
The rewrite/consoliadation of SettingsObjectWrapper, qmlmanager, qmlpref and planner
needs a place to put common private parts (qPrefPrivate) and 1 common class (qPref).
Signed-off-by: Jan Iversen <jani@apache.org>
But simply ignore when building outside of Travis.
Of course since we are building Android in a container, we need to first pass
the environment variable to the container...
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
remove MapWidget entries from mobile-resources.qrc, and
reference map-widget.qrc in Subsurface-mobile.pro for iOS
Signed-off-by: Jan Iversen <jani@apache.org>
-all will build debug and release for the choosen architectures
armv7,arm64,x86_64 without extra parameter and only
x86_64 with -simulator
Use -all to prebuild all 6 variants we support.
Signed-off-by: Jan Iversen <jani@apache.org>
helpers.h included qthelper.h and all functions declared in helpers.h
were defined in qthelper.h. Therefore fold the former into the latter,
since the split seems completely arbitrary.
While doing so, change the return-type of get_dc_nichname from
"const QString" to "QString".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The text and icon was so low, that the page started to scroll on
an iPhone (at least on a model 6s).
Anchored Text to top, and icon to text.
Signed-off-by: Jan Iversen <jani@apache.org>
Having a split between ios and ios/Subsurface-mobile is just confusing
and without a practical reason
Move files from ios/Subsurface-mobile to ios and update .gitignore
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Changed .pro file to supress warnings
clang does not allow all of the issued warnings to be
supressed with -Wno-foo, so instead doing -w
Signed-off-by: Jan Iversen <jani@apache.org>
The Qt libraries are compiled as iOS 10.0, we link
as iOS 8.0, this is a problem waiting to happen. First
time we use a Qt function that uses a iOS 10.0 specific
function the app will crash.
Bumping iOS minimum version from 8.0 to 10.0
Removing the 76x icon, which are not valid from 10.0 and forward
Signed-off-by: Jan Iversen <jani@apache.org>
And replace it with something that works on a modern cmake.
The upside with using the right linker, we get the symbols resolved
correctly so we don't need to regex the code.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Since about a year ago qt-android-cmake shifted to using gradle instead
of ant, and the android sdk's stopped supporting ant to.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
This simplifies the code and uses correct quoting for variables.
This also fixes the sha1-stampfile handling so that we don't build
libdivecomputer every time.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
This reworks the googlemaps build to be more like the other builds, with
the same pattern and way of detecting what we need to do, and when we
need to rebuild it.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
We already have a variable pointing to the source dir for subsurface, so
use it.
This way we can build out of tree, in any directory.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Info.plist is no longer generated by qmake but by build.sh,
and it is more interesting to highlight the fact that it is
open software
Signed-off-by: Jan Iversen <jani@apache.org>
Made versioning identical to scripts/build.sh
Having the same version of 3rd party libraries across platforms
secures a more stable product.
Signed-off-by: Jan Iversen <jani@apache.org>
script/build.sh uses the builtin libxml2 and do not build locally,
updated build.sh and Subsurface-mobile.pro to to the same.
sadly enough xslt is not distributed for iOS so it must be built.
Apart from simplifying the script it saves build time
Signed-off-by: Jan Iversen <jani@apache.org>
script/build.sh uses the builtin sqllite3 and do not build locally,
updated build.sh and Subsurface-mobile.pro to to the same.
Apart from simplifying the script it saves build time
Signed-off-by: Jan Iversen <jani@apache.org>
In a "virgin" repo incl. libdivecomputer, starting by running
ios/build.sh caused an error in libdivecomputer,
because autoreconf was never run.
Changed build.sh to check if libdivecomputer/configure exist, if
not run autoreconf
Signed-off-by: Jan Iversen <jani@apache.org>
This patch allows users to set a bundle identifier,
without opening Xcode (set as env. variable).
If the env. variable is not set (like e.g. on Travis) it defaults
to org....
Signed-off-by: Jan Iversen <jani@apache.org>
We used to hard-code the bundle ID which meant that developers always had to
manually override the bundle ID in order to be able to sign the iOS app for
local testing. With this change, the official builds will continue to work
without manually opening the project in Xcode, yet other developers will use
the Apple-recommended format in order to set their own bundle ID.
This is based on a suggestion by Murillo Bernardes.
See #1246
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use git repos and checkout corresponding tags where possible.
Use more reliable servers to download source from.
[Dirk Hohndel: refactored Jan's original commit in #1241]
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Updated INSTALL to point at packaging/ios/README
Updated README to 'facts'
Deleted ios_build_instructions as they are covered in README
[Dirk Hohndel: refactored Jan's original commit in #1241]
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It makes sense to be able to control this with command line options.
On Travis this avoids the signing problem and makes the build much faster.
Still should be enough to catch iOS breakage.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Xcode happily accepted the incorrect plist syntax for a boolean and the app
did the right thing when installed locally - but once you upload to the
iTunes store the error causes that to fail.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By creating it in the Documents path and setting the two magic keys,
iOS will make the log file available to the user.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Up until now we just reused the macos.c file for convenience, hard coding a
specific file path that may or may not work on iOS. Instead get the preferred
path from Qt and for this we need to be able to call into Qt, so this needs to
be a C++ file.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
qthelper.cpp is already quite voluminous. Move the recently
introduced localized versions of (v)snprintf() and put_format()
into their own translation unit.
Moreover, adopt C-style semantics for asprintf_loc(). This function
will be used to remove fixed-size buffers in core/plannernotes.c.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
googlemaps archive is a fat file already, containing
armv7, arm64 and x86-64, so no need to build it
multiple times.
Signed-off-by: Murillo Bernardes <mfbernardes@gmail.com>
In the comment/instruction how to build MXE add "libssh2" and "curl"
to the make call. This seems to be needed in newer versions of MXE.
Signed-off-by: Stefan Fuchs <sfuchs@gmx.de>
The xmlsoft.org links sometimes time out. Sadly, GitHub API gives us an
oddly named top level directory in the tar file, so lets strip that and
replace it with the "usual" name.
Also, for the "raw" tar files from GitHub we need to run autoreconf
ourselves.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since all qt-helpers are defined in qthelper.cpp, there seems to be
no reason to have two include files. By unifying the two files,
duplication and inconsistencies are removed. The C++-only part is
simply compiled away with #ifdefs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Prepare the building script to suport travis or set other automated
builds, while keeping other options to manual builds.
In before_install script, create needed directories, and dowload
mdbtools sources.
Add smtk2ssrf build script to travisbuild.sh
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
At least, now the Travis builds use the same Qt version as the
production builds from Dirk that go to the AppStores.
Signed-off-by: Jan Mulder <jlmulder@xs4all.nl>
For some reason it suddenly cannot figure out which build program
to use. This seems like a weird hack, but works.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since it's the SDK where things are failing, doing it this way makes the
turnaround time of my attempts to fix this faster. And in the larger
scheme of things, the order is irrelevant.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I clearly had forgotten to update the Android specific scripts when
adding the libdivecomputer submodule.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the submodule isn't initialized, run git submodule init before
running submodule update. Also, ensure that the autotools are set up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way we can avoid having to use Qt Creator (in preparation for
eventually testing the iOS build in Travis CI).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The build process uses the dummy.qml file to determine which QML modules
to package. This ensures that Subsurface-mobile includes all its
dependencies.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
