Since we have now destkop and mobile versions, 'qt-ui' was a very
poor name choice for a folder that contains only destkop-enabled
widgets.
Also, move the graphicsview-common.h/cpp to subsurface-core because
it doesn't depend on qgraphicsview, it merely implements all the
colors that we use throughout Subsurface, and we will use colors on both
desktop and mobile versions
Same thing applies for metrics.h/cpp
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
On OSX and Linux only, the cosmetic width of the QPen
on profile axes does not work and is weirdly dependent on the
fact if a printer is installed or not. Possible Qt bugs at hand.
The same is not present on Win32.
To solve the issues we add setPrintMode() in DiveCartesianAxis
and call it for all instances of the class in ProfileWidget2.
This patch also moves gridPen() as a private member function
of PartialGasPressureAxis as it now needs to access member
variables.
Fixes#943
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
resetZoom() is now a new method that is called both
when 'printMode' is updated or when the dive is re-plotted.
Fixes a bug where zooming in on the profile and then
printing the dive has the profile at the wrong zoom level (makes
the profile look smaller).
Reported-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the whole idea of calling these functions through the MainWindow
instance is atrocious, until we change the architecture of all this
refreshProfile() is a useful function to have.
In order to make this cleaner to implement I allowed an argument to
ProfileWidget's replot() which allows picking a specific dive. By
defaulting this to 0 we get the previous behavior when calling replot()
without an argument.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After a replot, check if there is an error message to display.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While printing only draw headings, SP changes, gas events or bookmark
events, otherwise don't show anything.
Many warning logos can hide the useful information especially in
templates with small dive profile area.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
We really shouldn't need to connect to the MainWindow in order to get the
right scale for the fonts when printing. While printing likely will remain
a desktop only function, this is just bad design. And making calls like
this from the paint() function is a bad plan, anyway.
So instead we make sure that every DiveTextItem knows what the printScale
was when it was created (or actually, when the text was first set as they
frequently get created before we have a scene which we use to get to the
profile), and gets updated whenever that scale changes.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having it as part of the DiveCalculatedCeiling class caused us to manage
this text 17 times (and plotting it 17 times) which is rather silly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This class will surely be used on the mobile version, and it was very
tangled inside divepicturewidget.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Still trying to make it easier for the Mobile Port:
This patch is a bit bigger than I hopped, but it was the smallest that I
could get.
A lot of TODO items where added where I broke the code because the current
implementation would break the QML implementtion on the designer. I'll
most probably fix those myself when I finish the transition to the models
to the new folder.
I only moved both models at once because there's an interdependency
between them (seems inevitable, tough, but I'll take a better look at it
later).
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is to avoid visual clutter when replanning logged dives.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Right now the way to edit the profile of a manually added dive is really
counterintuitive: you have to first make some random change to the dive
information, then the profile switches in to editing mode.
This commit adds a simple context menu entry on the profile that is only
shown when the a manually added dive is displayed.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
profilewidget2.cpp:1398:25: warning: the omitted middle operand in
?: will always be 'true', suggest explicit middle operand [-Wparentheses]
profilewidget2.cpp:1403:39: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Points (handles) from the last dive ADD operation remain on
the profile unless we clear them.
fixes#846
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The point graphics are allocated but doens't seem to be
deleted anywhere. We attempt to fix that in clearHandlers().
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
t = 0 isn't really special here. We shouldn't allow two gas changes at the
same time, period.
We also can do away with the special handling to mark the dive list
changed and replot things if a gas change gets removed. That's done at the
end of this function either way.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove the existing gas change events @0:00 when new
one is added @0:00.
Signed-off-by: Yousef Hamza <jo.adam.93@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When zoomed in, things like moving planner points is not possible,
but if the user attempts that, replan() -> plotDive() is called
and the zoomLevel should be reset to the default value (we don't
really want that), but instead it's lost for some reason
(as the user reports: "Somes times, it changes to 100% which is ok").
If moving points becomes possible eventually while zoomed in,
we need to figure a way to replot without resetting the zoom level
in plotDive().
Fixes#851
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Showing an Error message is better called from the Notification Object,
So for consistency old references to showError is replaced by calling
the notification object.
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is the last patch in the series of clearing up the
mainwindo.ui. Now to bugfixing.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Now it's created in the mainwindow.cpp as part of the new
way to configure the interface.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It's now set up from the mainwindow.cpp file.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of inventing another way to do this (and inevitably forgetting a
path where this should be re-enabled) I renamed the DcShortcup related
function and made them enable/disable the copy and paste shortcuts as
well.
Of course there now is one exception (isn't there always?): in "ADD" state
we don't want to be able to switch DCs, but we do want to be able to
paste.
Fixes#825
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Without this patch, the user effectively cannot change the dive mode as
any change is overwritten by replot copying current_dive over
displayed_dive. The way out is not to call replot but only update the deco
ceiling directly.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This ruler shouldn't appear in ADD or PLAN mode, it's a bug
and may crash things.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When calculating maxima for a dive, we need to take data from all existing
dive computer structures plus potentially also a fake dive computer
structure that is just passed in in order to create a meaningful profile.
Commit 86c961614b ("Actually walk all dive computers, don't just claim
to do so") missed that second case and no longer took the fake_dc into
account, breaking the display of dives that don't have samples.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There were situations when the last text was still shown. E.g. when the
current file was closed and then a new dive was imported from CSV.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch does some cleaning up of the code that provides visualisation
of CCR o2 sensor and o2 setpoint data. It reduces the number of
conditional evalauations that are required and it improves the readability
of these parts of the code.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch creates the possibility of viewing the individual sensor
values when the po2 button on the profile toolbar is activated. This
follows exactly the procedure for optionally displaying the setpoint
values while viewing po2. A checkbox in the preferences panel determines
whether sensor information is shown. By default it is set to OFF. When
checked, and the po2 button is activated, sensor1 values are shown in
grey, sensor2 in blue and sensor3 in brown.
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the first dive computer had pressure samples, but the second one (and
no higher one) did, then we would draw a flat horizontal line for the tank
pressure graph (but lable it with the correct pressures). This routine
that is hunting for the actual maxima and minima does have to really go
through all dive computers, not just "this one and up".
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
qt-ui/profile/profilewidget2.cpp:1351:10: error: invalid use of incomplete type ‘class QDebug’
qt-ui/printlayout.cpp:141:27: error: variable ‘QPointer<ProfileWidget2> profile’ has initializer but incomplete type
In commit f9ceff009b ("Clean up the header files") things got broken for
an as of now unreliesed future version of Qt.
Signed-off-by: Thiago Macieira <thiago@macieira.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move the heart rate graph down to the same space as the tissue saturation
graph so that it does not overlap with temperature or partial pressures.
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Lots and lots and lots of header files were being included without being
needed. This attempts to clean some of that crud up.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We did three cals to mapToScene / mapFromScene on the mouse moveEvent at
the ProfileWidget2 where we only needed to call one in the common case and
two in the worst case.
This doesn't really help in terms of speed (unless you have a really old
cpu) but since it's code that gets called *very* often, it seemed a
reasonable thing to do.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Take instantMeanDepthLine out of the code. We have the moving average line
plus the exact data in the information overlay.
Signed-off-by: Cristine Guadelupe <cristineguadelupe@me.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Correct minor malfunction with CCR setpoint display. It was showing even
when the po2 display was turned off. This patch ensures that the setpoint
graph only shows when the po2 toolbar button is activated (and in addition
the appropriate checkbox in the Preferences).
Signed-off-by: willem ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Commits 0de3bc8452 ("Display CCR setpoint values on the po2 graph") and
65eed80e37 ("Don't always show the setpoint graph") didn't take into
account that current_dive could be NULL and therefore accessing current_dc
could crash.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
