Seems that testing if BOOKMARK is empty is a bad idea. We end up not
getting any samples, but the ones containing a bookmark. So we need to
switch the logic to testing if BOOKMARK contains something and do those
tasks first and otherwise grab a regular sample.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seems that DiveManager does not always return the dive duration in
DIVETIMESEC field. In this case we can try to calculate the duration
from sample count and interval.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Need to discard dive site notes on csv export..
miika
From ab23245e2acee32410fa680d0eaab098af69b5c2 Mon Sep 17 00:00:00 2001
From: Miika Turkia <miika.turkia@gmail.com>
Date: Mon, 21 Mar 2016 17:50:28 +0800
Subject: [PATCH] CSV export: discard dive site notes
The new format of divesite management breaks the CSV export as the notes
of divesites are matched.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to match the divesites to suppress extra output that breaks the
XML. This is because the divesites are actually gathered by calling a
template.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The timedepthmode specifies the time in seconds when using si units,
otherwise minutes. This patch implements this support.
Fixes#981
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
According to the specification each proper sample should have depth, so
we can just ignore the empty waypoints.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Grabbing all gas mixes was added for Xdeep default cylinders, and it is
not required for other data sources that have tankdata info in the UDDF
file.
See #958
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As we join LOCATION with SITE on divelogs.de import using slash (/) as a
separator, we might as well split on last slash on export.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Let's use the same assumption for working pressure (where not defined)
as the origin uses.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We were missing the import of cylinders' working pressure when syncing
with divelogs.de. This piece of information is required for proper unit
conversions when user uses imperial units for displaying the
dive information. (Both Subsurface and divelogs.de use metric
internally, or at least the export from divelogs.de is in metric.)
See #907
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If input is in F, we need to convert it to C on import.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Include the DC's hardware name if it was given as parameter on CSV
import.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This looks if we're importing any o2 values form the csv file, then its
probably a CCR dive.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of replacing all the empty model tags after a csv to xml
transform with some text, just produce that text in the csv to xml
transform instead.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds support for importing individual O2 sensors from a CSV file,
e.g. an APD log viewer file.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We got additional slashes in front of the site if country and/or
location was missing.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As the gas changes can be parsed more reliably from the gases list, we
just ignore the gas_change events as redundant information.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Gas change events can be parsed properly from the gases list with clear
information on what the gas mixture was.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This includes all the data computer related data within the divecomputer
tag. All the extra noise is just indentation (apart from moving the
divecomputer end tag).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Next commit will do indentation so this one will keep it clear of what
actually occurs.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Rounding always up should give us sensible sample interval as EON Steel
adds extra samples.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The logic to select samples from EON Steel for divelogs.de export is the
following:
- Ignore sample at time zero, as that is surface, and the second "odd"
sample contains information we are interested in
- Grab the second sample, first sample with pressure and temperature
readings
- Grab the third sample - "grand parent" is 0, thus our first interval
sample
- Grab the samples when the predecessor (or grand parent) is at least 10
seconds away
This logic seems to produce reasonable results when exporting EON Steel
logs to divelogs.de. Naturally there might be corner cases, that are not
taken into account, but this basic logic seems reasonable in normal
cases. (Unfortunately analysis is done based on a single dive.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This sets the Suunto EON Steel sample interval to 10 seconds when
exporting to divelogs.de.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This add support for Seabear's new import format that is used by H3 and
T1. In the future also the Hudc should switch to the new format. The
main difference to the old one is that time stamps are no longer
recorded in the samples, but intervali is specified in the header.
The header contains other useful information as well that we should
build support for. E.g. surface pressure, gas mixes, GF, and mode might
be useful additions later on.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The manuals all will need a careful read.
The changes to use lsb-release and the PCLinuxOS specific files got lost
because I didn't want to try to rewite this in the middle of a merge.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Conflicts:
Documentation/50-pot/subsurface-manual.pot
Documentation/fr/po/subsurface-manual.fr.po
Documentation/user-manual.txt
Documentation/user-manual_es.txt
Documentation/user-manual_fr.html.git
Documentation/user-manual_fr.txt
Documentation/user-manual_ru.html.git
Documentation/user-manual_ru.txt
file.c
qthelper.cpp
subsurface.pro
subsurfacesysinfo.cpp
xslt/DiveLog.xslt
This adds a bit more information to dive notes on DiveLog import.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I originally thought about converting the time as well, but my fingers
were too slow and memory too short to actually do that :D
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds a bit more information to dive notes on DiveLog import.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I originally thought about converting the time as well, but my fingers
were too slow and memory too short to actually do that :D
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since UDDF import uses different namespaces, we need to count the
temperature samples in all of them to get temperature readings from
waypoints.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Should have removed the getFieldByIndex template from these files when
it was moved to commonTemplates. Otherwise these imports wont work.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will export the cylinder information to divelogs.de also if there
is a pressure drop of at least 5 bars. (Previously only a gas switch to
the gas triggered the export of that particular cylinder.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Implementation of getFieldByIndex on this file does not support
quotation so lets use a template that is developed further.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The profile export now uses Sample time, etc. on profile export as that
is the naming we use on import as well.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need a special case to import tags on our own CSV export as there is
no field separator at the end of the line.
See #814
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Discarding header lines was faulty as the test whether dive number was
numeric did not work properly.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Use tab as separator when exporting dive details to CSV file. This also
replaces tabs and line feeds from notes with spaces.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I am a bit baffled as to how this used to work before and does not work
anymore. Anyway, it should be sufficient that we take the quoted text
without verifying that the next character is the field separator. (Of
course it would be better to make sure field separator follows, as then
quotation marks could be used in the free-form texts.)
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch only implements the feature, indentation fix is to follow.
This ensures that the actual change can be more easily reviewed.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to have empty field printed for every value on the CSV export.
Hopefully this is enough.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the cylinder size seems to be in the form of ALxx, LPxx, or HPxx use
that as cylinder description.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This will read duration from CSV in minutes if the dive would be less
than 10 minutes when treating the duration as seconds.
In practice, this means that free-divers cannot import dive duration
properly from CSV, but this should be sensible for scuba divers.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds support for importing multi-line notes field on CSV import.
Naturally the notes filed must be quoted with " in this case.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch uses pre-defined working pressures on cylinders to roughly
calculate the size in liters. Imperial selection is ignored here as we
can use the prefix to detect if the value seems like imperial unit (and
the type of cylinder varies based on location, not divers preference in
unit).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If specific value is not available, we need to have an empty value
instead.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Try to grab pressure information from first DC if it is not manually
entered.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We need to limit the DCs from which we grab the depths. Otherwise, we
end up with too many depth values.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If temperature is recorded by a DC it must be taken from under the
divecomputer tag. However, this will prefer the manually written value
if such exists.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is intended to export all the details that someone might copy from a
paper logbook. We need a matching import template to make this simple.
This hasn't been well tested, I'm sure it will break when elements and
attributes are missing.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds support for importing cylinder information from manually kept
dive logs. However, this cannot be used before GUI counterpart is added.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds support for importing temperatures from manually kept dive logs.
However, this cannot be used before GUI counterpart is added.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The existence of location information was tested incorrectly resulting
in erroneously adding these fields if they were not present.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Having the mix name like EANX34 as cylinder description was apparently
confusing, so switching to 'unknown' instead.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds support for importing cylinder information from at least Xdeep
and Diving Log v 5.0.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
UDDF only supports a specific set of alarms. Some events also don't map
to alarms but map to other types of elements in UDDF.
This patch adds a map of the accepted types. Where a map doesn't exist
the type will not be mapped to an alarm, the option then remains to
map it to another kind of element, in the same way that happened with
headings and gas switches.
This removes the need for the specific exclusion of heading and
gas switch, as they are now simply not included in the map.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Using node() along with the node-set seems to grab the weights properly
for me.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Seems that our UDDF export is adding time after the event name. Thus we
need to add reading the following time as well.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Adjust to UDDF 3.2 specification and use proper tag name for air
temperature.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The switchmix values must be concatenated properly.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This attempts to export only used cylinders to divelogs.de. The
detection is based only on o2 percentage as per our test dives. However,
the new cylinder id would be better, but that does not exist on old
dives.
Fixes#757
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There was a bug when the first sample doesn't contain pressure info.
This fixes that by selecting the first with pressure info.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The XDS schema for UDDF is very sensitive to ordering of elements
so I've rearranged many of them to match. Elements in:
- informationbeforedive
- waypoint
Adjusted namespace of export to correct UDDF namespace.
Updated remaining references to mixes it include prefix 'mix'
Moved equipment from informationbeforedive to informationafterdive *
Change trip ids to generated IDs and updated tripmembership to use
the trip id instead of the name *
* These constitutes a difference in XSD and the documentation. I will
raise these issues with the author.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Removed underscore from buddy name elements
Added 'mix' prefix to gas ids. Ids must not start with a number.
Added mandatory profile data with empty tags.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
XPath was incorrect for parsing divecomputers into the equipment
section, meaning they dont get inserted.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
As with buddies, sites could contain characters which are not valid
in Ids. Also, it is very possible to have duplicate site names.
This uses an XSL generated id to prevent any issues.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is instead of using their names, which may contain illegal
characters.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add name at <generator> level, and add additional <homepage> in
contact tag.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Currently repetition groups are used to group dives into trips. This
is not really correct. Repetition groups should really represent a
group of dives where tissue loading needs to be preserved between
dives (typically the same day).
UDDF has support for trips, using the <divetrip> tags. This is a
bidirectional link between the dives and the trips.
This patch adds support for these trips. However, it leaves in the
repetition groups. Repetition groups may need further consideration.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Sum together all of the weights recored on a dive to use in the
<leadquantity> tag in UDDF export.
Signed-off-by: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous patch would not fill the first name field if there was
no second name. This rectifies that.
Signed-Off-By: Martin Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This theoretically allows one to use format like
1°36'11.711"N 124°46'00.368"E for GPS coordinates. However, in practice
this is not allowed without properly parsing this format in C/C++ side.
This patch changes the export format to UTF8 and improves the location
import by allowing either gps or location attributes to be imported.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The XSLT didn't expect the temperature tag to be within the
<divecomputer> element in the source, so the selection wasn't finding
it.
Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Selection of <cylinder> elements wasn't working where dives are
part of a trip. Change the selection so that it will select all
cylinders whether or not the dive is part of a trip.
Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Due to there being no xsl template for the userID, it ended up getting
inserted at the start of the output. This adds an empty template to
map the <settings> element, preventing this erronious insertion.
Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The dive site structure in the UDDF export was using an old structure
where each site is simply listed as a <dive_site>.
The new structure requires a single <divesite> containing at least one
<divebase> - a base location where you are diving from, and at least one
<site>.
As subsurface only tracks sites, I've created a single divebase to be
referenced by all of the sites.
Note: although profiles in Subsurface can be grouped into trips, these
are groupings of profiles, not sites, and the mapping may not be
simple. e.g. on different trips the sames sites may be visited but a
different base used. Or, different bases may be used on a single trip.
Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Part of a series bringing UDDF export closer to the UDDF standard, as
per www.uddf.org.
Currently when exporting to UDDF buddy entities are created
one-per-unique-combination. This means that a group of buddies on a dive
are exported as a single buddy, with the names comma separated.
This patch identifies all unique buddies, whether used independently or
along with other buddies on a dive. They are then linked independently
on each profile.
It also uses the UDDF standard <link ref=""> instead of
<buddy_ref ref="">
Signed-off-by: Marton Long <martin@longhome.co.uk>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Data read from a divecomputer is moved inside the divecomputer tag
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This tries to grab the used cylinders when in open circuit mode.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Shearwater describes the current mode with tag currentCircuitSetting,
thus we should record the ppO2 only when in CCR mode.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If manual CSV import does not have any dive number, give a default one
so that the dives get import and not silently ignored.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The only place where I'm not sure if there are unintended sideeffects of
changing over to the new domain is QCoreApplication::setOrganizationDomain
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
All recorded cylinders are exported to divelogs.de. This potentially
includes cylinders that have not been used.
The start and end pressure for additional cylinders is taken from the
cylinder information. Main tank gets this information from first and
last pressure reading or from the cylinder information if samples are
not available. This should be ok when there is only one cylinder with
pressure sensor, but does not probably work for people having multiple
sensors.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
