The trip selection code was an awkward layering violation.
Whereas dive selections due to dive undo-commands trickled
down via DiveTripModel-->MultiFilterSortModel-->DiveListView,
for trip editing, the DiveListView directly intercepted the
TripEdited signal.
Instead, mimic the dive-selection code. This is a bit longer
but more consistent and logical. The undo/redo of trip changes
is now also a "programmatical" change of the selection.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
After sending a selection-change signal, there follows a current
dive changed signal. Combine these two into a single signal, since
usually the current dive is changed when the selection is changed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a column to the equipment table that shows if a sensor is attached to a
tank, or which sensors would be available to attach to a tank that currently
doesn't have a pressure sensor associated with it.
Changing the sensor assignement can be undone.
This column is hidden by default as this is a somewhat unusual activity.
Signed-off-by: Michael Andreen <michael@andreen.dev>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In general, replace "dive master" by "dive guide".
However, do not change written dive logs for now. On reading,
accept both versions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We no longer need the remove infrastructure, and the edit nickname function
becomes much more intuitive to use by passing in the dive computer for
which we want to create a nickname instead of the internal index into
the array of devices.
This also removes / simplifies the device list update signals in the
DiveListNotifier.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since switching to the mobile-models and removing grantlee,
DiveObjectHelper was demoted to a thin wrapper around string
formatting functions. The last user was removed in a previous
commit.
It was never a good idea, given QML's strange memory-management.
Let's remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When editing a dive, a DiveObjectHelper of the unmodified dive
was created to compare the edited with the old values. Since
the DiveObjectHelper is used here only as a pointless wrapper
around the formatting functions, call these functions directly.
However, note that the code is in principle wrong since the
change to the mobile-models, which do not use the DiveObjectHelper.
The real fix would be to reload the data from the model to prevent
going out-of-sync with respect to the formatting routines!
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
With the removal of grantlee, this became pointless glue
code. Call the formatting functions directly.
Since the printing code was the only user of CylinderObjectHelper,
remove the whole thing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
At this point (post grantlee), DiveObjectHelper is just pointless
glue code. Let's remove it from the printing code and call the
formatting functions directly. If necessary, move these functions
to core/string-format.cpp.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This was a weird helper object, needed for grantlee. Instead
of storing this object, loop over cylinders and dives directly.
The actual accessor function is unchanged and now generates
a DiveObjectHelper or DiveCylinderHelper for every variable
access. Obviously, this is very inefficient. However, this
will be replaced in future commits by direct calls to formatting
functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The mobile version of the list used string formatting functions
defined in DiveObjectHelper and declared in mobilelistmodels.h.
Very confusing. Move them to a separate source file where - in
the long run - all the string-formatting functions, which
are scattered all over the place, can be collected.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The list of known tank types were kept in a fixed size table.
Instead, use a dynamic table with our horrendous table macros.
This is more flexible and sensible.
While doing this, clean up the TankInfoModel, which was leaking
memory.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
So far, the PreferencesDialog emitted a settingsChanged signal.
This meant that models that listened to that signal had to
conditionally compile out the code for mobile or the connection
had to be made in MainWindow.
Instead, introduce a global signal that does this and move
the connects to the listeners to remove inter-dependencies.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a general dives-imported signal for those cases where we
want to fully rebuild models, notably, the completion models.
The divesAdded signals are too fine, because they are sent
per trip and we don't want to reload these models multiple
times per import.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add commands for deleting devices and editing device nicknames
to include the device-handling in the undo system.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a device_table parameters to Command::importTable() and
add_imported_dives(). The content of this table will be added
to the global device list (respectively removed on undo).
This is currently a no-op, as the parser doesn't yet fill
out the device table, but adds devices directly to the global
device table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add undo commands to add / edit / delete filter presets.
These are styled after the other undo commands: On changes,
the UI is informed by DiveListNotifier signals. Editing is
a simple std::swap of values.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
getFormattedCylinder() is a helper function to format a list
of cylinders. It had that weird logic that it would skip
cylinders without description unless it is the first, which
would instead be written as "unkown".
The reason was the old statically sized cylinder array,
where it wasn't clear if a cylinder was actually in use.
This became obsolete when switching to a variable size
cylinder array. Firstly, all cylinders in the array were added
by the user. Secondly, we now also support dives without
cylinders, i.e. the first cylinder is not any different from
the rest.
Thus, remove the logic and format any cylinder without
description as being of type "unknown".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move this function from maintab.cpp to qthelper.cpp. Since the
functionality was used in numerous places, use the helper function
there as well. This removes a number of inconsistencies. For example,
sometime setTimeSpec(Qt::UTC) was called, even though the
QDateTime object was already created with that time spec.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To reset the core data structures, the mobile and desktop UIs
were calling into the dive-list models, which then reset the
core data structures, themselves and the unrelated
locationinformation model. The UI code then reset various other
things, such as the TankInformation model or the map. . This was
unsatisfying from a control-flow perspective, as the models should
display the core data, not act on it. Moreover, this meant lots
of intricate intermodule-dependencies.
Thus, straighten up the control flow: give the C core the
possibility to send a "all data reset" event. And do that
in those functions that reset the core data structures.
Let each module react to this event by itself. This removes
inter-module dependencies. For example, the MainWindow now
doesn't have to reset the TankInfoModel or the MapWidget.
Then, to reset the core data structures, let the UI code
simply directly call the respective core functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code is rather complex. Firstly, we have different representations
of pictures throughout the code. Secondly, this tries to do add the
pictures in batches to the divepicture model and that is always rather
tricky.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Even though the functionality is seemingly trivial, this is a bit
invasive, as the code has to be split into two distinct parts:
1) Post undo command
2) React to changes to the divelist
Don't compile that code on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These can be useful in a printed divelog, especially if the
log entry is also showing weight and exposure suit.
Signed-off-by: Monty Taylor <mordred@inaugust.com>
This was used by the divelist to check wether a selection change is
programmatical or user-initiated. However, since there is only one
entry point for programmatical selection changes, this is not needed
anymore. Remove it - this removes an inter-module dependency.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a DiveListNotifer::eventsChanged signal, which is emitted when
the events changed. This is very coarse, at it doesn't differentiate
between signal addition / editing / deletion. We might want to
be finer in the future.
Catch the signal in the profile-widget to replot the dive if this
is the currently displayed dive. Reuse the cylindersChanged() slot,
but rename it to the now more appropriate profileChanged().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Do a simple copy & paste followed by a simple search & replace
to generate cylinder undo commands from weight undo commands.
Obviously, this is still missing the necessary code to keep
the dive-data consistent after cylinder editing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The diveListNotifier.divesSelected() signal is used to inform the
models of a selection change. It sent the current dive as a second
parameter. This is redundant, because the only sender of the signal
sets current_dive just before sending the signal. Remove the
parameter, which appears to be an artifact.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We tend to use lower-case filenames. Let's do it for these files
as well. Simple search & replace.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Implement the EditWeight undo command. Since there is common code
(storage of the old weight), this creates a common base class for
RemoveWeight and EditWeight. The model calls directly into the undo
command, which is somewhat unfortunate as it feels like a layering
violation. It's the easy thing to do for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Introduce an AddWeight undo command. This is modelled after the
numerous dive-edit undo commands. The redo and undo actions are
connected to the WeightModel via two new signals, weightAdded
and weightRemoved.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Connect the UI to the underlying dive structure. Enable proper initialisation
and management of star widgets while Information tab is active. Enable undo for
the addtional star widgets.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The way this was accessed via Qt's model semantics was horrible.
This gives arguably more readable code, since we don't have to
shoehorn things through QVariants.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The filter-model was catching dives-added / dives-deleted signals
from the models to keep track of the number of shown dives.
To simplify the data flow, do this directly in the undo-command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinderList() function collects all cylinder descriptions.
Instead of adding all cylinders, then sort, then removed duplicates,
keep a sorted list and only add non-existing elements. Find
existing elements by a binary search.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In getFormattedWeight() and getFormattedCylinder(), the indexes
were passed as unsigned ints. This makes no sense as the only
callers were using signed ints. Change the parameters to signed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The divesEdited signal sends the changed field as a parameter.
Since some undo-commands change multiple fields, this led to
numerous signals for a single command. This in turn would lead
to multiple profile-reloads and statistic recalculations.
Therefore, turn the enum into a bitfield. For simplicity,
provide a constructor that takes classical flags and turns
them into the bitfield. This is necessary because C-style
named initialization is only supported on C++20 onward!
Is this somewhat overengineered? Yes, maybe.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo system sets updates individual dive fields on
redo respectively undo. Make salinity such a field, since
it is changed on replanning a dive.
To do this, break out the "update salinity" functionality
into its own function, add an entry to the DiveField enum
and add the corresponding switch-case.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We'll use them from the model in order to avoid creating this many
DiveObjectHelpers when showing a dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is disabled by default - but when compiled in it makes it a lot
easier to pinpoint why we are creating so many DiveObjectHelpers.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The cylindersObject list was only used by grantlee but not by
the mobile code. Since it is quite heavy, split it out and thus
don't generate it for every dive on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
