The only thing you can do with that thing is screw things up (like
libdivecomputer did). There's no value in tracking the "filler" gas,
since you can always just calculate it from the gases that actually
matter.
So just track Oxygen and Helium - and make sure they have sane values.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Did I just say "In comparison, the libdivecomputer output is nice and
sane"?
It turns out that libdivecomputer has been doing some drugs too when it
comes to gas mixes. Like showing O2 percentages as 255.0% and N2
percentages as -155.0%.
Clearly libdivecomputer uses a 'unsigned char' for oxygen percentage,
and makes "-1" be "undefined". And then it prints that non-existing mix
out, and in the process does MATH on the damn thing ("100-O2") to
"calculate" the nitrogen percentage.
Christ.
Just make the parser silently ignore the craziness, because printing out
"Strange percentage reading -155.0" a few hundred times just doesn't
make anything any better.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The suunto xml is just completely crazy. What's the helium percentage
companion to "o2pct"? Would it be "hepct"? No. It's "hepct_0".
Ok, so they didn't number the first o2pct, which could be seen as sane:
that's the only mix value that should always exist. And they clearly
started their indexing with 0. So with multiple mixes, you'd then
expect "o2pct_1" and "hepct_1", right?
Wrong! Because XML people are crazy, the second O2 mix percentage is
obviously "o2pct_2". So the O2 percentages are one-based, with an
implicit one. But the He percentages are zero-based with an explicit
zero. So the second mix is "o2pct_2" and "hepct_1".
I'd like to ask what drugs Suunto people are on, but hey, it's a Finnish
company. No need to ask. Vodka explains everything. LOTS AND LOTS OF
VODKA.
In comparison, the libdivecomputer output is nice and sane, and uses a
'gasmix' node. Of course, now we have so many different XML nesting
nodes to check that I just made it an array of different noces. That
also allows me to mark the suunto case, so that we only do the "check
for crazy alcoholic xml entries" when it's a suunto file.
The "type of file" thing is probably a good idea for deciding on default
units too. Some day.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I'll start doing some kind of "save unparsed things as extended items"
thing, and the ignore rules were just there to get rid of some of the
noise from early parsing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This requires us to change the way we match things up, because now we
can have things like
dives.dive.sample.event.time
and
dives.dive.sample.time
and they are different things (that "sample.event.time" is a 'time'
property of the 'event').
Now, this is always going to be ambiguous, since our linearized name of
the xml doesn't really care whether it's a xml node "child" or a
"property", but quite frankly, I don't care. XML just isn't worth the pain.
In fact, maybe this ambiguity can end up being a good thing. We will
parse these two different lines of XML the same way:
<dive><sample><time>50</time><depth>10.8</depth></sample></dive>
<dive><sample time="50" depth="10.8"></sample></dive>
and the attribute approach seems to be the nicer one. Maybe I'll use
that for the output format.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The executable is now called 'divelog'. If this gets useful enough to
actually *use*, I guess I'll have to come up with a real name some day.
Add a silly README, rename 'parse' to 'parse-xml'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This tweaks:
- packing to be what you'd kind of expect
- makes the "summary info" always visible
- the "extended info" is now on a notebook page of its own
- dive profile the first notebook page, since the summary
information is visible regardless.
which all just seems a lot more logical.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I'm going to add a menu to import (and eventually export) dives, and so
we'd like to be able to start out with no dives at all. Right now we
croak if that happens - it's not like the code has been written with
actual end users in mind.
So start cleaning things up. First make the 'current_dive' macro work
right even for invalid dives.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I dunno. This seems a better interface at least if we get more info for
the dive, but I suspect I'll want to the add basic info to the profile
page too.
This makes the 'table' approach to layout be kind of pointless again,
and the table has become a fancy vbox. Maybe I'll put the core info
back, and use the notebook 'Info' page for extended information.
I should just bite the bullet and start saving the dive data, and adding
editing functions for adding information. But instead I'm playing
around with random gtk widgets.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's still the ugliest application ever, but now it at least gives you
some basic dive info.
I'd love to add a way to edit the dives to add new data (name, buddies,
location etc), but that would also require the ability to save the end
result. Maybe some day.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we see samples from past the dive duration, update the dive duration.
Likewise with maxdepth.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The time minimum was in seconds, not minutes, and we really do want to
show at least to 90ft to make shallow dives look shallow rather than
scaled to some full depth.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It should have depth, time, place etc information, but right now it only
has a fake depth that doesn't even get updated. Just to show the idea
of the table usage.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We'll want to add various dive statistics, so... Without them, it all
looks pretty much the same, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. and repaint the profile when the selection changes.
Now, if it just wasn't so ugly, it might even be useful. Except it
obviously needs to also show all the other dive information. And allow
the user to fill in details. And save the end results.
So no, it's not useful.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is all kinds of broken: it doesn't actually follow the selected
dive, and the profile isn't scaled properly etc. But it shows something
new, and not just text.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The "decimal: it's meters, integer: it's feet" logic doesn't work. It's
just always meters, because the xml ends up sometimes having whole meters.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This means you can actually see them all, and walk through them.
It doesn't make any of this *useful*, but whatever.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ok, so I'm not very good at this. I'll need to enclose the dang thing
in a scrollable window, and then make that scrollable thing just part of
the whole window.
But hey, it's pixels on the screen. Pixels that show the names of the
dives we've parsed. At least as many as will fit on screen at one time ;)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The name is a string containint date, time, depth and length. So it's
useful even with nothing else going on.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The dive parser should eventually be just a part of the program, not the
whole thing. So start preparing for that.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Show date, max depth, and time by default. The stuff that matters and
should always exist.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. and fix the 'duration' parsing: it can be either in seconds, or in
mm:ss format. Floating point doesn't make any sense.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This makes it much easier to see the duplicates, but more importantly,
we do need to actually save the dives off to do any real work with them.
Also, require a verbosity level of 1 (-v) to show all the samples.
While (-vv) shows unparsed entries.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I think this gets me dates on all my dives. So now I could start
sorting them and removing duplicates.
But before I try to remove dups, I guess I should compare the
libdivecomputer ones against the suunto ones. Because I bet they have
various "interesting" issues like using Bar vs Atm etc.
"But XML is portable". Crazy people.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. which also showed that the sampletime thing had gotten a bit too much
copy-paste from the temperature parsing ;)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that we actually parse some of the dives, don't spam stdout with the
list of stuff we can't parse by default.
Add a 'verbose' flag, which enables that output when set.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. nice compiler warning hidden by the crazy gcc pointer sign warnings
that nobody wants to see (yes, we really do want to do 'strlen()' even
on unsigned strings, don't complain, crazy bitch compiler).
So this also makes our CFLAGS set -Wno-pointer-sign.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(ie all of them)
This also shows the type of entry, which makes it clear that I've
screwed up the sample matching. Oh well.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. but don't actually parse anything yet. But hey - now it tells you
how many samples it (hasn't) parsed.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ok, so we have the dive split and the sample splits, so now we could
really just start filling in data.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
