This makes better use of the screen real estate, without (IMHO) seeming
too crowded. This is a tough balance to strike.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Our labels all seem to have a lot of empty vertical space around them.
Try to be a bit more conservative with space.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
By default single line text has too much white space around it. This
smaller, denser label works well to more efficiently use screen real
estate, I think.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This warning is unnecessarily scary - we had a problem with parsing
multiple strings on the same line, but it should be all solved, and
while it does mean that people may have old incorrect git save files
with empty strings, scaring users about it isn't going to help.
And with the warning removed, we can just remove the whole test for an
empty string, because the normal code sequence handles that case just
fine.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Number 3 overall committer with currently 9% of total commits and 27% of all
commits in the last three years.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The tags of the dive site were shown/hidden when changing the
current dive.
Thus the following could happen:
1) User changes to dive with no tags. Tags are hidden.
2) User add image, which creates GPS tag
3) Tag is updated but not shown.
Fix this by showing/hiding tags when they are calculated not
when switching the dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When adding a picture with GPS information, a dive site was added
if the dive didn't have any. The dive site had the empty string as
name, leading to a confusing UI experience.
We could catch the empty string at numerous places and replace it
by some dummy string. This commit goes the distinctly less invasive
route and adds the dive site with the "unnamed dive site" string
(translated to the user language) as name.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This switches us to the DS9 branch. Yeah, that's what came after Next
Generation. Anyway, this is a clean rebase on top of current upstream
libdivecomputer master, which makes for a much cleaner history.
Also merges updatream updates from Jef Driesen:
- work around Pelagic BLE oddity (Oceanic Pro Plus X and Aqualung i770R)
- OSTC3 firmware update improvements
Use a more robust command to write flash memory
Read and cache the firmware version information
Add an extra delay after writing to the flash memory
Add an extra delay after erasing a flash memory page
Send the service init command one byte at a time
Fix some typos in the comments
Ignore excess bytes in the BLE version packet
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is completely irrelevant, however out of principle,
let's free the tab-widgets at the end of the application.
To do so, use Qt's object hierarchy. I'm not a fan of this
kind of memory management, but it is how it is.
Moreover, remove the explicit constructor of MainTab, since
it doesn't differ from the default constructor anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Clearing displayed_dive here makes no sense for two reasons:
1) This is only called on startup, when displayed_dive is not
yet initialized.
2) The tab-widgets don't use displayed_dive anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code used displayed_dive. However, virtually all the
displayed data is now derived from current_dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the displayed data is extracted from current_dive it makes no
sense to query displayed_dive for the dive mode.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If current_dive was not set, the code would clear the tabs
right after updating the data. We might just as well set the
data only if current_dive is set.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This used the displayed_dive object. However, we now use current_dive
to designate the currently displayed dive. Thus, use this instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should have been converted a long time ago.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The goal here is to remove a dependency on displayed_dive.
While doing so, make the model more general and display any dc.
Pass in the dc of the current dive instead of displayed dive,
since all other tabs are already converted to show data of
the current dive. The QStrings are cached since we generate
them anyway, so we may just keep them. Thus, there is no
danger of the dc becoming invalid.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of assigning to a ret variable and returning at the
end of the function, return directly from the various switch
branches. This is more idiomatic and consistent with the other
models.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As we do in most other models, use begin/endResetModel() to
reset the model. This is distinctly less errorprone than
the add/removeRows() version as we don't have to check for
empty ranges, etc.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To reset the core data structures, the mobile and desktop UIs
were calling into the dive-list models, which then reset the
core data structures, themselves and the unrelated
locationinformation model. The UI code then reset various other
things, such as the TankInformation model or the map. . This was
unsatisfying from a control-flow perspective, as the models should
display the core data, not act on it. Moreover, this meant lots
of intricate intermodule-dependencies.
Thus, straighten up the control flow: give the C core the
possibility to send a "all data reset" event. And do that
in those functions that reset the core data structures.
Let each module react to this event by itself. This removes
inter-module dependencies. For example, the MainWindow now
doesn't have to reset the TankInfoModel or the MapWidget.
Then, to reset the core data structures, let the UI code
simply directly call the respective core functions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the profile does not listen to DivePictureModel resets anymore,
the pictures weren't cleared when clearing the canvas. Do this
explicitly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We show an icon whether there are pictures and whether they are
before or after the dive. Thus, the list models must emit the
proper signals when the pictures of a dive change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is a bit hairy, because two things might happen if the
picture has a geo location:
- A dive gets a newly generated dive site set.
- The dive site of a dive is edited.
Therefore the undo command has to store keep track of that.
Oh my.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the two functions create_picture() and picture_check_valid_time()
from dive.c to picture.c.
This might be somewhat questionable, as these functions are not purely
picture related, but check the nearest selected dives, etc. However,
dive.c is so huge, that slimming it down can't hurt. Moreover,
getting the nearest selected dive is more divelist- than dive
functionality anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If we want to make addition of pictures undoable, then create_picture()
must not add directly to the dive. Instead, return the dive to which the
picture should be added and let the caller perform the addition.
This means that the picture-test has to be adapted.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We can do the same with get_picture_idx(). Yes, it is a bit more
unwieldy. However a full reimplementation seems not worth it.
We could make this a one-liner helper function though.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code is rather complex. Firstly, we have different representations
of pictures throughout the code. Secondly, this tries to do add the
pictures in batches to the divepicture model and that is always rather
tricky.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
QVector doesn't have a function to insert a range of pictures,
which we will need for undo of image adding/deletion.
Moreover, std::vector gives us stronger guarantees. For example,
if capacity is large enough, it guarantees that there will be
no reallocation and thus iterators stay valid. I have not found
such a guarantee in the Qt docs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
By using a std::string instead of a C-string, memory management
becomes so much simpler! This class will be used for keeping track
of deleted/added pictures in the undo system.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
An empty class that was not used anywhere. This allows us to
remove a few include files as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
TabDivePhotos::saveSubtitles() had an unused local variable.
Clearly a copy&paste oversight.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It makes no sense to have the view in item-selection mode, since
each picture represents a row. Thus we can remove a few lines
of code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
dive-pointers are stable and the dive picture model is reset
if a selected dive is removed, so there is no risk in keeping
pointers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Even though the functionality is seemingly trivial, this is a bit
invasive, as the code has to be split into two distinct parts:
1) Post undo command
2) React to changes to the divelist
Don't compile that code on mobile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This needs a slight change to the macro, because here we sort by
value type. Yes, from a C-programming point of view this is horrible,
however a decent compiler should just inline everything and not
pass around value types.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
A function that gets the index of a picture in a picture table
given its filename. Since we are going to identify pictures by
their filename, we will need this function in the undo code.
Use the function in the remove_picture() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For consistency with equipment, use our table macros for pictures.
Generally tables (arrays) are preferred over linked lists, because
they allow random access.
This is mostly copy & paste of the equipment code.
Sadly, our table macros are quite messy and need some revamping.
Therefore, the resulting code is likewise somewhat messy.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since this doesn't touch struct dive, dive.c is not an appropriate
place for this function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For undo of picture manipulation, it will be crucial that the
model and the core have the same order of pictures. The first
sort criterion will be time, the second filename in the case
that two pictures have, for whatever reason, the same timestamp.
However in the core we us C-strings and thus sort byte-wise
using strcmp. In the Qt-part we use QStrings, which sort according
to unicode encoding. To enable consistent sorting, change the
Qt-part to std::string, which uses a C-style 0-terminated string
as its backing store.
One might argue that in general filenames should use system-encoding
and therefore use std::string instead of QString. However, a
broader conversion to std::string turned out to be very painful,
since Qt is (deliberately?) difficult to use with std::string.
Notable all the file-manipulation functions don't take std::string
by default. Thus, this commit only converts the internal data
of DivePictureModel, but continues to use QString for the Qt-facing
interface.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The date and time fields of the main tab posted undo events
for every date/timeChanged signal. Thus, when changing the
day of the month to e.g. 21, this would result in two date
change events: one to the 2nd and one to the 21st. This is
very irritating.
Instead listen to editingFinished() events, which thankfully
exist for these widgets.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinder-based statistics where not updated when an undo
command edited cylinder data. Do so.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The SAC rate, etc were only updated when switching between dives.
They should always be updated when an undo command changes (adds,
edits, removes) the cylinders of a dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To display changed SAC values it is necessary that the models
emit changed signals when cylinders are edited. An alternative
might be that the undo commands emit dive-changed signals themselves.
Fixes#2814.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We have to call update_cylinder_related_info() when adding /
editing / removing cylinders. This could be done in a common
base class of the commands. For simplicity, let's call
the function in the respective undo()/redo() functions.
Partially fixes#2814.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
While this worked well on Mac, it creates odd errors on Linux. This
doesn't seem worth spending too much effort on - so let's just go back
to asciidoc.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
