data pointer is not used, so it can be safely removed.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
OSTCTools is a windows based software by Robert Angeymar which performs
configuration upgrade, memory analysis and download tasks for H&W OSTC
devices.
Downloaded dives are stored in files (one archive each) with the raw
binary data heavily padded at the begining of the file, and some other
data not included in H&W dive header protocol as the device's serial
number.
The import function simply takes the raw data part of the file and lets
libdivecomputer do the parseing.
Then adds some additional info as OSTC reported dive number and serial
device number.
Please note that OSTCTools is *not* a real logging software, it simply
gets the DC raw data, so there isn't any information about dive site,
equipment and so.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Move extern declaration of function datatrak_import() to file.h, where it
fits better than in file.c
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add function libdc_buffer_parser() intended to parse raw data buffers
prepared for libdivecomputer. We have to commit elsewhere the necesary
assembly tasks to achieve consistent data.
Actually only OSTCTools import makes use of this feature. Uwatec families
have been included as I expect to make use of this function for sample
parsing in datatrak import (and, may be in a far future, smartrak).
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
dive_cb() needs a defined device to work as it's built for DC download
tasks.
Move part of the functionality of dive_cb() to a new function
libdc_header_parser() which can be used to parse headers from raw data
buffers with no device set.
Obviously dive_cb() will call the new funtion for header parsing too.
Two changes in logic:
1- In parse_gasmixes() set data pointer to NULL. This pointer is passed to the
function, but it's not used. While this data pointer exists in DC import, via
dive_cb(), it doesn't in file import as data has previously been set in the
parser.
2- While parsing gas mixes do not return on rc = DC_STATUS_UNSUPORTED because
it would end our dive parsing just if the device doesn't support gases, which
seems undesirable in both, DC or file import.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Taken as is from libdivecomputer exaples/common.c to improve verbosity
on libdc return codes.
Intended to be used on error messages shown to the user on main window
complementarily to those messages managed by dev_info().
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While downloading from DC the user sets the vendor and model. In
imports, this is not possible. The parser has to figure out somehow at
least the dive computer model used in a dive basis, as it can even change
over time, and a log file can include several different models.
We will use this structure in import tasks to ensure that data
passed to libdc are consistent with what it expects to find.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If there is valid gas information (cylinder size and starting pressure),
also ascent before gas runs out (taking a 40bar reserve into account).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adopts the planner to the needs of the recreational diver. Rather than immediately
starting to ascent doing deco stops this mode, this mode stays at the last manually
entered depth for the maximal time before mandantory stops appear (NDL). It does not
change gas but keeps using the last used cylinder.
TODO: * Grey out unused UI elements of the planner in this mode
* Start ascent before gas runs out (or into reserve)
* Do a 3min @ 5m safety stop.
Fixes#840
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Silly cmake doesn't allow a target to depend on the install target. This
ugly hack appears to be the recommended workaround :-(
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The previous attempt to install them was completely bogus as it only
worked when the source directory had previously used for an in-source
build using qmake.
Oops.
With this change we now create the translations in the build directory and
install them from there.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
NL should be set only if there is an empty line in the input file. That
way the return if no empty line exists (simplistic test for Seabear CSV
file) makes more sense.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Once a manually added dive is part of a trip and this trip
is edited, applying the modifications leaves the dive profile
in edit mode (e.g. points can be dragged and gas swapping can
be applied).
The issue can be viewed from another angle. Why enable
profile edits of a manually added dive which is in a trip,
while the trip is being edited in the first place?
If there are more than one manually added dives in said trip
we are enabled to edit one of the dive but probably
it's not intended to modify all manually added dives after the
changes are applied for the trip.
This patch disables the functionality in question and it also...
Fixes#864
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
once the manual added dive is added it can't be edited directly, This
can be fixed by adding an edit button to the log menu, this will be
consistent with the plan/replan buttons.
Fixes#847
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
- don't reference .so files, reference libraries
- handle libdivecomputer just like the other libraries
- add the ability to link libdivecomputer statically
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This adds to the prefs struct the variables last_stop, verbatim_plan,
display_runtime, display_duration, and display_transitions from the
planner so their values are saved from one session to the next.
The widgets for some of those settings had default values in
plannerSettings.ui; remove them since the new code in
subsurfacestartup.c takes care of initializing them.
Signed-off-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
fixes the wrong behaviour as dive details must not be closed when
hyperlinks are clicking, So check for Hyperlinks before toggling the
dive.
Fixes#713
Signed-off-by: Gehad elrobey <gehadelrobey@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Non-static class member recalc is not initialized in the constructor
Signed-off-by: Marcos CARDINOT <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Non-static class member multipart is not initialized in the constructor
Signed-off-by: Marcos CARDINOT <mcardinot@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Free the buffer before terminating the process.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The result of byte_to_bits should be freed by the caller.
This patch frees the memory allocated by that function.
Also there were some memory leaks in data_import and
read_file_header functions when an error occured.
Signed-off-by: Claudiu Olteanu <olteanu.claudiu@ymail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Show error messages in main window, instead of stdout.
Use translated strings.
Remove redundant error message.
Signed-off-by: Salvador Cuñat <salvador.cunat@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The extra call "dosomethingelse()" is added with the
intention that user will not be confused to add braces
around single lined "if" conditions.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
