Use CSS styling to format the dive plan instead of deprecated HTML tags.
Also make sure that we aren't sending HTML tags to translate()
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Lets just use pO₂ instead of PO2, ppO2, ppO₂, PO₂.
They all mean the same, but it's better to be
consistent
Signed-off-by: Henrik Brautaset Aronsen <subsurface@henrik.synth.no>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Not having a format string that explicitly references the arguments is
considered a potential security issue in code.
This gets rid of a compiler warning that turned into an error on Fedora 21.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
"warning: 'bottom_time' may be used uninitialized in this
function"
we set it to zero for now.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should either use mplicit struct initializers (empty braces { }
or double braced zero {{ 0 }}) or memset the struct.
Signed-off-by: Lubomir I. Ivanov <neolit123@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Strangely, *prinf() on Linux appears to do the right thing in either
order (my guess is based on the type of the two values?), but on Windows
things go badly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Triple time step in deco ascents to improve responsiveness of interactive
deco calculation.
[Dirk Hohndel: split commit into two]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
dump_plan wasn't updated when the switch from he/o2 to gasmix was done
in the planner code, this makes it compile again.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Don't show a stop if we continue at this depth.
This resolves a problem when there are more than two waypoints during deco
at the same depth. This can happen at 6m when there is a gaschange to O2
and the last stop depth is 6m (which turns the 3m stop into another 6m
stop).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes the 'segment' durations equal the runtime differences even when
we don't display transitions in deco.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This was only semi-implemented the first time around. Now we really only
copy the ones that are indeed used.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This makes things more consistent. The equipment view and the sample view
of the beginning and end pressure for each cylinder correspond (and the
beginning pressures of each cylinder segment are correctly reflected in
the samples).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
1) All the variables in the sample structures are strongly typed
2) Two additional types were declared in units.h:
o2pressure_t
bearing_t
3) The following variables were added:
diluentpressure
o2setpoint
o2sensor[3]
4) Changes to a number of files were made to chanf
sample->po2 to sample->po2.mbar
bearing to bearring.degrees
Signed-off-by: Willem Ferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Gas changes (can) have a bogus waypoint following at the same depth with 0
time. Those were confusing the decision whether to show a waypoint.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
There are new check-boxes to modify the look of the diveplan in the notes.
The old behaviour appears with "verbatim display", others are shorter,
runtimes, stoplengths and transitions being optional. Also round to full
meters and minutes to remove optical clutter.
To be done: Remember these setting in the config.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Every single user of the get_gas_name() function wanted to just use the
result to create a message or printout, and that made the interface a bit
cumbersome.
This adds a "gasname()" wrapper that returns a static buffer with the
result in it, which is neither pretty nor thread-safe, but is a much
simpler interface to work with.
Our dive planning isn't multi-threaded, so nothing should care.
[ This also converts a few open-coded gasname debug printouts to use the
helper function, resulting in prettier printouts and less code ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This changes the divedatapoints and functions that deal with them.
It changes plan_add_segment(), create_dp(), gasToStr(), and tankInUse() to
consume gasmix instead of o2/he.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is step one of many to use gasmix instead of int o2/he.
Right now some of these changes look ridiculous because after changing a
few lines we immediately go back to o2 = get_o2(gas). The reason is that I
wanted to convert a hand full of functions at a time. So in this commit I
only change validate_gas(), get_gas_from_events() and get_gasidx() to use
a struct gasmix instead of int o2, int he.
This state builds and survived some mild testing. Let's continue on top of
that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We should never pass permille values around as integers. And we shouldn't
have to decode the stupid value in more than one place.
This doesn't tackle all the places where we access O2 and He "too early"
and should instead keep passing around a gaxmix. But it's a first step.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This part of the algorithm was off as part of it (but not all of it -
crazy, I know) assumed the old semantic for gas changes where the new gas
was introduced at the end of the segment and not at the beginning.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We tracked gas used by simulating a dive with a cylinder - but for that we
need a cylinder size and working pressure. If the user just enters a gas
but no cylinder data (likely in order to figure out how much gas is used
so that she then can pick a big enough cylinder), we didn't show any gas
consumption.
It kinda sucks to add another member to the cylinder structure, but this
seemed far more reasonable then some other, global structure that
independently tracks gas usage. This just seemed to make sense.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Gas switches are now for the current segment, not for the next.
We can only track gas for cylinders for which we have size / working
pressure information. Print a warning for others.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we have size information including working pressure for a cylinder, we
already track the expected pressure at each way point - this way we can
also alert the user if more gas is consumed than is available in the
cylinder.
This does not include sound planning strategies like "rule of thirds". It
simply assumes that you won't be able to breathe down the cylinder past
about 10bar (using 0 as cutoff seemed silly).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We want the disclaimer in the final dive that can be printed, but it's
distracting when shown while planning the dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Silly bug - while we normally fill the cylinders in a tight group with no
"null" cylinders in the middle, since we copy from an existing dive and
since that may end up with an odd sequence of cylinders, we need to
continue looking at ALL cylinders and not stop with the first one that's
empty.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In analyze_gaslist() we were only keeping gases that had their .depth
above the current depth, i.e. where we could switch to in the future. Now
we take note as well of the strongest gas that we could have already
switched to and switch to it before we attempt to ascend.
[Dirk Hohndel: minor whitespace and code cleanup]
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This commit is a little bigger than I usually prefer, but it's all
somewhat interconnected.
- we pass around the cylinders throughout the planning process and as we
create the plan we calculate the gas consumption in every segment and
track this both in the end pressure of the cylinder and over time in
the samples
- because of that we no longer try to calculate the gas consumption after
being done planning; we just use what we calculated along the way
- we also no longer add gases during the planning process - all gases
have to come from the list of cylinders passed in (which makes sense
as we should only use those gases that the user added in the UI or
inherited from a the selected dive (when starting to plan with a dive
already selected)
With this patch I think we are close do being able to move all of the
planning logic back into the planner.c code where it belongs. The one
issue that still bothers me is that we are juggling so many dive
structures and then keep copying content around. It seems like we should
be able to reduce that.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
We don't want to do this when calling plan() from createTemporaryPlan() -
we only want to record the dive at the end of createPlan().
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This patch paints the dive red if the user is breaking ceiling
on the planner - it's quite fast, it analizes the depth over the
max(tissue_1 .. tissue_16) and changes the color of the profile.
Signed-off-by: Tomaz Canabrava <tomaz.canabrava@intel.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
