3629a87 changed the handling of cylinders in multi-dives edit.
Not only should the cylinders be the "same", but also at the
same position. The code did not check whether the edited dives
even had that many cylinders, leading to a null-pointer
dereference.
Check whether the cylinder exists before comparing it.
Fixes#3578.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Also allow editing sensor on a cylinder with already attached sensor.
This will swap the sensor data with the cylinder that it is taking the
sensor data from, removing the need for adding an extra temporary
cylinder when swapping two sensors.
Signed-off-by: Michael Andreen <michael@andreen.dev>
The last caller of find_cylinder_index() was removed in
3629a87fcc. Also remove functions that where only called by
this function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of trying to find matching cylinders, trigger on the cylinder
number first and then only edit that n-th cylinder if it matches the one
in the current dive.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Need to save the current dc as a member variable so we can apply redo
and undo to the correct dc later.
Signed-off-by: Michael Andreen <michael@andreen.dev>
Add a column to the equipment table that shows if a sensor is attached to a
tank, or which sensors would be available to attach to a tank that currently
doesn't have a pressure sensor associated with it.
Changing the sensor assignement can be undone.
This column is hidden by default as this is a somewhat unusual activity.
Signed-off-by: Michael Andreen <michael@andreen.dev>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
It is confusing when undoing a command and nothing happens
in the UI. Therefore, switch to the corresponding dive when
undoing/redoing a replan or profile edit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These two actions were using the same command with a flag
controlling the name of the command, which is shown in
the undo menu.
However, the replanDive does much more (such as changing
the notes) and in the future we may want to be more
fine-grained with respect to profile editing. Therefore,
split these commands into two separate ones.
Moreover, make the editProfile command more flexible.
Pass an enum describing the action instead and also
a counter indicating how many points have been
moved or removed.
Finally, don't consume the input dive in the editProfile
command, because we will want to keep the original dive
while editing the profile.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In general, replace "dive master" by "dive guide".
However, do not change written dive logs for now. On reading,
accept both versions.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
User report: when switching focus between windows, the
cursor position gets lost. This is due to a note-edit
command being fired, which then overwrites the notes tab.
To prevent this, don't update the notes field when placing
a command. Moreover, generally don't update the dive
selection when placing a command as that also rewrites all
the values.
Should this be extended to other fields?
Fixes#3365
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
All data access is now directly via the plot_info structure
owned by the ProfileScene itself.
Also removes DivePercentageItem::hColumn, which was an
artifact from the DivePlotDataModel.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
'constexpr' implies 'const' since it is a stronger guarantee,
so let's remove the redundant 'const'.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When adding a cylinder, it was added at the end of the list.
This would make hidden cylinders visible as the new rule is
to only hide unused cylinders at the end of the list.
Therefore, add the cylinder after the last used cylinder,
i.e. before the first hidden cylinder.
This means that the position where the cylinder is added has
to be hidden in the undo command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo commands for depth and duration editing cleared
the samples of the dive computer. They relied on the profile
automatically creating a fake profile. However, at some point
that code got removed. Therefore, do it explicitly in the undo
command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Removal of a cylinder requires a renumbering of
cylinders in the core data structures (samples, etc.).
The renumbering was performed in the undo-action of
cylinder removal, but not during actual cylinder removal.
What a mess!
Add the missing call.
Attention: this makes the deletion of sensor-readings
on cylinder-deletion non-undoable!
Undo will have to be fixed in upcoming commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is adding the capability to select 'Dive number' and 'Date / Time'
in the 'Copy dive components' dialog, and then copy them into the
clipboard.
When using 'Paste dive components, these values will then be pasted into
the selected dive(s).
This is intended to help with workflows that import dive information
from two different sources, like general information from another
logging program, and CCR ppO2 sensor readings from a unit log, and then
stitch them together into one cohesive entry with all data per dive.
Copied data is also output into formatted text when pasting the
clipboard outside of the application:
```
Dive number: 401
Date / time: Sun 2 May 2021 12:00 AM
```
No translations have been added as of now - I could not find any
information on how strings are translated for this project.
Signed-off-by: Michael Keller <github@ike.ch>
The AddWeight, RemoveWeight, EditWeight and ReplanDive
commands were missing invalidate_dive_cache() calls.
Add them to ensure that the dives are written to git
logs on save.
Fixes#3150
Reported-by: Peter Zaal <peter.zaal@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Otherwise we end up showing the gasmix in a different form after editing
for the usual air percentages, because we haven't normalized the gasmix
values and store them back in the dive in the non-normalized format.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The list of known tank types were kept in a fixed size table.
Instead, use a dynamic table with our horrendous table macros.
This is more flexible and sensible.
While doing this, clean up the TankInfoModel, which was leaking
memory.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We need to always call the tr() function of the base class. This will have
consequences for our translations.
See: #3068
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Annoyingly, the replacement has only been available since Qt 5.14.
To make the code less messy, implement our own stdToQt conversion helper.
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
get_cylinder(d, i) is more readable than d->cylinders.cylinders[i].
Moreover, it does bound checking and is more flexible with respect to
changing the core data structures. Most places already used this accessor,
but some still accessed the cylinders directly.
This patch unifies the accesses by consistently switching to get_cylinder().
The affected code is in C++ and accesses the cylinder as reference or
object, whereas the get_cylinder() function is C and returns a pointer.
This results in funky looking "*get_cylinder(d, i)" expressions.
Arguably still better than the original.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We have to call update_cylinder_related_info() when adding /
editing / removing cylinders. This could be done in a common
base class of the commands. For simplicity, let's call
the function in the respective undo()/redo() functions.
Partially fixes#2814.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This will be temporarilly used by the planner to mark consumption of
air at the surface. Do this by creating a new function add_cylinder,
which replaces add_to_cylinder_table() and takes care of always adding
a dummy cylinder at the end of the table. Make the original
add_to_cylinder_table() local, so that it cannot be accessed anymore.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When pasting cylinders, the destination dive got a verbatim copy
of the cylinders of the source dive. This is not what users want:
for example, the start and stop pressures from the dive computer
as well as the gas mix may be overwritten.
There seems to be no perfect solution, since some times users may
want to paste the gas-mix.
Therefore, let's choose a heuristic approach for now (in the future
we might implement a UI-flag):
When copying over existing cylinders, only copy type and maximum
pressure.
When adding new cylinders (i.e. from-dive has more cylinders than
to-dive), copy everything, but reset start- and top-pressure to 0,
which represents unkown.
Moroever, in the latter case, set "manually added" to true, since
obviously this wasn't added by a dive computer.
Fixes#2676
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Don't overwrite the full cylinder when editing a single field.
Implement three "modes": editing of type, pressure and gasmix.
Don't consider individual fields, because some of them are
related. E.g. you can change the gasmix by setting the MOD.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We stored only one cylinder in EditCylinderBase, which is the
base class of RemoveCylinder and EditCylinder. This turns out
to be too crude: when removing the "same" cylinder from
multiple dives, there are some "hidden variables" such as
bestmix_o2 or manually_added, which might actually be different.
We don't want to overwrite those on undo of delete.
Moreover, the cylinder edit is way too crude at the moment,
as it overwrites the whole cylinder even when the user edited
only a single field. To enable a more refined edit, we have
to store each changed cylinder.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently we use the same_cylinder() function to determine
which cylinders should be edited in a multi-dive edit. Make
this more flexible by introducing a flag-set, such that
the undo-command can select which cylinders are considered
as equal:
- same type
- same pressure
- same gas mix
- same size
Currently both undo commands use same type, pressure and
gas so that the behavior stays unchanged.
The future goal is to split the cylinder-edit undo command
into different commands so that when, for example, editing
the type only the type is considered by not the gas mix.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The undo-code must take care not to remove used cylinders.
To do so, extend the constructor of EditCylinderBase,
which collects the cylinders and dives to edit, by the
"nonProtectedOnly" boolean argument. If true, only those
cylinders for wich "is_cylinder_prot" returns false
will be added.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinders in the events must be reordered if we remove
a cylinder. To avoid duplication of code, move the reordering
function into qthelper.cpp, though it might not be ideal
there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Do a simple copy & paste followed by a simple search & replace
to generate cylinder undo commands from weight undo commands.
Obviously, this is still missing the necessary code to keep
the dive-data consistent after cylinder editing.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When editing the dive site of a dive, the dive-table of the
corresponding dive site was not properly updated by the undo
commands. Try to get this right.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Do this in analogy to other types. However, here we have to convert
from / to QString. We could do this in an even more general way
by using two templat parameters: one for the Qt type, one for the
core type and define conversion functions. However, let's not do
this for now.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Some dive-editing undo commands have trivial setter and getter
functions: they simply read and write a struct dive member.
Autogenerate these in a template to which we pass a pointer
to member as template argument.
For the invalid-flag we have to turn the edit command from int
to bool, since that is how the flag is store in the dive struct.
Sadly, quite a number of the setters do funky things and we
cannot autogenerate them.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Most edit commands derive from a common base class EditBase,
which declares a fieldId() virtual function that has to be
defined by the child classes. This is tedious. For some reason
the C++ makers refuse to allow "virtual member constants".
To make the code somewhat less verbose, create these functions
by a template. Of course, we could introduce the template
parameter directly in the EditBase class. However, that would
mean that the code in this base class is generated for every
single undo command. I'm not sure we want that.
This should als make it somewhat less tedious to create new
edit commands by copy & paste.
We could do the same for the fieldName. However, that is more
complicated for two reasons:
1) For historic reasons(?) C++ doesn't allow for string literals
as template parameters. Therefore, arrays-of-string would have
to be defined, which is not very nice.
2) We would have to make sure that these strings are recognized
by Qt's translation machinery and use the QT_TRANSLATE_NOOP
macro, which makes the whole thing even less attractive.
Maybe later.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In the mobile version of the dive-editing command, the fulltext
filter was not updated. Thus, when editing a dive while the filter
was active, the dive would disappear.
Unregister the old and register the new version.
Reported-by: Chirana Gheorghita Eugeniu Theodor <office@adaptcom.ro>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When editing dives, the undo-command sends a filte changed signal.
The models catch the signal and check whether the filter status
changed.
The mobile-version of the dive-edit command simply exchanged the
dives. This could lead to inconsistencies when the filter flag
was overwritten. Therefore, make sure that the filter flag
is not overwritten by the dive-exchange.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The way inheritance is implemented for the undo commands confuses the Qt
translation tooling - with the result that the context assumed by the
tools used to extract the strings doesn't match the context calculated
at runtime - so all the translations for the strings in undo commands
fail (including creating proper numerus forms).
This change forces a consistant context tag, at the price of creating a
significant delta for the source strings (the strings themselves stay
the same, but the context for a lot of them changes). I am hoping that
Transifex is smart enough to automagically add the correct translations
for these, but I guess I won't know until I try.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
In edit commands, the fulltext might have changed and therefore
we have to update the fulltext index.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Grammar-nazi ran
git grep -l 'indexes' | xargs sed -i '' -e 's/indexes/indices/g'
to prevent future wincing when reading the source code.
Unfortunatly, Qt itself is infected as in
QModelIndexList QItemSelection::indexes() const
Signed-off-by: Robert C. Helling <helling@atdotde.de>
For many of the commands it is fairly easy to add information that makes
it easier to figure out what actually happened. That's especially true
for commands operating on dives. Trip and dive site edits haven't been
given these more elaborate undo texts (yet).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Command that just swaps two dives. This is rather complex,
as for example a dive site might be created.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
At least in those cases where we are sending a divesChanged signal we can
easily check if the cache was properly invalidated. Of course this won't help
in cases where we don't notify the dive list about changes, either.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
