When editing a dive on mobile we might have to create a new
dive site. That site is added to the global dive site table
in the undo command. However, the code in QMLManager created
the dive site with create_dive_site*() functions, which already
adds it to the table. The undo command then added the dive
site again leading to a hang of the application.
To solve this problem, create new alloc_dive_site*()
functions that do the same as create_dive_site*()
but do not add it to the table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This makes sense because USB devices will only show up when connected,
while BT/BLE will get listed once they are paired, even if not currently
connected. So the higher likelihood of being the device a user is looking
for is for any USB devices that show up, so those should go first.
Suggested-by: Christof Arnosti <charno@charno.ch>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of relying on the std::vector staying unchanged and not freeing
its members, instead keep a copy of the object in our DCDeviceData class.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If the user tries to download from a device that he hasn't given the app
permission to read from, Android will pop up a dialogue asking for that
permission. With this after giving the permission we continue (well,
technically, restart) the download which is likely the expected behavior.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This way even if a USB device wasn't added through an Android intent, we
still have a way to scan for it and select it. This is especially
important in case a user has a cable that we haven't seen yet (i.e. with
a VID/PID that we haven't added to Subsurface-mobile), but that
nevertheless works with the android usb serial drivers.
This also makes the flow a little more logical / consistent when
deciding which connections to show.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This finally allows us to download from not just the first device, but specifically
the device that the user picks.
Passing the object through a void pointer is not nice - but since this traverses
C code other solutions (like passing an index into the list) seemed even worse.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This vastly simplifies our handling of devive information as we simply use
what is already in the descriptor. This way we do not duplicate information
about USB devices in the QMLManager.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A number of our messages were misleading in the no cloud case. This should help
to reduce confusion.
Adding the save_dives() call after creation of the repo appears to help us have
a valid repo in place.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Grammar-nazi ran
git grep -l 'indexes' | xargs sed -i '' -e 's/indexes/indices/g'
to prevent future wincing when reading the source code.
Unfortunatly, Qt itself is infected as in
QModelIndexList QItemSelection::indexes() const
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The HID devices and the Atomics Aquatics Cobalt cannot work on Android
right now. We should claim to support them.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This creates up to two undo events. This seems like such a small issue that
it's not worth creating yet another undo command for this.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While this has worked fine for a long time, it now suddenly seems to trigger
crashes. So let's not do that (there are a number of discussions online that
talk about how this could indeed lead to BadThings(tm) happening.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If we remove the newest dive from its trip, it becomes inaccessible in the app,
but the dive data saved to disk appears to be correct.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since we are using the existing command infrastructure, this isn't specific to
undoing a delete.
This commit renames the function and removes its use in the UI, the next commit
will then add the generic undo to the UI.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Since the divelist model is now placed on top of the common
models, we can directly reset the filter.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Command that just swaps two dives. This is rather complex,
as for example a dive site might be created.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The whole load from cloud thing will have to be audited. It appears
to me that there are way too many model resets...?
The only thing that is left is dive editing. Let's do that next.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using the model, copy the code we have in the desktop version
which manually creates a 15m/40min dive and passes that to the addDive
undo command.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
After swiping through the dive list, select the currently visible dive.
Thus, the dive is highlighted in the overview pane.
The connection with the QMLManager feels atrocious, but I would prefer to have
as little logic in QML as possible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since we want to add a second model, but not have to manage two models
everywhere, create a class MobileModels that contains both of the models. When
calling reset() on that class, it will reset both of the models, etc.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a small step in unifying mobile and desktop.
I'm unsure whether it is correct to play this via the QMLManager or whether we
should call form QML directly into the model?
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The goal is to send the signal for the correct dives / divesites
and thus not having to reload the whole model.
Right now the mobile UI does not yet catch the diveSiteChanged signals.
[Dirk Hohndel: small fix to ensure that we trigger a save to storage]
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Still buggy: Removing a dive followed by undo shows the wrong dive
in the list. But clicking on it gives the correct dive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The macro NOCLOUD_LOCALSTORAGE creates the path to the local git
repository as a C-string. None of the users were freeing the string
and thus leaking memory.
Replace the macro by an inline function that creates a QString
and pass down to C-functions using the qPrintable() macro.
Note that every qPrintable() invocation does a UTF16->UTF8
conversion. This could be avoided by either using a std::string
or a QByteArray. However, we are talking about microseconds of
CPU time in operations that typically take seconds. Not worth
it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If we detect any of the known PID/VID combinations, use 'usb-serial' instead of
'FTDI'. Also add the now supported additional PID/VID combinations.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
At least in those cases where we are sending a divesChanged signal we can
easily check if the cache was properly invalidated. Of course this won't help
in cases where we don't notify the dive list about changes, either.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This is a quick hack to reduce the noise in the log file when chasing other
bugs. Maybe this should not be enabled on release builds, but right now I don't
think the harm that having this in would do.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
I experienced weird crashes that seemed timing-related when
using the filter. Therefore, remove the multi-threading thing.
So far no more crashes, but keep a close eye on that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add a combo-box where the user can switch between "fulltext",
"people" and "tags" filtering. Connect the combobox to the
already existing filter-code.
Dirk: make combo-box smaller by using a smaller font and restricting
the width. Setting both maximum and preferred widths gives more
consistent results.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A tablet or phone is not a computer. What would you do with a CSV or TeX/LaTeX
file on a phone. Yeah, I get it, feature parity.
This should never have been merged.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
exportFunc was a collections of functions for exporting dive data.
It had no state, therefore there is no reason for it to ever be
instantiated.
Simply remove the class. Rename the saveProfile function to
exportProfile so that all export functions start with "export".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When the cylinders became a dynamic data structure, a get_cylinder() call
suddenly could return a NULL pointer. So use get_or_create_cylinder() for the
first call when parsing the user's data.
Also, deal with an oddity where the string lists look different because an
empty list technically isn't the same as a list with one empty string.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
A lot of whitespace issues have snuck in recently, this just cleans those up so
that I don't need to hand-edit patches every time I touch this file (since
QtCreator automatically fixes whitespace when I make changes).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Simply replace it with QLatin1String. There is a tiny performance penalty,
but none of that code would care.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Remove string version of unit_system, duration_units, length, pressure,
temperature, vertical_speed_time, and volume, including tests and make signals
strongly typed in C++
Signed-off-by: jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Switch oldStatus from qmlprefs to qmlmanager
This is the last use of QMLPrefs, which can later be safely removed.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
oldStatus() is kept in qmlPrefs during the login process to allow
for a couple of special cases:
- if a user have added dives in NO_CLOUD mode and changes to use the
cloud these dives are copied to the Cloud, instead of being lost.
- if a user does a bailout from the login process (this should not
happen anymore) the old status is restored.
The pure solution would be to have oldStatus at the top level (e.g.
a property in qml) and only change it when actually being in the
login process, however due to way the qmlmanager is written it proved
very difficult and not worth the effort.
In order to be able to remove qmlPrefs, oldStatus are moved to
qmlManager.
This commit only contain the creation of the variable and the supporting
code.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
call setOldStatus() and set_filename().
saveCredentials() will adjust email and password.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This setCredentialStatus() will never do anything, because qPrefCloudStorage
is identical to prefs.cloud_verification_status, and can thus be
safely removed.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Revert to the divelist by setting oldStatus() directly to
set_cloud_verification_status()
This is done to further limit the use of setCredentialStatus() and
prepare to remove qmlPrefs.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Update revertToNoCloudIfNeeded() to not use setCredentialStatus() by adding an
extra call to setOldStatus()
setOldStatus() is called in setCredentialStatus together with
set_cloud_verification_status() therefore these 2 calls need to added when
removing setCredentialStatus().
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
qmlprefs::setCredentialStatus() basically only does something when called with
CS_NOCLOUD.
A number of setCredentialStatus() calls happen where status cannot be
CS_NOCLOUD, and therefore setCredentialStatus() can be safely replaced with
set_cloud_verification_status()
This limits the use of qmlprefs::setCredentialStatus(), but there are still a
couple of more complicated calls.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace all credentialStatus() with cloud_verification_status()
Where both prefs.credentialStatus and
PrefCloudStorage.cloud_verification_status are being set, remove
prefs.credentialStatus.
These replacements are valid since credentialStatus() is a simple
envelope over cloud_verification_status().
Also remove qmlPrefs::credentialStatus() from qmlPrefs (mostly to ensure no
replacements was forgotten).
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
cloudPin does only have the values "" and NULL, so replace cloudPin()
with "" in csa->backend() call
remove setting of cloudPin to ""
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
cloudPin is only set to "" and NULL, therefore and "if" checking if
cloudPin is not empty will never have affect.
Remove else part.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Add pin parameter to saveCredentials() thereby having all info about
credentials in one function call.
Add "" as pin in saveCredentials() - main.qml, when verifying
credentials.
replace verifyCredentials() with saveCredentials() in the register
button on the pin page.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace prefs.cloudPassword with PrefCloudStorage.cloud_storage_password in QML
Replace QMLPrefs.....cloudPassword with PrefCloudStorage::cloud_storage_password in C++
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace prefs.cloudUserName with PrefCloudStorage.cloud_storage_email in QML
Replace QMLPrefs.....cloudUserName with PrefCloudStorage::cloud_storage_email in C++
Signed-off-by: Jan Iversen <jani@apache.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Call saveCredentials with username/password to avoid first
setting the two and then calling.
Change saveCredentials() to use newUser, newPassword.
Signed-off-by: Jan Iversen <jani@apache.org>
This adds a tab for dive log - related preferences.
A suitable test programs is still required.
Signed-off-by: willemferguson <willemferguson@zoology.up.ac.za>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
WARNING: multi directory commit, needed to secure it builds.
move the core/exportfuncs.* to backend-shared.
update backend-shared/CMakeLists.txt to generate backend-shared lib
update CMakeLists.txt to include backend-shared lib in link process.
update ios project to reflect new directory
Signed-off-by: Jan Iversen <jan@casacondor.com>
LOG_STP is on longer providing the data needed, since a lot of the startup
is indirectly in QML, furthermore using the xcode project and running profiler
gives much more detailed information
Signed-off-by: Jan Iversen <jani@apache.org>
Remove "TO BE IMPLEMENTED" and add call doUpload
Connect signal to signal in QMLManager to avoid registring the
upload class.
Signed-off-by: Jan Iversen <jan@casacondor.com>
Since we now have a selection.c translation unit, put the selection-
related functions there.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Add enum with different export types (used to signal which type
of export QML desires).
Add QML export functions (one for file and one for upload to web)
Signed-off-by: Jan Iversen <jan@casacondor.com>
This is even easier and more obvious than copying the logs on the About page
and then manually creating an email and pasting those logs.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of accessing the cylinder table directly, use the get_cylinder()
function. This gives less unwieldy expressions. But more importantly,
the function does bound checking. This is crucial for now as the code
hasn't be properly audited since the change to arbitrarily sized
cylinder tables. Accesses of invalid cylinder indexes may lead to
silent data-corruption that is sometimes not even noticed by
valgrind. Returning NULL instead of an invalid pointer will make
debugging much easier.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using fixed size arrays, use a new cylinder_table structure.
The code copies the weightsystem code, but is significantly more complex
because cylinders are such an integral part of the core.
Two functions to access the cylinders were added:
get_cylinder() and get_or_create_cylinder()
The former does a simple array access and supposes that the cylinder
exists. The latter is used by the parser(s) and if a cylinder with
the given id does not exist, cylinders up to that id are generated.
One point will make C programmers cringe: the cylinder structure is
passed by value. This is due to the way the table-macros work. A
refactoring of the table macros is planned. It has to be noted that
the size of a cylinder_t is 64 bytes, i.e. 8 long words on a 64-bit
architecture, so passing on the stack is probably not even significantly
slower than passing as reference.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When we change the filter string, we need to make sure that the collapsed model is
also aware of the change.
Similarly, instead of just calling resetFilter and directly changing the core
data structures, we need to set the filter to the empty string which ensures
that all three models get notified and the view updates correctly.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While the error that caused this to happen should be fixed, we should at least
let the user know if things failed catastrophically and we can't figure out how
to save their data.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If there is a local cache, we at least once successfully accessed the cloud, so
this is a valid cloud based git tree.
Without this change we run into a subtle bug: after a fresh install, or when
switching users, when the cloud data is accessed the very first time, we don't
remember that this was indeed loaded from the cloud. So if we then download
from a dive computer or make any other changes to the dive log, we cannot save
those dives to cloud storage - but we fail silently doing so. Which to the user
would look that inexplicable data loss.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The old code was ill named - this way the busy spinner itself
becomes reusable with a reasonable set of function names.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
While on mobile there should always be only one selected dive, it's very
cheap to make sure that amount_selected is tracked correctly. The
incrementing of amount_selected is done in case an invalid id is passed
in.
Suggested-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
To make this class available from QMLManager, the run_ui()
function would create the object and then set a pointer in
QMLManager. It works, but is inconsistent with the rest of
the code. Therefore, make it a classical singleton class,
which is generated on demand.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Clearing the dive data directly in the core leaves us with an
inconsistent model. Therefore, clear via the model.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of using the GpsLocation singleton in GpsListModel::update()
to extract the gpsTrackers, pass the gpsTrackers as function argument.
The caller has direct access to the GpsLocation object anyway and this
make things less entangled.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The way we handle singletons in QML, QML insists on allocating the
objects. This leads to a very idiosyncratic way of handling
singletons: The global instance pointer is set in the constructor.
Unify all these by implementing a "SillySingleton" template. All
of the weird singleton-classes can derive from this template and
don't have to bother with reimplementing the instance() function
with all the safety-checks, etc.
This serves firstly as documentation but also improves debugging
as we will now see wanted and unwanted creation and destruction
of these weird singletons.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This addresses the following warning when running the mobile app:
INFO: QQmlExpression: Expression qrc:/qml/DownloadFromDiveComputer.qml:339:5 depends on non-NOTIFYable properties:
INFO: QMLManager::DC_forceDownload
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Instead of handing a reference-to-dive to QML, prerender all the needed
properties and store them as values in DiveObjectHelper. Exception:
- date(): generated from timestamp
- time(): generated from timestamp
- cylinderList(): does not depend on dive anyway and should be made
static.
This hopefully avoids the random mobile crashes that we are seeing.
Clearly, this code needs to be optimized, but it is a start.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since DiveListModel does not keep its own list of dives anymore,
insertDive() doesn't use the DiveObjectHelper argument. Remove it.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of creating a pointer-to-DiveObjectHelper in commitChanges,
use a normal object. Thus, we don't have to think about ownership
issues with respect to this object.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The clear()/addAllDives() pair was bogus as the former didn't
clear the model (this is not possible anymore - the model
represents the core dive list) and the latter readded all
dives again.
Replace this by a reload() function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
It seems crazy to simply assume that the later code can successfully
untangle the various states that the credentials can be in - let's just
stay on the credentials enrty page until we have verified credentials.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
This should do the right thing in the various situations of correct &
verified credentials, credentials needing PIN verification, invalid
email/password combination, incorrect PIN, correct PIN.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
If a dive has no weightsystems, editing the weight system has to add
a new entry in the table. Implement that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Always keep the dive site model up to date when adding dive sites.
This hopefully avoids creation of invalid indexes followed by crashes.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declarations of the "report_error()" and "set_error_cb()"
functions and the "verbose" variable to errorhelper.h.
Thus, error-reporting translation units don't have to import the
big dive.h header file.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Replace the fixed-size weightsystem table by a dynamically
relocated table. Reuse the table-macros used in other parts
of the code.
The table stores weightsystem entries, not pointers to
weightsystems. Thus, ownership of the description string is
taken when adding a weightsystem. An extra function adds
a cloned weightsystem at the end of the table.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These functions were spread out over dive.c and divelist.c.
Move them into their own file to make all this a bit less monolithic.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
I'm not sure this is actually relevant for anything any more, but this
adds the USB device ID's for the Scubapro G2 Console and HUD versions.
It also fixes things to use the proper vendor name (a bit too much
cut-and-paste, where the code said "Suunto" instead of "Scubapro").
The real device ID changes are in libdivecomputer, this is just the
Android xml list for recognized USB devices that likely nobody really
uses.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The LocationInformationModel used to sort its entries and was completely
rebuilt after every change. This makes it rather complex to support
incremental changes.
Instead, keep LocationInformationModel sorted by UUID so that indexes
are consistent with indices in the core dive site table.
Implement sorting by other columns than name and enable sorting in the
dive site view.
Finally, don't cache the list of dive site names for the mobile app,
since that would also need some rather convoluted methods of keeping
the list up to date. Calculate it on the fly.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of setting dive->dive_site directly, call the
add_dive_to_dive_site() and unregister_dive_from_dive_site()
functions. In the parser this turned out to be a bit tricky.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the declaration of these functions to "file.h" and "parse.h"
according to the translation unit they are defined in. Thus, not
all users of "dive.h" have to suck in "sqlite3.h".
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since the UUID will be overwritten on save and is only used on save
and load, set it only on save or load. For other created dive sites,
leave the UUID field uninitialized.
This means that the UUID will change between saves. Let's see how
the git saver handles that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
As opposed to dive trips, dive sites were always directly added
to the global table, even on import. Instead, parse the divesites
into a distinct table and merge them on import.
Currently, this does not do any merging of dive sites, i.e. dive
sites are considered as either equal or different. Nevertheless,
merging of data should be rather easy to implement and simply
follow the code of the dive merging.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To extend the undo system to dive sites, the importers and downloaders
must not parse directly into the global dive site table. Instead,
pass a dive_site_table argument to parse into.
For now, always pass the global dive_site_table so that this commit
should not cause any functional change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To enable undo of dive site functions, it is crucial to work
with different dive site tables. Therefore add a dive site table
parameter to dive site functions. For now, always pass the global
dive site table. Thus, this commit shouldn't alter any functionality.
After this change, a simple search for dive_site_table reveals all
places where the global dive site table is accessed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
See https://www.kdab.com/goodbye-q_foreach/
This is reduced to the places where the container is const or can be made const
without the need to always introduce an extra variable. Sadly qAsConst (Qt 5.7)
and std::as_const (C++17) are not available in all supported setups.
Also do some minor cleanups along the way.
Signed-off-by: Rolf Eike Beer <eike@sf-mail.de>
printGPSCoords() returned a newly allocated C-style string. Most
callers simply made a QString out of it and freed the C-style string.
This is paradoxical, as printGPSCoords internally works with QStrings
and converts them to C-style on return.
Therefore, let printGPSCoords() return a QString and create a
printGPSCoordsC() wrapper for the two C-callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The printGPSCoords() function returns a copied C-style string. Since
the owndership is transferred to the caller, the correct return type
is "char *" instead of "const char *".
Thus a number of casts when calling free can be removed.
Moreover a number of callers didn't free the string and thus were
leaking memory. Fix them. Ultimately we might want two versions
of the function: one for QString, one for C-style strings.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
And offer an option to show all devices in the settings. This is intentionally
not stored in the preferences as this should never be needed. We don't support
BT or BLE dive computers that we don't recognize. This is a last resort in case
a new firmware were to change the name or some other weird issue causes us not
to recognize a dive computer - and that should be fixed instead of worked
around.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
process_imported_dives() takes four boolean parameters. Replace these
by flags. This makes the function calls much more descriptive. Morover,
it becomes easier to add or remove flags.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since process_imported_dives() can add dives to a newly generated
trip, this need not be done in the downloading code. This makes
data flow distinctly simpler, as no trip table and no add-new-trip
flag has to be passed down to the libdivecomputer glue code.
Moreover, since now the trip creation is done at the import step
rather than the download step, the latest status of the "add to
new trip" checkbox will be considered.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If this flag is set, dives that are not assigned to a trip will
be assigned to a new trip. This flag is set if the user checked
"add to new trip" in the download dialog of the desktop version.
Currently this is a no-op as the dives will already have been
added to a new trip by the downloading code. This will be removed
in a subsequent commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Split the process_imported_dives() function in two:
1) process_imported_dives() processes the dives and generates
a list of dives and trips to be added and removed.
2) add_imported_dives() calls process_imported_dives() and
does the actual removal / addition of dives and trips.
The goal is to split preparation and actual work, to
make dive import undo-able.
The code adds extra checks to never merge into the same
dive twice, as this would lead to a double-free() bug.
This should in principle never happen, as dives that
compare equal according to is_same_dive() are merged
in the imported-dives list, but perhaps in some pathologival
corner-cases is_same_dive() turns out to be non-transitive.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When importing log-files we generally want to merge trips. But
when downloading and the user chose "generate new trip", that
new trip should not be merged into existing trips.
Therefore, add a "merge_all_trips" parameter to process_imported_dives().
If false only autogenerated trips [via autogroup] will be merged.
In the future we might want to let the user choose if trips
should be merged when importing log-files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The old way of merging log-files was not well defined: Trips
were recognized as the same if and only if the first dives
started at the same instant. Later dives did not matter.
Change this to merge dives if they are overlapping.
Moreover, on parsing and download generate trips in a separate
trip-table.
This will be fundamental for undo of dive-import: Firstly, we
don't want to mix trips of imported and not-yet imported dives.
Secondly, by merging trip-wise, we can autogroup the dives
in the import-data to trips and merge these at once. This will
simplify the code to decide to which trip dives should be
autogrouped.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
To allow parsing into arbitrary trip_tables, add the corresponding
parameter to the parsing functions and the parser state. Currently,
all callers pass the global trip_table so there should be no change
in functionality. These arguments will be replaced in subsequent commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently trips are added to the global trip table. If we want to
make dive-import undoable, we should be able to parse trips of a
log-file into a distinct table. Therefore, add a trip_table
parameter to
- insert_trip()
- create_and_hookup_trip_from_dive()
- autogroup_dives()
- unregister_trip()
- remove_dive_from_trip()
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Currently, all trips are kept in a linked list. Replace the list
by a table in analogy to dive_table. Use this to keep the trip_table
sorted as suggested by dump_trip_list(). When inserting a trip into
the table do that after adding the dives, to avoid warnings coming
out of dump_trip_list().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Rename
- dive_get_insertion_index() -> dive_table_get_insertion_index()
- unregister_dive_from_table() -> remove_from_dive_table()
- get_idx_in_table() -> get_idx_in_dive_table()
- sort_table() -> sort_dive_table()
This will make it more straight-forward to generate these functions
from macros.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Commit 68961a169e made it impossible
to edit a dive site on mobile if a dive-site was already set: If
divesite was non-null, no actions were taken. Remove the conditional.
Reported-by: Miika Turkia <miika.turkia@gmail.com>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For some devices the BT device name is different from the product name.
Make sure that name is available to the mobile UI. This helper fills it
in from the scan data (based on the device address).
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Apparently this does the trick of updating the dive list when pasting
data on mobile. Tnx janmulder.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
DCDeviceData was using that weird pattern where the instance
variable was set in the constructor. There is no apparent
reason to do so, therefore convert to a "normal" singleton.
Access that directly in QMLManager instead of saving it in
a member variable first.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The only remaining use of the tripflag was to mark dives that
were removed explicitly from a trip, i.e. shouldn't be autogrouped.
Therefore replace the enum by a simple boolean.
Currently, there is no way of unsetting the notrip flag. But this
shouldn't result in a user-visible change.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The dives of each trip were kept in a list. Replace this by a
struct dive_table. This will make it significantly easier to
keep the dives of a trip in sorted state.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were two versions of the insert_trip() function: one
would merge trips if a trip with the same date already existed,
the other wouldn't. The latter was introduced with the dive-list
undo work.
The problem is that the "date" of a trip (i.e. the first dive)
seems ill-defined as this is a volatile value. Moreover in
the context of making dive-import undoable this is a very
dangerous notion, as the caller needs control over when the dives
are added to a trip.
Therefore, unify these two functions and never merge trips.
The decision on merging dives now has to made by the caller.
This will be implemented in a future commit.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Naturally the paste button should be disabled, if this is the case, but
it still makes sense to do this check.
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
Initial implementation/prototype of copy-paste support for
Subsurface-mobile. The UI part is really lacking; right now the copy
button is initially visible and paste is achieved by long press on a
dive and clicking the paste button when it appears. Delete is currently
not possible at all, as I just failed to layout the buttons properly
using QML. It just sounds so simple, to put all the copy-paste-delete
buttons next to each other...
The data to be copied is currently hard-coded. A dialog to choose
inteded fields would be nice, but it'll take quite a bit effort to get
used to QML enough to be able to hack something together.
Anyway, this seems to work, even though the UI is not always reflecting
the paste without switching dives (when testing on laptop).
Signed-off-by: Miika Turkia <miika.turkia@gmail.com>
While not something that many will use, editing a dive on
Subsurface-mobile should not result in data loss.
This makes the divemaster field behave in the same way as the buddy
field with regards to multiple entries.
Fixes#1853
Signed-off-by: Joakim Bygdell <j.bygdell@gmail.com>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Replace the UUID reference of struct dive by a pointer to dive_site.
This commit is rather large in lines, but nevertheless quite simple
since most of the UUID->pointer work was done in previous commits.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This changes more of the dive-site interface to return pointers
instead of UUIDs. Currently, most call sites directly extract
UUIDs afterwards. Ultimately, the UUIDs will be generally replaced
by pointers, which will then simplify these callers.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
