If we download a first dive computer and add a dive site to the dive (by
setting a location name for example), and then download from another
dive computer that provides us with GPS data, we should keep the
existing dive site information, but add the GPS data from the freshly
downloaded dive computer.
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Before making the cylinder-table dynamic, dives always
had at least one cylinger. When such a dive is displayed,
the TabDiveInformation class calls per_cylinder_mean_depth().
If there are no samples, this function generates a "fake
profile" with fake_dc(). Thus, effectively dives always
had samples once the user was displaying them.
When the cylinder-table was made dynamic, dives without
cylinders were supported. This can notably happen, when
importing from CSV (this could actually be a bug).
per_cylinder_mean_depth() exits early in that case and
doesn't create a fake profile. This lead to crashes
of the profile-widget, which were fixed in 6b2e56e513.
Non-sample dives were now shown with the Subsurface-logo.
To restore the previous behavior, genarate a fake profile
for sample-less dives in fixup_dive(), which is called
anytime a dive is loaded or imported. This seems to
have been the intention anyway and this worked only
"by chance". This will make a few fake_dc() calls obsolete,
but so be it.
Since fake profiles are now generated on loading,
the parse-tests need to be fixed to account for that.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
When merging two dives, the higher CNS value was taken. This could
result in inconsistent CNS values if two dives were merged where
one dive's CNS was calculated from a "fake profile", i.e. a dive
without dive-computer profile. In that case, the most conservative
value (all time spent at the bottom) was assumed. The merged dive
then consisted of the dive-computer profile and the conservative
CNS estimate.
This is fixed by setting the CNS value to "0" after merging,
which means "unknown". The correct value will then be recalculated
in "fixup_dive" from the actual sample data.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The code will happily perform out-of-bound accesses if
pressure-sensors refer to non-existing cylinders. Therefore,
sanitize these values in fixup_dive(), which is called
everytime a dive is loaded or imported.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The sensor member of sample refers to a cylinder from which
the pressure was read. However, some dives don't even have
a cylinder. Therefore, introduce a special NO_SENSOR value
for these dives. Since the cylinder is given as a uint8_t,
0xff seems to be a sensible choice.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This is adding the capability to select 'Dive number' and 'Date / Time'
in the 'Copy dive components' dialog, and then copy them into the
clipboard.
When using 'Paste dive components, these values will then be pasted into
the selected dive(s).
This is intended to help with workflows that import dive information
from two different sources, like general information from another
logging program, and CCR ppO2 sensor readings from a unit log, and then
stitch them together into one cohesive entry with all data per dive.
Copied data is also output into formatted text when pasting the
clipboard outside of the application:
```
Dive number: 401
Date / time: Sun 2 May 2021 12:00 AM
```
No translations have been added as of now - I could not find any
information on how strings are translated for this project.
Signed-off-by: Michael Keller <github@ike.ch>
The make_first_dc() function clones a dive with a certain dive
computer moved to the front. This is used by the
MoveDiveComputerToFront undo command.
make_first_dc() calls invalidate_dive(). However, the undo
command does that by itself on every undo/redo. Thus,
remove the call in make_first_dc().
Aside from consistency, the goal is to move invalidate_dive()
to command/* so that we can be more aggressive about the whole
topic: Store only "const dive *" pointers and thus force any
writing access to explicitly invalidate the dive cache.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Don't access the global displayed_dive variable in an effort
to make the profile reentrant.
Note that this still accesses the global dc_number variable,
which will likely have to be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The way I understand, the PASCAL pressure unit is used to parse
obscure dive logs. However, there is no support in the UI for
using Pa as pressure unit. Therefore remove reading / writing
this unit to git divelogs.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
in_planner() is problematic, since it is uses desktop-only
application state. Since the cylinder-model already has
an appropriate inPlanner flag, use this instead.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When breathing pure oxygen and considering it not
narcotic, there is not maximal narcotic depth and
the formula divides by zero. So better, handle this
case separately.
Fixes#3080
Signed-off-by: Robert C. Helling <helling@atdotde.de>
Since dive.c is so huge, split out divecomputer-related functions
into divecomputer.[c|h], sample.[c|h] and extradata.[c|h].
This does not give huge compile time improvements, since
struct dive contains a struct divecomputer and therefore
dive.h has to include divecomputer.h. However, it make things
distinctly more clear.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The function
1) was misnamed: it determined the time of the first selcted dive.
2) had only one caller.
3) would crash if there was no selected dive.
Let's just fold the functionality into the caller. It's a one-liner
anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
In an effort to reduce the size of dive.h and dive.c, break out
the event related functions. Moreover event-names were handled
by the profile-code, collect that also in the new source files.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The device nodes are created for all DCs, when importing the
dives. There is no point in creating only the device node for
the first DC in fixup_dive().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Instead of accessing the global device table directly, add a parameter
to all device-table accessing functions. This makes all places in
the code that access the global device table grep-able, which is
necessary to include the device-table code in the undo system.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These will be recalculated from the pressures in fixup_dive()
anyway.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
When merging cylinders pressures derived from samples were taken
as maximum of the start and minimum of the end pressure, which
makes sense, since we believe that this is the same cylinder.
However, for manually entered pressures, this was not done.
Moreover, when one dive had manual pressures and the other only
pressure from samples, the manual pressure was taken. However,
that could have been the wrong one, for example if the end
pressure was manually set for the cylinder of the first part of
the dive, but not the last.
Therefore, improve merging of manuall set pressures in two ways:
1) use maximum/minimum for start/end pressure
2) if the pressure of one cylinder was manually set, but not for
the other, complete with the sample pressure (if that exists).
Fixes#2884.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There were helper functions to access O2 and He component fractions.
Add another one for N2. Indeed, this can be used in three cases, where
N2 was deduced indirectly.
Moreover, add a general accessor with a gas_component argument.
This will be used by the filter code to filter for gas components.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The cylinder model is used both in the planner and the
equipment tab. We have three preferences for the pO2 that
is used to compute MOD: In the planner, there is one for
the bottom part of the dive and another one for deco.
Those are set in the planenr UI. There is another value,
controlled in the Tec Prefernces. That one should be
used in the equipment tab rather than the one from
the planner.
Fixes#2984
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The function was called on a freshly copied dive, which has its git cache
invalidated automatically in copy_dive().
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
delete_divecomputer had legacy code, which
1) invalidated the git dive cache
2) made sure that the dive computer was not displayed anymore
However, both callers called on a freshly copied dive, which
has its dive cache invalidated in copy_dive() and can't be
the currently displayed dive. Therefore, this code is dead
code and can be removed.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is a number_of_computers() function which does
the same thing with two exceptions:
1) checks for null-dive
2) returns an unsigned int
Replace calls to count_divecomputers() by calls to number_of_computers().
In one case, the return type makes a different - add a cast to int there.
Ultimately, we should probably change the dc_number to signed int
throughout the code.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
get_dive_country() was essentially a reimplementation of taxonomy_get_country().
Let's just use the already existing function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This adds a common macro to convert salinity (which is
given as a density in terms of g per 10l) to a specific
weight with units of mbar / mm = bar / m that is used
to translate between pressures and depths.
The weired factor of 10 (from the unusual unit of salinity)
is included in the macro. It is there for historical reasons,
as it goes back to 05b55542c8 from 2012 where it was introduced
in code for downloading from Uemis dive computers.
Now, salinity appears in too many places to easily remove
this unconventional factor of 10 everywhere without breaking
to many things (including various dive computer downloads).
Signed-off-by: Robert C. Helling <helling@atdotde.de>
When the dive has no explicity salinity, our conversion
between pressure and depth assumed salt water. Make this
explicity by using the corresponding macro.
When the planner starts and no salinity is set explicity,
set the water type chooser to salt water to reflect
our default assumption.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
The merge_events() function was subtly and not-so-subtly broken in a
couple of ways:
- in commit 8c2383b49 ("Undo: don't modify source-dives on merge"), we
stopped walking the event list after we merged the first event from a
dive when the other dive computer had run out of events.
In particular, this meant that when merging consecutive dives, the
second dive only had the first event copied over to the merged dive.
This happened because the original code just moved the whole old list
over when there was nothing left from the other dive, so the old code
didn't need to iterate over the event list. The new code didn't
realize that the pointer movement used to copy the whole rest of the
list, and also stopped iterating.
In all fairness, the new code did get the time offset right, which
the old code didn't. So this was always buggy.
- similarly, the "avoid redundant gas changes" case was not handled for
the "we ran out of events for the other dive computer" case.
This fixes both issues.
Cc: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A while ago, we introduced a preference whether O2 should
be considered narcotic. We used this when computing
best mix or when entering the He content via MND. But
we forgot to make the displayed MND depend on this
preference. This patch add this.
Fixes#2895
Signed-off-by: Robert C. Helling <helling@atdotde.de>
We did something really horribly wrong when merging cylinders. It's
been broken since commit 7c9f46a ("Core: remove MAX_CYLINDERS
restriction"), and used some really strange logic.
This rewrites the logic to be (I think) a bit more easy to understand.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
The last caller was removed in 7eb422d988.
Since this is the only caller of dive_within_time_range(), remove that
function as well.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
This one is a bit hairy, because two things might happen if the
picture has a geo location:
- A dive gets a newly generated dive site set.
- The dive site of a dive is edited.
Therefore the undo command has to store keep track of that.
Oh my.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Move the two functions create_picture() and picture_check_valid_time()
from dive.c to picture.c.
This might be somewhat questionable, as these functions are not purely
picture related, but check the nearest selected dives, etc. However,
dive.c is so huge, that slimming it down can't hurt. Moreover,
getting the nearest selected dive is more divelist- than dive
functionality anyway.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
If we want to make addition of pictures undoable, then create_picture()
must not add directly to the dive. Instead, return the dive to which the
picture should be added and let the caller perform the addition.
This means that the picture-test has to be adapted.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
We can do the same with get_picture_idx(). Yes, it is a bit more
unwieldy. However a full reimplementation seems not worth it.
We could make this a one-liner helper function though.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
For consistency with equipment, use our table macros for pictures.
Generally tables (arrays) are preferred over linked lists, because
they allow random access.
This is mostly copy & paste of the equipment code.
Sadly, our table macros are quite messy and need some revamping.
Therefore, the resulting code is likewise somewhat messy.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Since this doesn't touch struct dive, dive.c is not an appropriate
place for this function.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
These can be useful in a printed divelog, especially if the
log entry is also showing weight and exposure suit.
Signed-off-by: Monty Taylor <mordred@inaugust.com>
When we had fixed-sized cylinder arrays, the planner used the last
empty cylinder for "surface air". This was not recognized by the UI
as a separate cylinder, because "empty cylinder" was the sentinel for
the end of the table. The conversion to dynamically sized cylinder
tables broke this code: everytime the surface segment is changed,
a new dummy cylinder is added, which is visible in the UI.
As a very temporary stop-gap fix, emulate the old code by creating
a cylinder and then setting the end-of-table to before that cylinder.
This means that we have to loosen the out-of-bound checks.
That's all very scary and should be removed as soon as possible.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
Arguably, returning 0 for a dive with no cylinders is wrong, since the
0 is a valid cylinder id, however that cylinder doesn't exist. Instead,
return -1. All callers of explicit_first_cylinder() return early anyway
for dives with no cylinders.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
The planner does not know about events except gas
changes. But if the dive comes from the log, we
should preserve the dive computer events. At least
those that happend before we started to delete
waypoints to let the planner take over.
Signed-off-by: Robert C. Helling <helling@atdotde.de>
This fixes a bug: when deleting a picture when multiple dives
were selected, possibly the wrong dive was invalidated.
Thus, the dive wouldn't have been saved to the git repository.
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>
There is the free_picture() function with the same functionality.
The compiler/linker should recognize that and remove the duplicate
code, but still...
Signed-off-by: Berthold Stoeger <bstoeger@mail.tuwien.ac.at>